MWC 概述
Aluminum electrolytic capacitors belong to the broader capacitor hierarchy, which includes ceramic, film, tantalum, and supercapacitor technologies. Within that hierarchy, aluminum electrolytic capacitors are distinguished by their combination of polarity, capacitance capability, and practical cost. They are commonly used where a larger capacitance value is required than ceramic capacitors can reasonably provide. Because they are polarized, correct orientation is essential when placing them in a circuit.
The defining MWC feature is its snap-in aluminum electrolytic construction. The manufacturer identification and component description associate this designation with Meritek Electronics Corporation, while the documented format identifies the component as a snap-in capacitor rather than a surface-mount ceramic device or a chip resistor. Board layout must therefore account for the physical lead spacing, body diameter, polarity marking, and insertion clearance associated with the exact ordered configuration.
In operation, an aluminum electrolytic capacitor converts electrical energy into electrochemical energy at its dielectric interface. The device can smooth voltage variation, support regulated power rails, and reduce conducted noise when correctly polarized and paired with suitable companion components. Its practical effectiveness depends on capacitance, rated voltage, ESR, ripple-current capability, temperature, leakage, and lifetime, all of which must be confirmed against the ordering document for the selected MWC configuration.
Typical applications for this component class include power-supply input filtering, DC-DC converter output buffering, industrial control boards, audio equipment, display systems, and general-purpose electronics repair. The MWC can suit through-hole board designs when its dimensional and lead configuration match the PCB. It should not be selected for a location that requires a surface-mount footprint, and it should not be used where the circuit's ripple, temperature, lifetime, or vibration requirements exceed the component ratings.
Designers should verify the exact MWC series number, case size, capacitance, voltage rating, polarity, and temperature rating before layout release. Maintain the manufacturer's specified lead spacing and body clearance, observe the positive and negative markings, and avoid applying mechanical stress to the terminals. Where a switching converter creates high ripple current, supplement the capacitor with ceramic high-frequency bypass capacitors and review ripple-current and temperature rise at the actual operating load.
This product page distinguishes the confirmed MWC identity and snap-in aluminum electrolytic construction from the many unrelated MWC search results. It also organizes sourcing, technical comparison, design, and selection guidance around the component form and the checks required before placing a snap-in capacitor on a printed circuit board. Request a Quote for configuration-specific availability, lead time, and commercial support.
直接替换替代料: MWC ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料MWC 最大额定值与电气特性
| Component Type | Snap-In Aluminum Electrolytic Capacitor |
| Manufacturer | Meritek Electronics Corporation |
| Termination and Lead Style | Snap-in |
| Polarity | Aluminum electrolytic, polarized |
| 安装类型 | Through-hole snap-in |
| Datasheet Length | 2 pages |
| Datasheet File Size | 292 KB |
MWC standard 引脚配置指南
MWC(standard 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: MWC.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MWC 适用于 6 应用s: Industrial Power-Supply Filtering, DC-DC Converter Output Buffering, Audio Power-Supply Decoupling, Control-Board Bulk Filtering, LED Driver Rail Smoothing, Legacy Through-Hole Equipment Repair.
Industrial Power-Supply Filtering
The Meritek Electronics Corporation MWC is suitable for a through-hole input-filter or DC-bus position in an industrial power supply when its ordered voltage, capacitance, ripple-current, and temperature ratings satisfy the design. A snap-in aluminum electrolytic capacitor can provide bulk energy storage and reduce low-frequency supply variation. Place it close to the power entry and regulator connections while observing polarity and the manufacturer’s clearance requirements. Because MWC denotes a series rather than one complete ordering code, the engineer must select the correct case size, capacitance, voltage rating, and lead spacing. The final design should also account for ripple-current heating, nearby heat sources, electrolyte aging, and the vibration conditions common in industrial equipment.
DC-DC Converter Output Buffering
MWC can be used on the output side of a DC-DC converter to support load transients and reduce low-frequency output ripple when its electrical ratings match the converter operating condition. The polarized aluminum electrolyte construction is appropriate for a grounded DC output rail, but the capacitor does not eliminate all switching ripple by itself. A ceramic capacitor placed directly at the load or converter output should generally provide complementary high-frequency bypass. Before layout release, verify the MWC capacitance, rated voltage, ESR, ripple-current capability, lead spacing, and orientation. Confirm also that ambient temperature and expected service life remain inside the ordered capacitor’s limits, especially where the converter operates near maximum load for extended periods.
Audio Power-Supply Decoupling
A snap-in aluminum electrolytic MWC can be used for bulk decoupling in an audio power rail, where its energy-storage capability can help support load changes and reduce slower supply variation. It should normally complement rather than replace a small ceramic capacitor placed close to the audio amplifier or converter. The design must observe capacitor polarity and should account for output impedance, ESR, ripple current, and audible mechanical effects associated with poorly selected or overstressed electrolytic capacitors. Confirm the exact MWC capacitance and voltage rating against the rail requirements, and review case dimensions so the capacitor body does not interfere with nearby transformers, heat sinks, shielding, or control components. Use the manufacturer’s dimensional and rating documentation for the selected configuration.
Control-Board Bulk Filtering
MWC can support bulk filtering and local energy storage on a through-hole industrial control board when the board contains regulated DC rails that exceed the practical capacitance of discrete ceramic parts. The snap-in package simplifies assembly in designs that accept through-hole components, while the polarized aluminum electrolytic construction requires explicit positive and negative markings. Engineers should select the configuration by capacitance, voltage rating, ripple-current capability, temperature range, and lead spacing rather than by the MWC series name alone. Position the capacitor near the intended power entry or regulator and preserve adequate spacing around its body. Long-life applications should also consider electrolyte aging, leakage, and the environmental temperature at the board location.
LED Driver Rail Smoothing
MWC may be used on the DC input or smoothed output of an LED driver when the capacitor’s voltage and ripple ratings meet the driver’s electrical demands. Its bulk charge can reduce low-frequency disturbance on a regulated LED power rail, while a separate ceramic bypass capacitor can provide faster high-frequency response. The engineer must verify the exact capacitance, voltage margin, ESR, ripple-current rating, and lead spacing of the ordered MWC part. Thermal design is important because ripple current and proximity to the driver can increase capacitor temperature and shorten service life. Polarized construction also requires that the PCB marking and assembly instruction agree on terminal orientation. For outdoor lighting, assess the enclosure temperature range and any applicable vibration or humidity requirements before releasing the design.
Legacy Through-Hole Equipment Repair
MWC is applicable to repair and refurbishment of legacy equipment that uses snap-in aluminum electrolytic capacitors, provided the replacement configuration matches the original footprint and circuit requirements. A mechanical match alone is insufficient: capacitance, rated voltage, tolerance, ESR, ripple current, temperature grade, and service life should be compared with the removed component. The snap-in body and lead spacing must be checked against the existing PCB, including polarity and solder-joint accessibility. In equipment with intermittent resets, acoustic noise, bulging capacitors, or unstable supply rails, replacing only the visibly failed capacitor may not address the underlying cause. Inspect the surrounding rectifier, regulator, switching device, and polarity protection before commissioning the repaired assembly.
工程参考数据: MWC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Component Type | Snap-In Aluminum Electrolytic Capacitor |
| Brand | Meritek Electronics Corporation |
| Package | Snap-in through-hole package |
| Polarity | Polarized |
| Mounting Style | Through-hole snap-in |
设计说明
Confirm the ordered MWC case diameter, body height, lead spacing, and polarity against the PCB footprint before layout release. The MWC designation identifies a snap-in aluminum electrolytic family rather than one universal mechanical outline, so a generic drawing is not sufficient for production. Maintain the body clearance required for soldering and assembly, preserve access to the terminals, and ensure the capacitor cannot interfere with nearby transformers, relays, heat sinks, or enclosure panels.
Do not infer the MWC voltage rating from its name or from a distributor search result. Enter the required capacitance, voltage, tolerance, temperature grade, and case size as a complete ordering configuration. Verify positive and negative terminals against the circuit and PCB marking before power-up. Reversed polarization or an overvoltage condition can damage the capacitor and create a functional or safety risk in the associated power supply.
Evaluate ripple-current heating at the maximum expected load rather than selecting solely by capacitance and voltage. The MWC configuration’s permitted ripple current, ambient temperature, and distance from heat-generating components determine allowable stress. Estimated: power dissipation equals the capacitor’s RMS ripple-current loss at the operating frequency; compare the resulting temperature rise with the ordered component’s temperature limits using the manufacturer’s thermal information.
Use the MWC for bulk or lower-frequency filtering, and place a suitable ceramic bypass capacitor close to the switching device or load for high-frequency noise. Long PCB current paths reduce the benefit of bulk capacitance because inductance and resistance impede transient current. Keep the loop between the capacitor, regulator, and load short, and use separate return paths to reduce conducted and radiated emissions.
合规信息
The MWC document listing does not establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for the exact configuration.