NI

MWC - Snap-In Aluminum Electrolytic Capacitor | Meritek

MPN: MWC ✓ פעיל
כמות הזמנה מינימלית: 1 |

MWC סקירה

Meritek Electronics Corporation MWC is identified as a snap-in aluminum electrolytic capacitor. A snap-in aluminum electrolytic capacitor is a polarized passive component designed for bulk energy storage, filtering, and decoupling in DC power systems. Its aluminum electrolyte construction supports relatively high capacitance values while the snap-in lead format is intended for insertion into printed circuit boards or through-hole assemblies. The MWC entry is associated with a 292 KB, two-page datasheet.

Aluminum electrolytic capacitors belong to the broader capacitor hierarchy, which includes ceramic, film, tantalum, and supercapacitor technologies. Within that hierarchy, aluminum electrolytic capacitors are distinguished by their combination of polarity, capacitance capability, and practical cost. They are commonly used where a larger capacitance value is required than ceramic capacitors can reasonably provide. Because they are polarized, correct orientation is essential when placing them in a circuit.

The defining MWC feature is its snap-in aluminum electrolytic construction. The manufacturer identification and component description associate this designation with Meritek Electronics Corporation, while the documented format identifies the component as a snap-in capacitor rather than a surface-mount ceramic device or a chip resistor. Board layout must therefore account for the physical lead spacing, body diameter, polarity marking, and insertion clearance associated with the exact ordered configuration.

In operation, an aluminum electrolytic capacitor converts electrical energy into electrochemical energy at its dielectric interface. The device can smooth voltage variation, support regulated power rails, and reduce conducted noise when correctly polarized and paired with suitable companion components. Its practical effectiveness depends on capacitance, rated voltage, ESR, ripple-current capability, temperature, leakage, and lifetime, all of which must be confirmed against the ordering document for the selected MWC configuration.

Typical applications for this component class include power-supply input filtering, DC-DC converter output buffering, industrial control boards, audio equipment, display systems, and general-purpose electronics repair. The MWC can suit through-hole board designs when its dimensional and lead configuration match the PCB. It should not be selected for a location that requires a surface-mount footprint, and it should not be used where the circuit's ripple, temperature, lifetime, or vibration requirements exceed the component ratings.

Designers should verify the exact MWC series number, case size, capacitance, voltage rating, polarity, and temperature rating before layout release. Maintain the manufacturer's specified lead spacing and body clearance, observe the positive and negative markings, and avoid applying mechanical stress to the terminals. Where a switching converter creates high ripple current, supplement the capacitor with ceramic high-frequency bypass capacitors and review ripple-current and temperature rise at the actual operating load.

This product page distinguishes the confirmed MWC identity and snap-in aluminum electrolytic construction from the many unrelated MWC search results. It also organizes sourcing, technical comparison, design, and selection guidance around the component form and the checks required before placing a snap-in capacitor on a printed circuit board. Request a Quote for configuration-specific availability, lead time, and commercial support.

חלופות תחליף ישיר עבור MWC — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

MWC דירוגים מרביים ומאפיינים חשמליים

Component Type Snap-In Aluminum Electrolytic Capacitor
Manufacturer Meritek Electronics Corporation
Termination and Lead Style Snap-in
Polarity Aluminum electrolytic, polarized
סוג הרכבה Through-hole snap-in
Datasheet Length 2 pages
Datasheet File Size 292 KB

מדריך תצורת פינים של MWC standard

תצורת פינים עבור MWC (מארזת standard). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת standard עבור MWC

אין נתוני פריסת פינים מפורטים עבור MWC.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MWC מתאים עבור 6 יישוםs: Industrial Power-Supply Filtering, DC-DC Converter Output Buffering, Audio Power-Supply Decoupling, Control-Board Bulk Filtering, LED Driver Rail Smoothing, Legacy Through-Hole Equipment Repair.

🏭

Industrial Power-Supply Filtering

The Meritek Electronics Corporation MWC is suitable for a through-hole input-filter or DC-bus position in an industrial power supply when its ordered voltage, capacitance, ripple-current, and temperature ratings satisfy the design. A snap-in aluminum electrolytic capacitor can provide bulk energy storage and reduce low-frequency supply variation. Place it close to the power entry and regulator connections while observing polarity and the manufacturer’s clearance requirements. Because MWC denotes a series rather than one complete ordering code, the engineer must select the correct case size, capacitance, voltage rating, and lead spacing. The final design should also account for ripple-current heating, nearby heat sources, electrolyte aging, and the vibration conditions common in industrial equipment.

⚡

DC-DC Converter Output Buffering

MWC can be used on the output side of a DC-DC converter to support load transients and reduce low-frequency output ripple when its electrical ratings match the converter operating condition. The polarized aluminum electrolyte construction is appropriate for a grounded DC output rail, but the capacitor does not eliminate all switching ripple by itself. A ceramic capacitor placed directly at the load or converter output should generally provide complementary high-frequency bypass. Before layout release, verify the MWC capacitance, rated voltage, ESR, ripple-current capability, lead spacing, and orientation. Confirm also that ambient temperature and expected service life remain inside the ordered capacitor’s limits, especially where the converter operates near maximum load for extended periods.

🎧

Audio Power-Supply Decoupling

A snap-in aluminum electrolytic MWC can be used for bulk decoupling in an audio power rail, where its energy-storage capability can help support load changes and reduce slower supply variation. It should normally complement rather than replace a small ceramic capacitor placed close to the audio amplifier or converter. The design must observe capacitor polarity and should account for output impedance, ESR, ripple current, and audible mechanical effects associated with poorly selected or overstressed electrolytic capacitors. Confirm the exact MWC capacitance and voltage rating against the rail requirements, and review case dimensions so the capacitor body does not interfere with nearby transformers, heat sinks, shielding, or control components. Use the manufacturer’s dimensional and rating documentation for the selected configuration.

🔧

Control-Board Bulk Filtering

MWC can support bulk filtering and local energy storage on a through-hole industrial control board when the board contains regulated DC rails that exceed the practical capacitance of discrete ceramic parts. The snap-in package simplifies assembly in designs that accept through-hole components, while the polarized aluminum electrolytic construction requires explicit positive and negative markings. Engineers should select the configuration by capacitance, voltage rating, ripple-current capability, temperature range, and lead spacing rather than by the MWC series name alone. Position the capacitor near the intended power entry or regulator and preserve adequate spacing around its body. Long-life applications should also consider electrolyte aging, leakage, and the environmental temperature at the board location.

💡

LED Driver Rail Smoothing

MWC may be used on the DC input or smoothed output of an LED driver when the capacitor’s voltage and ripple ratings meet the driver’s electrical demands. Its bulk charge can reduce low-frequency disturbance on a regulated LED power rail, while a separate ceramic bypass capacitor can provide faster high-frequency response. The engineer must verify the exact capacitance, voltage margin, ESR, ripple-current rating, and lead spacing of the ordered MWC part. Thermal design is important because ripple current and proximity to the driver can increase capacitor temperature and shorten service life. Polarized construction also requires that the PCB marking and assembly instruction agree on terminal orientation. For outdoor lighting, assess the enclosure temperature range and any applicable vibration or humidity requirements before releasing the design.

🖥️

Legacy Through-Hole Equipment Repair

MWC is applicable to repair and refurbishment of legacy equipment that uses snap-in aluminum electrolytic capacitors, provided the replacement configuration matches the original footprint and circuit requirements. A mechanical match alone is insufficient: capacitance, rated voltage, tolerance, ESR, ripple current, temperature grade, and service life should be compared with the removed component. The snap-in body and lead spacing must be checked against the existing PCB, including polarity and solder-joint accessibility. In equipment with intermittent resets, acoustic noise, bulging capacitors, or unstable supply rails, replacing only the visibly failed capacitor may not address the underlying cause. Inspect the surrounding rectifier, regulator, switching device, and polarity protection before commissioning the repaired assembly.

What is the MWC electronic component?
MWC is identified as a snap-in aluminum electrolytic capacitor from Meritek Electronics Corporation. The documented component format is polarized and intended for through-hole insertion rather than surface-mount assembly. Its broad application class is energy storage and voltage filtering in DC power circuits. The exact capacitance, voltage rating, dimensions, and temperature limits depend on the specific MWC configuration and must be confirmed from its ordering documentation.
Where can I download the MWC datasheet PDF?
The MWC datasheet is available through the Alldatasheet search result linked on this page, where the document is listed as a 292 KB, two-page PDF. Use the manufacturer identification in the document to confirm that the selected page contains the intended MWC configuration. The link is a document index rather than a manufacturer-hosted PDF, so engineers should verify the component markings, case dimensions, electrical ratings, and revision status before releasing a design.
Where can I find the MWC pinout?
The MWC is a two-terminal polarized capacitor, so it does not use a numbered IC pinout. Its terminals are identified by polarity markings rather than pin numbers. Before insertion, verify the positive and negative terminals against the PCB silkscreen or footprint and confirm the lead spacing against the mechanical drawing. Incorrect polarity can damage the capacitor and may cause the associated power circuit to malfunction.
What are the key specifications of MWC that engineers should know?
The confirmed headline characteristics are the MWC designation, snap-in aluminum electrolytic construction, 292 KB datasheet size, and two-page documentation. Capacitance, rated voltage, ESR, ripple current, leakage current, temperature range, and case dimensions are configuration-specific and must be selected from the ordering documentation. Engineers should treat polarity and mechanical lead spacing as mandatory PCB constraints rather than relying on a generic MWC outline.
What applications are suitable for the MWC capacitor?
MWC is suitable for applications commonly served by snap-in aluminum electrolytic capacitors, including power-supply input filtering, DC rail energy buffering, industrial control equipment, and general through-hole electronic assemblies. Suitability depends on matching the ordered capacitance, voltage rating, ripple-current limit, and temperature range to the circuit. A ceramic bypass capacitor may also be needed beside the MWC for high-frequency noise control.
Can MWC be used in a switch-mode power supply?
MWC can be used in a switch-mode power supply when its ordered ratings satisfy the converter's output-capacitance, voltage, ripple-current, and temperature requirements. The capacitor may store energy and smooth low-frequency output ripple, while a ceramic capacitor should normally handle higher-frequency ripple near the switching device. Verify ESR and ripple-current behavior across the complete switching frequency because a generic snap-in outline does not establish those characteristics.
Is the MWC capacitor suitable for industrial control applications?
The snap-in MWC format is suitable for industrial control applications when the selected rating covers the ambient temperature, expected service life, vibration exposure, and electrical load. Industrial systems often impose stricter requirements than consumer equipment, including temperature cycling, surge conditions, and long operating intervals. Confirm those requirements against the MWC ordering document and avoid relying on a generic series-level description.
When should I choose MWC over another aluminum electrolytic capacitor?
Choose MWC when its exact configuration matches the required capacitance, voltage, case size, lead spacing, ripple-current capability, and temperature range. A different aluminum electrolytic capacitor is preferable if it provides a better ripple-current rating, longer rated life, lower leakage, smaller case, or a qualified temperature grade. The physical footprint and polarity markings remain decisive because an electrically similar capacitor may not fit the same PCB.
What is the best drop-in replacement for MWC?
A drop-in replacement must match the exact capacitance, voltage rating, case dimensions, lead spacing, polarity, and electrical-performance requirements; the MWC search results do not establish a qualified substitute. Request configuration details before approving a replacement. An engineer should compare the MWC ordering table with the candidate’s datasheet rather than assuming that another snap-in aluminum electrolytic capacitor is interchangeable.
Can another snap-in capacitor replace MWC?
A snap-in capacitor can replace MWC only after confirming that its ratings and mechanical dimensions are equivalent. At minimum, compare capacitance, rated voltage, tolerance, ESR, ripple current, leakage, operating-temperature range, body diameter, and lead spacing. A mechanically similar capacitor can still fail because its ripple-current or lifetime characteristics may be inadequate for the intended rail.
Where to buy MWC online?
Use the Request a Quote form on this page to request the exact MWC configuration and current commercial terms. A complete order must identify the required capacitance, rated voltage, case size, and lead configuration where applicable. This prevents a generic series designation from being mistaken for a specific component and allows stock, lead-time, and shipment details to be confirmed for the selected configuration.
What is the price of MWC?
Use the Request a Quote form on this page for the current price of the exact MWC configuration. Configuration-specific capacitance, voltage rating, case size, and packaging can affect commercial terms, so a price for an unspecified series entry is not sufficiently precise. The form can also confirm minimum order quantity, stock status, lead time, and delivery conditions before an order is released.
What is the lead time for MWC?
Current lead time depends on the specific MWC configuration, manufacturer stock, packaging, and order quantity. Use the Request a Quote form on this page and provide the complete ordering information, including capacitance, rated voltage, case size, and quantity. The supplier can then confirm current availability and an accurate lead time instead of estimating from a broad series-level search result.
Is MWC in stock?
Stock status depends on the exact MWC ordering configuration and is not established by the series-level document listing. Submit the required capacitance, voltage, case size, lead configuration, and quantity through the Request a Quote form on this page. The commercial response should confirm whether an exact match is in stock, how many pieces are available, and the expected delivery schedule.
How do I verify MWC polarity during PCB assembly?
Identify the MWC positive and negative terminals from the capacitor marking and match them to the PCB footprint and circuit net definitions before insertion. The aluminum electrolytic construction makes polarity mandatory, and reversing it can damage the component or create an unsafe power-circuit condition. Confirm orientation against the mechanical drawing and the applicable assembly drawing rather than relying only on the position of the PCB silkscreen.

נתוני עזר הנדסיים עבור MWC — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the Meritek Electronics Corporation MWC when the selected ordering configuration matches a through-hole PCB that uses a snap-in aluminum electrolytic capacitor and the required capacitance, voltage, ripple-current, temperature, and lifetime limits are satisfied. This format is especially useful in industrial control, power-supply, audio, and legacy equipment designs where through-hole assembly and bulk capacitance are priorities. Consider another aluminum electrolytic capacitor when it offers lower ESR, higher ripple-current capability, longer rated life, lower leakage, or a more appropriate temperature grade. Do not select a substitute solely by snap-in appearance: body dimensions, lead spacing, polarity, and electrical ratings must agree. A ceramic or film capacitor may be preferable where low leakage, low ESR, nonpolarized operation, or a compact surface-mount footprint is more important than bulk capacitance.

השוואה עם חלופות

פרמטר מוצר זה
Component Type Snap-In Aluminum Electrolytic Capacitor
Brand Meritek Electronics Corporation
Package Snap-in through-hole package
Polarity Polarized
Mounting Style Through-hole snap-in

הערות תכנון

Confirm the ordered MWC case diameter, body height, lead spacing, and polarity against the PCB footprint before layout release. The MWC designation identifies a snap-in aluminum electrolytic family rather than one universal mechanical outline, so a generic drawing is not sufficient for production. Maintain the body clearance required for soldering and assembly, preserve access to the terminals, and ensure the capacitor cannot interfere with nearby transformers, relays, heat sinks, or enclosure panels.

Do not infer the MWC voltage rating from its name or from a distributor search result. Enter the required capacitance, voltage, tolerance, temperature grade, and case size as a complete ordering configuration. Verify positive and negative terminals against the circuit and PCB marking before power-up. Reversed polarization or an overvoltage condition can damage the capacitor and create a functional or safety risk in the associated power supply.

Evaluate ripple-current heating at the maximum expected load rather than selecting solely by capacitance and voltage. The MWC configuration’s permitted ripple current, ambient temperature, and distance from heat-generating components determine allowable stress. Estimated: power dissipation equals the capacitor’s RMS ripple-current loss at the operating frequency; compare the resulting temperature rise with the ordered component’s temperature limits using the manufacturer’s thermal information.

Use the MWC for bulk or lower-frequency filtering, and place a suitable ceramic bypass capacitor close to the switching device or load for high-frequency noise. Long PCB current paths reduce the benefit of bulk capacitance because inductance and resistance impede transient current. Keep the loop between the capacitor, regulator, and load short, and use separate return paths to reduce conducted and radiated emissions.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The MWC document listing does not establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for the exact configuration.

הנתונים אומתו בתאריך: 2026-11-04 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

MWC datasheet MWC datasheet pdf MWC capacitor MWC Meritek MWC snap in capacitor MWC aluminum electrolytic capacitor MWC power supply filter MWC pin configuration MWC equivalent capacitor MWC drop in replacement MWC price MWC stock and lead time

רכיבים ומונחים קשורים

Meritek Electronics Corporation MWC snap-in capacitor aluminum electrolytic capacitor polarized capacitor passive component capacitor energy storage voltage filtering DC power supply through-hole technology surface-mount technology equivalent series resistance ripple current rated voltage capacitance bulk decoupling ceramic bypass capacitor switch-mode power supply industrial control audio power supply LED driver PCB footprint lead spacing
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר