Texas Instruments

OPA234PA - Low-Power Precision Dual Op Amp | Texas Instruments

料号: OPA234PA ✓ 量产中
Up to 36 V Vdss 250 µA per amplifier Id 8-pin PDIP Package
最小起订量: 1 |

OPA234PA 概述

The Texas Instruments OPA234PA is a low-power, precision dual operational amplifier supplied in an 8-pin PDIP package. It is designed for precision signal-conditioning applications that require two amplifiers in one package, with a stated supply range of 36 V single-supply operation or ±18 V dual-supply operation. The device also supports operation from +2.7 V, +5 V, and ±15 V rails, making it useful in systems that operate from low-voltage single supplies as well as conventional bipolar analog supplies. Each amplifier in the OPA234PA provides low quiescent current, specified at 250 µA per amplifier.

An operational amplifier is an active semiconductor device that uses high-gain differential amplification and negative feedback to create stable, accurate gain. The dual-amplifier configuration places two amplifiers in one package, allowing instrumentation, filtering, buffering, and signal-conditioning circuits to share a common package. The OPA234PA belongs to the low-power, precision single-supply operational-amplifier category and is intended to balance low current consumption with precision-oriented analog performance.

The main application advantages of the OPA234PA are its dual amplifier arrangement, wide supply-voltage capability, and low quiescent current. A dual amplifier can reduce the number of packages required in a circuit that needs two independent gain stages, while the low 250 µA per-amplifier quiescent current is relevant to battery-powered or otherwise power-constrained equipment. The device can also be used with either a single positive supply or split positive and negative supplies, depending on the signal and output-voltage requirements of the application.

OPA234PA is appropriate for precision measurement front ends, low-frequency active filters, sensor conditioning, audio and communications signal paths, and general-purpose analog processing. When using the device with a single supply, the input and output common-mode limits must be considered carefully. Decoupling capacitors should be placed close to the supply pins, and the unused amplifier section should be configured according to the manufacturer’s recommended practice to avoid instability or unintended oscillation.

This page combines the manufacturer and distributor product information for OPA234PA with application guidance, package details, specification gaps, and drop-in replacement analysis. Because the available material does not expose the complete manufacturer pin description table or detailed electrical limits, those values should be confirmed in the official OPA234 datasheet before final circuit release, qualification, or production use.

直接替换替代料: OPA234PA ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

OPA234PA 最大额定值与电气特性

Product Type Dual precision operational amplifier
Number of Amplifiers 2 amplifiers
Supply Voltage Range, Single Supply Up to 36 V
Supply Voltage Range, Dual Supply ±18 V
Guaranteed Performance Supplies +2.7 V, +5 V, and ±15 V
静态电流 250 µA per amplifier
封装 8-pin PDIP
引脚数量 8 pins
安装类型 Through-hole
分类 Operational amplifier
Application Class Precision analog signal conditioning
Supply Configuration Single-supply or dual-supply operation

OPA234PA 8-pin pdip 引脚配置指南

OPA234PA(8-pin pdip 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

OPA234PA 的 8-pin pdip 封装引脚图

暂无详细引脚数据: OPA234PA.

请参阅 数据手册 以查看完整引脚配置。

典型应用

OPA234PA 适用于 6 应用s: Portable Sensor Signal Conditioning, Precision Low-Frequency Active Filter, General-Purpose Instrumentation Amplifier, Low-Power Audio Preamplifier, Communications Interface Buffering, Precision Voltage Reference Buffer.

📱

Portable Sensor Signal Conditioning

OPA234PA is well suited to portable sensor-conditioning blocks because it combines two precision amplifiers with a 250 µA per-amplifier quiescent-current specification. The device can operate from +2.7 V, allowing the signal chain to run directly from a low-voltage source when the sensor output remains inside the input common-mode range. One section can amplify or filter the sensor signal while the second can provide level shifting, gain, or active filtering. Low quiescent current helps limit continuous battery drain, while the dual package reduces board area compared with two separate amplifiers.

🔧

Precision Low-Frequency Active Filter

OPA234PA can implement a two-amplifier active-filter section where low power and precision are more important than high-speed operation. Its dual-amplifier arrangement supports cascaded low-pass or notch stages using the same 8-pin PDIP package. The device is compatible with +2.7 V, +5 V, and ±15 V supply arrangements, enabling the same general topology to serve portable, laboratory, and industrial systems. Component tolerances, capacitor selection, and the amplifier’s gain-bandwidth behavior remain critical because those values determine filter accuracy and stability.

🏭

General-Purpose Instrumentation Amplifier

OPA234PA can support a classic three-op-amp instrumentation-amplifier topology when two amplifier sections are combined with a third external amplifier. Its low 250 µA per-amplifier quiescent current reduces the bias burden of the two internal sections, while the precision-oriented family is appropriate for slow measurement signals from strain gauges, temperature sensors, and resistive bridges. The circuit requires careful common-mode and output-range analysis. Input bias current, offset voltage, gain-bandwidth product, and noise are not available in the accessible excerpts and must be confirmed from the datasheet before selecting resistors and setting gain.

🎧

Low-Power Audio Preamplifier

OPA234PA can provide two low-power preamplifier channels in audio equipment requiring modest bandwidth rather than the specialized performance of a dedicated high-voltage audio amplifier. The dual configuration suits stereo line-level conditioning, buffering, or tone-control stages. Operation from +5 V is useful in compact audio products, and ±15 V operation supports higher-swing laboratory equipment. Designers should verify output swing, input bias current, slew rate, and noise against the audio bandwidth before selecting the device for high-fidelity applications.

🌐

Communications Interface Buffering

OPA234PA is applicable to low-speed communications interfaces that need buffering, gain, or impedance isolation. Its dual architecture allows one amplifier to condition a transmit-side signal and the other to buffer a receive-side or feedback path. The low quiescent current benefits battery-powered communications equipment, while operation from +2.7 V, +5 V, or ±15 V supports several system architectures. The amplifier should be used only where its input common-mode range, output swing, bandwidth, slew rate, and stability characteristics satisfy the signal amplitude and edge-rate requirements.

📺

Precision Voltage Reference Buffer

OPA234PA can buffer a low-current reference node when the source impedance is high or the load requires more drive than the reference can provide directly. Two amplifier sections may be used for reference buffering and auxiliary signal conditioning. The precision and low-power positioning of the OPA234 family fits measurement systems operating from +2.7 V, +5 V, or ±15 V. Before using it in a reference path, confirm input bias current, offset voltage, noise, output current capability, and stability from the manufacturer’s electrical-characteristics table because those specifications are not listed in the accessible product excerpts.

What is the OPA234PA?
The OPA234PA is a low-power, precision dual operational amplifier from Texas Instruments in an 8-pin PDIP package. According to the manufacturer information, it operates from a single supply up to 36 V or from dual supplies up to ±18 V, with guaranteed performance at +2.7 V, +5 V, and ±15 V. Its 250 µA per-amplifier quiescent current makes it relevant to low-power precision analog designs.
What are the key specifications of OPA234PA that engineers should know?
OPA234PA combines two precision operational amplifiers in one 8-pin PDIP package. Its documented headline specifications are single-supply operation to 36 V, dual-supply operation to ±18 V, guaranteed performance at +2.7 V, +5 V, and ±15 V, and quiescent current of 250 µA per amplifier. The manufacturer datasheet should be used for gain-bandwidth, offset-voltage, slew-rate, input-bias-current, and common-mode limits.
What is the supply voltage range of OPA234PA?
OPA234PA supports a single-supply voltage up to 36 V and a dual-supply voltage up to ±18 V. According to the Texas Instruments OPA234 documentation, guaranteed performance is also specified at +2.7 V, +5 V, and ±15 V. This makes the device usable in both low-voltage portable systems and conventional bipolar analog environments, subject to the detailed operating limits.
Does OPA234PA support single-supply operation?
Yes, OPA234PA supports single-supply operation up to 36 V as well as dual-supply operation up to ±18 V. The manufacturer identifies guaranteed performance at +2.7 V, +5 V, and ±15 V. In a single-supply circuit, the input common-mode and output-swing limits must be checked against the signal range, especially when signals approach ground.
Why is OPA234PA suitable for low-power applications?
OPA234PA is designed around a low quiescent-current specification of 250 µA per amplifier, with two amplifiers integrated in one package. That low bias consumption helps reduce supply demand in battery-powered instrumentation, portable measurement equipment, and low-duty-cycle analog systems. Low quiescent current does not by itself determine output drive capability, so load current and output-swing requirements should also be checked.
Where can I download the OPA234PA datasheet PDF?
The OPA234PA datasheet PDF is available through the linked manufacturer-document listing at https://www.alldatasheet.com/datasheet-pdf/pdf/848419/TI1/OPA234PA.html. The document is identified as a 23-page Texas Instruments datasheet for the low-power, precision, single-supply operational amplifiers. Use the pin-description table, electrical-characteristics table, and application sections when assigning PCB functions.
Where can I find the OPA234PA pinout?
The OPA234PA pinout should be taken from the pin-description table in the Texas Instruments OPA234 datasheet. The verified package information identifies an 8-pin PDIP, but the individual pin names and numbering are not present in the accessible product excerpts. Before routing a PCB or assembling a prototype, use the official datasheet diagram to confirm output, input, supply, and offset-null connections.
What applications are suitable for OPA234PA?
OPA234PA fits precision signal-conditioning, low-frequency active-filter, sensor-conditioning, measurement, audio, and communications applications. Its dual-amplifier configuration can implement two gain stages or one signal stage plus an instrumentation amplifier section in a single package. Operation from +2.7 V and low quiescent current are especially useful in portable equipment, while ±15 V operation supports conventional laboratory and industrial analog circuits.
What is the best drop-in replacement for OPA234PA?
The best drop-in replacement must use the same 8-pin PDIP footprint and preserve the OPA234PA’s electrical pin functions. The available cross-reference results do not identify a complete set of qualified 8-pin PDIP replacements, so no alternative is presented as a guaranteed substitute without further datasheet verification. Use the Request a Quote form on this page for sourcing assistance and confirm the replacement’s pinout, supply range, offset voltage, bandwidth, and stability before substitution.
What can replace OPA234PA?
OPA234PA can be replaced only after verifying both package and circuit compatibility. A valid candidate should be an 8-pin PDIP dual precision op amp with compatible power-supply requirements, input and output common-mode limits, offset voltage, gain-bandwidth product, slew rate, and stability behavior. The available cross-reference material identifies the OPA234 family but does not establish enough verified PDIP candidates, so it does not support a definitive drop-in recommendation.
Is OPA234PA the same as OPA234UA?
No, OPA234PA and OPA234UA should not be treated as the same drop-in part. OPA234PA is listed in an 8-pin PDIP package, whereas OPA234UA is identified in the comparison result as an 8-pin SOIC. Although both may belong to the OPA234 family and have similar functional characteristics, the through-hole versus surface-mount package requires a different PCB footprint.
When should I choose OPA234PA over another dual op amp?
Choose OPA234PA when the design needs two precision amplifiers in one 8-pin PDIP package and benefits from its 250 µA per-amplifier quiescent current. It is particularly suitable for low-voltage single-supply operation at +2.7 V or +5 V and for circuits needing ±15 V performance. Select another candidate only when its bandwidth, offset, noise, output swing, supply behavior, and package have all been verified against the design requirements.
Is OPA234PA suitable for battery-powered instrumentation?
OPA234PA is suitable for many battery-powered instrumentation circuits because it is specified at 250 µA quiescent current per amplifier and supports operation from +2.7 V. A dual package can also reduce board-area requirements by providing two amplifier sections. The complete power budget must include sensor excitation, reference circuitry, load current, regulator losses, and any output-stage bias current.
OPA234PA vs OPA2134PA: which is better for a precision application?
OPA234PA is the better match when low power, +2.7 V operation, and an 8-pin PDIP dual-amplifier package are priorities. OPA2134PA is identified as a SoundPlus audio operational amplifier and therefore belongs to a different optimization target. The correct choice depends on the required noise, distortion, bandwidth, offset, and supply range rather than package alone, so the two datasheets should be compared against the actual signal chain.
How do I choose a replacement for OPA234PA?
Choose a replacement by matching the 8-pin PDIP footprint, pin functions, supply-voltage range, common-mode input range, output swing, offset voltage, gain-bandwidth product, slew rate, input bias current, noise, and stability behavior. A same-package designation is only the first requirement. The available family cross-reference identifies potential alternatives but does not provide a fully verified set of PDIP drop-ins, so each candidate must be checked against the OPA234 datasheet.
Where can I buy OPA234PA online?
Use the Request a Quote form on this page to request OPA234PA availability, current pricing, and lead time from XAIPART. The form allows buyers to specify quantity and packaging requirements without relying on a static quotation that may become outdated. The OPA234PA is identified as an 8-pin PDIP operational amplifier, and the manufacturer documentation supports single-supply operation to 36 V.
What is the price of OPA234PA?
The current OPA234PA price should be requested through the Request a Quote form on this page. Pricing depends on order quantity, package form, and current component-market conditions, and a static figure can become inaccurate quickly. Submit the required quantity and intended package arrangement with the request so a current quotation can be prepared.
What is the lead time for OPA234PA?
Request the current OPA234PA lead time through the Request a Quote form on this page. Lead time can vary with order quantity, procurement status, and packaging configuration, so it should not be inferred from a historical listing. Provide the required quantity and any date constraint when submitting the request.
Is OPA234PA in stock?
Current OPA234PA stock status should be confirmed through the Request a Quote form on this page. Because inventory changes quickly and the OPA234PA is also offered through multiple channels, use the form for an allocation response tied to the requested quantity. The confirmed package for this MPN is the 8-pin PDIP, which should be stated in the request.

工程参考数据: OPA234PA ——对比、设计指导和合规信息。

选型指南

OPA234PA is most appropriate when a design requires two precision operational amplifiers in one 8-pin PDIP package and prioritizes low 250 µA per-amplifier quiescent current. Its support for +2.7 V, +5 V, and ±15 V operation makes it useful across portable, laboratory, and industrial analog systems. Select a surface-mount OPA234-family option only when the PCB can be redesigned and its electrical ratings remain acceptable. For high-speed or specialized audio applications, compare the complete datasheet parameters rather than assuming that a same-family designation guarantees equivalent performance. Before approving a replacement, verify the package, pinout, common-mode range, output swing, offset voltage, gain-bandwidth product, slew rate, noise, bias current, and stability. The verified excerpts do not establish five genuine 8-pin PDIP drop-in alternatives, so preserving the original package and validating each circuit requirement is more important than forcing an unsupported substitution.

设计说明

Place the supply-decoupling network close to the OPA234PA pins and use short, low-inductance connections between the capacitor and the device. Account for the documented 250 µA quiescent current per amplifier when sizing the supply budget, and include additional current for the output load and any bias paths. In single-supply designs, verify that signal excursions remain within the amplifier’s input common-mode and output-swing limits.

Do not treat every OPA234-family device as a drop-in substitute for OPA234PA. The PA suffix is associated with an 8-pin PDIP package, whereas other listed family options may use surface-mount packages. Confirm pin numbering and functions, input and output common-mode ranges, gain-bandwidth product, slew rate, offset voltage, and stability before replacing a part or revising a PCB.

Route the two amplifier channels to minimize coupling between high-impedance inputs, supply returns, and sensitive output nodes. Keep feedback components close to their associated amplifier pins, maintain a compact ground return, and avoid routing input traces beneath noisy supply or digital paths. When using one channel, configure the unused amplifier in the stable manner specified by the manufacturer rather than leaving its inputs floating.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No explicit compliance declarations were identified for OPA234PA in the accessible manufacturer or distributor excerpts.

数据核验日期: 2026-11-09 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

OPA234PA datasheet OPA234PA datasheet pdf OPA234PA pinout OPA234PA specifications OPA234PA 8-pin PDIP Texas Instruments OPA234PA OPA234PA equivalent OPA234PA replacement OPA234PA cross reference OPA234PA vs OPA234UA OPA234PA vs OPA2134PA OPA234PA price OPA234PA stock OPA234PA application circuit

相关元器件 & 术语

Texas Instruments OPA234PA OPA234 OPA2134PA OPA234UA dual operational amplifier precision op amp low-power op amp single-supply operational amplifier signal conditioning active filter instrumentation amplifier audio preamplifier voltage reference buffer 250 µA per-amplifier quiescent current 36 V single-supply operation ±18 V dual-supply operation +2.7 V operation +5 V operation ±15 V operation 8-pin PDIP PDIP package through-hole mounting semiconductor
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情