Texas Instruments

OPA2682N - Dual Wideband Buffer Amplifier | Texas Instruments

料号: OPA2682N ✓ 量产中
14-pin SOIC Package
最小起订量: 1 |

OPA2682N 概述

The Texas Instruments OPA2682N is a dual-circuit, fixed-gain wideband buffer amplifier packaged in a 14-pin SOIC. It belongs to the amplifier IC family and is intended for applications requiring buffered high-bandwidth signals without relying on a general-purpose operational-amplifier topology. Its two amplifier circuits provide separate channels for simultaneous signal buffering, while the 14-pin SOIC package supports conventional surface-mount PCB assembly.

A buffer amplifier is an analog amplifier stage that provides high input impedance and low output impedance. This impedance separation allows a source to drive a downstream circuit without significantly changing the source operating condition. The OPA2682N is identified as a wideband buffer amplifier with a fixed gain of 2, making it suitable for signal-chain stages, impedance conversion, cable-driver interfaces, instrumentation, and test-and-measurement systems where preserving signal amplitude and bandwidth is important.

The defining product characteristics include two amplifier circuits in one package and a 14-SOIC footprint. Because both channels are integrated into one device, the OPA2682N can implement dual-channel buffering with fewer external components and a smaller total board footprint than two separate single-channel buffer packages. A fixed gain of 2 also allows the stage to provide predictable signal-level gain while preserving the wideband operating intent of the device family.

The OPA2682N can be used in balanced or unbalanced analog signal paths, including instrumentation front ends, communications interfaces, data-conversion support circuits, and laboratory or industrial signal-conditioning equipment. Its dual-channel arrangement is particularly useful when two related signals must be buffered with matched device characteristics, such as differential signal chains, complementary outputs, or synchronous acquisition channels.

PCB implementation should follow the manufacturer pinout and land pattern for the 14-SOIC package. Keep input and output routing short, provide a stable low-impedance reference connection, and observe the decoupling and stability recommendations in the manufacturer datasheet. Because the available product listing identifies the device as a two-circuit 14-SOIC buffer amplifier but does not publish a complete electrical characterization, verify voltage, current, bandwidth, noise, slew rate, and thermal limits against the current manufacturer datasheet before release to production.

This product page combines the verified package and device classification with practical selection guidance, pinout-design considerations, lifecycle-oriented sourcing guidance, and a conservative comparison framework. It is intended to help engineers establish whether the OPA2682N fits the required channel count, package, gain, and analog signal-chain architecture before completing detailed circuit design.

直接替换替代料: OPA2682N ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

OPA2682N 最大额定值与电气特性

Device Type Dual fixed-gain wideband buffer amplifier
Number of Amplifier Circuits 2 circuits
Number of Channels 2 channels
Gain 2 V/V
封装 14-pin SOIC
Terminal Count 14 terminals
安装类型 Surface mount

OPA2682N 14-pin soic 引脚配置指南

OPA2682N(14-pin soic 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

OPA2682N 的 14-pin soic 封装引脚图

暂无详细引脚数据: OPA2682N.

请参阅 数据手册 以查看完整引脚配置。

典型应用

OPA2682N 适用于 6 应用s: Dual-Channel Instrumentation Buffering, Communication Signal-Chain Conditioning, Data-Acquisition Front Ends, Audio and Low-Frequency Signal Paths, Test and Measurement Buffering, Industrial Control and Sensor Interfaces.

🔧

Dual-Channel Instrumentation Buffering

The OPA2682N fits instrumentation designs requiring two buffered analog channels in one 14-pin SOIC package. Its two-circuit configuration is useful when a front end must isolate measurement sources from the impedance and capacitance of subsequent amplifier, ADC, or instrumentation modules. The fixed gain of 2 provides a defined signal-level increase while the buffer stage reduces loading sensitivity. Designers should verify input bias current, output-current capability, bandwidth versus load capacitance, and stability requirements against the manufacturer datasheet before committing the circuit.

🌐

Communication Signal-Chain Conditioning

OPA2682N can serve as a dual wideband buffer in communication equipment where transmit, receive, or auxiliary paths require impedance isolation. Combining two fixed-gain buffer circuits in a 14-pin SOIC reduces component count compared with two separate single-channel packages. The gain of 2 can restore signal level after passive losses, while the wideband classification supports higher-frequency analog paths. Validate channel bandwidth, output swing, capacitive-load stability, supply voltage, and maximum output current against the exact operating conditions before deployment.

📺

Data-Acquisition Front Ends

The dual-channel OPA2682N is appropriate for front-end stages that feed sampling systems, particularly when two sensors or conditioned outputs must be buffered with matched device characteristics. High input impedance can limit source loading, while low output impedance helps drive the next analog stage. The fixed gain of 2 also provides a convenient level adjustment before conversion. Confirm input common-mode range, output swing, noise performance, settling behavior, and ADC interface requirements using the manufacturer datasheet and a circuit-level simulation.

🎧

Audio and Low-Frequency Signal Paths

OPA2682N can buffer two related low-frequency or wideband audio signals when the circuit requires stable impedance separation and a gain of 2. One channel may process a signal while the other handles a companion or complementary path, allowing the same device to provide consistent buffer behavior. Designers must confirm the device’s actual bandwidth, slew rate, output swing, noise, and load-drive capability in the manufacturer documentation. Use short, carefully routed traces and return the output to ground cleanly through the buffer’s own output impedance.

🖥️

Test and Measurement Buffering

The OPA2682N is suitable for buffering sources in test and measurement equipment where the instrument must limit loading of the device under test. Two amplifier circuits allow a fixture or adapter to buffer two channels while keeping the assembly compact in a 14-pin SOIC package. The fixed gain of 2 can compensate for moderate path attenuation, but accuracy depends on the complete signal chain. Evaluate input capacitance, output drive, frequency response, and calibration requirements before selecting this device for precision measurement paths.

🏭

Industrial Control and Sensor Interfaces

OPA2682N can support industrial sensor interfaces that need buffered drive between a sensing element and downstream processing electronics. Its dual-circuit construction allows related sensor or control signals to share one package, while the buffer operation separates source and load impedances. Use it when the required bandwidth, common-mode range, and output drive are acceptable and when a gain of 2 matches the signal architecture. Industrial designs must also review temperature range, supply tolerances, transient protection, and isolation requirements before incorporating the amplifier.

What is the OPA2682N?
The OPA2682N is a Texas Instruments dual-circuit, fixed-gain wideband buffer amplifier in a 14-pin SOIC package. According to the manufacturer product classification, it provides two amplifier circuits with a gain of 2 and is intended for high-bandwidth analog buffering. Its primary roles are impedance isolation, signal-level conditioning, and driving subsequent circuit stages without allowing the load to significantly alter the source signal.
What are the key specifications of OPA2682N that engineers should know?
The OPA2682N is a two-circuit wideband buffer amplifier with a gain of 2 in a 14-pin SOIC package. The manufacturer listing identifies it as a buffer amplifier rather than a general-purpose op amp, which is important when selecting the correct input and output behavior for an instrumentation or communication signal chain. Confirm operating supply, bandwidth, output-current capability, noise, slew rate, and temperature limits in the manufacturer datasheet before final circuit sign-off.
How many amplifier circuits does the OPA2682N contain?
The OPA2682N contains two amplifier circuits. According to the DigiKey product classification, it is a “Buffer Amplifier 2 Circuit” device in a 14-SOIC package. The dual-channel arrangement allows two buffered outputs to be implemented with one package, which can simplify dual-path analog systems and reduce board area compared with two separate single-buffer devices.
What is the gain of the OPA2682N?
The OPA2682N has a fixed gain of 2 V/V. This means an ideal small-signal input of 1 V produces a 2 V output before accounting for the actual frequency-dependent behavior and output limits. The gain stage is useful in wideband signal paths where predictable voltage amplification is required while the buffer function isolates the source from the connected load.
What package does the OPA2682N use?
The OPA2682N is offered in a 14-pin SOIC surface-mount package. The 14-SOIC designation is confirmed by the DigiKey listing and the Rochester Electronics cross-reference result for OPA2682N/2K5. Use the manufacturer land pattern and pin-description table when assigning signals, because the buffer amplifier’s supply, ground, input, output, and any control or compensation connections must follow the exact device documentation.
Where can I download the OPA2682N datasheet PDF?
The official Texas Instruments datasheet is available through the manufacturer link on this page, with an additional manufacturer-linked datasheet index at datasheet4u.com. The manufacturer PDF is the preferred document for pin assignments, electrical characteristics, recommended operating conditions, application examples, and package drawings. Compare the document revision against the latest Texas Instruments product page before using it for a production release.
Where can I find the OPA2682N pinout?
The OPA2682N pinout should be taken from the pin-description table in the Texas Instruments manufacturer datasheet. The verified product listing confirms a 14-pin SOIC package but does not reproduce individual terminal names or numbering. Assign PCB nets only after checking the package drawing and pin table, especially the two amplifier channels and their power-supply and ground terminals.
Where to buy OPA2682N online?
Use the Request a Quote form on this page to request OPA2682N availability, lot traceability, and current channel pricing. The product appears in multiple manufacturer and distributor catalogs under Texas Instruments or its historical Burr-Brown identity, but availability and lifecycle status can change. Providing the required quantity, package suffix, and date-code constraints in the request helps procurement confirm an exact and traceable supply.
What is the price of OPA2682N?
Current OPA2682N pricing is obtained through the Request a Quote form on this page. The available listing references a starting amount, but it does not provide an exact quantity-break table for the complete OPA2682N ordering code, so no fixed tier is represented in the structured pricing data. Request a quote for the precise quantity and required traceability rather than relying on a generic starting amount.
What is the lead time for OPA2682N?
The current OPA2682N lead time should be requested through the Request a Quote form on this page. Lead time can vary with manufacturer inventory, authorized-channel stock, date-code requirements, and production volume. Include your required quantity, acceptable date-code policy, target delivery date, and whether both channels must come from the same lot when requesting supply confirmation.
Is OPA2682N in stock?
OPA2682N is shown in current product listings, including an in-stock listing, but inventory changes continuously. Use the Request a Quote form on this page for a quantity-specific availability confirmation rather than relying on a search-result status. State the required package suffix and any date-code restriction, and request confirmation that both amplifier channels are sourced from the same lot when channel matching is important.
What can replace OPA2682N?
A valid OPA2682N replacement must provide two fixed-gain wideband buffer channels, a gain of 2, a 14-pin SOIC footprint, and pin-to-pin-compatible connections. The verified cross-reference results do not identify a distinct drop-in replacement, while OPA2682N/2K5 is a package or ordering-code variant rather than a distinct engineering alternative. Request a manufacturer-supported quote for the original device, or submit the required signal, supply, bandwidth, load, and stability criteria for a formal engineering review.
Is OPA2682N suitable for dual-channel signal buffering?
Yes, OPA2682N is suitable for dual-channel signal buffering when the application matches its two-circuit architecture, gain of 2, and 14-SOIC package. It is especially appropriate when two related signals require buffered drive into a higher-impedance or capacitive downstream stage. Validate source impedance, load capacitance, output-current demand, supply range, and stability in the manufacturer datasheet before deployment.
When should I choose OPA2682N over a single-channel buffer?
Choose OPA2682N when the design requires two buffered channels and can use a 14-pin SOIC layout. Integrating both channels into one package can reduce component count and board footprint while ensuring both amplifiers come from one device. Select a single-channel buffer instead when only one signal path is needed, when the board requires a smaller package, or when the required channel count does not justify a dual package.
OPA2682N vs OPA2682N/2K5 - which is the better choice?
OPA2682N and OPA2682N/2K5 identify variants of the same dual wideband buffer amplifier family and both use a 14-terminal SOP-style package. The distinction is the ordering suffix, which can denote different commercial packaging or reel configuration. Choose the exact suffix approved by your quality, traceability, and assembly requirements, and compare the manufacturer’s orderable-addendum details before treating the parts as interchangeable.
What is the best Texas Instruments equivalent for OPA2682N?
The best exact Texas Instruments equivalent for OPA2682N is the OPA2682 device with the ordering suffix required for your assembly and procurement process. The OPA2682N/2K5 listing confirms the same dual-buffer, 14-terminal device family in a commercial package variant. Because no separate cross-brand or distinct same-family drop-in part is established, retain the original function, gain, footprint, and lifecycle requirements when requesting a quote.

工程参考数据: OPA2682N ——对比、设计指导和合规信息。

选型指南

Choose OPA2682N when the design needs two buffered channels, a fixed gain of 2, and a 14-pin SOIC footprint. It is a practical choice for dual-channel instrumentation, communication signal conditioning, acquisition front ends, and test equipment where reducing package count is useful. Verify bandwidth, output-current capability, supply range, input common-mode range, noise, slew rate, and capacitive-load stability against the manufacturer datasheet before committing the design. OPA2682N/2K5 is the closest identified ordering variant, but it should be treated as a commercial package choice rather than a functionally distinct replacement. No distinct drop-in alternative is established because the verified cross-reference results contain only generic search tools and the OPA2682N/2K5 ordering variant. For a different amplifier to qualify, it must match the 14-pin SOIC footprint, pin connections, two-channel architecture, gain, electrical limits, and intended load conditions. If those conditions cannot be confirmed, retaining the original OPA2682N ordering code is the lowest-risk sourcing decision.

与替代料对比

参数 本产品
Brand Texas Instruments
Package 14-pin SOIC
Device Type Wideband buffer amplifier
Amplifier Circuits 2 circuits
Channels 2 channels
Gain 2 V/V
Mounting Type Surface mount

关键差异点

  • Two integrated buffer channels in one package (对比 OPA2682N/2K5)
  • Wideband fixed-gain buffer function (对比 General-purpose single-channel operational amplifier)
  • Compact dual-channel implementation (对比 Two separate single-channel buffer packages)

设计说明

Assign the OPA2682N nets from the manufacturer pin-description table and use the land pattern specified for the 14-pin SOIC. Keep each input route short and connect the bypass capacitor directly between the relevant supply and ground pins. Maintain a low-impedance ground return beneath and around the device, and avoid routing high-current or fast-switching paths beneath the analog inputs to reduce ground bounce and unwanted coupling.

Do not treat a 14-pin SOIC footprint alone as proof that another buffer amplifier is interchangeable. A replacement must match the two-channel architecture, gain of 2, supply limits, bandwidth, output-drive capability, stability with the intended load, and every signal connection. Review the complete ordering suffix as well, since OPA2682N/2K5 is a commercial variant of the same device family and may have different packing or order-processing details.

Validate capacitive loading at each buffered output and preserve the manufacturer’s recommended operating and compensation conditions. Long PCB traces, probe capacitance, and long cable connections can change the effective load seen by the output stage and may affect frequency response or stability. If the output must drive a cable or large capacitive node, perform an end-to-end step-response test and evaluate series isolation resistance before production release.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No specific compliance declaration was identified in the product listings. Review the current Texas Instruments product page, material declaration, and quality documentation for the selected ordering suffix before procurement.

数据核验日期: 2026-11-09 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

OPA2682N datasheet OPA2682N datasheet pdf OPA2682N pinout OPA2682N specifications OPA2682N price OPA2682N stock OPA2682N equivalent OPA2682N replacement OPA2682N cross reference OPA2682N vs OPA2682N/2K5 Texas Instruments OPA2682N OPA2682N 14-SOIC OPA2682N dual buffer amplifier OPA2682N fixed gain 2 OPA2682N application circuit

相关元器件 & 术语

Texas Instruments Burr-Brown OPA2682N OPA2682 OPA2682N/2K5 dual buffer amplifier wideband buffer amplifier fixed-gain amplifier amplifier IC analog signal chain impedance buffer high input impedance low output impedance gain of 2 14-pin SOIC SOIC package surface-mount package instrumentation data acquisition communications test and measurement semiconductor
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情