Texas Instruments

OPA341UA - 5.5MHz RRIO Op Amp with Shutdown | Texas Instruments

料号: OPA341UA ✓ 量产中
5.5 V Vdss 8-pin SOIC Package
最小起订量: 1 |

OPA341UA 概述

The Texas Instruments OPA341UA is a single, rail-to-rail input and output operational amplifier with a 5.5 MHz gain-bandwidth product, a 5.5 V maximum supply voltage, and shutdown support, housed in an 8-pin SOIC package. Its rail-to-rail operation makes it suitable for low-voltage analog systems in which input or output signals can approach the supply rails. The shutdown function provides a controlled method to reduce power consumption in portable and battery-powered equipment.

An operational amplifier, or op amp, is the active element in a feedback-control or signal-conditioning circuit that amplifies the voltage difference between its two inputs. The op-amp category belongs to the broader amplifier-IC and analog-signal-processing hierarchy. Rail-to-rail input and output operation extends the usable signal range beyond the traditional limits imposed by internal input and output saturation stages.

The OPA341UA combines a 5.5 MHz gain-bandwidth product with rail-to-rail input and output capability. A shutdown control allows the circuit designer to place the amplifier into a low-power state when signal processing is not required. Its single-amplifier configuration and SOIC-8 package also make it convenient for compact analog boards requiring a general-purpose precision amplifier rather than a multi-channel device.

The 5.5 MHz gain-bandwidth product is particularly useful for moderate-bandwidth signal conditioning, sensor interfaces, active filters, and low-level audio paths. Rail-to-rail inputs improve signal capture when operating from a 5 V rail, while rail-to-rail outputs help preserve dynamic range. The shutdown function adds system-level control that can be useful in portable instruments, sampling systems, and applications that alternate between active measurement and low-power states.

Typical applications include current-to-voltage conversion following a DAC, audio signal conditioning, portable measurement equipment, battery-powered sensing, and general-purpose analog filtering. In these systems, the amplifier can operate from a low-voltage supply while accepting input signals near either supply rail and providing output swing close to the available supply range.

The shutdown behavior, input/output common-mode limits, output-load capability, and stability conditions must be checked against the manufacturer datasheet for the intended supply voltage and signal frequency. Decoupling capacitors should be placed close to the supply pins, and the feedback network should preserve the required noise gain and phase margin at the selected operating frequency.

This product page combines the manufacturer's device information with package details, application guidance, compatibility analysis, and practical design considerations. It helps engineers identify whether the OPA341UA matches a low-voltage, rail-to-rail signal-chain requirement before completing a production design.

直接替换替代料: OPA341UA ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: OPA341UA (相同外形与封装尺寸) ——差异在于 Package.

Texas Instruments
Package: 8-SOIC
对比 OPA341UA →

OPA341UA/2K5

✅ 直接替换
📦 8-SOIC
Electrical performance and pinout are identical; only the 2500-piece reel order code differs

📋 参考替代料(不在目录中)

OPA340UA

✅ 直接替换
Texas Instruments
📦 8-SOIC
Single operational amplifier · Rail-to-rail CMOS operational amplifier · 1 · Single supply · Rail-to-rail · Rail-to-rail within 1 mV · 5.5 MHz · 6 V/us

联系询价

查看数据手册 →

OPA337UA

✅ 直接替换
📦 8-SOIC
Rail-to-rail SOIC-8 family member with nominally identical performance profile, but shutdown behavior and pin use require verification

📋 参考替代料(不在目录中)

OPA341UA 最大额定值与电气特性

Amplifier Type Single operational amplifier
Number of Circuits 1 circuit
Maximum Supply Voltage 5.5 V
Gain-Bandwidth Product 5.5 MHz
Input Common-Mode Range Rail-to-rail input
输出类型 Rail-to-rail output
Shutdown Support Yes
Amplifier Class Standard general-purpose amplifier
封装 8-pin SOIC
安装类型 Surface mount
工作温度范围 Extended temperature range; limits not stated in the product-page summary
RoHS 状态 unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

OPA341UA 引脚配置

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
引脚 1 OUT — Amplifier output
引脚 2 IN- — Inverting input
引脚 3 IN+ — Non-inverting input
引脚 4 V- — Negative supply connection
引脚 5 SHUTDOWN — Active shutdown control
引脚 6 V+ — Positive supply connection
引脚 7 NC — Not connected
引脚 8 NC — Not connected

典型应用

OPA341UA 适用于 6 应用s: Portable Sensor Signal Conditioning, Battery-Powered Measurement Equipment, Audio Preamplifier Stage, DAC Current-to-Voltage Conversion, Active Analog Filter, Industrial Control Signal Interface.

🧩

Portable Sensor Signal Conditioning

The OPA341UA fits low-voltage sensor-conditioning stages that require rail-to-rail input acceptance and controlled shutdown. Its rail-to-rail input characteristic allows the amplifier to operate close to the limits of a 5 V-class supply, while the 5.5 MHz gain-bandwidth product provides useful bandwidth for moderate-speed sensor signals. Place the device in an active filter or non-inverting gain stage, and drive its shutdown control when the sensor is sampled infrequently to reduce system power. The design must preserve stable feedback and confirm the required common-mode and output headroom for the selected supply voltage.

🔧

Battery-Powered Measurement Equipment

OPA341UA is appropriate for battery-powered instruments that periodically enable an analog measurement chain. The shutdown function supports low-power operation, while the single amplifier and 8-pin SOIC package simplify board allocation compared with a multi-channel device. Its 5.5 MHz gain-bandwidth product is suitable for signal-conditioning stages beyond static sensor readings, including filtered measurements and small-signal amplification. Tie the shutdown control to the instrument's power-management logic and check the manufacturer datasheet for logic levels, start-up behavior, supply limits, and output settling before defining the measurement interval.

🎧

Audio Preamplifier Stage

The OPA341UA can be used in a low-voltage audio preamplifier when its rail-to-rail input and output operation match the signal range. The 5.5 MHz gain-bandwidth product supports audio-band amplification with additional headroom above the baseband region, and the amplifier can be disabled through shutdown when the audio path is inactive. Use conventional non-inverting or inverting feedback according to the required gain and bandwidth, and observe the output-swing and load limitations at the chosen supply voltage. The manufacturer datasheet should also be reviewed for noise, distortion, and stability at the selected closed-loop gain.

📺

DAC Current-to-Voltage Conversion

The OPA341UA is specifically suited to current-to-voltage conversion at the output of a DAC. Rail-to-rail input behavior helps accommodate the voltage generated by the feedback resistor when the DAC output approaches a supply rail, and the 5.5 MHz gain-bandwidth product allows the transimpedance stage to operate beyond slow-resolution audio rates. Configure the feedback resistor and optional compensation capacitor from the manufacturer datasheet, then verify settling against the DAC output step and required accuracy. The shutdown input provides a way to isolate the output when the converter is not being used.

📡

Active Analog Filter

OPA341UA can implement low-voltage active filters where rail-to-rail signal handling and a 5.5 MHz gain-bandwidth product are useful. The device is appropriate for first or second-order sections in a filter chain, particularly when signals span much of the low-voltage supply range. Select resistor and capacitor values for the intended pole or center frequency, then confirm loop gain and phase margin from the manufacturer datasheet at the selected noise gain. The shutdown function may be useful in switched-filter systems, but it should be sequenced so that the analog output does not produce an unwanted transient during state changes.

🏭

Industrial Control Signal Interface

OPA341UA is suitable for general-purpose industrial control interfaces operating from low-voltage supplies. Rail-to-rail inputs help process control signals near the supply range, and the 5.5 MHz bandwidth supports faster diagnostics and conditioning than a strictly low-frequency amplifier. The amplifier can condition sensor outputs, error-amplifier signals, or buffered control references. Provide local supply bypassing, maintain an appropriate feedback network, and verify input protection because rail-to-rail operation alone does not make the device tolerant of external overvoltage. Use the shutdown function when the controlled subsystem can be placed in a defined inactive state.

推荐产品汇总

OPA340UA Texas Instruments 用于: Portable Sensor Signal Conditioning, Battery-Powered Measurement Equipment, Audio Preamplifier Stage, DAC Current-to-Voltage Conversion, Active Analog Filter OPA337UA Related rail-to-rail SOIC-8 amplifier 用于: Portable Sensor Signal Conditioning, Active Analog Filter OPA341UA/2K5 Same electrical device in a 2500-piece reel order code 用于: Battery-Powered Measurement Equipment, Industrial Control Signal Interface OPA2341UA Dual member of the manufacturer OPA341 family 用于: Audio Preamplifier Stage, DAC Current-to-Voltage Conversion, Industrial Control Signal Interface
What are the key specifications of OPA341UA that engineers should know?
The OPA341UA is a single operational amplifier featuring rail-to-rail input and output operation, a 5.5 MHz gain-bandwidth product, and a maximum supply voltage of 5.5 V. It also includes an active shutdown function and is offered in an 8-pin SOIC package. According to the Texas Instruments OPA341 product page and manufacturer datasheet, these characteristics position the device for low-voltage, general-purpose signal conditioning, audio, sensor-interface, and current-to-voltage conversion circuits.
What is the operating voltage range of OPA341UA?
The OPA341UA supports operation up to a maximum supply voltage of 5.5 V. Its minimum operating supply voltage and any recommended operating region are not stated in the manufacturer product-page summary, so they should be confirmed from the electrical-characteristics table in the Texas Instruments datasheet before design release. Rail-to-rail input and output behavior must also be evaluated at the particular supply voltage selected for the circuit.
Where can I download the OPA341UA datasheet PDF?
The OPA341UA manufacturer datasheet PDF is available directly from Texas Instruments at https://www.ti.com/lit/ds/symlink/opa341.pdf. The document covers the OPA341 and OPA2341 family, including the single-supply rail-to-rail operational amplifier with shutdown. Use its pin-description table when assigning PCB signals and its electrical-characteristics table for minimum supply voltage, bias current, offset voltage, slew rate, and shutdown behavior.
Where can I find the OPA341UA pinout?
The OPA341UA uses an 8-pin SOIC configuration with OUT, IN−, IN+, V−, shutdown, and V+ assignments, plus two no-connect positions. Use the pin-description table and package drawing in the Texas Instruments OPA341 datasheet when laying out the footprint. The exposed functionality includes pin 5 for shutdown, so assigning that pin as a regular input can prevent the intended low-power state from being reached.
What is the gain-bandwidth product of OPA341UA?
The OPA341UA has a 5.5 MHz gain-bandwidth product. According to the Texas Instruments OPA341 product-page summary, this bandwidth supports general-purpose amplification and moderate-frequency signal conditioning. The usable closed-loop bandwidth also depends on the selected noise gain, so a practical filter or amplifier stage should be evaluated against the manufacturer datasheet rather than treating the 5.5 MHz figure as a guaranteed signal rate.
Is OPA341UA rail-to-rail?
Yes, the OPA341UA supports rail-to-rail input and output operation. This allows the amplifier to accept signals close to the positive or negative supply rail and drive its output toward the available output range. The exact input and output swing limits depend on supply voltage and load, so the manufacturer datasheet should be consulted for headroom requirements in the target circuit.
Does OPA341UA have a shutdown function?
The OPA341UA includes a shutdown function intended to reduce power consumption when amplification is not required. Texas Instruments identifies the OPA341 as a single-supply, rail-to-rail operational amplifier with shutdown. The shutdown pin is part of the 8-pin SOIC pinout; its active logic level and required sequencing should be taken from the manufacturer datasheet when designing control logic.
Where can I buy OPA341UA online?
Use the Request a Quote form on this page to request OPA341UA availability, unit pricing, and lead time from XAIPART. The inquiry should identify the exact OPA341UA manufacturer part number and the required delivery quantity so the request can be matched to the correct 8-pin SOIC device rather than another member of the broader OPA341 family.
What is the price of OPA341UA?
Current OPA341UA pricing is presented through XAIPART's Request a Quote workflow because commercial terms and component availability can change. Submit the exact MPN and required quantity through the Request a Quote form on this page. This avoids substituting prices for a different OPA341 order code, package, or reel configuration.
What is the lead time for OPA341UA?
Request the current OPA341UA lead time by submitting the exact MPN and required quantity through the Request a Quote form on this page. Lead time depends on factory availability, order quantity, and delivery conditions. The manufacturer identifies OPA341UA as an 8-pin SOIC standard general-purpose amplifier, so include any required date, inspection, or shipment details with the request.
Is OPA341UA in stock?
Current OPA341UA stock status should be confirmed through the Request a Quote form on this page. Include the exact quantity, target date, and shipment destination in the request. Checking only the broader OPA341 family may return a different package or order code and would not establish availability for OPA341UA specifically.
What is the difference between OPA341UA and OPA340UA?
The principal functional distinction is shutdown capability: the OPA341UA includes a shutdown function, whereas the OPA340UA is the non-shutdown family member. Both are Texas Instruments single, rail-to-rail operational amplifiers associated with the microAmplifier family and SOIC-8 packaging. Because OPA340UA does not provide the same shutdown control, verify every pin assignment and signal function in the manufacturer datasheet before treating it as a replacement.
What is the difference between OPA341UA and OPA337UA?
OPA341UA and OPA337UA are related low-voltage, rail-to-rail operational-amplifier families, but OPA341UA includes the shutdown feature identified in the Texas Instruments product information. Their exact DC, AC, noise, and pin-level differences must be checked in their respective manufacturer datasheets. For an existing OPA341UA PCB, the shutdown connection and all other assigned pins should be compared before considering OPA337UA as a replacement.
When should I choose OPA341UA over OPA340UA?
Choose OPA341UA when the circuit needs a dedicated shutdown control, especially in portable, battery-powered, or intermittently sampled systems. Choose OPA340UA when shutdown is unnecessary and the board does not depend on the OPA341 shutdown pin behavior. Both options are appropriate only after their supply ranges, input/output swing, stability requirements, and pin assignments have been compared against the design requirements.
Is OPA341UA suitable for audio and DAC output applications?
The OPA341UA is suitable for many low-voltage audio and DAC-output signal-conditioning applications because it combines rail-to-rail input and output operation with a 5.5 MHz gain-bandwidth product. The manufacturer specifically describes the OPA341 family for general-purpose, audio, and DAC current-to-voltage conversion applications. Output-swing, load, noise, and shutdown requirements should be checked against the manufacturer datasheet for the exact implementation.
What is the best drop-in replacement for OPA341UA?
No alternate OPA341UA drop-in replacement can be confirmed from the available manufacturer product information and cross-reference results. A true replacement must preserve the SOIC-8 footprint, pin functions including shutdown, 5.5 MHz bandwidth, and rail-to-rail behavior. Use the Texas Instruments cross-reference search or submit the exact MPN through the Request a Quote form on this page for a production-sourcing recommendation.

工程参考数据: OPA341UA ——对比、设计指导和合规信息。

选型指南

Choose OPA341UA when the design requires a single low-voltage op amp with rail-to-rail input and output operation, a 5.5 MHz gain-bandwidth product, and an active shutdown control. It is particularly useful in portable instruments, audio paths, sensor interfaces, and DAC current-to-voltage converters that benefit from a defined low-power state. OPA341UA/2K5 is the preferable choice when the electrical design is unchanged but the required reel configuration is 2500 pieces. Consider OPA340UA only when shutdown is unnecessary and the circuit does not depend on the OPA341 shutdown pin. OPA337UA is a possible same-family replacement for carefully reviewed boards, but its pin assignments and shutdown behavior must be checked before substitution. In every case, verify supply range, common-mode limits, output headroom, noise, stability, and temperature requirements against the manufacturer datasheet.

与替代料对比

参数 本产品 OPA341UA/2K5 OPA340UA OPA337UA
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Number of Amplifiers 1 circuit 1 circuit 1 circuit 1 circuit
Gain-Bandwidth Product 5.5 MHz 5.5 MHz 5.5 MHz 5.5 MHz
Maximum Supply Voltage 5.5 V 5.5 V 5.5 V 5.5 V
Input Common-Mode Range Rail-to-rail input Rail-to-rail input Rail-to-rail input Rail-to-rail input
Output Type Rail-to-rail output Rail-to-rail output Rail-to-rail output Rail-to-rail output

关键差异点

  • Integrated shutdown control within a general-purpose rail-to-rail amplifier (对比 OPA340UA)
  • Same 5.5 MHz performance class in a common SOIC-8 footprint (对比 OPA337UA)
  • Identical electrical configuration with a production reel order option (对比 OPA341UA/2K5)

设计说明

Place the input, output, and supply connections so that feedback traces remain short and minimize parasitic capacitance around high-impedance nodes. Connect the bypass capacitor directly between the V+ and V− pins, with its ground return terminating close to the device. Keep the SOIC-8 footprint free of unintended copper beneath sensitive input routes if the application uses high source impedance.

Design the shutdown control so it cannot float during reset or brownout conditions. Pull the shutdown pin to the state required for normal operation, account for its logic levels and current in the control circuit, and avoid driving the pin through a long trace that could pick up noise. Sequencing is especially important when the amplifier shares a supply rail with a DAC or precision sensor.

Select the feedback resistors and gain according to the 5.5 MHz gain-bandwidth product and the required closed-loop bandwidth. At low noise gains, verify capacitive-load stability using the manufacturer guidance rather than adding large capacitors directly at the output. For current-to-voltage conversion, keep the feedback resistor close to the inverting input and use the datasheet's recommended compensation arrangement when driving practical load capacitances.

Do not assume rail-to-rail input means unlimited input range or that the output can reach either supply rail under every load. Check input common-mode limits, output headroom, and maximum supply voltage for the selected operating point. Also avoid treating the OPA341UA as a direct substitute for a non-shutdown amplifier without reviewing pin 5 and confirming how the original board drives that node.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer product information confirms an extended-temperature industrial amplifier but does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.

相关搜索

OPA341UA datasheet OPA341UA pinout OPA341UA datasheet pdf OPA341UA equivalent OPA341UA replacement OPA341UA price OPA341UA stock Texas Instruments OPA341UA OPA341UA SOIC-8 pinout OPA341UA vs OPA340UA OPA341UA application circuit OPA341 5.5MHz rail-to-rail op amp

相关元器件 & 术语

Texas Instruments OPA341UA OPA341 OPA2341 OPA340UA OPA337UA OPA341UA/2K5 operational amplifier op amp amplifier IC analog signal conditioning rail-to-rail input rail-to-rail output gain-bandwidth product shutdown function SOIC-8 SOIC package family surface mount SMD current-to-voltage conversion DAC sensor interface audio preamplifier active filter battery-powered instrumentation
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情