OPA684ID - Low-Power Current-Feedback Amp | Texas Instruments
料号: OPA684ID ✓ 量产中OPA684ID 概述
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inputs while providing feedback-defined gain, bandwidth, output impedance, and signal-integrity behavior. The OPA684ID belongs to the current-feedback operational-amplifier family, a topology particularly suited to high-speed, low-gain signal paths. In the broader semiconductor hierarchy, it is an analog mixed-signal IC, operational amplifier, voltage-feedback or current-feedback signal-conditioning amplifier, and surface-mount semiconductor.
The principal system feature is the integrated disable control. Normal operation is obtained by leaving the disable input open or driving it HIGH. A LOW disable state reduces supply current to less than 100 µA and places the I/O pins in a high-impedance state, making the amplifier suitable for power-managed analog channels, instrument sharing, and staged systems in which an amplifier must be isolated when it is not needed.
OPA684ID is identified as a one-circuit amplifier in an 8-pin SOIC package. This package places the device in the SOIC surface-mount family and supports compact analog layouts where the amplifier must be placed close to its source and load. Exact voltage ranges, bandwidth, slew rate, output-current capability, input-offset characteristics, noise figures, supply-current conditions, and environmental limits must be confirmed from the Texas Instruments OPA684 datasheet before final circuit release.
Typical application roles include video-signal conditioning, communications-interface buffering, data-acquisition front ends, test-and-measurement instrumentation, industrial control modules, and general high-speed analog signal chains. Its current-feedback architecture and integrated shutdown behavior make it useful where signal propagation and controlled power state are both important design considerations.
When laying out a board around OPA684ID, place input, output, supply, and decoupling connections according to the manufacturer’s recommended topology, keep feedback traces short, and provide local supply bypassing to limit high-frequency supply noise. Confirm the exact disable-pin location, polarity, package drawing, and operating limits in the manufacturer pin-description table before assigning PCB tracks.
This product page consolidates the verified package information, disable behavior, sourcing workflow, drop-in alternatives, and application guidance for OPA684ID. It also separates confirmed technical facts from parameters that require datasheet confirmation, helping engineers make a defensible sourcing and layout decision without relying on ambiguous catalog summaries.
直接替换替代料: OPA684ID ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
OPA681ID
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
OPA682ID
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
OPA683ID
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →OPA680ID
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
OPA684ID 最大额定值与电气特性
| Product Type | Low-power current-feedback operational amplifier with disable |
| Number of Circuits | 1 circuit |
| Amplifier Architecture | Current feedback |
| 封装 | 8-pin SOIC (D) |
| Package Family | SOIC surface-mount package family |
| Disable Supply Current | Less than 100 µA |
| Disabled Output State | High impedance |
| Disabled Input State | High impedance |
| Disable Control State | LOW for disable; open or HIGH for normal operation |
OPA684ID soic surface-mount package family 引脚配置指南
OPA684ID(soic surface-mount package family 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: OPA684ID.
请参阅 数据手册 以查看完整引脚配置。
典型应用
OPA684ID 适用于 6 应用s: Low-Power Video Signal Conditioning, Communications Interface Buffering, Data-Acquisition Front End, Test and Measurement Instrumentation, Industrial Control and Monitoring, Portable and Battery-Powered Electronics.
Low-Power Video Signal Conditioning
OPA684ID fits video-signal conditioning paths that require a current-feedback amplifier with controlled standby behavior. Its single-circuit 8-pin SOIC implementation keeps the circuit compact, while the disable input allows the amplifier to be removed from the active signal path when it is not required. Pulling disable LOW reduces supply current to less than 100 µA and places the I/O pins in a high impedance, which is useful in multi-source video systems where unused channels should not influence signal routing. The designer should still confirm gain-bandwidth product, output swing, slew rate, and gain stability for the intended video standard before release.
推荐
Communications Interface Buffering
OPA684ID can provide high-speed differential or single-ended signal conditioning in communications equipment when its bandwidth and output-drive limits meet the interface requirements. The current-feedback topology is useful in short feedback-loop analog paths, while the integrated disable function supports power-managed channel states. Leaving the disable pin open or HIGH provides normal amplification; pulling it LOW reduces supply current to less than 100 µA and isolates the I/O pins with a high-impedance state. Impedance matching, gain distribution, output swing, and stability must be verified against the communication standard and the complete signal-chain specification.
推荐
Data-Acquisition Front End
OPA684ID is applicable in a data-acquisition front end when the selected amplifier stage requires low standby consumption and controllable isolation. Its 8-pin SOIC package supports placement close to an analog sensor or converter, and the disable input can turn off the amplifier between acquisitions. In disabled mode, supply current falls to less than 100 µA and the I/O pins become high impedance, reducing loading concerns during inactive intervals. Input bias current, offset voltage, noise density, settling behavior, and common-mode limits must be confirmed from the manufacturer datasheet against the acquisition accuracy and sampling requirements.
推荐
Test and Measurement Instrumentation
OPA684ID suits instrument front ends that need an amplifier to enter a low-power state between measurements. A single amplifier circuit in an 8-pin SOIC can be placed near the measurement input, and the disable pin provides a direct control method for reducing supply current to less than 100 µA. The high-impedance disabled outputs can help prevent an inactive stage from disturbing other shared test paths. For accurate metrology, verify input-offset voltage, input bias current, noise, bandwidth, and output-accuracy limits, and confirm that the selected feedback network remains stable at the intended gain.
推荐
Industrial Control and Monitoring
OPA684ID can condition rapidly changing analog signals in industrial monitoring modules while supporting controlled operating states. Its 8-pin SOIC package is compatible with compact surface-mount assemblies, and the shutdown behavior reduces supply current to less than 100 µA when the monitored channel is inactive. Pulling disable LOW also creates high-impedance I/O behavior, which can reduce unintended interaction with shared analog buses. Industrial implementations must verify the operating-temperature range, supply limits, noise performance, output-current capability, and electromagnetic-emissions requirements before using the amplifier in a finished control system.
推荐
Portable and Battery-Powered Electronics
OPA684ID is suitable for portable analog electronics where an amplifier must operate efficiently when active and consume very little power when disabled. The confirmed less-than-100-µA disabled supply current provides a clear low-power state, while high-impedance I/O behavior helps isolate the circuit during standby periods. Its 8-pin SOIC package can be placed close to the sensor or signal source to reduce sensitive trace length. Battery-life calculations should separately include active-mode current, quiescent current, load current, and disable leakage because those operating-state values must be taken from the manufacturer datasheet.
推荐
推荐产品汇总
工程参考数据: OPA684ID ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | OPA681ID | OPA682ID | OPA683ID | OPA680ID |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin SOIC (D) | 8-pin SOIC (D) | 8-pin SOIC (D) | 8-pin SOIC (D) | 8-pin SOIC (D) |
| Product Type | Low-power current-feedback operational amplifier with disable | Current-feedback operational amplifier | Current-feedback operational amplifier | Current-feedback operational amplifier | Current-feedback operational amplifier |
关键差异点
- Defined low-power shutdown state (对比 OPA681ID)
- Integrated control for channel isolation (对比 OPA682ID)
- Compact single-circuit implementation (对比 OPA683ID)
设计说明
Use the disable input as a deliberate power-management control rather than tying it permanently without reviewing the intended operating mode. According to the Texas Instruments OPA684 product information, an open or HIGH disable input permits normal operation, while a LOW input reduces supply current to less than 100 µA and places the I/O pins in a high-impedance state. Confirm the logic-level thresholds, active-mode current, and disable leakage against the system supply and timing requirements before finalizing the control circuit.
Place the OPA684ID close to the signal source, feedback network, and load to minimize sensitive trace lengths and parasitic capacitance. Follow the manufacturer’s recommended layout for supply bypassing, feedback routing, and grounding. Use the pin-description table to identify the exact package terminals, because a generic 8-pin SOIC drawing does not establish the function of each OPA684ID pin. Keep disable routing away from high-slew-rate analog and switching nodes to reduce accidental coupling.
Do not assume that every member of the OPA68 family is an automatic OPA684ID replacement. Although the candidate alternatives use the same 8-pin SOIC format, differences in disable logic, gain-bandwidth product, slew rate, output drive, supply range, and stability can alter circuit behavior. Compare the complete manufacturer datasheets, reproduce the existing feedback network, and verify amplitude, bandwidth, output swing, and disabled-state isolation before approving a substitution.
Evaluate the selected feedback resistor and gain network for stable current-feedback operation at every intended gain. Confirm the gain-bandwidth product, recommended feedback value, output-swing limits, and capacitive-load behavior in the manufacturer datasheet. Keep the feedback loop compact and observe the recommended output and input component placement. If the circuit drives long cables, significant capacitance, or a high-impedance node, evaluate transient response and overshoot rather than relying only on nominal bandwidth.
Local supply bypassing should be placed directly at the OPA684ID supply pins according to the manufacturer’s recommended application circuit. High-speed amplifier supply current can create small ground and supply transients even when the architecture is not a switching regulator. Use a quiet ground return, minimize loop area, and separate sensitive input and feedback routes from digital, clock, and power-converter paths. Validate conducted and radiated emissions at the finished product level because the IC package alone does not determine system compliance.
合规信息
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified in the verified catalog records. Confirm these attributes using the manufacturer product page or applicable declarations before procurement.