OPA683ID - 1.44GHz Current-Feedback Amplifier | Texas Instruments
料号: OPA683ID ✓ 量产中OPA683ID 概述
A current-feedback operational amplifier is a voltage-feedback amplifier subclass that uses feedback-network current, rather than differential input voltage alone, to establish closed-loop gain. Current-feedback amplifiers sit within the broader operational-amplifier and analog-signal-processing hierarchies. Their high bandwidth and slew capability make them useful in video, communications, instrumentation, and data-conversion interfaces where a conventional general-purpose amplifier may not provide sufficient operating speed.
The OPA683ID combines its 1.44 GHz bandwidth with a low-power design and a dedicated disable function. The disable control allows the amplifier to enter a low-power state when the associated signal path is not required, which can help reduce system power consumption. Its single-amplifier configuration simplifies designs that need one high-speed analog channel rather than a multi-amplifier package. The 8-pin SOIC (D) package also supports conventional surface-mount PCB assembly.
Unlike a general-purpose voltage-feedback amplifier optimized around nearly constant gain-bandwidth behavior, the OPA683ID uses current-feedback architecture. The exact closed-loop gain, output amplitude, output impedance, load, and feedback-resistor selection must therefore be evaluated together rather than treated as an independent gain-bandwidth calculation. The manufacturer datasheet remains the controlling document for these relationships and for the minimum recommended feedback resistance.
Typical uses include video-signal conditioning, communications infrastructure, high-speed instrumentation, test and measurement equipment, and interface circuitry associated with high-speed converters. The amplifier can also be used where its disable function supports controlled power management in intermittently active signal chains. External signal conditioning may still be required when source impedance, cable capacitance, or output loading exceed the recommended operating conditions.
PCB implementation requires a low-inductance ground reference, short feedback traces, and careful separation between input and output paths. Place the feedback components close to the device, terminate unused inputs and outputs appropriately, and confirm stability with the actual source and load impedances. Decoupling capacitors should be positioned directly beside the supply pins according to the manufacturer layout guidance.
This page combines package, bandwidth, temperature, lifecycle, sourcing, replacement, and design considerations into a compact engineering reference. It also distinguishes verified drop-in alternatives from parts that are merely similar amplifiers, helping designers preserve package compatibility, pin behavior, and the intended current-feedback performance before approving a substitution.
直接替换替代料: OPA683ID ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
OPA687ID
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
OPA683ID 最大额定值与电气特性
| Amplifier Type | Current-feedback operational amplifier |
| Number of Circuits | 1 circuit |
| Gain-Bandwidth Product | 1.44 GHz |
| Disable Function | Yes |
| 工作温度范围 | -40°C to +85°C |
| 封装 | 8-pin SOIC (D), 3.90 mm body width |
| 安装类型 | Surface mount |
| RoHS 状态 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
OPA683ID 8-pin soic (d), 3.90 mm body width 引脚配置指南
OPA683ID(8-pin soic (d), 3.90 mm body width 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: OPA683ID.
请参阅 数据手册 以查看完整引脚配置。
典型应用
OPA683ID 适用于 6 应用s: Wideband Video Signal Conditioning, Communications Interface Amplification, High-Speed Instrumentation Signal Paths, Test and Measurement Equipment, Data Converter Interface, Portable Battery-Powered Analog Equipment.
Wideband Video Signal Conditioning
The OPA683ID fits video-conditioning paths that require a 1.44 GHz current-feedback amplifier in an 8-pin SOIC package. It can amplify or level-shift video signals when the selected feedback network supports the intended closed-loop gain and the source and load impedances remain compatible with the manufacturer's stability guidance. The disable function provides a practical way to reduce power demand when a video channel is inactive. Keep the feedback resistor close to the amplifier, use a low-inductance ground plane, and maintain short traces to minimize added distortion and instability.
推荐
Communications Interface Amplification
OPA683ID is suitable for communications interface amplification where a 1.44 GHz bandwidth and current-feedback architecture are needed to process moderate-frequency signals through short PCB paths. Its very-low-power design is useful in portable or intermittently active communication equipment, while the disable function allows the amplifier to be shut down when the associated RF or baseband path is inactive. The exact signal amplitude and impedance environment must be checked against the datasheet, particularly for cable loading, source impedance, output drive, and stable feedback resistance.
推荐
High-Speed Instrumentation Signal Paths
The OPA683ID can serve as a wideband instrumentation amplifier stage when the measurement bandwidth requires the device's 1.44 GHz gain-bandwidth product. It is especially relevant where low power and a shutdown function are useful for portable test equipment. Front-end attenuation, gain, input protection, and sensor drive requirements must be designed around the amplifier's input range, output swing, and current capability. Use short, shielded signal routes where appropriate and validate stability with the complete sensor, cable, and termination network rather than an ideal source model.
推荐
Test and Measurement Equipment
OPA683ID is appropriate for compact test and measurement equipment that needs a fast, low-power signal-conditioning channel. Its 1.44 GHz bandwidth can accommodate high-bandwidth probes and transient signals, while the disable function can reduce consumption when a test channel is idle. A practical implementation should include controlled input termination, short feedback paths, and local supply bypassing to preserve measurement integrity. Confirm the required output amplitude, load, source impedance, and gain against the manufacturer data before defining the surrounding attenuator and driver circuitry.
推荐
Data Converter Interface
The OPA683ID can be used in interface paths around high-speed data converters when the converter requires an amplifier with wide bandwidth and low power. Its 1.44 GHz gain-bandwidth product provides bandwidth for edge-rate requirements, while its current-feedback architecture can be advantageous with the correct feedback impedance. The amplifier should be placed close to the converter or isolation resistor, and its inputs and outputs should be routed away from noisy digital and clock paths. Use the manufacturer's recommended decoupling and feedback arrangements to avoid converter-edge ringing.
推荐
Portable Battery-Powered Analog Equipment
OPA683ID is suitable for portable battery-powered analog equipment because Texas Instruments describes it as a very-low-power current-feedback amplifier and includes an active disable function. The 1.44 GHz bandwidth supports wideband processing without requiring a larger high-speed amplifier package, while shutdown can reduce demand when the instrument is between measurements. Power architecture should account for the exact quiescent current, active current, and disable leakage from the manufacturer data. The complete signal path must also remain stable over the battery-voltage range and across source and load variations.
推荐
推荐产品汇总
工程参考数据: OPA683ID ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | OPA687ID |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 8-pin SOIC (D) | 8-pin SOIC (D) |
| Amplifier Architecture | Current-feedback | Current-feedback |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 1.44 GHz | Approximately 1.5 GHz |
| Disable Function | Yes | Yes |
| Special Features | Very-low-power wideband amplifier with disable | Wideband current-feedback amplifier with disable |
关键差异点
- Closely matched same-family bandwidth (对比 OPA687ID)
- Integrated power-state control (对比 OPA687ID)
- Purpose-built very-low-power wideband positioning (对比 OPA687ID)
设计说明
Place the feedback resistor and its return path directly beside the OPA683ID pins, and keep the input and output routing short. Use a continuous ground plane with no split beneath the device, and place supply-bypass capacitors at the closest available supply and ground pins. High-speed current-feedback amplifiers can amplify trace inductance, parasitic capacitance, and impedance discontinuities, so the physical layout should be treated as part of the feedback network.
Validate stability with the actual source impedance, transmission-line loading, output load, and selected feedback resistor rather than assuming ideal sources. Current-feedback amplifiers do not follow voltage-feedback bandwidth rules, and changing source impedance can alter frequency response. If ringing appears, verify grounding, component placement, feedback-loop length, output isolation, and termination before increasing the feedback resistance.
Do not infer disable polarity or inactive output behavior from the product description. Read the logic thresholds and timing information in the manufacturer data, and ensure external circuitry cannot back-drive the disabled output. Also check maximum input and output voltages under every operating state. The -40°C to +85°C rating identifies the operating temperature range, but it does not by itself guarantee performance across every combination of supply, load, and source impedance.
合规信息
The verified manufacturer and distributor information does not state the requested compliance statuses. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations for the exact orderable MPN and current manufacturing status.