P1013NSE2HFB - QorIQ P1 800MHz SoC | NXP Semiconductors
料号： P1013NSE2HFB ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $90 | $90.00 |
| 10 | $81.5 | $815.00 |
| 100 | $73.8 | $7,380.00 |
| 500 | $66.2 | $33,100.00 |
| 1,000 | $58.9 | $58,900.00 |
P1013NSE2HFB 概述
QorIQ P1 series SoCs belong to the communications processor family, sitting within the broader Power Architecture microprocessor taxonomy (Power Architecture -> MPU -> microprocessor -> IC). These parts target embedded networking, industrial control, and secure media processing workloads where integration reduces BOM and board area versus discrete CPU + Northbridge designs. Compared to traditional host processors, QorIQ P1 devices trade multi-GHz performance for deterministic real-time response and rich connectivity peripherals.
Key features include an 800/667/400 MHz triple-speed e500v2 core with 36-bit physical addressing, integrated security engine (SEC) for IPsec, SSL/TLS, and bulk cryptography, dual GbE controllers with SGMII support, PCIe Gen 2.0 endpoint/root complex, USB 2.0 with ULPI, and a 16-bit DDR2/DDR3 memory controller with ECC up to 800 MT/s. The LCD controller supports TFT panels up to WXGA resolution. Power dissipation typically runs around 4-6 W depending on frequency grade and operating conditions.
Architecturally, the P1013 uses a 45 nm low-power CMOS process with hardware-accelerated cryptography blocks offloaded from the core. The e500v2 core includes double-precision FPU, MMU, and 32 KB L1 I-cache plus 32 KB L1 D-cache. Fabric is a coherent CoreNet platform supporting concurrent DMA, security, and packet processing without saturating the CPU.
Typical applications include industrial gateways, secure routers, factory automation controllers, network-attached storage (NAS), point-of-sale terminals, single-board computers (SBC), and Human-Machine Interface (HMI) panels. The integrated GbE and SEC make it especially suitable for VPN concentrators and firewalls where hardware crypto offload is essential.
When designing, ensure proper thermal management with at least 4-layer PCB and thermal vias under the exposed pad. Use ECC-enabled DRAM for reliable operation in industrial temperature range. Configure SEC early in boot to enable encrypted boot for security-sensitive deployments.
直接替换替代料： P1013NSE2HFB ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： P1013NSE2HFB （相同外形与封装尺寸） ——差异在于 LCD Controller, Memory Controller, Operating Temperature, Security Engine, USB.
快速对比工具——选择替代料号进行并排对比：
P1013NSN2HFB
✅ 直接替换📋 参考替代料（不在目录中）
P1013NSN2EFB
📋 参考替代料（不在目录中）
P1022NSE2HFB
✅ 直接替换✓ 有现货
$75 / 个
查看数据手册 →P1024NSE2HFB
✅ 直接替换📋 参考替代料（不在目录中）
P1025NSE2HFB
✅ 直接替换📋 参考替代料（不在目录中）
P1013NSE2HFB 最大额定值与电气特性
| Architecture | PowerPC e500v2 (Power Architecture) |
| Core Count | 1 |
| 数据总线宽度 | 32-bit |
| Core Frequency | 800 MHz (max) |
| Operating Frequency Range | 800/667/400 MHz |
| Memory Controller | DDR2/DDR3 with ECC, 16-bit, up to 800 MT/s |
| Ethernet | Dual Gigabit Ethernet (SGMII/RGMII) |
| PCIe | PCIe 2.0 (x1 / x2 lanes) |
| USB | USB 2.0 with ULPI |
| Security Engine | SEC (IPsec, SSL/TLS, bulk crypto) |
| LCD Controller | Yes (TFT, up to WXGA) |
| 工作温度 | 0C to 105C |
| 封装 | 689-TEPBGA II (31x31 mm) |
| 安装类型 | Surface Mount (BGA) |
| RoHS 状态 | Compliant |
P1013NSE2HFB 689-tepbga ii (31x31 mm) 引脚配置指南
P1013NSE2HFB（689-tepbga ii (31x31 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： P1013NSE2HFB.
请参阅 数据手册 以查看完整引脚配置。
典型应用
P1013NSE2HFB 适用于 6 应用s: Industrial Gateway, Secure Router / Firewall, Network-Attached Storage (NAS), Point-of-Sale (POS) Terminal, Human-Machine Interface (HMI) Panel, Single-Board Computer (SBC) / Embedded Platform.
Industrial Gateway
The P1013NSE2HFB fits industrial gateway designs because its dual GbE ports, hardware-accelerated IPsec/SSL security engine, and 800 MHz e500v2 core deliver line-rate VPN throughput at modest power. The integrated DDR2/DDR3 controller with ECC ensures reliable operation in factory-floor environments where memory soft errors would otherwise cause data corruption. Compared to a discrete CPU + external crypto ASIC, the SoC approach shrinks BOM and PCB area while simplifying thermal design. The 0C-105C operating range covers most indoor industrial enclosures. Recommended companion parts include a PHY transceiver for each GbE port and an ECC DIMM for the memory controller.
推荐
Secure Router / Firewall
The P1013NSE2HFB is well-suited for secure router and firewall applications because its SEC block offloads IPsec, SSL/TLS, AES, and SHA from the CPU, enabling multi-gigabit VPN throughput without the latency spikes that plague software-only crypto stacks. The dual GbE ports separate WAN and LAN segments, while the PCIe 2.0 interface can host a Wi-Fi 6 or LTE modem card. Operating at 0C-105C and integrating ECC DRAM support makes it deployable in climate-controlled network closets and outdoor enclosures alike. Compared to a generic ARM SoC, the e500v2 architecture provides deterministic real-time response for packet processing.
推荐
Network-Attached Storage (NAS)
The P1013NSE2HFB serves NAS designs because the 800 MHz e500v2 core with 32 KB L1 caches handles file-serving, RAID management, and SMB/NFS protocol stacks for small-to-medium deployments. The integrated LCD controller enables direct attachment of a status display, eliminating an external microcontroller. Hardware crypto acceleration speeds up encrypted volume operations and SSL/TLS access without bottlenecking throughput. Compared to a desktop CPU, the QorIQ SoC draws less power and integrates storage interfaces natively. Designers typically pair the SoC with an external SATA or SAS controller over PCIe for multi-disk support.
推荐
Point-of-Sale (POS) Terminal
The P1013NSE2HFB is appropriate for POS terminal designs because the integrated LCD controller drives the operator touchscreen directly, while the SEC engine protects PIN pad and card reader data flows with hardware-accelerated AES and TLS. The USB 2.0 port with ULPI connects to barcode scanners and receipt printers. ECC DRAM support prevents transaction corruption from soft errors, important for retail financial environments. Compared to x86-based POS terminals, the QorIQ architecture provides lower power consumption and instant-on boot, while still running Linux or VxWorks for application flexibility.
推荐
Human-Machine Interface (HMI) Panel
The P1013NSE2HFB suits HMI panels because its built-in LCD controller supports TFT displays up to WXGA resolution, eliminating a separate graphics controller. The 800 MHz e500v2 runs Qt or Web-based HMIs smoothly while the GbE ports handle industrial Ethernet protocols (EtherCAT, PROFINET) via stack offload. Hardware security enables encrypted firmware updates and tamper detection. Compared to a microcontroller-only HMC, the QorIQ SoC offers more headroom for complex visualizations, dashboards, and predictive maintenance analytics at the edge. The 0C-105C range covers most factory and outdoor cabinet installations.
推荐
Single-Board Computer (SBC) / Embedded Platform
The P1013NSE2HFB fits SBC and embedded platform designs because its high level of integration - GbE, PCIe, USB, DDR controller, LCD, and SEC - allows a full-featured carrier board with minimal external chips. The 800 MHz e500v2 core with hardware FPU accelerates signal processing and image handling for edge-compute workloads. The 689-TEPBGA II package, while large, exposes all peripherals without requiring an external bus arbiter. Compared to a Raspberry-Pi-class SoC, the QorIQ delivers deterministic real-time response, ECC memory, and industrial temperature range at the cost of higher power and BGA assembly complexity.
推荐
推荐产品汇总
工程参考数据： P1013NSE2HFB ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | P1013NSN2HFB | P1013NSN2EFB | P1022NSE2HFB | P1024NSE2HFB | P1025NSE2HFB |
|---|---|---|---|---|---|---|
| Package | 689-TEPBGA II (31x31 mm) | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | PowerPC e500v2 (1 core) | PowerPC e500v2 (1 core) | PowerPC e500v2 (1 core) | PowerPC e500v2 (2 cores) | PowerPC e500v2 (2 cores) | PowerPC e500v2 (2 cores) |
| Core Frequency | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 1.0 GHz | 1.0-1.2 GHz |
| Memory Controller | DDR2/DDR3 with ECC, 16-bit | DDR2/DDR3 with ECC, 16-bit | DDR2/DDR3 with ECC, 16-bit | DDR2/DDR3 with ECC, 32-bit | DDR2/DDR3 with ECC, 32-bit | DDR2/DDR3 with ECC, 32-bit |
| Ethernet | Dual GbE | Dual GbE | Dual GbE | Dual GbE | Dual GbE + 10GbE option | Dual GbE + 10GbE option |
| Security Engine | Yes (SEC) | Yes (SEC) | Reduced SEC feature set | Yes (SEC) | Yes (SEC) | Yes (SEC + enhanced) |
| Operating Temperature | 0C to 105C | 0C to 105C | 0C to 105C | 0C to 105C | -40C to 105C | -40C to 105C |
| Lifecycle Status | EOL | EOL | EOL | EOL | EOL | NRND |
关键差异点
- Single-core lower power than dual-core P1022 （对比 P1022NSE2HFB)
- Full SEC vs reduced SEC variant （对比 P1013NSN2EFB)
- Established mature platform （对比 P1025NSE2HFB)
设计说明
The 689-TEPBGA II package has substantial power dissipation (typically 4-6 W for the P1013 at 800 MHz). Estimated: assuming Theta_JA of approximately 15 C/W with a 6-layer PCB and thermal vias under the exposed pad, a 5 W load yields a junction temperature rise of 75C above ambient. A continuous 105C ambient operation requires either reduced frequency operation or a heatsink attached with thermal interface material. Always validate thermal design with the manufacturer's Power Estimation Tool under worst-case workload before committing to production.
The 689-ball TEPBGA II with 1.0 mm pitch demands a 6-layer or 8-layer PCB with microvia or HDI stack-up for fan-out routing. Use laser-drilled microvias at the BGA fan-out, and pair each signal via with a ground return via to control impedance. Place at least 9 thermal vias (0.3 mm diameter, filled) under the central exposed pad connecting top, inner, and bottom ground planes. Maintain 50 ohm controlled impedance for GbE traces, PCIe lanes, and DDR memory bus. Decoupling: 100 nF X7R per power pin plus 10 uF bulk tantalum per supply rail.
Do not omit the configuration of the Reset Configuration Word (RCW) source - typically an I2C EEPROM on the I2C bus. Missing or corrupted RCW prevents the part from booting and looks like a hardware failure. The SEC block requires initialization in U-Boot or similar bootloader to enable hardware crypto. The LCD controller requires correct timing parameters for the chosen panel or the display may show garbage. Lastly, the DDR controller requires the SPD (Serial Presence Detect) data from the DIMM to be loaded into the controller's MR/MRS registers during boot, not skipped.
合规信息
RoHS and lead-free per NXP product documentation. Not AEC-Q100 qualified - extended-temperature variants exist in the P1024/P1025 family. Halogen-free status not explicitly documented; treat as unknown.
