P3041NXE1MMB - QorIQ P3 Quad-Core 1.2GHz MPU | NXP
料号： P3041NXE1MMB ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $269.5 | $2,695.00 |
| 100 | $254 | $25,400.00 |
| 500 | $238.5 | $119,250.00 |
| 1,000 | $222.75 | $222,750.00 |
P3041NXE1MMB 概述
What is a QorIQ communications processor? QorIQ is NXP's umbrella platform for high-performance multicore Power Architecture (PowerPC) processors used in networking, telecom, and embedded compute. It sits in the product hierarchy: microprocessor -> application processor -> communications processor -> embedded SoC. QorIQ P-series parts integrate CPU cores, memory controllers, security engines, and high-speed SerDes I/O for routers, switches, base stations, and security appliances. Unlike general-purpose MPU brands, QorIQ is engineered for deterministic packet processing and trusted execution.
The P3041NXE1MMB key features include four e500mc cores at 1.2 GHz, integrated SEC 4.2 security/fabric accelerator with hardware encryption, dual DDR3/DDR3L memory controllers with ECC, multiple Ethernet interfaces (1/10 GbE capable), PCI Express and Serial RapidIO links, and a low-power standby mode. The 1295-FCPBGA package provides the high pin density required for the multi-channel parallel I/O and SerDes lanes.
Technically the device combines four out-of-order e500mc cores sharing a coherent platform cache, with the SEC 4.2 block handling symmetric/asymmetric crypto, public-key acceleration, and run-control integrity. The platform's Data Path Acceleration Architecture (DPAA) is also implemented for parsing, classification, and queue management. Compared with the earlier P2/P4 platforms, the P3041 is positioned as a lower-power, security-emphasized quad-core variant.
Typical applications include multi-function enterprise routers, secure VPN gateways, industrial firewalls, LTE/Wi-Fi small-cell base stations, and ruggedized industrial control platforms where AES/SHA hardware acceleration and the extended -40C to +105C temperature window are mandatory. Embedded computing SBCs (single-board computers) targeting defense and energy also use the part.
Designers should note that the 37.5 x 37.5 mm FCPBGA requires multi-layer PCB stackup with microvia or via-in-pad construction for breakout routing; thermal management must handle the multi-watt core power. Use NXP's CodeWarrior or Linux SDK to develop firmware for the e500mc cores.
This page consolidates current stock and pricing across DigiKey, Mouser, and authorized distributors, lists drop-in same-family variants for qualification/footprint reuse, and documents design notes beyond the public datasheet.
直接替换替代料： P3041NXE1MMB ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： P3041NXE1MMB （相同外形与封装尺寸） ——差异在于 Package, RoHS Status, Maximum Core Frequency, Series, Core Architecture.
快速对比工具——选择替代料号进行并排对比：
P3041NXN1MMB
✅ 直接替换✓ 有现货
$215 / 个
查看数据手册 →P3041NSN1MMB
✅ 直接替换✓ 有现货
$274.5 / 个
查看数据手册 →P3041NXE1PNB
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
P3041NXE1MMB 最大额定值与电气特性
| Manufacturer | NXP Semiconductors |
| Series | QorIQ P3 |
| Core Processor | PowerPC e500mc |
| Number of Cores | 4 |
| Core Architecture | 32-Bit RISC |
| Speed | 1.2 GHz |
| Co-Processors / DSP | Security; SEC 4.2 |
| RAM Controllers | DDR3, DDR3L |
| Graphics Acceleration | No |
| Ethernet | 10/100/1000 Mbps (1/10 GbE capable SerDes) |
| 工作温度 | -40C to +105C |
| 封装 | 1295-FCPBGA (37.5 x 37.5 mm) |
| 安装类型 | Surface Mount (BGA) |
| RoHS 状态 | Compliant (lead-free FCPBGA) |
| Encryption / Security | Hardware SEC 4.2 (AES, DES, SHA, public-key) |
| High-Speed I/O | PCIe, Serial RapidIO, multiple SerDes lanes |
P3041NXE1MMB 1295-fcpbga (37.5 x 37.5 mm) 引脚配置指南
P3041NXE1MMB（1295-fcpbga (37.5 x 37.5 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： P3041NXE1MMB.
请参阅 数据手册 以查看完整引脚配置。
典型应用
P3041NXE1MMB 适用于 6 应用s: Industrial Secure VPN Gateway, Multi-Function Enterprise Router, Ruggedized Industrial Controller, LTE / Wi-Fi Small-Cell Base Station, Network-Attached Secure Storage, Defense / Aerospace Embedded SBC.
Industrial Secure VPN Gateway
The P3041NXE1MMB powers industrial-grade VPN gateways with line-rate IPsec throughput thanks to its SEC 4.2 engine (hardware AES-256, SHA-2, RSA/ECC). The four 1.2 GHz e500mc cores handle concurrent tunnel termination, firewall rules, and routing tables; the -40C to +105C operating window ensures deployment in outdoor cabinets and factory floors. Engineers typically pair it with 4 GB DDR3L ECC memory and multiple GbE/10GbE SerDes lanes, while the integrated SEC 4.2 frees cores for control-plane software. Power dissipation sits in the 8-15 W range depending on core utilization, manageable with a heat-spreader-only solution.
推荐
Multi-Function Enterprise Router
P3041NXE1MMB is a strong fit for mid-range enterprise routers that combine WAN termination, NAT/firewall, and QoS in a single chassis. The quad-core e500mc architecture delivers line-rate packet processing for 1G/10G interfaces, while DPAA (Data Path Acceleration Architecture) offloads frame parsing and queue management. DDR3 with ECC sustains routing-table lookups; the SEC 4.2 engine adds wire-speed MACsec/IPsec for site-to-site VPN. The 1295-FCPBGA provides ample I/O for multi-port SerDes lanes connecting to external PHYs and PCIe peripherals, and the platform supports NXP's Linux SDK for fast firmware development.
推荐
Ruggedized Industrial Controller
P3041NXE1MMB suits rugged industrial controllers and HMIs deployed in factories, energy substations, or rail systems because of its -40C to +105C extended operating window and ECC-protected DDR3 interface. The four PowerPC cores run deterministic real-time control loops plus secure telemetry uploads, while SEC 4.2 protects Modbus/TCP and IEC 61850 traffic. Engineers appreciate the deterministic interrupt latency of the e500mc architecture for sub-millisecond control. Power design typically uses a 5-12 V input DC-DC stage that feeds the core's 1.0 V rail; thermal vias in the BGA land pattern dissipate the 8-15 W load.
推荐
LTE / Wi-Fi Small-Cell Base Station
In LTE small-cell and Wi-Fi access-point baseband processing, P3041NXE1MMB offers sufficient compute for PHY-layer handling of small-cell sectors plus the security stack. The SEC 4.2 engine accelerates cipher suites needed for LTE encryption (SNOW 3G, AES, ZUC) while the four cores deliver the throughput for L2/L3 protocol termination. The DDR3 interface handles high-bandwidth IQ sample buffering, and the multi-lane SerDes connects directly to RF front-end chipsets. The industrial temperature range supports outdoor small-cell deployments in cabinets exposed to ambient swings; the FCPBGA's flip-chip construction preserves signal integrity on the high-speed RF data paths.
推荐
Network-Attached Secure Storage
P3041NXE1MMB drives mid-range NAS and secure-storage appliances that combine RAID processing, encryption, and file-serving duties. The SEC 4.2 engine accelerates AES-XTS for self-encrypting drives, while the four cores manage filesystem operations and network protocols (SMB/NFS/iSCSI). DDR3 with ECC protects against silent data corruption, a critical requirement in storage designs. Multiple SerDes lanes attach to 1/10 GbE MACs and SAS/SATA controllers via PCIe. The industrial-grade temperature window supports use in non-datacenter environments; the platform's Linux SDK includes reference storage stacks that cut firmware development time.
推荐
Defense / Aerospace Embedded SBC
Single-board computers (SBCs) for defense and aerospace use the P3041NXE1MMB for trusted computing and secure boot with hardware root-of-trust via SEC 4.2. The four e500mc cores run partitioned real-time operating systems for sensor fusion, while the extended -40C to +105C temperature window supports avionics-grade deployment. The 1295-FCPBGA is soldered onto ruggedized PCBs with underfill and mechanical stiffeners. Engineers integrate the platform with MIL-STD-1553 or ARINC 429 transceivers via PCIe; power conditioning circuits handle wide-input 16-36 V avionics rails. NXP supports these designs with BSPs and security toolchains.
推荐
推荐产品汇总
工程参考数据： P3041NXE1MMB ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | P3041NXN1MMB | P3041NSN1MMB | P3041NXE1PNB |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 1295-FCPBGA (37.5x37.5) | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same |
| Core Count | 4 (e500mc) | 4 (e500mc) | 4 (e500mc) | 4 (e500mc) |
| Core Frequency | 1.2 GHz | 1.2 GHz | 1.2 GHz | 1.2 GHz |
| Security Engine | SEC 4.2 (encrypted) | No SEC (non-encrypted) | SEC (variant revision) | SEC 4.2 (encrypted) |
| Operating Temperature | -40C to +105C | 0C to +105C (standard) | -40C to +105C | -40C to +105C |
| Memory Controller | DDR3 / DDR3L with ECC | DDR3 / DDR3L with ECC | DDR3 / DDR3L with ECC | DDR3 / DDR3L with ECC |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete |
关键差异点
- Hardware SEC 4.2 encryption engine with line-rate IPsec/TLS offload （对比 P3041NXN1MMB)
- Industrial -40C to +105C operating window for outdoor/rugged use （对比 P3041NXN1MMB)
- Updated firmware/security revision for longer support lifecycle （对比 P3041NSN1MMB)
设计说明
Estimated: the 1295-FCPBGA at 37.5 x 37.5 mm with 0.8 mm pitch requires at least an 8-layer PCB stackup with microvia (laser-drilled) construction for breakout. Use via-in-pad with filled and plated-over vias on the BGA land pattern to route SerDes and DDR3 signals; maintain 100 ohm differential impedance for SerDes and 50 ohm single-ended for DDR3 traces. BGA underfill (epoxy resin) is recommended for harsh-environment reliability and to mitigate thermal cycling stress on the solder joints.
Estimated: P3041NXE1MMB dissipates approximately 8-15 W typical at 1.2 GHz with all four cores active and memory traffic, depending on workload. With a 1.0 V core rail and switching losses, design a heatsink or heat-spreader solution that keeps junction temperature below 105C at the upper end of the operating window. Use thermal vias in the land pattern and a copper coin or integrated heat spreader on the BGA top side; airflow of 1-2 m/s in the chassis is recommended for sustained workloads.
Do not substitute P3041NXE1MMB with P4080NSE7PNC (8-core QorIQ P5); although related, the BGA pinouts differ and the part is not drop-in. Verify the SEC 4.2 firmware (Secure Boot, JTAG disable) is provisioned before deployment - unlocked SEC can leak debug paths. Confirm the DDR3L voltage level (1.35 V vs DDR3 1.5 V) matches your memory ICs; mixing causes data corruption. Always validate boot from SPI NOR flash via NXP's CodeWarrior or U-Boot before production deployment.
合规信息
RoHS-compliant lead-free FCPBGA package per NXP product page. Not AEC-Q100 qualified (industrial networking, not automotive). Lifecycle: obsolete per ABC-Semi and multiple distributor listings.
