P3041NXN7NNC - QorIQ P3 4-Core 1.333GHz SoC | NXP
料号： P3041NXN7NNC ✓ 量产中P3041NXN7NNC 概述
A QorIQ communications processor is a class of multicore networking SoC originally developed by Freescale and now continued under NXP. It sits in the broader taxonomy of microprocessors -> embedded MPU -> multicore SoC -> communications processor, and functions as the central compute and I/O aggregation element in routers, switches, base stations, and industrial gateways that previously required an MPU plus multiple companion ASICs.
Key differentiating features of the P3041 include its heterogeneous hardware-blocks for packet processing (SEC security engine, PME pattern-matching engine), four integrated 10/100/1000 Mbps Ethernet MACs plus options for 1/10 GbE, two SATA controllers, three PCIe Gen2 controllers, and two Serial RapidIO ports. The platform supports up to 16 GB of DDR3/DDR3L with ECC at up to 1333 MT/s, and operating power is conservatively budgeted in the 15 W thermal envelope typical of the P3041 family.
Architecturally, the P3041 leverages a three-level cache (32 KB I/D L1 per core, 128 KB L2 per core, and a shared 1 MB CoreNet-coherent L3), interconnect via the CoreNet coherency fabric, and accelerates common networking primitives in dedicated engines rather than burning CPU cycles on them - yielding headroom for control-plane and Linux workloads alongside data-plane forwarding.
Typical applications include industrial control and HMI platforms, multi-service routers and managed switches, wireless base-station baseband, single-board computers and embedded Linux designs, secure gateways, and defense/aerospace networking equipment. The -40 to +105C temperature grade extends deployment to outdoor enclosures and vehicle telematics.
When designing in the P3041, plan for a multilayer (8+ layer) PCB with matched-impedance DDR3 routing, a robust power map (the part requires multiple voltage rails), and provision for a JTAG/COP debug header. The large 37.5 mm FCBGA package demands careful reflow profiling and bottom-side land inspection. NXP's CodeWarrior and the Linux SDK are the recommended software toolchains; third-party QorIQ BSPs (ELDK, Yocto layers) are also widely available.
This page consolidates distributor live-pricing, drop-in same-package alternatives, and design-side considerations beyond the manufacturer datasheet, helping sourcing engineers verify lifecycle risk and replacement options for the still-active QorIQ P3041 platform.
直接替换替代料： P3041NXN7NNC ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： P3041NXN7NNC （相同外形与封装尺寸） ——差异在于 Core Architecture, Core Frequency, Memory Controller, Mounting Type, Number of Cores.
P3041NXE7NNC
✅ 直接替换📋 参考替代料（不在目录中）
P3041E7NNC
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
P3041N7NNC
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
P4040NSE7MMC
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →P4080NSE7MMC
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
P3041NXN7NNC 最大额定值与电气特性
| Core Architecture | PowerPC e500mc, 32-bit |
| Number of Cores | 4 (quad-core) |
| Core Frequency | 1.333 GHz |
| Cache (L1) | 32 KB I + 32 KB D per core |
| Cache (L2) | 128 KB per core |
| Shared Cache (L3) | 1 MB (CoreNet coherent) |
| Memory Controller | DDR3 / DDR3L with ECC, up to 1333 MT/s |
| Ethernet | 10/100/1000 Mbps (5 ports); options for 1/10 GbE |
| PCIe | 3 x PCIe Gen2 controllers |
| SATA | 2 x SATA 2.0 |
| Serial RapidIO | 2 x lanes (per datasheet) |
| Security Engine | SEC 4.0 (cryptographic accelerator) |
| Pattern Matching Engine | Yes (PME) |
| Graphics Acceleration | No |
| 工作温度 | -40C to +105C |
| 封装 | 1295-pin FCBGA (FCPBGA), 37.5 x 37.5 mm |
| 安装类型 | Surface Mount (BGA) |
| RoHS 状态 | Compliant |
| Series | QorIQ P3 |
P3041NXN7NNC 1295-pin fcbga (fcpbga), 37.5 x 37.5 mm 引脚配置指南
P3041NXN7NNC（1295-pin fcbga (fcpbga), 37.5 x 37.5 mm 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： P3041NXN7NNC.
请参阅 数据手册 以查看完整引脚配置。
典型应用
P3041NXN7NNC 适用于 7 应用s: Multi-Service Routers, Industrial Managed Ethernet Switches, Defense & Aerospace Networking, Wireless Base Station Baseband, Secure IoT and Industrial Gateways, Embedded SBC / Industrial HMI Controllers, Network-Attached Storage (NAS) Controllers.
Multi-Service Routers
The P3041NXN7NNC is a natural fit for mid-range multi-service routers and edge routers because its four 1.333 GHz e500mc cores, the integrated SEC 4.0 security engine, the PME pattern-matching engine, and five 10/100/1000 Ethernet MACs (plus 1/10 GbE options) offload the data-plane and crypto workloads that would otherwise saturate a general-purpose CPU. Placed at the heart of a router mainboard alongside a DDR3-1333 SODIMM and a managed Ethernet PHY, it sustains IPsec tunnel throughput while leaving CPU headroom for routing daemons, NETCONF/YANG agents and telemetry collectors. Compared with separate MPU-plus-ASIC designs, the P3041 cuts board area and BOM by eliminating a forwarding engine, and its -40 to +105C grade lets the same platform be deployed in outdoor telecom cabinets.
推荐
Industrial Managed Ethernet Switches
Industrial managed switches benefit from the P3041NXN7NNC because they need a deterministic control-plane CPU plus a high-speed interconnect to manage 8-48 ports of Gigabit Ethernet and typically a few 10G uplinks. The three PCIe Gen2 controllers on the P3041 can attach to multiple external PHY/MAC devices, while the two SATA links allow an SSD for local logs, and the SEC engine accelerates MACsec encryption per port. The -40 to +105C temperature grade lets the same design serve substation, roadside, and factory-floor deployments without thermal derating. Used with an industrial-grade managed-switch BSP, the P3041 runs CLI, SNMP, NETCONF and Linux container workloads concurrently, in contrast to older PowerQUICC parts which lack virtualization and dedicated crypto.
推荐
Defense & Aerospace Networking
Defense and aerospace networking platforms favor the P3041NXN7NNC because the extended -40 to +105C temperature range, hardware virtualization, and SEC/PME engines meet MIL-STD-810G environmental and security requirements. Typical deployments include tactical routers, mission-computer networking modules, line-replaceable units (LRUs) on manned and unmanned platforms, and secure gateways for vehicle or shipboard networks. The flip-chip FCBGA package enables conduction-cooled assemblies and, when mated with conformal coating, supports the vibration and humidity profiles encountered in avionics bays. Software reuse is aided by NXP's support for INTEGRITY-178 tuMP and VxWorks 653 partitions on the e500mc platform, both of which leverage the same hardware hypervisor exposed by the P3041 silicon.
推荐
Wireless Base Station Baseband
Small-cell and enterprise small-cell base-station designs benefit from the P3041NXN7NNC because its four e500mc cores at 1.333 GHz can simultaneously process LTE PHY layers, run the L2/L3 protocol stack, and handle backhaul - previously requiring separate DSP plus CPU subsystems. The integrated SEC engine accelerates the encryption used in S1/X2 interfaces, and the SERDES-based SRIO and PCIe Gen2 lanes connect to a companion RFIC and to a fronthaul CPRI link. Operating temperature, vibration, and long-life support match the typical 10+ year carrier deployment window. Power consumption (in the 15 W class with all four cores at nominal load) fits passive-cooled outdoor small-cell enclosures.
推荐
Secure IoT and Industrial Gateways
Secure IoT and industrial gateways increasingly require edge analytics, protocol translation (Modbus/OPC-UA/MQTT), TLS/DTLS for cloud uplink, and a hardened Linux OS, all of which the P3041NXN7NNC delivers in a single SoC. The four cores split cleanly between MQTT broker, edge analytics (Node-RED or container workloads), cryptographic acceleration via the SEC engine, and real-time protocol handling, while the DDR3L controller keeps idle power low for fanless DIN-rail enclosures. Two SATA ports and PCIe connectivity accommodate local SSD or LTE/5G modem cards. Compared with a Raspberry-class ARM SoC, the P3041 brings deterministic ECC memory and hardware virtualization for isolation between IT and OT workloads.
推荐
Embedded SBC / Industrial HMI Controllers
Single-board computers (SBCs) and industrial HMI controllers used in factory automation need deterministic response, ECC memory, and long-life NXP silicon lifecycle support, all of which the P3041NXN7NNC provides. A typical SBC implements a Linux+Kiosk Chromium or Qt HMI on one core, a fieldbus master (EtherCAT/PROFINET) on another, and reserves remaining cores for motion and safety PLC functions. The PCIe lanes attach to GPU or touchscreen controllers, and the SATA ports connect to local SSD for recipe/event storage. Operating-temperature compatibility and BGA-level manufacturing robustness give the P3041 a clear lifecycle advantage over short-lived consumer ARM parts.
推荐
Network-Attached Storage (NAS) Controllers
The P3041NXN7NNC is well suited to mid-range NAS appliances because the two native SATA 2.0 ports can be expanded via PCIe-attached SATA/SAS controllers to 8-12 drive bays, while the four cores serve RAID scrubbing, SMB/NFS/iSCSI protocol daemons, and embedded snapshots. Compared with ARM-based NAS controllers, the P3041 brings ECC memory, hardware-assisted crypto for SMB3 encryption, and a TCO profile that aligns with 24/7 always-on storage products. The 1.333 GHz clock and 4 MB aggregate cache keep latency low even with mixed random workloads, and the extended temperature range allows deployment in non-datacenter server rooms.
推荐
推荐产品汇总
工程参考数据： P3041NXN7NNC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | P3041NXE7NNC | P3041E7NNC | P3041N7NNC | P4040NSE7MMC | P4080NSE7MMC |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 1295-FCBGA (37.5x37.5) | 1295-FCBGA (37.5x37.5) - same | 1295-FCBGA (37.5x37.5) - same | 1295-FCBGA (37.5x37.5) - same | 1295-FCBGA P4 family - same | 1295-FCBGA P4 family - same |
| Core Architecture | PowerPC e500mc | PowerPC e500mc (same) | PowerPC e500mc (same) | PowerPC e500mc (same) | PowerPC e500mc (same) | PowerPC e500mc (same) |
| Number of Cores | 4 | 4 | 4 | 4 | 8 | 8 |
| Core Frequency | 1.333 GHz | 1.333 GHz (same) | 1.333 GHz (same) | 1.333 GHz (same) | Up to 1.5 GHz | Up to 1.5 GHz |
| Memory Controller | DDR3/DDR3L, 1333 MT/s | DDR3/DDR3L (same) | DDR3/DDR3L (same) | DDR3/DDR3L (same) | DDR3/DDR3L (same) | DDR3/DDR3L (same) |
| Ethernet | 5x GbE + 1/10 GbE options | Same | Same | Same | Same + additional SerDes lanes | Same + additional SerDes lanes |
| Operating Temperature | -40C to +105C | -40C to +105C (same) | -40C to +85C | -40C to +105C | -40C to +105C | -40C to +105C |
| PCIe Controllers | 3 x PCIe Gen2 | 3 x PCIe Gen2 (same) | 3 x PCIe Gen2 (same) | 3 x PCIe Gen2 (same) | 3 x PCIe Gen2 + SerDes expansion | 3 x PCIe Gen2 + SerDes expansion |
| Series/Platform | QorIQ P3 | QorIQ P3 (same) | QorIQ P3 (same) | QorIQ P3 (same) | QorIQ P4 | QorIQ P4 |
关键差异点
- Drop-in industrial-grade same-package variant P3041NXE7NNC available for harsh environments （对比 P3041NXE7NNC)
- Drop-in upgrade path to 8-core P4 platform （对比 P4040NSE7MMC)
- Integrated SEC + PME hardware offload engines vs. bare MPU alternatives （对比 Lower-end ARM SoC NAS/IoT parts)
设计说明
Estimated: the 1295-pin FCBGA at 37.5 x 37.5 mm requires an 8-layer (minimum) PCB with 1 oz copper, microvia-in-pad construction for the BGA fan-out, and matched-length (within 25 mil) DDR3 traces to support 1333 MT/s operation. Reference NXP application note AN3944 for stack-up and routing guidance, and use the package land pattern exactly as published in the NXP IBIS/BGA land files. Failure to follow the recommended land pattern and escape routing is the single most common cause of BGA bring-up failures on the P3041.
Estimated: at full load (4 cores at 1.333 GHz, all SERDES lanes active), the P3041NXN7NNC consumes roughly 15 W; the FCBGA package requires either an integrated heat spreader with thermal-interface material or a forced-air solution to keep Tj below 105C across the industrial temperature range. Always validate with board-level thermal simulation (CFD or measured) and avoid placing heat sources directly above the FCBGA IHS; recommended airflow is at least 1.5 m/s for a 10C margin.
Do not assume all P3041 suffix variants share the same silicon revision; the NXE/NXN suffix encodes temperature grade and feature enablement, and the letters thereafter encode bit-revision. Mismatched silicon between board and BSP causes subtle SEC and PME hangs; check the NXP product change notice (PCN) database and reprogram your U-Boot device tree against the exact chip revision. Also note that the FCBGA package is not user-reworkable with hot air; design for test pads and a JTAG/COP header to enable board-level debug without BGA removal.
合规信息
RoHS compliant per JLCPCB and Mouser listings. AEC-Q100 is not applicable because P3041NXN7NNC is an industrial/extended-temperature MPU rather than an automotive-grade part. Halogen-free status not published by NXP for this SKU and is therefore marked unknown.
