P3041NXN7NNC - QorIQ P3 4-Core 1.333GHz SoC | NXP
Référence : P3041NXN7NNC ✓ ActifP3041NXN7NNC Présentation
A QorIQ communications processor is a class of multicore networking SoC originally developed by Freescale and now continued under NXP. It sits in the broader taxonomy of microprocessors -> embedded MPU -> multicore SoC -> communications processor, and functions as the central compute and I/O aggregation element in routers, switches, base stations, and industrial gateways that previously required an MPU plus multiple companion ASICs.
Key differentiating features of the P3041 include its heterogeneous hardware-blocks for packet processing (SEC security engine, PME pattern-matching engine), four integrated 10/100/1000 Mbps Ethernet MACs plus options for 1/10 GbE, two SATA controllers, three PCIe Gen2 controllers, and two Serial RapidIO ports. The platform supports up to 16 GB of DDR3/DDR3L with ECC at up to 1333 MT/s, and operating power is conservatively budgeted in the 15 W thermal envelope typical of the P3041 family.
Architecturally, the P3041 leverages a three-level cache (32 KB I/D L1 per core, 128 KB L2 per core, and a shared 1 MB CoreNet-coherent L3), interconnect via the CoreNet coherency fabric, and accelerates common networking primitives in dedicated engines rather than burning CPU cycles on them - yielding headroom for control-plane and Linux workloads alongside data-plane forwarding.
Typical applications include industrial control and HMI platforms, multi-service routers and managed switches, wireless base-station baseband, single-board computers and embedded Linux designs, secure gateways, and defense/aerospace networking equipment. The -40 to +105C temperature grade extends deployment to outdoor enclosures and vehicle telematics.
When designing in the P3041, plan for a multilayer (8+ layer) PCB with matched-impedance DDR3 routing, a robust power map (the part requires multiple voltage rails), and provision for a JTAG/COP debug header. The large 37.5 mm FCBGA package demands careful reflow profiling and bottom-side land inspection. NXP's CodeWarrior and the Linux SDK are the recommended software toolchains; third-party QorIQ BSPs (ELDK, Yocto layers) are also widely available.
This page consolidates distributor live-pricing, drop-in same-package alternatives, and design-side considerations beyond the manufacturer datasheet, helping sourcing engineers verify lifecycle risk and replacement options for the still-active QorIQ P3041 platform.
Alternatives de remplacement direct pour P3041NXN7NNC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec P3041NXN7NNC (même facteur de forme et même empreinte) — différant par Core Architecture, Core Frequency, Memory Controller, Mounting Type, Number of Cores.
P3041NXE7NNC
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P3041E7NNC
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
P3041N7NNC
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
P4040NSE7MMC
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →P4080NSE7MMC
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
P3041NXN7NNC Valeurs maximales et caractéristiques électriques
| Core Architecture | PowerPC e500mc, 32-bit |
| Number of Cores | 4 (quad-core) |
| Core Frequency | 1.333 GHz |
| Cache (L1) | 32 KB I + 32 KB D per core |
| Cache (L2) | 128 KB per core |
| Shared Cache (L3) | 1 MB (CoreNet coherent) |
| Memory Controller | DDR3 / DDR3L with ECC, up to 1333 MT/s |
| Ethernet | 10/100/1000 Mbps (5 ports); options for 1/10 GbE |
| PCIe | 3 x PCIe Gen2 controllers |
| SATA | 2 x SATA 2.0 |
| Serial RapidIO | 2 x lanes (per datasheet) |
| Security Engine | SEC 4.0 (cryptographic accelerator) |
| Pattern Matching Engine | Yes (PME) |
| Graphics Acceleration | No |
| Température de fonctionnement | -40C to +105C |
| Boîtier | 1295-pin FCBGA (FCPBGA), 37.5 x 37.5 mm |
| Type de montage | Surface Mount (BGA) |
| Statut RoHS | Compliant |
| Series | QorIQ P3 |
Guide de configuration des broches du P3041NXN7NNC 1295-pin fcbga (fcpbga), 37.5 x 37.5 mm
Configuration des broches du P3041NXN7NNC (boîtier 1295-pin fcbga (fcpbga), 37.5 x 37.5 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour P3041NXN7NNC.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
P3041NXN7NNC convient pour 7 applications: Multi-Service Routers, Industrial Managed Ethernet Switches, Defense & Aerospace Networking, Wireless Base Station Baseband, Secure IoT and Industrial Gateways, Embedded SBC / Industrial HMI Controllers, Network-Attached Storage (NAS) Controllers.
Multi-Service Routers
The P3041NXN7NNC is a natural fit for mid-range multi-service routers and edge routers because its four 1.333 GHz e500mc cores, the integrated SEC 4.0 security engine, the PME pattern-matching engine, and five 10/100/1000 Ethernet MACs (plus 1/10 GbE options) offload the data-plane and crypto workloads that would otherwise saturate a general-purpose CPU. Placed at the heart of a router mainboard alongside a DDR3-1333 SODIMM and a managed Ethernet PHY, it sustains IPsec tunnel throughput while leaving CPU headroom for routing daemons, NETCONF/YANG agents and telemetry collectors. Compared with separate MPU-plus-ASIC designs, the P3041 cuts board area and BOM by eliminating a forwarding engine, and its -40 to +105C grade lets the same platform be deployed in outdoor telecom cabinets.
Recommandé
Industrial Managed Ethernet Switches
Industrial managed switches benefit from the P3041NXN7NNC because they need a deterministic control-plane CPU plus a high-speed interconnect to manage 8-48 ports of Gigabit Ethernet and typically a few 10G uplinks. The three PCIe Gen2 controllers on the P3041 can attach to multiple external PHY/MAC devices, while the two SATA links allow an SSD for local logs, and the SEC engine accelerates MACsec encryption per port. The -40 to +105C temperature grade lets the same design serve substation, roadside, and factory-floor deployments without thermal derating. Used with an industrial-grade managed-switch BSP, the P3041 runs CLI, SNMP, NETCONF and Linux container workloads concurrently, in contrast to older PowerQUICC parts which lack virtualization and dedicated crypto.
Recommandé
Defense & Aerospace Networking
Defense and aerospace networking platforms favor the P3041NXN7NNC because the extended -40 to +105C temperature range, hardware virtualization, and SEC/PME engines meet MIL-STD-810G environmental and security requirements. Typical deployments include tactical routers, mission-computer networking modules, line-replaceable units (LRUs) on manned and unmanned platforms, and secure gateways for vehicle or shipboard networks. The flip-chip FCBGA package enables conduction-cooled assemblies and, when mated with conformal coating, supports the vibration and humidity profiles encountered in avionics bays. Software reuse is aided by NXP's support for INTEGRITY-178 tuMP and VxWorks 653 partitions on the e500mc platform, both of which leverage the same hardware hypervisor exposed by the P3041 silicon.
Recommandé
Wireless Base Station Baseband
Small-cell and enterprise small-cell base-station designs benefit from the P3041NXN7NNC because its four e500mc cores at 1.333 GHz can simultaneously process LTE PHY layers, run the L2/L3 protocol stack, and handle backhaul - previously requiring separate DSP plus CPU subsystems. The integrated SEC engine accelerates the encryption used in S1/X2 interfaces, and the SERDES-based SRIO and PCIe Gen2 lanes connect to a companion RFIC and to a fronthaul CPRI link. Operating temperature, vibration, and long-life support match the typical 10+ year carrier deployment window. Power consumption (in the 15 W class with all four cores at nominal load) fits passive-cooled outdoor small-cell enclosures.
Recommandé
Secure IoT and Industrial Gateways
Secure IoT and industrial gateways increasingly require edge analytics, protocol translation (Modbus/OPC-UA/MQTT), TLS/DTLS for cloud uplink, and a hardened Linux OS, all of which the P3041NXN7NNC delivers in a single SoC. The four cores split cleanly between MQTT broker, edge analytics (Node-RED or container workloads), cryptographic acceleration via the SEC engine, and real-time protocol handling, while the DDR3L controller keeps idle power low for fanless DIN-rail enclosures. Two SATA ports and PCIe connectivity accommodate local SSD or LTE/5G modem cards. Compared with a Raspberry-class ARM SoC, the P3041 brings deterministic ECC memory and hardware virtualization for isolation between IT and OT workloads.
Recommandé
Embedded SBC / Industrial HMI Controllers
Single-board computers (SBCs) and industrial HMI controllers used in factory automation need deterministic response, ECC memory, and long-life NXP silicon lifecycle support, all of which the P3041NXN7NNC provides. A typical SBC implements a Linux+Kiosk Chromium or Qt HMI on one core, a fieldbus master (EtherCAT/PROFINET) on another, and reserves remaining cores for motion and safety PLC functions. The PCIe lanes attach to GPU or touchscreen controllers, and the SATA ports connect to local SSD for recipe/event storage. Operating-temperature compatibility and BGA-level manufacturing robustness give the P3041 a clear lifecycle advantage over short-lived consumer ARM parts.
Recommandé
Network-Attached Storage (NAS) Controllers
The P3041NXN7NNC is well suited to mid-range NAS appliances because the two native SATA 2.0 ports can be expanded via PCIe-attached SATA/SAS controllers to 8-12 drive bays, while the four cores serve RAID scrubbing, SMB/NFS/iSCSI protocol daemons, and embedded snapshots. Compared with ARM-based NAS controllers, the P3041 brings ECC memory, hardware-assisted crypto for SMB3 encryption, and a TCO profile that aligns with 24/7 always-on storage products. The 1.333 GHz clock and 4 MB aggregate cache keep latency low even with mixed random workloads, and the extended temperature range allows deployment in non-datacenter server rooms.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour P3041NXN7NNC — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | P3041NXE7NNC | P3041E7NNC | P3041N7NNC | P4040NSE7MMC | P4080NSE7MMC |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 1295-FCBGA (37.5x37.5) | 1295-FCBGA (37.5x37.5) - same | 1295-FCBGA (37.5x37.5) - same | 1295-FCBGA (37.5x37.5) - same | 1295-FCBGA P4 family - same | 1295-FCBGA P4 family - same |
| Core Architecture | PowerPC e500mc | PowerPC e500mc (same) | PowerPC e500mc (same) | PowerPC e500mc (same) | PowerPC e500mc (same) | PowerPC e500mc (same) |
| Number of Cores | 4 | 4 | 4 | 4 | 8 | 8 |
| Core Frequency | 1.333 GHz | 1.333 GHz (same) | 1.333 GHz (same) | 1.333 GHz (same) | Up to 1.5 GHz | Up to 1.5 GHz |
| Memory Controller | DDR3/DDR3L, 1333 MT/s | DDR3/DDR3L (same) | DDR3/DDR3L (same) | DDR3/DDR3L (same) | DDR3/DDR3L (same) | DDR3/DDR3L (same) |
| Ethernet | 5x GbE + 1/10 GbE options | Same | Same | Same | Same + additional SerDes lanes | Same + additional SerDes lanes |
| Operating Temperature | -40C to +105C | -40C to +105C (same) | -40C to +85C | -40C to +105C | -40C to +105C | -40C to +105C |
| PCIe Controllers | 3 x PCIe Gen2 | 3 x PCIe Gen2 (same) | 3 x PCIe Gen2 (same) | 3 x PCIe Gen2 (same) | 3 x PCIe Gen2 + SerDes expansion | 3 x PCIe Gen2 + SerDes expansion |
| Series/Platform | QorIQ P3 | QorIQ P3 (same) | QorIQ P3 (same) | QorIQ P3 (same) | QorIQ P4 | QorIQ P4 |
Principaux différenciateurs
- Drop-in industrial-grade same-package variant P3041NXE7NNC available for harsh environments (vs P3041NXE7NNC)
- Drop-in upgrade path to 8-core P4 platform (vs P4040NSE7MMC)
- Integrated SEC + PME hardware offload engines vs. bare MPU alternatives (vs Lower-end ARM SoC NAS/IoT parts)
Notes de conception
Estimated: the 1295-pin FCBGA at 37.5 x 37.5 mm requires an 8-layer (minimum) PCB with 1 oz copper, microvia-in-pad construction for the BGA fan-out, and matched-length (within 25 mil) DDR3 traces to support 1333 MT/s operation. Reference NXP application note AN3944 for stack-up and routing guidance, and use the package land pattern exactly as published in the NXP IBIS/BGA land files. Failure to follow the recommended land pattern and escape routing is the single most common cause of BGA bring-up failures on the P3041.
Estimated: at full load (4 cores at 1.333 GHz, all SERDES lanes active), the P3041NXN7NNC consumes roughly 15 W; the FCBGA package requires either an integrated heat spreader with thermal-interface material or a forced-air solution to keep Tj below 105C across the industrial temperature range. Always validate with board-level thermal simulation (CFD or measured) and avoid placing heat sources directly above the FCBGA IHS; recommended airflow is at least 1.5 m/s for a 10C margin.
Do not assume all P3041 suffix variants share the same silicon revision; the NXE/NXN suffix encodes temperature grade and feature enablement, and the letters thereafter encode bit-revision. Mismatched silicon between board and BSP causes subtle SEC and PME hangs; check the NXP product change notice (PCN) database and reprogram your U-Boot device tree against the exact chip revision. Also note that the FCBGA package is not user-reworkable with hot air; design for test pads and a JTAG/COP header to enable board-level debug without BGA removal.
Informations de conformité
RoHS compliant per JLCPCB and Mouser listings. AEC-Q100 is not applicable because P3041NXN7NNC is an industrial/extended-temperature MPU rather than an automotive-grade part. Halogen-free status not published by NXP for this SKU and is therefore marked unknown.
