P5010NSN1MMB - QorIQ P5 e5500 2.0GHz 64-bit MPU | NXP Semiconductors
料号： P5010NSN1MMB ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $270 | $2,700.00 |
| 100 | $248 | $24,800.00 |
| 500 | $225 | $112,500.00 |
| 1,000 | $205 | $205,000.00 |
P5010NSN1MMB 概述
A microprocessor (MPU) is an integrated circuit that contains one or more central processing units implemented as a single silicon die, designed to fetch, decode, and execute general-purpose instructions while orchestrating peripherals over bus fabrics and memory controllers. MPUs occupy the top of the embedded compute hierarchy (microprocessor -> MPU/SoC -> embedded processor -> communication processor), and QorIQ P5 devices in particular target enterprise and carrier-grade workloads where 64-bit address-space performance, hardware packet acceleration, and extended operating-temperature envelopes matter far more than instruction-level power efficiency.
Key differentiating characteristics of the P5010NSN1MMB include the e5500 64-bit dual-issue superscalar Power architecture core, integrated high-bandwidth memory and I/O controllers, on-chip SerDes lanes for backplane interfaces, and 2.0 GHz maximum operating frequency. The 1295-ball FCPBGA exposes the full DDR controller, multiple Ethernet MACs, PCIe lanes, and other high-speed serial interfaces needed to drop into a top-of-rack switch, radio-network controller, or secure industrial gateway without external protocol bridges.
Application fit includes Layer 2/3 enterprise switches, router control planes, secure VPN/IPsec gateways, industrial automation controllers, and defense embedded compute modules. When designing with this part, special attention must be paid to PCB stack-up for the FCPBGA, thermal dissipation, and power-rail sequencing - the e5500 core will not tolerate spec-violating supply ramps. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical sourcing notes not collected in one place in the NXP product brief.
直接替换替代料： P5010NSN1MMB ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： P5010NSN1MMB （相同外形与封装尺寸） ——差异在于 Data Bus Width, Hardware Acceleration, Manufacturer, Memory Controller, Mounting Type.
快速对比工具——选择替代料号进行并排对比：
P5010NSN1MMB
✅ 直接替换✓ 有现货
$205 / 个
查看数据手册 →P5020NSN1MMB
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
P5040NSN1MMB
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
P5010NSN1MMBA
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
P5010NSN1QGB
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
P5010NSN1MMB 最大额定值与电气特性
| Manufacturer | NXP Semiconductors (Freescale legacy) |
| Series | QorIQ P5 |
| Core Architecture | PowerPC e5500 |
| Number of Cores | 1 |
| 数据总线宽度 | 64 bit |
| 最大时钟频率 | 2.0 GHz |
| Package Type | 1295-FCPBGA (Flip-Chip Plastic BGA) |
| Package Size | 37.5 mm × 37.5 mm |
| 安装类型 | Surface Mount |
| Core Voltage Min | 0.95 V |
| RoHS 状态 | Compliant |
| Part Status | Active (per distributor listing, as of 2026-10-17) |
P5010NSN1MMB 37.5 mm × 37.5 mm 引脚配置指南
P5010NSN1MMB（37.5 mm × 37.5 mm 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： P5010NSN1MMB.
请参阅 数据手册 以查看完整引脚配置。
典型应用
P5010NSN1MMB 适用于 6 应用s: Enterprise Layer 2/3 Switch Control Plane, Industrial Automation Controller (PLC/RTU), Carrier-Grade Secure Gateway / VPN Appliance, Defense/Aerospace Embedded Compute (Rugged SBC), Wireless Base Station Control Board (4G/5G RRH), Medical Imaging Console / Edge Diagnostic.
Enterprise Layer 2/3 Switch Control Plane
The NXP P5010NSN1MMB is well suited to the control-plane CPU role inside enterprise Layer 2/3 managed switches. Its single e5500 core running at 2.0 GHz delivers deterministic 64-bit performance for routing protocols (OSPF, BGP, RIP), VLAN management, and ACL table updates, while the integrated Gigabit Ethernet MACs and PCIe lanes attach directly to the switch fabric PHY without external bridges. Designers drop the part onto a multi-layer FR-4 board with matched-impedance SerDes routing; unlike a discrete NPU plus external CPU solution it consolidates the control plane into a single ball-grid BGA and reduces BOM by 4-6 supporting ICs.
推荐
Industrial Automation Controller (PLC/RTU)
Inside a programmable logic controller or remote terminal unit, the P5010NSN1MMB handles IEC 61131-3 logic execution, deterministic Ethernet traffic, and on-board serial/protocol conversion. The e5500 64-bit ISA executes complex motion-control algorithms without timing slips, and the DDR3 controller with ECC corrects single-bit memory faults common in harsh industrial environments. The extended -40 °C to +105 °C junction range allows deployment in factory cabinets without additional thermal conditioning. The 1295-ball FCPBGA also exposes native PCIe lanes for camera and fieldbus expansion modules, eliminating the need for a separate industrial PCIe bridge.
推荐
Carrier-Grade Secure Gateway / VPN Appliance
The P5010NSN1MMB's on-chip SEC crypto engine accelerates AES-256, IPsec, TLS, and SSH handshakes to line rate, eliminating the need for an external crypto co-processor in software-defined VPN appliances. Its 64-bit address space can address up to 16 GB of DDR3 with ECC, enough for very large connection-state tables in carrier-grade firewalls. The 2.0 GHz core sustains full 1 Gbps IPsec throughput with stateful inspection - a measurable benefit versus older P2020-based designs that maxed out around 600 Mbps. Compared to a switcher-based solution, the e5500 keeps deterministic latency under heavy packet load.
推荐
Defense/Aerospace Embedded Compute (Rugged SBC)
Single-board computers designed for defense and aerospace subsystems (radar front-end processing, electronic-countermeasure compute nodes, UAV payloads) rely on the P5010NSN1MMB because the e5500 64-bit PowerPC core remains supported in NXP's long-life embedded roadmap and tolerates the shock/vibration profile of MIL-STD-810. Its 1295-FCPBGA package supports large multilayer PCBs with controlled-impedance routing for backplane attachments, and its operating range covers the military thermal envelope. With a deterministic interrupt architecture and SEU-resistant L2 cache (when ECC is enabled), the P5010 outperforms ARM Cortex-R variants on raw packet-processing throughput per watt.
推荐
Wireless Base Station Control Board (4G/5G RRH)
In Remote Radio Head (RRH) and small-cell base stations, the P5010NSN1MMB serves as the baseband compute engine supervising CPRI/eCPRI links to the central unit. The integrated Ethernet MACs drive fiber backhaul directly when paired with an SFP cage, and the DDR3 controller with ECC protects baseband buffers from single-event upsets. Operating at 2.0 GHz, it sustains full CPRI option 7 throughput for LTE and 5G NR fronthaul, with headroom for Layer 2 packet scheduling. Compared with discrete DSP + CPU solutions it cuts board area by ~40% and reduces BOM cost by 3-5 parts.
推荐
Medical Imaging Console / Edge Diagnostic
Although not the highest-volume market for the P5010NSN1MMB, the device fits medical imaging consoles and edge diagnostic instruments where deterministic compute matters more than low power. Its 64-bit e5500 enables real-time ultrasound beamforming, MRI gradient control loops, and embedded DICOM processing at low latency. The ECC-protected DDR3 controller mitigates patient-safety risks from single-bit memory errors, and the operating-temperature range accommodates the warm enclosures of imaging suites. For lower-cost portable diagnostic monitors, however, a Cortex-A based solution typically wins on power, so scope the P5010 to fixed-installation imaging systems only.
推荐
推荐产品汇总
工程参考数据： P5010NSN1MMB ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | P5010NSN1MMB | P5020NSN1MMB | P5040NSN1MMB | P5010NSN1MMBA | P5010NSN1QGB |
|---|---|---|---|---|---|---|
| Package | 1295-FCPBGA (37.5x37.5) | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA family - same mechanical footprint | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | PowerPC e5500 (1 core) | PowerPC e5500 (1 core) | PowerPC e5500 (2 cores) | PowerPC e5500 (4 cores) | PowerPC e5500 (1 core) | PowerPC e5500 (1 core) |
| Architecture | 64 bit | 64 bit | 64 bit | 64 bit | 64 bit | 64 bit |
| Max Clock Frequency | 2.0 GHz | 2.0 GHz | 2.0 GHz | 1.8 GHz (quad-core) | 2.0 GHz | 2.0 GHz |
| Core Voltage (Min) | 0.95 V | 0.95 V | 0.95 V | 0.95 V | 0.95 V | 0.95 V |
| Series / Platform | QorIQ P5 | QorIQ P5 | QorIQ P5 | QorIQ P5 | QorIQ P5 | QorIQ P5 |
| Cryptography Engine (SEC) | Yes (on-chip SEC) | Yes | Yes | Yes (enhanced) | Yes | Yes |
关键差异点
- Single highest-frequency single-core e5500 in stock （对比 P2020NSN1MMB)
- Pin-compatible same-family upgrade path （对比 P5020NSN1MMB)
- RoHS and lead-free FCPBGA reflow compatibility （对比 Generic industrial MPU in leaded package)
设计说明
Estimated: BGA escape routing demands a 14-layer minimum stack-up with micro-vias under the 1295-ball FCPBGA fan-out. Use a controlled-impedance core of 0.5 oz copper and dielectric thickness tuned for 100 Ohm differential SerDes. BGA pad finishes are ENIG; reflow profile follows JEDEC J-STD-020 MSL3 with peak at 245 °C for 30 s. Single-event solder-ball voids greater than 25% of the ball diameter will fail inspection.
The QorIQ P5 at 2.0 GHz can dissipate 8-12 W under sustained packet-processing load. Apply a thermal resistance budget of theta_JA ≤ 1.5 °C/W to a heatsink + forced-air combination. Use a thermal interface material with conductivity ≥ 3 W/m-K and verify with a calibrated IR camera at full utilisation; derate at the corners versus centre of the BGA.
The P5010NSN1MMB requires a sequenced core (0.95 V) and GVDD/AVDD rails with a 1 ms+ delay; an out-of-order ramp risks latch-up. Use a true 8-phase buck converter with current-sharing inductors and a TPS3823-style supervisor to assert POR before firmware release. Add 22 µF X7R bulk plus 0.1 µF X5R decoupling within 5 mm of each rail cluster to support worst-case load transients of 8 A/µs.
Do not reuse bare-board designs from P2020 (older QorIQ P1) without verifying pin compatibility - the P5 series reassigned several DDR3 balls and SerDes lanes. Always cross-check the latest NXP pin-list revision against the schematic before going to layout. Also confirm JTAG boundary-scan chain order, since drop-in P5020/P5040 substitutes change the TAP chain length and break legacy test fixtures.
合规信息
RoHS / REACH compliance indicated by NXP Freescale legacy product page; AEC-Q100 not applicable for non-automotive-grade MPU. Confirm full material declaration with NXP before medical/automotive integration.
