P5020NXE7VNB - QorIQ P5 2-Core 2.0GHz PowerPC MPU | NXP
料号： P5020NXE7VNB ⚠ 最后一次采购| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $451.4 | $451.40 |
| 10 | $428.83 | $4,288.30 |
| 50 | $406.26 | $20,313.00 |
| 100 | $383.69 | $38,369.00 |
| 500 | $361.12 | $180,560.00 |
P5020NXE7VNB 概述
A microprocessor (MPU) is a single-chip CPU that integrates core processing logic, memory controllers, and I/O peripherals onto one silicon die, forming the central compute element of an embedded system. In the broader IC taxonomy, an MPU is a subset of microcontrollers and SoCs (System-on-Chip) when it integrates more than the CPU core itself; the QorIQ P5 family specifically targets high-performance networking, where deterministic throughput, hardware offload engines, and multi-protocol I/O are required alongside general-purpose compute.
Key features of the P5020NXE7VNB include dual PowerPC e5500 cores at 2.0 GHz, an SEC 4.2 cryptographic accelerator, integrated DDR3/DDR3L controllers with ECC support, three PCI Express controllers, multiple Gigabit Ethernet interfaces with classification and queuing, two Serial RapidIO ports, and a Data Path Acceleration Architecture (DPAA) for packet processing. The 1295-ball FCPBGA exposes the full peripheral set and supports high-speed SERDES lanes at multi-gigabit data rates, enabling line-rate processing at 10 Gbps and beyond when paired with external PHYs.
Architecturally, the P5020NXE7VNB uses a hierarchical interconnect with coherency between the two e5500 cores and a shared platform cache, allowing efficient symmetric multiprocessing. The 45 nm CMOS process and integrated voltage regulation reduce external component count while the SEC 4.2 block accelerates IPsec, SSL/TLS, and 3GPP algorithms without burdening the cores, which is essential when the device handles encrypted traffic at line rate.
Typical applications include enterprise routers and switches, LTE/WCDMA baseband controllers, network-attached storage (NAS), industrial gateways, secure VPN appliances, and aerospace/defense communications. The -40C to +105C industrial temperature grade allows deployment in outdoor base stations, ruggedized military systems, and industrial control cabinets where commercial-grade parts would be unreliable.
When designing with the P5020NXE7VNB, pay particular attention to power-rail sequencing and thermal management - the 1295-ball FCPBGA has a significant thermal envelope under peak load, and a multilayer PCB with dedicated power and ground planes plus a heatsink is mandatory for sustained 2.0 GHz dual-core operation.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.
直接替换替代料： P5020NXE7VNB ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： P5020NXE7VNB （相同外形与封装尺寸） ——差异在于 Hardware Acceleration, Number of Cores, Package, Core Architecture, Ethernet.
快速对比工具——选择替代料号进行并排对比：
P5020NXN7VNB
✅ 直接替换📋 参考替代料（不在目录中）
P5020NXE7VNB 最大额定值与电气特性
| Series | QorIQ P5 |
| Core Processor | PowerPC e5500 |
| Number of Cores | 2 |
| Bus Width | 64-bit |
| Core Frequency | 2.0 GHz |
| Co-Processors / DSP | Security; SEC 4.2 |
| RAM Controllers | DDR3, DDR3L |
| Graphics Acceleration | No |
| Ethernet | Multiple Gigabit Ethernet interfaces |
| PCIe Controllers | 3 x PCIe |
| Serial RapidIO | Yes (SRIO) |
| 封装 | 1295-ball FCPBGA (37.5x37.5 mm) |
| Process Technology | 45 nm CMOS |
| 工作温度 | -40C to +105C |
| Hardware Acceleration | Data Path Acceleration Architecture (DPAA), pattern matching |
| Cryptographic Acceleration | SEC 4.2 (IPsec, SSL/TLS, 3GPP) |
P5020NXE7VNB 1295-ball fcpbga (37.5x37.5 mm) 引脚配置指南
P5020NXE7VNB（1295-ball fcpbga (37.5x37.5 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： P5020NXE7VNB.
请参阅 数据手册 以查看完整引脚配置。
典型应用
P5020NXE7VNB 适用于 6 应用s: Enterprise Router / Switch, LTE / WCDMA Baseband Controller, Network-Attached Storage (NAS) Controller, Industrial Secure Gateway / VPN Appliance, Aerospace / Defense Communications, Test & Measurement Instrumentation.
Enterprise Router / Switch
The P5020NXE7VNB fits enterprise router and L2/L3 switch designs because its dual 2.0 GHz e5500 cores combined with DPAA packet processing deliver line-rate throughput on multi-Gigabit Ethernet uplinks. The integrated SEC 4.2 accelerator terminates IPsec tunnels without burdening the cores, while three PCIe lanes attach crypto offload cards or external PHYs. Power sequencing and a multi-layer PCB with dedicated ground planes are required.
推荐
LTE / WCDMA Baseband Controller
The P5020NXE7VNB is well-suited to small-cell and macro baseband applications where dual 64-bit cores at 2.0 GHz run PHY and MAC layers concurrently. The SEC 4.2 block accelerates 3GPP cipher suites (Kasumi, Snow3G, ZUC) for air-interface encryption, while SRIO links to a baseband FPGA. Industrial -40C to +105C temperature rating supports outdoor radio units and tower-top deployments.
推荐
Network-Attached Storage (NAS) Controller
The dual-core e5500 architecture at 2.0 GHz provides the throughput required for NAS controllers managing RAID volumes and SMB/NFS/iSCSI traffic. DDR3/DDR3L controllers with ECC support reliable storage operation, and the Gigabit Ethernet MACs plus PCIe lanes accommodate multiple 1 GbE or 10 GbE NICs. The 1295-ball FCPBGA simplifies board layout by integrating PHYs and SERDES.
推荐
Industrial Secure Gateway / VPN Appliance
In industrial VPN gateway designs the P5020NXE7VNB processes encrypted tunnels at line rate via SEC 4.2 IPsec/SSL acceleration, while the dual e5500 cores handle routing and firewall policies. Industrial -40C to +105C operation supports deployment in unconditioned control cabinets and outdoor enclosures. Multiple Gigabit Ethernet MACs and PCIe expansion enable cellular modems and Wi-Fi controllers.
推荐
Aerospace / Defense Communications
The P5020NXE7VNB serves in ruggedized military communications where its industrial temperature range, ECC memory support, and hardware-accelerated crypto meet MIL-grade reliability requirements. SRIO ports link to DSPs and FPGAs in software-defined radio architectures, while the dual cores run waveform processing and protocol stacks concurrently. Extended-lifecycle availability is critical for defense programs.
推荐
Test & Measurement Instrumentation
High-end network test equipment benefits from the P5020NXE7VNB's dual 2.0 GHz cores plus DPAA pattern matching for traffic generation at wire speed. PCIe lanes capture analyzer cards at multi-gigabit rates, and SRIO interconnects multiple analyzer modules in a chassis. DDR3 with ECC preserves measurement integrity under sustained full-line-rate load.
推荐
推荐产品汇总
工程参考数据： P5020NXE7VNB ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | P5020NXN7VNB |
|---|---|---|
| Package | 1295-ball FCPBGA (37.5x37.5 mm) | 1295-ball FCPBGA (37.5x37.5 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors - same |
| Core Processor | PowerPC e5500 | PowerPC e5500 - same |
| Number of Cores | 2 | 2 - same |
| Bus Width | 64-bit | 64-bit - same |
| Core Frequency | 2.0 GHz | 2.0 GHz - same |
| Security Accelerator | SEC 4.2 | SEC 4.2 - same |
| Memory Controllers | DDR3, DDR3L | DDR3, DDR3L - same |
| Operating Temperature | -40C to +105C | -40C to +105C - same |
关键差异点
- Industrial -40C to +105C operating temperature range （对比 Commercial-grade QorIQ P3 variants)
- Integrated SEC 4.2 cryptographic accelerator （对比 QorIQ P5020 variants without SEC)
- Dual-core 64-bit e5500 at 2.0 GHz with coherency （对比 Single-core QorIQ P1 family)
设计说明
The 1295-ball FCPBGA dissipates substantial heat under dual-core 2.0 GHz load with all SERDES lanes active. A multi-layer PCB with continuous power and ground planes plus a heatsink attached via thermal interface material is mandatory for sustained operation. Junction-to-ambient thermal resistance should be characterized at the worst-case workload before production release.
Power-rail sequencing must follow the QorIQ P5 reference manual - core voltage, platform voltage, and SERDES supplies must ramp in the prescribed order to avoid latch-up. Use a power-management IC that supports the P5020 sequence rather than discrete regulators. Decoupling requires bulk, mid-range, and high-frequency capacitors placed adjacent to each supply ball.
High-speed SERDES lanes (PCIe, SRIO, SATA, XAUI) require 100-ohm differential impedance with length matching per lane within the tolerance specified in the reference manual. Use 4 to 8 layer stack-up with dedicated ground reference planes beneath each SERDES pair, and avoid routing signals across plane splits which causes impedance discontinuities and EMI.
Do not populate the P5020NXE7VNB on a board designed for a QorIQ P3 or P4 family - although some package variants are footprint-compatible, the boot ROM, power sequencing, and SERDES pin-out differ. Always verify against the specific P5020 datasheet and design checklist, and design for the SEC 4.2 firmware load path required for production deployment.
DDR3/DDR3L memory routing requires matched-length byte lanes with 50-ohm single-ended impedance, and the address/command traces must be routed on a separate layer with reference to a ground plane. Place the DDR3 termination VTT regulator close to the DIMM or memory devices to minimize parasitic inductance, and follow the QorIQ P5 DDR3 design guide for fly-by or T-branch topology selection.
合规信息
RoHS, REACH, lead-free, and halogen-free status not present in the verified web data; set to unknown per data-authenticity rules. AEC-Q100 not applicable - the P5020NXE7VNB is a networking MPU, not an automotive-grade IC.
