P5020NXE7VNB - QorIQ P5 2-Core 2.0GHz PowerPC MPU | NXP
部品番号: P5020NXE7VNB ⚠ ラストタイムバイ| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $451.4 | $451.40 |
| 10 | $428.83 | $4,288.30 |
| 50 | $406.26 | $20,313.00 |
| 100 | $383.69 | $38,369.00 |
| 500 | $361.12 | $180,560.00 |
P5020NXE7VNB 概要
A microprocessor (MPU) is a single-chip CPU that integrates core processing logic, memory controllers, and I/O peripherals onto one silicon die, forming the central compute element of an embedded system. In the broader IC taxonomy, an MPU is a subset of microcontrollers and SoCs (System-on-Chip) when it integrates more than the CPU core itself; the QorIQ P5 family specifically targets high-performance networking, where deterministic throughput, hardware offload engines, and multi-protocol I/O are required alongside general-purpose compute.
Key features of the P5020NXE7VNB include dual PowerPC e5500 cores at 2.0 GHz, an SEC 4.2 cryptographic accelerator, integrated DDR3/DDR3L controllers with ECC support, three PCI Express controllers, multiple Gigabit Ethernet interfaces with classification and queuing, two Serial RapidIO ports, and a Data Path Acceleration Architecture (DPAA) for packet processing. The 1295-ball FCPBGA exposes the full peripheral set and supports high-speed SERDES lanes at multi-gigabit data rates, enabling line-rate processing at 10 Gbps and beyond when paired with external PHYs.
Architecturally, the P5020NXE7VNB uses a hierarchical interconnect with coherency between the two e5500 cores and a shared platform cache, allowing efficient symmetric multiprocessing. The 45 nm CMOS process and integrated voltage regulation reduce external component count while the SEC 4.2 block accelerates IPsec, SSL/TLS, and 3GPP algorithms without burdening the cores, which is essential when the device handles encrypted traffic at line rate.
Typical applications include enterprise routers and switches, LTE/WCDMA baseband controllers, network-attached storage (NAS), industrial gateways, secure VPN appliances, and aerospace/defense communications. The -40C to +105C industrial temperature grade allows deployment in outdoor base stations, ruggedized military systems, and industrial control cabinets where commercial-grade parts would be unreliable.
When designing with the P5020NXE7VNB, pay particular attention to power-rail sequencing and thermal management - the 1295-ball FCPBGA has a significant thermal envelope under peak load, and a multilayer PCB with dedicated power and ground planes plus a heatsink is mandatory for sustained 2.0 GHz dual-core operation.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.
ドロップイン代替品: P5020NXE7VNB — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: P5020NXE7VNB （同一形状・フットプリント） — 相違点: Hardware Acceleration, Number of Cores, Package, Core Architecture, Ethernet.
クイック比較ツール — 並列比較する代替部品を選択:
P5020NXN7VNB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P5020NXE7VNB 最大定格＆電気的特性
| Series | QorIQ P5 |
| Core Processor | PowerPC e5500 |
| Number of Cores | 2 |
| Bus Width | 64-bit |
| Core Frequency | 2.0 GHz |
| Co-Processors / DSP | Security; SEC 4.2 |
| RAM Controllers | DDR3, DDR3L |
| Graphics Acceleration | No |
| Ethernet | Multiple Gigabit Ethernet interfaces |
| PCIe Controllers | 3 x PCIe |
| Serial RapidIO | Yes (SRIO) |
| パッケージ | 1295-ball FCPBGA (37.5x37.5 mm) |
| Process Technology | 45 nm CMOS |
| 動作温度 | -40C to +105C |
| Hardware Acceleration | Data Path Acceleration Architecture (DPAA), pattern matching |
| Cryptographic Acceleration | SEC 4.2 (IPsec, SSL/TLS, 3GPP) |
P5020NXE7VNB 1295-ball fcpbga (37.5x37.5 mm) ピン配置ガイド
P5020NXE7VNB (1295-ball fcpbga (37.5x37.5 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: P5020NXE7VNB.
詳細は データシート をご参照ください。
主な用途
P5020NXE7VNB の用途: 6 件s: Enterprise Router / Switch, LTE / WCDMA Baseband Controller, Network-Attached Storage (NAS) Controller, Industrial Secure Gateway / VPN Appliance, Aerospace / Defense Communications, Test & Measurement Instrumentation.
Enterprise Router / Switch
The P5020NXE7VNB fits enterprise router and L2/L3 switch designs because its dual 2.0 GHz e5500 cores combined with DPAA packet processing deliver line-rate throughput on multi-Gigabit Ethernet uplinks. The integrated SEC 4.2 accelerator terminates IPsec tunnels without burdening the cores, while three PCIe lanes attach crypto offload cards or external PHYs. Power sequencing and a multi-layer PCB with dedicated ground planes are required.
おすすめ
LTE / WCDMA Baseband Controller
The P5020NXE7VNB is well-suited to small-cell and macro baseband applications where dual 64-bit cores at 2.0 GHz run PHY and MAC layers concurrently. The SEC 4.2 block accelerates 3GPP cipher suites (Kasumi, Snow3G, ZUC) for air-interface encryption, while SRIO links to a baseband FPGA. Industrial -40C to +105C temperature rating supports outdoor radio units and tower-top deployments.
おすすめ
Network-Attached Storage (NAS) Controller
The dual-core e5500 architecture at 2.0 GHz provides the throughput required for NAS controllers managing RAID volumes and SMB/NFS/iSCSI traffic. DDR3/DDR3L controllers with ECC support reliable storage operation, and the Gigabit Ethernet MACs plus PCIe lanes accommodate multiple 1 GbE or 10 GbE NICs. The 1295-ball FCPBGA simplifies board layout by integrating PHYs and SERDES.
おすすめ
Industrial Secure Gateway / VPN Appliance
In industrial VPN gateway designs the P5020NXE7VNB processes encrypted tunnels at line rate via SEC 4.2 IPsec/SSL acceleration, while the dual e5500 cores handle routing and firewall policies. Industrial -40C to +105C operation supports deployment in unconditioned control cabinets and outdoor enclosures. Multiple Gigabit Ethernet MACs and PCIe expansion enable cellular modems and Wi-Fi controllers.
おすすめ
Aerospace / Defense Communications
The P5020NXE7VNB serves in ruggedized military communications where its industrial temperature range, ECC memory support, and hardware-accelerated crypto meet MIL-grade reliability requirements. SRIO ports link to DSPs and FPGAs in software-defined radio architectures, while the dual cores run waveform processing and protocol stacks concurrently. Extended-lifecycle availability is critical for defense programs.
おすすめ
Test & Measurement Instrumentation
High-end network test equipment benefits from the P5020NXE7VNB's dual 2.0 GHz cores plus DPAA pattern matching for traffic generation at wire speed. PCIe lanes capture analyzer cards at multi-gigabit rates, and SRIO interconnects multiple analyzer modules in a chassis. DDR3 with ECC preserves measurement integrity under sustained full-line-rate load.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: P5020NXE7VNB — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | P5020NXN7VNB |
|---|---|---|
| Package | 1295-ball FCPBGA (37.5x37.5 mm) | 1295-ball FCPBGA (37.5x37.5 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors - same |
| Core Processor | PowerPC e5500 | PowerPC e5500 - same |
| Number of Cores | 2 | 2 - same |
| Bus Width | 64-bit | 64-bit - same |
| Core Frequency | 2.0 GHz | 2.0 GHz - same |
| Security Accelerator | SEC 4.2 | SEC 4.2 - same |
| Memory Controllers | DDR3, DDR3L | DDR3, DDR3L - same |
| Operating Temperature | -40C to +105C | -40C to +105C - same |
主な差別化要因
- Industrial -40C to +105C operating temperature range （vs Commercial-grade QorIQ P3 variants)
- Integrated SEC 4.2 cryptographic accelerator （vs QorIQ P5020 variants without SEC)
- Dual-core 64-bit e5500 at 2.0 GHz with coherency （vs Single-core QorIQ P1 family)
設計ノート
The 1295-ball FCPBGA dissipates substantial heat under dual-core 2.0 GHz load with all SERDES lanes active. A multi-layer PCB with continuous power and ground planes plus a heatsink attached via thermal interface material is mandatory for sustained operation. Junction-to-ambient thermal resistance should be characterized at the worst-case workload before production release.
Power-rail sequencing must follow the QorIQ P5 reference manual - core voltage, platform voltage, and SERDES supplies must ramp in the prescribed order to avoid latch-up. Use a power-management IC that supports the P5020 sequence rather than discrete regulators. Decoupling requires bulk, mid-range, and high-frequency capacitors placed adjacent to each supply ball.
High-speed SERDES lanes (PCIe, SRIO, SATA, XAUI) require 100-ohm differential impedance with length matching per lane within the tolerance specified in the reference manual. Use 4 to 8 layer stack-up with dedicated ground reference planes beneath each SERDES pair, and avoid routing signals across plane splits which causes impedance discontinuities and EMI.
Do not populate the P5020NXE7VNB on a board designed for a QorIQ P3 or P4 family - although some package variants are footprint-compatible, the boot ROM, power sequencing, and SERDES pin-out differ. Always verify against the specific P5020 datasheet and design checklist, and design for the SEC 4.2 firmware load path required for production deployment.
DDR3/DDR3L memory routing requires matched-length byte lanes with 50-ohm single-ended impedance, and the address/command traces must be routed on a separate layer with reference to a ground plane. Place the DDR3 termination VTT regulator close to the DIMM or memory devices to minimize parasitic inductance, and follow the QorIQ P5 DDR3 design guide for fly-by or T-branch topology selection.
コンプライアンス情報
RoHS, REACH, lead-free, and halogen-free status not present in the verified web data; set to unknown per data-authenticity rules. AEC-Q100 not applicable - the P5020NXE7VNB is a networking MPU, not an automotive-grade IC.
