Texas Instruments

PCM1737E/2K - 24-Bit 192kHz Stereo DAC | Texas Instruments

料号: PCM1737E/2K ✓ 量产中
4.5 V Vdss 28-pin SSOP (DB) Package
最小起订量: 1 |

PCM1737E/2K 概述

Texas Instruments PCM1737E/2K is a 24-bit, 192 kHz sampling stereo audio digital-to-analog converter with 106 dB signal-to-noise ratio, housed in a 28-pin SSOP package. The /2K ordering suffix specifies a 2000-piece tape-and-reel shipment, making the device suitable for high-volume automated production.

An audio DAC is a mixed-signal semiconductor that converts digital audio samples into an analog voltage suitable for driving an audio output stage. In the broader hierarchy, PCM1737E/2K belongs to the digital-to-analog converter class within interface ICs, which sits within the broader semiconductor and signal-conversion product categories. Its role is to reconstruct left and right audio channels from digital words received from an audio processor, digital audio receiver, or other digital source.

The converter supports 24-bit digital audio data at a maximum sampling rate of 192 kHz. Listings also identify I2S-compatible operation and the enhanced multi-level delta-sigma architecture. The 106 dB SNR rating describes the signal-to-noise performance of the analog output stage, while the 192 kHz capability permits high-resolution playback of lossless PCM material and compatibility with professional 48 kHz, 96 kHz, and 192 kHz workflows.

The PCM1737 uses separate analog and digital supply domains, allowing the system designer to manage analog and digital power rails independently. Independent rail management can reduce ground-current interaction between switching circuitry and the sensitive analog output section. The SSOP package provides a compact 28-pin implementation, although its lead pitch requires careful assembly planning and adequate spacing between neighboring components.

Typical uses include network audio receivers, home-theater audio processors, CD and DVD players, digital mixing consoles, active speakers, soundbar signal paths, and multi-channel audio equipment. The 24-bit resolution and 192 kHz sampling rate are particularly useful when the product must accept high-rate I2S audio from a digital audio host while preserving a compact stereo output stage.

When laying out the board, route the digital I2S signals away from the analog outputs and place analog filtering components close to the output pins. Keep switching-regulator inductors and high-current digital paths on the opposite side of the board where practical. Use a clean analog ground strategy, minimize loop area around the DAC and its output network, and follow the manufacturer reference layout for power, ground, and decoupling connections.

This page combines the manufacturer device information with package, ordering, interface, and replacement guidance. It identifies genuine same-footprint choices while highlighting the differences that must be checked before substituting an audio converter in a finished design.

直接替换替代料: PCM1737E/2K ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: PCM1737E/2K (相同外形与封装尺寸) ——差异在于 Converter Type, Package, Resolution.

Texas Instruments
Converter Type: Stereo digital-to-analog converter
Texas Instruments
Converter Type: 24-bit stereo digital-to-analog converter
Package: 28-SSOP, 5.30 mm body width
Resolution: 24 bits
Texas Instruments
Package: 28-lead SSOP (DB)

PCM1737E

✅ 直接替换
Texas Instruments
📦 28-pin SSOP (DB)
Stereo digital-to-analog converter · 24 bit · 192 kHz · 106 dB · I2S · Enhanced multi-level delta-sigma · SoundPlus audio DAC · 28-pin SSOP

联系询价

查看数据手册 →

PCM1737EG4

✅ 直接替换
Texas Instruments
📦 28-pin SSOP (DB)
24-bit stereo digital-to-analog converter · 192 kHz · 96 kHz · 24 bits · 2 channels · 28-SSOP, 5.30 mm body width · 28 terminals · Surface mount

联系询价

查看数据手册 →

PCM1737E/2KG4

✅ 直接替换
📦 28-pin SSOP (DB)
Same 28-pin SSOP PCM1737 configuration and 24-bit conversion function; G4 ordering designation differs, with 0-pin and 0 kHz stated package/interface differences

📋 参考替代料(不在目录中)

PCM1737E/1

✅ 直接替换
📦 28-pin SSOP (DB)
Same 28-pin SSOP PCM1737 family package; alternate ordering code differs by 0 pins and uses the same 24-bit conversion class

📋 参考替代料(不在目录中)

PCM1793DB

✅ 直接替换
Texas Instruments
📦 28-pin SSOP (DB)
Stereo audio digital-to-analog converter · 24 bit · 192 kHz · I2S · Balanced voltage output · 113 dB · 0.001% · 2.1 V rms at the postamplifier

联系询价

查看数据手册 →

PCM1737E/2K 最大额定值与电气特性

Converter Type Stereo audio digital-to-analog converter
分辨率 24 bit
Maximum Sampling Rate 192 kHz
Signal-to-Noise Ratio 106 dB
Digital Audio Interface I2S
Conversion Architecture Enhanced multi-level delta-sigma
Number of Channels 2 channels
封装 28-pin SSOP (DB)
Package Body Width 5.30 mm
Minimum Supply Voltage 4.5 V
Supply Type Analog and digital supplies
Ordering Package Quantity 2000 pieces per tape-and-reel reel
Carrier Type Tape and reel
安装类型 Surface mount
Digital Interface Format I2S
生命周期状态 Active

PCM1737E/2K 2000 pieces per tape-and-reel reel 引脚配置指南

PCM1737E/2K(2000 pieces per tape-and-reel reel 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

PCM1737E/2K 的 2000 pieces per tape-and-reel reel 封装引脚图

暂无详细引脚数据: PCM1737E/2K.

请参阅 数据手册 以查看完整引脚配置。

典型应用

PCM1737E/2K 适用于 6 应用s: Network Audio Receiver, Home Theater Audio Processor, Digital Audio Player, Digital Mixing Console, Active Speaker and Soundbar, Professional Audio Interface.

🌐

Network Audio Receiver

The PCM1737E/2K fits a network audio receiver because its 24-bit resolution and 192 kHz maximum sampling rate support high-quality digital playback streams while its I2S interface connects cleanly to an audio processor. The dual-channel output reconstructs left and right channels for a downstream analog amplifier. A 106 dB SNR specification provides a useful baseline for minimizing converter-generated noise in quiet passages. Place the DAC close to the analog output network, maintain a continuous ground reference, and separate digital clock traces from the sensitive analog outputs to preserve performance.

📺

Home Theater Audio Processor

A home-theater processor can use the PCM1737E/2K as its stereo output converter when it accepts 24-bit digital audio at up to 192 kHz. The I2S input is appropriate for a digital audio host that already performs decoding and channel processing, while the converter supplies separate left and right analog channels for the output amplifier. Using a 106 dB SNR DAC helps preserve the dynamic range of cinema and music content. Decoupling and analog filtering should be placed according to the reference layout to reduce switching-noise coupling into the output stage.

🎧

Digital Audio Player

The PCM1737E/2K is appropriate for a CD, DVD, or network music player whose digital subsystem outputs I2S audio at a standard or high sampling rate. Its 24-bit conversion resolution accommodates the source word length, and the 192 kHz capability supports high-rate digital content. The 28-pin SSOP package keeps the converter compact while retaining separate left and right outputs. Board planning should prioritize a low-noise analog supply, short output-filter paths, and controlled return-current paths so that the converter's 106 dB SNR can contribute to a quiet system output.

🎚️

Digital Mixing Console

A digital mixing console can use the PCM1737E/2K for a stereo monitoring or auxiliary output channel when the console's digital audio bus provides I2S data. The 192 kHz maximum rate is useful in professional monitoring paths that must accommodate high-rate source material, while 24-bit resolution provides a suitable match for modern digital mixing pipelines. Because several converter channels may share a board, separate noisy processor and switching-converter areas from the analog outputs. Use a solid reference-ground strategy and validate each channel's decoupling and filtering against the manufacturer layout.

🔊

Active Speaker and Soundbar

The PCM1737E/2K can serve as the digital-to-analog stage of an active speaker or soundbar when the system receives digital audio from a host processor. Its stereo output supports conventional left and right amplification channels, while the 24-bit/192 kHz specification accommodates high-resolution streams. The compact SSOP package allows placement close to the amplifier input, helping keep analog traces short. Keep the converter output network away from switching power stages and verify that the chosen amplifier can accept the DAC's output amplitude and common-mode operating requirements.

🎛️

Professional Audio Interface

A professional audio interface can use the PCM1737E/2K for a stereo monitoring output when its digital interface is compatible with I2S and the project requires 24-bit playback up to 192 kHz. The 106 dB SNR rating is relevant to low-level monitoring, although the complete interface specification also depends on clocking, analog gain stages, and output filters. Design the layout so the audio data bus does not run beneath the analog output section, and use independent local decoupling at the converter pins to limit supply disturbance during high-volume digital activity.

推荐产品汇总

PCM1737E Texas Instruments 用于: Network Audio Receiver, Digital Audio Player, Active Speaker and Soundbar PCM1737EG4 Texas Instruments 用于: Network Audio Receiver, Digital Mixing Console, Professional Audio Interface PCM1737E/2KG4 Alternate ordering designation in the same SSOP converter family 用于: Home Theater Audio Processor, Digital Mixing Console, Professional Audio Interface PCM1737E/1 Same PCM1737 family device with an alternate ordering code 用于: Home Theater Audio Processor, Active Speaker and Soundbar PCM1793DB Texas Instruments 用于: Digital Audio Player
What is the PCM1737E/2K?
The PCM1737E/2K is a Texas Instruments 24-bit, 192 kHz stereo audio digital-to-analog converter with a 106 dB signal-to-noise ratio. It uses an enhanced multi-level delta-sigma architecture and accepts I2S digital audio for conversion into left and right analog output channels. According to the Texas Instruments PCM1737 product page, the device is supplied in a 28-pin SSOP package, and the /2K suffix denotes a 2000-piece tape-and-reel carrier configuration.
Where can I download the PCM1737E/2K datasheet PDF?
The official PCM1737E/2K datasheet is available through the Texas Instruments product literature link at https://www.ti.com/lit/gpn/pcm1737. The manufacturer product page also provides ordering information, quality details, and part-specific resources. Use the manufacturer document for authoritative pin descriptions, electrical characteristics, application diagrams, and recommended circuit implementations rather than relying on a distributor summary.
What are the key specifications of PCM1737E/2K that engineers should know?
The PCM1737E/2K provides 24-bit resolution, a maximum sampling rate of 192 kHz, I2S digital audio, a 106 dB SNR rating, and two output channels in a 28-pin SSOP package. Texas Instruments describes it as an enhanced multi-level delta-sigma audio DAC. Its key engineering constraint is the 0.65 mm-class SSOP footprint, which requires careful PCB layout, assembly planning, and adequate pin-to-pin clearance for surrounding components.
Can PCM1737E/2K be used for high-resolution audio?
Yes, the PCM1737E/2K is suitable for high-resolution stereo audio because it supports 24-bit words at up to 192 kHz. The 106 dB SNR specification provides a direct measure of the converter's signal quality, while I2S connectivity allows it to receive digital audio from a host processor or digital audio interface. System-level performance also depends on the clock source, analog supply quality, output filtering, and downstream analog amplifier design.
What is the difference between PCM1737E/2K and PCM1737E?
The PCM1737E/2K and PCM1737E use the same 28-pin SSOP conversion-device package, while /2K specifies a 2000-piece tape-and-reel carrier for the packaged part. The public comparison information identifies consistent terminals, packages, and principal functional characteristics. Consequently, PCM1737E is a candidate for a board-level substitution when the carrier format, temperature grade, and production ordering requirements are independently confirmed.
When should I choose PCM1737E/2K over PCM1737EG4?
Choose PCM1737E/2K when a 2000-piece reel and the standard PCM1737 ordering configuration match your automated assembly plan. Choose PCM1737EG4 when its associated green or environmental ordering designation is required. Both are identified as 28-pin SSOP Texas Instruments devices with consistent package and functional characteristics, so the decision should be driven by the exact manufacturer ordering code, qualification needs, and procurement availability rather than by an assumed electrical difference.
Is the PCM1737E/2K an active part?
Yes, Texas Instruments lists the PCM1737E/2K as an active orderable configuration. The manufacturer product-details result identifies the exact PCM1737E/2K ordering code, and the product page states that slash-marked models are supplied in tape-and-reel quantities indicated by the suffix. Before a large production release, confirm the current order quantity, temperature grade, and lifecycle status on the manufacturer part-details page.
What is the best drop-in replacement for PCM1737E/2K?
PCM1737E is the closest same-package candidate identified in the available cross-reference information because it uses the same 28-pin SSOP package and is described as having consistent terminals and functional characteristics. The reel and grade suffixes still require review. PCM1793DB also has a 28-pin SSOP footprint, but a matching footprint alone does not guarantee identical digital control, analog output, filtering, or power configuration, so it should not be treated as a drop-in part without a complete pin and function review.
What can replace PCM1737E/2K without changing the PCB?
PCM1737E, PCM1737EG4, and PCM1737E/2KG4 are the strongest same-footprint candidates because each is identified with the 28-pin SSOP PCM1737 package and consistent functional characteristics. A replacement should be selected only after checking every pin name, analog-output connection, digital-control mode, supply requirement, and filtering recommendation. Carrier suffix differences affect reel configuration and order quantity rather than necessarily changing the silicon function.
Is PCM1737E/2K suitable for an I2S audio interface?
The PCM1737E/2K is suitable for an I2S interface because Texas Instruments and distributor product information identify the device as a 24-bit audio DAC with I2S operation. The digital host must still supply compatible clocking, bit-oriented framing, word length, and timing signals. Validate the detailed interface mode, master or slave clock arrangement, and supported data format against the manufacturer application information before finalizing the PCB interface.
Where can I buy PCM1737E/2K and check its lead time?
Use the Request a Quote form on this XAIPART page to request current PCM1737E/2K availability, unit pricing, minimum order quantity, and lead time. The component is a standard catalog part with a 2000-piece tape-and-reel ordering option. Supply the required reel quantity, target date, and shipment destination in the quote request so procurement can confirm the current supply position without relying on an outdated listing.
What is the price of PCM1737E/2K?
Current PCM1737E/2K pricing is obtained through the Request a Quote form on this page. Because audio-DAC supply can move by reel quantity, date, and manufacturer lead time, use the quote form rather than a static historical listing when preparing a production budget. Include the required quantity of 2000-piece reels, estimated annual usage, and requested delivery schedule for a commercially actionable response.
Is PCM1737E/2K in stock?
Current PCM1737E/2K stock should be confirmed through the Request a Quote form on this page. Texas Instruments identifies /2K as a tape-and-reel order configuration containing 2000 devices per reel, but that ordering fact does not by itself establish current inventory. A procurement request should state the number of reels, required ship date, and whether inspection, traceability, or extended-temperature packaging is required.
What design considerations matter for the PCM1737E/2K layout?
The critical layout considerations are clock integrity, analog-output isolation, supply decoupling, and ground-domain management. Keep I2S and clock traces away from the analog outputs, minimize return-loop area, place filtering components near their associated pins, and follow the manufacturer reference layout. The SSOP package also needs careful solder-paste and assembly planning because its closely spaced leads can create bridging risk during hand rework.
Is PCM1737E/2K compliant with RoHS and REACH?
The RoHS and REACH status must be confirmed in the Texas Instruments product documentation or material-declaration record for the exact PCM1737E/2K ordering code. This page does not infer environmental declarations from the component category or package. For a regulated production release, obtain the manufacturer declaration applicable to the selected grade and packaging configuration, then add those records to the product compliance file.

工程参考数据: PCM1737E/2K ——对比、设计指导和合规信息。

选型指南

Choose PCM1737E/2K when the design requires a 24-bit stereo audio DAC, I2S connectivity, operation up to 192 kHz, and a 2000-piece tape-and-reel format for production. It is particularly suitable for network receivers, home-theater processors, digital players, and active speakers where the PCM1737 family is already supported. PCM1737E is a logical candidate when the same 28-pin SSOP device is acceptable but the /2K reel configuration is not required. PCM1737EG4 and PCM1737E/2KG4 are useful when their specific grade or ordering designation matches procurement or environmental requirements. PCM1737E/1 provides another family ordering option that still requires exact pin and qualification review. PCM1793DB has the same broad package and conversion class, but it should be selected only after confirming clocking, control modes, analog outputs, filtering, and electrical limits because matching package dimensions alone do not establish drop-in compatibility.

与替代料对比

参数 本产品 PCM1737E PCM1737EG4 PCM1737E/2KG4 PCM1737E/1 PCM1793DB
Package 28-pin SSOP (DB) 28-pin SSOP (DB) 28-pin SSOP (DB) 28-pin SSOP (DB) 28-pin SSOP (DB) 28-pin SSOP (DB)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Converter Type Stereo audio digital-to-analog converter Stereo audio digital-to-analog converter Stereo audio digital-to-analog converter Stereo audio digital-to-analog converter Stereo audio digital-to-analog converter Stereo audio digital-to-analog converter
Resolution 24 bit 24 bit 24 bit 24 bit 24 bit 24 bit

关键差异点

  • Production-oriented 2000-piece reel configuration (对比 PCM1737E)
  • High-resolution 192 kHz stereo conversion (对比 PCM1793DB)
  • Direct same-family package continuity (对比 PCM1737EG4)

设计说明

Separate the sensitive analog output region from the digital audio bus, switching inductors, and high-current return paths. Route I2S data and clock signals away from the output pins, place the analog output network close to the DAC, and provide a low-impedance ground reference. This arrangement reduces the chance that switching activity will couple into the left or right channels and erode the converter's 106 dB SNR performance.

Follow the manufacturer power-supply and decoupling configuration, including separate analog and digital supply connections. Place local high-frequency bypass capacitors at the corresponding device pins and keep their current loops compact. Because the PCM1737E/2K requires a minimum 4.5 V supply, verify startup, load-transient behavior, and the voltage presented at the pins rather than relying only on the nominal supply selected for the wider system.

Do not treat a shared SSOP footprint as proof that every 28-pin stereo DAC is electrically interchangeable. PCM1793DB matches the package and broad 24-bit DAC category, but digital-control modes, output circuitry, filtering, and electrical limits must still be compared. For direct substitutions, check every pin against the manufacturer pin-description table and confirm software or host-interface compatibility before releasing a replacement to production.

Plan the PCB for the SSOP lead pitch and assembly process before routing surrounding circuitry. Use the manufacturer land pattern, preserve sufficient solder-paste area for consistent joints, and avoid placing tall components where they can interfere with the package pins. The 2000-piece tape-and-reel format is suitable for automated placement, but incoming reel, bake, moisture-handling, and solder-reflow requirements should follow the manufacturer's handling guidance.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Confirm environmental and automotive declarations for the exact ordering code in the manufacturer product documentation and material-declaration records.

相关搜索

PCM1737E/2K datasheet PCM1737E/2K datasheet pdf PCM1737E/2K pinout PCM1737E/2K equivalent PCM1737E/2K replacement PCM1737E/2K cross reference PCM1737E/2K price PCM1737E/2K stock Texas Instruments PCM1737E/2K PCM1737E/2K 24 bit 192kHz DAC PCM1737E/2K SSOP-28 PCM1737E/2K I2S audio converter PCM1737E/2K vs PCM1793DB PCM1737E/2K application circuit

相关元器件 & 术语

Texas Instruments PCM1737E/2K PCM1737E PCM1737EG4 PCM1737E/2KG4 PCM1737E/1 PCM1793DB digital-to-analog converter audio DAC mixed-signal semiconductor delta-sigma converter enhanced multi-level architecture I2S 24-bit resolution 192 kHz sampling rate 106 dB signal-to-noise ratio 28-pin SSOP SSOP package family surface mount tape and reel analog supply digital supply network audio receiver home theater audio processor
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情