PCM1737E/2K - 24-Bit 192kHz Stereo DAC | Texas Instruments
MPN: PCM1737E/2K ✓ فعالPCM1737E/2K نمای کلی
An audio DAC is a mixed-signal semiconductor that converts digital audio samples into an analog voltage suitable for driving an audio output stage. In the broader hierarchy, PCM1737E/2K belongs to the digital-to-analog converter class within interface ICs, which sits within the broader semiconductor and signal-conversion product categories. Its role is to reconstruct left and right audio channels from digital words received from an audio processor, digital audio receiver, or other digital source.
The converter supports 24-bit digital audio data at a maximum sampling rate of 192 kHz. Listings also identify I2S-compatible operation and the enhanced multi-level delta-sigma architecture. The 106 dB SNR rating describes the signal-to-noise performance of the analog output stage, while the 192 kHz capability permits high-resolution playback of lossless PCM material and compatibility with professional 48 kHz, 96 kHz, and 192 kHz workflows.
The PCM1737 uses separate analog and digital supply domains, allowing the system designer to manage analog and digital power rails independently. Independent rail management can reduce ground-current interaction between switching circuitry and the sensitive analog output section. The SSOP package provides a compact 28-pin implementation, although its lead pitch requires careful assembly planning and adequate spacing between neighboring components.
Typical uses include network audio receivers, home-theater audio processors, CD and DVD players, digital mixing consoles, active speakers, soundbar signal paths, and multi-channel audio equipment. The 24-bit resolution and 192 kHz sampling rate are particularly useful when the product must accept high-rate I2S audio from a digital audio host while preserving a compact stereo output stage.
When laying out the board, route the digital I2S signals away from the analog outputs and place analog filtering components close to the output pins. Keep switching-regulator inductors and high-current digital paths on the opposite side of the board where practical. Use a clean analog ground strategy, minimize loop area around the DAC and its output network, and follow the manufacturer reference layout for power, ground, and decoupling connections.
This page combines the manufacturer device information with package, ordering, interface, and replacement guidance. It identifies genuine same-footprint choices while highlighting the differences that must be checked before substituting an audio converter in a finished design.
جایگزینهای drop-in برای PCM1737E/2K — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای PCM1737E/2K (همان فرمفاکتور و فوتپرینت) — متفاوت در Converter Type, Package, Resolution.
PCM1737E
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PCM1737EG4
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PCM1737E/2KG4
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PCM1737E/1
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PCM1793DB
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PCM1737E/2K حداکثر مقادیر مجاز و مشخصات الکتریکی
| Converter Type | Stereo audio digital-to-analog converter |
| رزولوشن | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Signal-to-Noise Ratio | 106 dB |
| Digital Audio Interface | I2S |
| Conversion Architecture | Enhanced multi-level delta-sigma |
| Number of Channels | 2 channels |
| بستهبندی | 28-pin SSOP (DB) |
| Package Body Width | 5.30 mm |
| Minimum Supply Voltage | 4.5 V |
| Supply Type | Analog and digital supplies |
| Ordering Package Quantity | 2000 pieces per tape-and-reel reel |
| Carrier Type | Tape and reel |
| نوع نصب | Surface mount |
| Digital Interface Format | I2S |
| وضعیت چرخه عمر | Active |
راهنمای پیکربندی پین PCM1737E/2K 2000 pieces per tape-and-reel reel
پیکربندی پین برای PCM1737E/2K (پکیج 2000 pieces per tape-and-reel reel). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای PCM1737E/2K.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
PCM1737E/2K مناسب است برای 6 کاربردs: Network Audio Receiver, Home Theater Audio Processor, Digital Audio Player, Digital Mixing Console, Active Speaker and Soundbar, Professional Audio Interface.
Network Audio Receiver
The PCM1737E/2K fits a network audio receiver because its 24-bit resolution and 192 kHz maximum sampling rate support high-quality digital playback streams while its I2S interface connects cleanly to an audio processor. The dual-channel output reconstructs left and right channels for a downstream analog amplifier. A 106 dB SNR specification provides a useful baseline for minimizing converter-generated noise in quiet passages. Place the DAC close to the analog output network, maintain a continuous ground reference, and separate digital clock traces from the sensitive analog outputs to preserve performance.
پیشنهادی
Home Theater Audio Processor
A home-theater processor can use the PCM1737E/2K as its stereo output converter when it accepts 24-bit digital audio at up to 192 kHz. The I2S input is appropriate for a digital audio host that already performs decoding and channel processing, while the converter supplies separate left and right analog channels for the output amplifier. Using a 106 dB SNR DAC helps preserve the dynamic range of cinema and music content. Decoupling and analog filtering should be placed according to the reference layout to reduce switching-noise coupling into the output stage.
پیشنهادی
Digital Audio Player
The PCM1737E/2K is appropriate for a CD, DVD, or network music player whose digital subsystem outputs I2S audio at a standard or high sampling rate. Its 24-bit conversion resolution accommodates the source word length, and the 192 kHz capability supports high-rate digital content. The 28-pin SSOP package keeps the converter compact while retaining separate left and right outputs. Board planning should prioritize a low-noise analog supply, short output-filter paths, and controlled return-current paths so that the converter's 106 dB SNR can contribute to a quiet system output.
پیشنهادی
Digital Mixing Console
A digital mixing console can use the PCM1737E/2K for a stereo monitoring or auxiliary output channel when the console's digital audio bus provides I2S data. The 192 kHz maximum rate is useful in professional monitoring paths that must accommodate high-rate source material, while 24-bit resolution provides a suitable match for modern digital mixing pipelines. Because several converter channels may share a board, separate noisy processor and switching-converter areas from the analog outputs. Use a solid reference-ground strategy and validate each channel's decoupling and filtering against the manufacturer layout.
پیشنهادی
Active Speaker and Soundbar
The PCM1737E/2K can serve as the digital-to-analog stage of an active speaker or soundbar when the system receives digital audio from a host processor. Its stereo output supports conventional left and right amplification channels, while the 24-bit/192 kHz specification accommodates high-resolution streams. The compact SSOP package allows placement close to the amplifier input, helping keep analog traces short. Keep the converter output network away from switching power stages and verify that the chosen amplifier can accept the DAC's output amplitude and common-mode operating requirements.
پیشنهادی
Professional Audio Interface
A professional audio interface can use the PCM1737E/2K for a stereo monitoring output when its digital interface is compatible with I2S and the project requires 24-bit playback up to 192 kHz. The 106 dB SNR rating is relevant to low-level monitoring, although the complete interface specification also depends on clocking, analog gain stages, and output filters. Design the layout so the audio data bus does not run beneath the analog output section, and use independent local decoupling at the converter pins to limit supply disturbance during high-volume digital activity.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای PCM1737E/2K — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | PCM1737E | PCM1737EG4 | PCM1737E/2KG4 | PCM1737E/1 | PCM1793DB |
|---|---|---|---|---|---|---|
| Package | 28-pin SSOP (DB) | 28-pin SSOP (DB) | 28-pin SSOP (DB) | 28-pin SSOP (DB) | 28-pin SSOP (DB) | 28-pin SSOP (DB) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Converter Type | Stereo audio digital-to-analog converter | Stereo audio digital-to-analog converter | Stereo audio digital-to-analog converter | Stereo audio digital-to-analog converter | Stereo audio digital-to-analog converter | Stereo audio digital-to-analog converter |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit |
تفاوتهای کلیدی
- Production-oriented 2000-piece reel configuration (در مقابلPCM1737E)
- High-resolution 192 kHz stereo conversion (در مقابلPCM1793DB)
- Direct same-family package continuity (در مقابلPCM1737EG4)
یادداشتهای طراحی
Separate the sensitive analog output region from the digital audio bus, switching inductors, and high-current return paths. Route I2S data and clock signals away from the output pins, place the analog output network close to the DAC, and provide a low-impedance ground reference. This arrangement reduces the chance that switching activity will couple into the left or right channels and erode the converter's 106 dB SNR performance.
Follow the manufacturer power-supply and decoupling configuration, including separate analog and digital supply connections. Place local high-frequency bypass capacitors at the corresponding device pins and keep their current loops compact. Because the PCM1737E/2K requires a minimum 4.5 V supply, verify startup, load-transient behavior, and the voltage presented at the pins rather than relying only on the nominal supply selected for the wider system.
Do not treat a shared SSOP footprint as proof that every 28-pin stereo DAC is electrically interchangeable. PCM1793DB matches the package and broad 24-bit DAC category, but digital-control modes, output circuitry, filtering, and electrical limits must still be compared. For direct substitutions, check every pin against the manufacturer pin-description table and confirm software or host-interface compatibility before releasing a replacement to production.
Plan the PCB for the SSOP lead pitch and assembly process before routing surrounding circuitry. Use the manufacturer land pattern, preserve sufficient solder-paste area for consistent joints, and avoid placing tall components where they can interfere with the package pins. The 2000-piece tape-and-reel format is suitable for automated placement, but incoming reel, bake, moisture-handling, and solder-reflow requirements should follow the manufacturer's handling guidance.
اطلاعات انطباق
Confirm environmental and automotive declarations for the exact ordering code in the manufacturer product documentation and material-declaration records.