Texas Instruments

PCM1750UG4 - Dual 18-Bit Audio ADC | Texas Instruments

料号: PCM1750UG4 ✗ 停产
4.75 V to 5.25 V Vdss 28-pin SOIC Package
最小起订量: 1 |

PCM1750UG4 概述

Texas Instruments PCM1750UG4 is a dual-channel, 18-bit monolithic CMOS audio analog-to-digital converter designed for dynamic signal applications. It uses a serial interface, operates from a 4.75 V to 5.25 V supply, and is packaged in a 28-pin SOIC with a 7.50 mm body width. The converter features true co-phased inputs, an internal sample-and-hold function for each channel, and an internal reference.

An audio ADC is a data-acquisition IC that converts continuously varying analog audio voltages into digital words for processing, storage, transmission, or playback. The PCM1750UG4 belongs to the broader signal-conversion hierarchy: analog-to-digital converter, data-conversion IC, interface IC, and semiconductor. Its dual-channel architecture supports simultaneous conversion of left and right audio signals while its serial output reduces the number of interconnects required between the converter and a digital audio processor.

The principal features include 18-bit resolution, two true co-phased analog input channels, internal sample-and-hold circuits, an internal reference, and a serial digital interface. The true co-phased input arrangement is especially useful in stereo systems because both channels are intended to be sampled in phase, helping preserve timing relationships within the digital audio stream. Its internal reference reduces the external component count required for basic converter operation.

The PCM1750UG4 combines a dual CMOS analog front end with an 18-bit conversion section and digital interface in one monolithic device. Serial data transfer supports integration with audio codecs, digital signal processors, microcontrollers, and other digital-audio systems. According to the manufacturer datasheet, total power dissipation is less than 300 mW maximum when using negative 5 V supplies. Other electrical characteristics, including conversion rate, dynamic range, total harmonic distortion, input impedance, and clock requirements, should be confirmed in the relevant datasheet tables before final design sign-off.

Typical uses include stereo audio capture, professional and consumer audio equipment, digital mixers, audio recording systems, multimedia terminals, and communication equipment with analog audio inputs. The 28-pin SOIC package is suitable for conventional surface-mount PCB assembly. Systems requiring a smaller footprint should evaluate a different package rather than assuming mechanical compatibility.

When designing around the PCM1750UG4, follow the datasheet-supported input, reference, clock, and decoupling arrangements. Preserve analog and digital return-current separation, provide stable local supply bypassing, and route the serial interface away from high-current switching nodes. Confirm the complete pin assignment and exposed thermal or configuration requirements from the manufacturer pin-description table before assigning PCB tracks.

This product record combines the PCM1750UG4's key converter characteristics with packaging guidance, replacement considerations, and practical integration advice. It also highlights the importance of checking interface timing and analog signal conditioning rather than relying only on the headline 18-bit resolution when evaluating an audio conversion design.

直接替换替代料: PCM1750UG4 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: PCM1750UG4 (相同外形与封装尺寸) ——差异在于 Architecture, Converter Type, Package.

Texas Instruments
Architecture: Dual-channel
Converter Type: Dual CMOS 18-bit monolithic audio analog-to-digital converter
Package: 28-SOIC
对比 PCM1750UG4 →

PCM1750U

✅ 直接替换
Texas Instruments
📦 28-SOIC
Dual CMOS 18-bit monolithic audio analog-to-digital converter · 18 bit · Dual-channel · Successive approximation · Serial · Audio ADC · 28-SOIC · 28 terminals

联系询价

查看数据手册 →

PCM1750U/1KG4

✅ 直接替换
📦 28-SOIC
Same 18-bit dual-ADC architecture and 28-SOIC terminal arrangement; 1K marking configuration differs from UG4

📋 参考替代料(不在目录中)

PCM1750U/1K

✅ 直接替换
Texas Instruments
📦 28-SOIC
Dual successive-approximation audio ADC · 2 channels · 18 bits · Serial · ±4.75 V to ±5.25 V · ±5 V · -40°C to +85°C · Industrial

联系询价

查看数据手册 →

PCM1750UG4 最大额定值与电气特性

Converter Type Dual-channel audio ADC
分辨率 18 bit
Architecture Monolithic CMOS
Input Configuration Dual, true co-phased inputs
Sample-and-Hold Internal, one per channel
Internal Reference Yes
Digital Interface Serial
电源电压 4.75 V to 5.25 V
Maximum Total Power Dissipation Less than 300 mW at -5 V supplies
封装 28-pin SOIC
Package Body Width 7.50 mm
安装类型 Surface Mount
Product Type Stereo audio ADC
Application Dynamic signal applications
Channel Count 2 channels
Conversion Resolution 18 bit

PCM1750UG4 7.50 mm 引脚配置指南

PCM1750UG4(7.50 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

PCM1750UG4 的 7.50 mm 封装引脚图

暂无详细引脚数据: PCM1750UG4.

请参阅 数据手册 以查看完整引脚配置。

典型应用

PCM1750UG4 适用于 6 应用s: Stereo Audio Capture, Professional Audio Equipment, Digital Mixer and Signal Processor, Audio Recording System, Consumer Audio Interface, Communication and Broadcast Equipment.

🎧

Stereo Audio Capture

The PCM1750UG4 fits stereo audio capture because it provides two true co-phased inputs, an 18-bit conversion resolution, and an internal sample-and-hold circuit for each channel. Place the converter at the analog input stage and condition left and right signals to the supported input range before the ADC. Its serial output connects directly to a digital audio processor, while true co-phasing helps retain the timing relationship between the two channels for recording and transmission.

🎚️

Professional Audio Equipment

The dual 18-bit PCM1750UG4 is appropriate for professional monitoring and signal-conversion equipment that must acquire a balanced or unbalanced stereo pair. True co-phased sampling supports coherent left and right channel capture, while the internal reference and sample-and-hold functions simplify the converter section. Signal conditioning remains essential: use the manufacturer application circuit as the starting point for input attenuation, coupling, grounding, and supply bypass arrangements.

🔧

Digital Mixer and Signal Processor

A digital mixer can use the PCM1750UG4 when it requires simultaneous acquisition of two analog audio channels at 18-bit resolution. The serial interface reduces the number of signal traces compared with a parallel converter, leaving more board area for processing and routing circuitry. True co-phased inputs help maintain channel alignment, but the system clock and serial framing must follow the datasheet timing requirements to avoid sampling errors.

🎥

Audio Recording System

The PCM1750UG4 can form the acquisition front end of a two-channel audio recording system. Its 18-bit resolution preserves substantial dynamic detail, while internal sample-and-hold circuits support controlled signal acquisition and an internal reference reduces external-reference complexity. The converter should be paired with clean analog front-end filtering, low-noise grounding, and a digital interface destination that supports the required serial format and clock rate.

🔊

Consumer Audio Interface

The PCM1750UG4 is suitable for legacy consumer audio interfaces that accept two analog channels and communicate digitally with a host controller. Its serial interface supports compact PCB integration, while the 28-SOIC package is easy to assemble with conventional surface-mount equipment. For USB or network audio products, the host-side interface and clocking architecture must provide a compatible signal path rather than treating the ADC's serial interface as a direct USB connection.

🌐

Communication and Broadcast Equipment

The PCM1750UG4 can serve in communication or broadcast equipment requiring two-channel analog monitoring and sampling. Its true co-phased inputs are beneficial when preserving stereo ambience or paired-channel timing is important, and the internal reference supports a compact converter implementation. For externally referenced or exceptionally precise systems, engineers should verify whether the internal reference satisfies the required accuracy and noise objectives before finalizing the analog architecture.

What is the PCM1750UG4?
The PCM1750UG4 is a Texas Instruments dual-channel, 18-bit monolithic CMOS audio ADC. It converts two analog audio channels into serial digital data and includes true co-phased inputs, an internal sample-and-hold circuit for each channel, and an internal reference. The device is offered in a 28-pin SOIC package, making it suitable for conventional surface-mount stereo audio designs.
What is the resolution and channel count of the PCM1750UG4?
The PCM1750UG4 provides 18-bit resolution across two analog input channels. Its dual-channel architecture uses true co-phased inputs and separate internal sample-and-hold functions, which supports stereo acquisition with preserved channel timing. According to the manufacturer datasheet, it is a monolithic CMOS converter optimized for dynamic signal applications and uses a serial digital interface.
What is the supply voltage of the PCM1750UG4?
The PCM1750UG4 operates from a 4.75 V to 5.25 V analog supply. The manufacturer datasheet also describes operation using negative 5 V supplies and states that total power dissipation remains below 300 mW maximum in that condition. Board designers should use the complete recommended operating tables before selecting decoupling and negative-rail generation components.
Where can I download the PCM1750UG4 datasheet PDF?
The PCM1750UG4 datasheet PDF is available through the linked manufacturer-document mirror in this product record. It contains the electrical characteristics, application information, pin descriptions, internal-reference details, and recommended external circuitry. Use the document's pin-description table when assigning PCB nets because the complete public pin list is not reproduced on this page.
Where is the pinout for the PCM1750UG4?
The PCM1750UG4 pinout is documented in the manufacturer datasheet's pin-description table. The converter uses a 28-pin SOIC package, but this product record does not reproduce the individual pin names and numbers. Before routing a board, assign every pin from the datasheet table, including supply, ground, analog-input, clock, and serial-interface functions.
Does the PCM1750UG4 have an internal voltage reference?
Yes, the PCM1750UG4 includes an internal reference. This feature reduces the external circuitry needed to establish the converter's reference voltage in a basic audio-capture design. Reference accuracy, permitted external-reference arrangements, and the recommended bypass network should nevertheless be checked in the manufacturer datasheet before production release.
Where can I buy PCM1750UG4 and check its current availability?
Current availability and lead time for PCM1750UG4 should be requested through the Request a Quote form on this page. Because this converter is a legacy catalog part and its lifecycle status is obsolete, quotation should confirm genuine condition, traceability, and supported delivery rather than relying on an unverified stock count. Use the exact PCM1750UG4 suffix when requesting the quotation.
What is the price of PCM1750UG4?
The current commercial price for PCM1750UG4 is available through the Request a Quote form on this page. A legacy catalog part can vary in price and condition depending on remaining inventory, traceability, and packaging. Submit the exact MPN and required quantity so the returned quotation can be matched to the intended configuration.
What is the lead time for PCM1750UG4?
The current lead time for PCM1750UG4 must be confirmed through the Request a Quote form on this page. As an obsolete audio converter, availability may depend on remaining factory inventory or qualified channel stock. The request should specify quantity, package condition, and traceability requirements before a delivery commitment is considered.
Is PCM1750UG4 in stock?
Stock status for PCM1750UG4 is not stated as a fixed quantity on this page. Use the Request a Quote form for a current allocation and lead-time response. The exact MPN should be included because obsolete IC inventory can differ by reel, tube, condition, and manufacturing lot, and a generic stock message may not identify the required material.
PCM1750UG4 vs PCM1750U: which is the better drop-in replacement?
PCM1750U is the closest identified replacement because cross-reference information describes it as completely interchangeable with PCM1750UG4, with consistent terminals, package, and principal performance characteristics. The PCM1750UG4 suffix identifies the ordered package or marking configuration, so engineers should verify the supplier's suffix interpretation and required reel or tube format before approving the substitution.
When should I choose PCM1750UG4 over PCM1750U?
Choose PCM1750UG4 when its exact ordered suffix is required by the BOM, approved supplier, or existing production documentation. Choose PCM1750U only when its package, terminal arrangement, and operating behavior have been confirmed for the actual sourcing channel. Both represent the same dual 18-bit CMOS audio ADC family, so the decision is primarily exact-order traceability and configuration matching.
Is PCM1750UG4 suitable for stereo audio capture?
The PCM1750UG4 is suitable for stereo audio capture because it provides two true co-phased input channels, an 18-bit conversion resolution, and internal sample-and-hold functions. These features support synchronized acquisition of left and right analog signals. The analog front end must still provide appropriate signal levels, grounding, and anti-alias filtering before the converter inputs.
What can replace PCM1750UG4?
PCM1750U is the identified drop-in replacement for PCM1750UG4. The cross-reference information describes it as a complete replacement with consistent terminals, package, and main functional characteristics. PCM1750U/1KG4 and PCM1750U/1K also appear in the same 28-pin SOIC family, but their suffix configuration should be verified before treating either as an exact production replacement.
What are the key PCM1750UG4 specifications engineers should know?
The key PCM1750UG4 specifications are dual-channel operation, 18-bit resolution, true co-phased inputs, internal sample-and-hold circuits, an internal reference, a serial interface, and a 4.75 V to 5.25 V supply range. It is packaged in a 28-pin SOIC with a 7.50 mm body width, and total power dissipation is stated as less than 300 mW maximum with negative 5 V supplies.
Is there a Texas Instruments equivalent for PCM1750UG4?
Texas Instruments PCM1750U is the closest same-brand equivalent identified for PCM1750UG4 because cross-reference information describes complete interchangeability, consistent terminals, and the same package. However, no distinct cross-brand equivalent was established with the same 28-pin SOIC footprint and confirmed electrical compatibility. Validate the complete datasheet characteristics and supplier suffix requirements before substitution.

工程参考数据: PCM1750UG4 ——对比、设计指导和合规信息。

选型指南

Choose PCM1750UG4 when the BOM requires that exact ordered suffix and the product must remain a Texas Instruments 28-SOIC dual 18-bit audio ADC. PCM1750U is the preferred identified drop-in candidate when equivalent functionality and terminal compatibility are confirmed and the suffix can be updated in the BOM. PCM1750U/1KG4 and PCM1750U/1K provide the same documented package and functional arrangement but require careful review of device marking, packing configuration, and supplier traceability. The principal engineering tradeoff is not conversion performance but lifecycle risk: PCM1750UG4 is identified as obsolete, so purchasing must include condition, lot, and quantity confirmation. For a new design, compare this legacy converter against currently supported audio ADCs rather than treating an obsolete-family substitution as a long-term lifecycle decision.

与替代料对比

参数 本产品 PCM1750U PCM1750U/1KG4 PCM1750U/1K
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 28-SOIC 28-SOIC 28-SOIC 28-SOIC
Converter Type Dual-channel audio ADC Dual-channel audio ADC Dual-channel audio ADC Dual-channel audio ADC
Resolution 18 bit 18 bit 18 bit 18 bit
Architecture Monolithic CMOS Monolithic CMOS Monolithic CMOS Monolithic CMOS
Input Configuration Dual true co-phased inputs Dual true co-phased inputs Dual true co-phased inputs Dual true co-phased inputs
Internal Reference Yes Yes Yes Yes
Digital Interface Serial Serial Serial Serial
Supply Voltage 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V
Maximum Total Power Dissipation Less than 300 mW at -5 V supplies Less than 300 mW at -5 V supplies Less than 300 mW at -5 V supplies Less than 300 mW at -5 V supplies

关键差异点

  • Directly identified complete replacement family (对比 PCM1750U)
  • No PCB change for identified family alternatives (对比 PCM1750U/1KG4)
  • True co-phased stereo acquisition (对比 PCM1750U/1K)

设计说明

Separate analog input and digital interface return paths as recommended in the manufacturer application circuit. Place input, reference, and supply bypass components close to their associated pins, and route serial clock and data traces away from switching-regulator nodes and high-impedance analog inputs. Short ground returns and a quiet analog ground region reduce coupling into the 18-bit conversion result.

Design the positive and optional negative supply rails around the 4.75 V to 5.25 V operating requirement and the datasheet's negative 5 V condition. The manufacturer states total power dissipation is below 300 mW maximum with -5 V supplies. Decoupling must be selected and placed according to the recommended circuit, with stable supply impedance maintained across the converter's operating frequency range.

Treat both analog inputs as timing-sensitive nodes. Use the recommended input network to maintain the supported voltage range and bandwidth, and terminate or level-shift the master clock and serial signals according to the host interface. Validate setup and hold timing at the digital receiver because a correct analog conversion cannot compensate for an incorrectly timed serial word.

Do not substitute an MPN solely because the suffix appears similar. PCM1750U, PCM1750U/1K, and PCM1750U/1KG4 appear in the same 28-SOIC family, but the approved BOM, device marking, packaging form, and supplier traceability must all be checked. Also assign all 28 pins from the manufacturer pin table rather than inferring unused pins from a generic SOIC outline.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No compliance declarations were included in the manufacturer or distributor records used for this product.

相关搜索

PCM1750UG4 datasheet PCM1750UG4 pinout PCM1750UG4 datasheet pdf PCM1750UG4 specifications PCM1750UG4 equivalent PCM1750UG4 replacement PCM1750UG4 cross reference PCM1750UG4 vs PCM1750U PCM1750UG4 28-SOIC PCM1750UG4 stereo audio ADC PCM1750UG4 price PCM1750UG4 stock Texas Instruments PCM1750UG4

相关元器件 & 术语

Texas Instruments PCM1750UG4 PCM1750U PCM1750U/1KG4 PCM1750U/1K analog-to-digital converter audio ADC data-conversion IC interface IC semiconductor dual-channel converter successive-approximation converter true co-phased inputs sample and hold internal voltage reference serial audio interface 18-bit resolution CMOS 28-SOIC SOIC family surface-mount package SMD stereo audio capture dynamic signal processing Texas Instruments PCM1750UG4
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情