PCM1750UG4 - Dual 18-Bit Audio ADC | Texas Instruments
N.º da peça: PCM1750UG4 ✗ Fim de vidaPCM1750UG4 Visão geral
An audio ADC is a data-acquisition IC that converts continuously varying analog audio voltages into digital words for processing, storage, transmission, or playback. The PCM1750UG4 belongs to the broader signal-conversion hierarchy: analog-to-digital converter, data-conversion IC, interface IC, and semiconductor. Its dual-channel architecture supports simultaneous conversion of left and right audio signals while its serial output reduces the number of interconnects required between the converter and a digital audio processor.
The principal features include 18-bit resolution, two true co-phased analog input channels, internal sample-and-hold circuits, an internal reference, and a serial digital interface. The true co-phased input arrangement is especially useful in stereo systems because both channels are intended to be sampled in phase, helping preserve timing relationships within the digital audio stream. Its internal reference reduces the external component count required for basic converter operation.
The PCM1750UG4 combines a dual CMOS analog front end with an 18-bit conversion section and digital interface in one monolithic device. Serial data transfer supports integration with audio codecs, digital signal processors, microcontrollers, and other digital-audio systems. According to the manufacturer datasheet, total power dissipation is less than 300 mW maximum when using negative 5 V supplies. Other electrical characteristics, including conversion rate, dynamic range, total harmonic distortion, input impedance, and clock requirements, should be confirmed in the relevant datasheet tables before final design sign-off.
Typical uses include stereo audio capture, professional and consumer audio equipment, digital mixers, audio recording systems, multimedia terminals, and communication equipment with analog audio inputs. The 28-pin SOIC package is suitable for conventional surface-mount PCB assembly. Systems requiring a smaller footprint should evaluate a different package rather than assuming mechanical compatibility.
When designing around the PCM1750UG4, follow the datasheet-supported input, reference, clock, and decoupling arrangements. Preserve analog and digital return-current separation, provide stable local supply bypassing, and route the serial interface away from high-current switching nodes. Confirm the complete pin assignment and exposed thermal or configuration requirements from the manufacturer pin-description table before assigning PCB tracks.
This product record combines the PCM1750UG4's key converter characteristics with packaging guidance, replacement considerations, and practical integration advice. It also highlights the importance of checking interface timing and analog signal conditioning rather than relying only on the headline 18-bit resolution when evaluating an audio conversion design.
Alternativas drop-in para PCM1750UG4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PCM1750UG4 (mesmo formato e footprint) — diferindo em Architecture, Converter Type, Package.
PCM1750U
✅ Drop-InConsulte o preço
Ver ficha técnica →PCM1750U/1KG4
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PCM1750U/1K
✅ Drop-InConsulte o preço
Ver ficha técnica →PCM1750UG4 Classificações máximas e características elétricas
| Converter Type | Dual-channel audio ADC |
| Resolução | 18 bit |
| Architecture | Monolithic CMOS |
| Input Configuration | Dual, true co-phased inputs |
| Sample-and-Hold | Internal, one per channel |
| Internal Reference | Yes |
| Digital Interface | Serial |
| Tensão de alimentação | 4.75 V to 5.25 V |
| Maximum Total Power Dissipation | Less than 300 mW at -5 V supplies |
| Encapsulamento | 28-pin SOIC |
| Package Body Width | 7.50 mm |
| Tipo de montagem | Surface Mount |
| Product Type | Stereo audio ADC |
| Application | Dynamic signal applications |
| Channel Count | 2 channels |
| Conversion Resolution | 18 bit |
Guia de Configuração de Pinos do PCM1750UG4 7.50 mm
Configuração de pinos para PCM1750UG4 (pacote 7.50 mm). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para PCM1750UG4.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PCM1750UG4 é adequado para 6 aplicaçãos: Stereo Audio Capture, Professional Audio Equipment, Digital Mixer and Signal Processor, Audio Recording System, Consumer Audio Interface, Communication and Broadcast Equipment.
Stereo Audio Capture
The PCM1750UG4 fits stereo audio capture because it provides two true co-phased inputs, an 18-bit conversion resolution, and an internal sample-and-hold circuit for each channel. Place the converter at the analog input stage and condition left and right signals to the supported input range before the ADC. Its serial output connects directly to a digital audio processor, while true co-phasing helps retain the timing relationship between the two channels for recording and transmission.
Recomendado
Professional Audio Equipment
The dual 18-bit PCM1750UG4 is appropriate for professional monitoring and signal-conversion equipment that must acquire a balanced or unbalanced stereo pair. True co-phased sampling supports coherent left and right channel capture, while the internal reference and sample-and-hold functions simplify the converter section. Signal conditioning remains essential: use the manufacturer application circuit as the starting point for input attenuation, coupling, grounding, and supply bypass arrangements.
Recomendado
Digital Mixer and Signal Processor
A digital mixer can use the PCM1750UG4 when it requires simultaneous acquisition of two analog audio channels at 18-bit resolution. The serial interface reduces the number of signal traces compared with a parallel converter, leaving more board area for processing and routing circuitry. True co-phased inputs help maintain channel alignment, but the system clock and serial framing must follow the datasheet timing requirements to avoid sampling errors.
Recomendado
Audio Recording System
The PCM1750UG4 can form the acquisition front end of a two-channel audio recording system. Its 18-bit resolution preserves substantial dynamic detail, while internal sample-and-hold circuits support controlled signal acquisition and an internal reference reduces external-reference complexity. The converter should be paired with clean analog front-end filtering, low-noise grounding, and a digital interface destination that supports the required serial format and clock rate.
Recomendado
Consumer Audio Interface
The PCM1750UG4 is suitable for legacy consumer audio interfaces that accept two analog channels and communicate digitally with a host controller. Its serial interface supports compact PCB integration, while the 28-SOIC package is easy to assemble with conventional surface-mount equipment. For USB or network audio products, the host-side interface and clocking architecture must provide a compatible signal path rather than treating the ADC's serial interface as a direct USB connection.
Recomendado
Communication and Broadcast Equipment
The PCM1750UG4 can serve in communication or broadcast equipment requiring two-channel analog monitoring and sampling. Its true co-phased inputs are beneficial when preserving stereo ambience or paired-channel timing is important, and the internal reference supports a compact converter implementation. For externally referenced or exceptionally precise systems, engineers should verify whether the internal reference satisfies the required accuracy and noise objectives before finalizing the analog architecture.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PCM1750UG4 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PCM1750U | PCM1750U/1KG4 | PCM1750U/1K |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC |
| Converter Type | Dual-channel audio ADC | Dual-channel audio ADC | Dual-channel audio ADC | Dual-channel audio ADC |
| Resolution | 18 bit | 18 bit | 18 bit | 18 bit |
| Architecture | Monolithic CMOS | Monolithic CMOS | Monolithic CMOS | Monolithic CMOS |
| Input Configuration | Dual true co-phased inputs | Dual true co-phased inputs | Dual true co-phased inputs | Dual true co-phased inputs |
| Internal Reference | Yes | Yes | Yes | Yes |
| Digital Interface | Serial | Serial | Serial | Serial |
| Supply Voltage | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Maximum Total Power Dissipation | Less than 300 mW at -5 V supplies | Less than 300 mW at -5 V supplies | Less than 300 mW at -5 V supplies | Less than 300 mW at -5 V supplies |
Principais diferenciais
- Directly identified complete replacement family (vs PCM1750U)
- No PCB change for identified family alternatives (vs PCM1750U/1KG4)
- True co-phased stereo acquisition (vs PCM1750U/1K)
Notas de projeto
Separate analog input and digital interface return paths as recommended in the manufacturer application circuit. Place input, reference, and supply bypass components close to their associated pins, and route serial clock and data traces away from switching-regulator nodes and high-impedance analog inputs. Short ground returns and a quiet analog ground region reduce coupling into the 18-bit conversion result.
Design the positive and optional negative supply rails around the 4.75 V to 5.25 V operating requirement and the datasheet's negative 5 V condition. The manufacturer states total power dissipation is below 300 mW maximum with -5 V supplies. Decoupling must be selected and placed according to the recommended circuit, with stable supply impedance maintained across the converter's operating frequency range.
Treat both analog inputs as timing-sensitive nodes. Use the recommended input network to maintain the supported voltage range and bandwidth, and terminate or level-shift the master clock and serial signals according to the host interface. Validate setup and hold timing at the digital receiver because a correct analog conversion cannot compensate for an incorrectly timed serial word.
Do not substitute an MPN solely because the suffix appears similar. PCM1750U, PCM1750U/1K, and PCM1750U/1KG4 appear in the same 28-SOIC family, but the approved BOM, device marking, packaging form, and supplier traceability must all be checked. Also assign all 28 pins from the manufacturer pin table rather than inferring unused pins from a generic SOIC outline.
Informações de conformidade
No compliance declarations were included in the manufacturer or distributor records used for this product.