PEX8748-CA80BC - 48-Lane Gen 3 PCIe Switch | Broadcom
料号: PEX8748-CA80BC ✓ 量产中PEX8748-CA80BC 概述
A PCI Express switch is a semiconductor device that routes high-speed serial lanes between one host or upstream connection and multiple downstream endpoints. Within the interface hierarchy, the PEX8748 is a PCI Express interface IC, network-interface switch, and multi-host fabric controller. It provides non-blocking, high-bandwidth connectivity while allowing multiple PCI Express domains to share switching resources.
The PEX8748 combines 48 Gen 3 lanes with 12 configurable ports. This lane-to-port arrangement supports dense server and storage topologies that require more fan-out than a conventional endpoint controller. Its FCBGA-676 package integrates a large number of high-speed differential I/O connections into a compact 27 x 27 mm area, making careful ball assignment, reference-plane continuity, and thermal design essential.
The switch is intended for PCIe Gen 3 fabrics spanning multiple hosts and endpoints. Its non-blocking architecture is suited to server consolidation, storage aggregation, communications equipment, and graphics platforms. Configuration flexibility also supports peer-to-peer arrangements and failover topologies, allowing redundant paths or workload distribution across multiple downstream devices.
Typical uses include high-performance computing servers, AI inference platforms, NVMe storage fabrics, GPU acceleration systems, and industrial communication equipment. The 48-lane capacity and 12-port configuration are particularly useful where many PCIe endpoints must converge through a shared switching fabric without relying on separate host-to-endpoint switching paths.
The main design trade-off is thermal and routing complexity. An 8.0 W typical-power device in a 27 x 27 mm FCBGA requires a multilayer PCB with an uninterrupted ground plane, carefully controlled high-speed impedance, and a thermal strategy suited to sustained compute workloads. The package also requires a 676-ball PCB footprint and exact land-pattern compliance; board changes are not practical after layout release.
This product page consolidates the verified electrical identity, package information, multi-host application role, comparable switch families, and practical implementation considerations for engineers evaluating the Broadcom PEX8748-CA80BC for dense PCIe Gen 3 systems.
直接替换替代料: PEX8748-CA80BC ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PEX8748-CA80BC (相同外形与封装尺寸) ——差异在于 Package Type.
PEX8749-CA80BC-G
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
PEX8747-CA80BC-G
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
PEX8745-CA80BC-G
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
PEX8744-CA80BC-G
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
PEX8743-CA80BC-G
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
PEX8748-CA80BC 最大额定值与电气特性
| Product Type | PCI Express switch IC |
| PCI Express Generation | Gen 3 |
| Total Lane Count | 48 lanes |
| Port Count | 12 ports |
| Switching Architecture | Multi-host, non-blocking PCI Express switch |
| Typical Power Consumption | 8.0 W |
| Package Type | FCBGA-676 |
| Package Pin Count | 676 balls |
| Package Dimensions | 27 x 27 mm |
| 安装类型 | Surface mount |
| Signal Standard | PCI Express |
| Supported Traffic Patterns | Fan-out, aggregation, peer-to-peer, and multi-host interconnection |
| RoHS 状态 | Compliant |
PEX8748-CA80BC 27 x 27 mm 引脚配置指南
PEX8748-CA80BC(27 x 27 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: PEX8748-CA80BC.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PEX8748-CA80BC 适用于 6 应用s: Multi-Host Server PCI Express Fabrics, AI Inference and GPU Acceleration Systems, NVMe Storage Aggregation, High-Performance Computing Interconnects, Communications Infrastructure Equipment, Graphical Processing and Workstation Systems.
Multi-Host Server PCI Express Fabrics
The PEX8748-CA80BC is well suited to servers that connect multiple hosts or endpoint groups through a shared PCI Express fabric. Its 48 Gen 3 lanes and 12 configurable ports provide the fan-out needed for dense accelerator, storage-controller, and network-interface arrangements. The switch architecture supports non-blocking traffic paths, aggregation, and peer-to-peer transfers while keeping the system topology centralized in one 27 x 27 mm FCBGA device. Engineering teams should model traffic classes and failover routes during configuration, then validate throughput and latency under realistic mixed workloads.
推荐
AI Inference and GPU Acceleration Systems
The PEX8748-CA80BC can form the switching backbone of an AI inference platform that connects accelerators, host processors, and memory or storage controllers. Forty-eight Gen 3 lanes distributed across 12 ports allow multiple endpoint groups to operate behind a scalable fabric rather than requiring independent host-to-device paths. The non-blocking switching behavior supports concurrent accelerator traffic and peer-to-peer movement of intermediate data. The design must account for the documented 8.0 W typical switch power, requiring a multilayer PCB, continuous ground planes, and system-level thermal testing near dense accelerator hardware.
推荐
NVMe Storage Aggregation
The PEX8748-CA80BC provides a practical way to aggregate multiple PCI Express storage paths behind a shared switch fabric. Its 12 ports and 48 lanes allow controllers or host domains to be organized into a high-density topology, while non-blocking operation helps maintain concurrent storage traffic. For high-latency-sensitive workloads, validate queue behavior, congestion controls, and failover behavior rather than relying only on theoretical lane bandwidth. Board implementation should use the manufacturer reference design, maintain continuous reference planes, and reserve generous thermal capacity for sustained transfer activity.
推荐
High-Performance Computing Interconnects
In high-performance computing systems, the PEX8748-CA80BC can provide scalable fan-out and aggregation between multiple compute nodes, accelerators, and I/O devices. Its 48-lane Gen 3 fabric and 12-port configuration suit systems that need a shared, non-blocking PCI Express switching layer for tightly coupled accelerator workloads. Peer-to-peer traffic paths can reduce unnecessary routing through host software stacks when the configuration and firmware support them. Integration requires high-speed layout discipline, comprehensive lane testing, and thermal design capable of handling the switch's 8.0 W typical operating reference in sustained workloads.
推荐
Communications Infrastructure Equipment
The PEX8748-CA80BC can support communications equipment that needs redundant or consolidated PCI Express connectivity across line cards, processing modules, and service processors. Twelve configurable ports and 48 lanes provide enough switching density for multi-host arrangements, while aggregation and peer-to-peer modes can organize traffic according to the system's availability requirements. Failover paths should be tested at both the physical-link and configuration layers to ensure that the intended traffic is restored after a link or endpoint failure. The 676-ball package requires high-layer-count PCB construction and careful power-delivery and thermal implementation.
推荐
Graphical Processing and Workstation Systems
The PEX8748-CA80BC is suitable for graphics and workstation platforms that need multiple PCI Express endpoints behind a high-density switching fabric. Its 48 Gen 3 lanes and 12 ports can support endpoints such as graphics accelerators, storage controllers, and high-speed capture devices while preserving non-blocking paths between active devices. Peer-to-peer configurations may improve data movement between compatible endpoints when supported by the complete platform. Because this is a 676-pin FCBGA with an 8.0 W typical-power reference, designers must use the manufacturer's land pattern and reference circuitry and should verify airflow, board warpage, and connector-dependent mechanical constraints.
推荐
推荐产品汇总
工程参考数据: PEX8748-CA80BC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Product Type | PCI Express Gen 3 switch IC |
| Brand | Broadcom |
| Package | FCBGA-676 (27 x 27 mm) |
| Total Lane Count | 48 lanes |
| Port Count | 12 ports |
| Typical Power | 8.0 W |
| Switching Architecture | Multi-host, non-blocking |
| Supported Traffic Patterns | Fan-out, aggregation, peer-to-peer, and failover |
| RoHS Status | Compliant |
关键差异点
- Higher downstream fan-out than the compared PEX8747 configuration (对比 PEX8747-CA80BC)
- Multi-host non-blocking switching architecture (对比 PEX8747-CA80BC)
- Broader endpoint-fan-out capacity for accelerator fabrics (对比 PEX8796-AB80BI)
设计说明
Design the PCB and enclosure for the documented 8.0 W typical-power reference before finalizing placement. Provide uninterrupted ground planes beneath the FCBGA-676 area, minimize thermal resistance through the board stack, and use the Broadcom reference design to identify thermal-via and pad-array requirements. Validate adjacent component temperatures and junction behavior under sustained endpoint traffic rather than relying on a lightly loaded board. Actual power varies with port activity and traffic, so correlation testing should cover the intended maximum-use case.
Use the manufacturer FCBGA-676 land pattern and ball map without substituting a generic BGA footprint. Every differential PCI Express pair must follow the prescribed length-matching, spacing, and impedance rules, while supply and ground balls require the shortest practical connections to low-inductance decoupling. Maintain continuous reference planes beneath high-speed lanes and avoid splits or routing voids that create impedance discontinuities. PCB stackup should be selected before placement because it determines achievable impedance and loss.
Do not assume that two Broadcom switches in FCBGA-676 packages are interchangeable. The PEX8747-CA80BC is listed with 5 ports versus 12 ports for the PEX8748-CA80BC, and package equality does not prove identical ball assignments, power sequencing, firmware behavior, or port configuration. For any replacement project, compare the manufacturer ball map, electrical limits, initialization sequence, reference schematic, and firmware configuration. PCB respin may be required if any assignment or function differs.
Treat all 48 Gen 3 lanes as a simultaneous high-speed signal-integrity problem. Follow the reference design's stackup and via geometry, control lane skew across the complete route, and verify differential impedance with the actual PCB material set. Keep test points and stubs tightly controlled, and maintain proper reference-plane return paths for every high-speed pair. Conduct eye, jitter, compliance, and interoperability testing with realistic endpoint traffic because individual lane testing does not reveal every multi-lane or power-integrity interaction.
合规信息
RoHS compliance is stated for the PEX8748-CA80BC. AEC-Q100 status is recorded as not applicable because this is a general-purpose PCIe switch rather than an automotive-qualified device. No additional compliance claims are made without explicit manufacturer documentation.