Microchip Technology

PIC10F220-I/MC - 8-Bit 8MHz Flash MCU | Microchip

料号: PIC10F220-I/MC ✓ 量产中
8-DFN, 2 x 3 mm Package 8 MHz Speed 384 bytes (256 x 12 bits) Memory
最小起订量: 1 |

PIC10F220-I/MC 概述

The Microchip Technology PIC10F220-I/MC is an 8-bit, fully static, Flash-based CMOS microcontroller operating at up to 8 MHz, with 384 bytes of program Flash and 16 bytes of RAM in an 8-DFN 2x3 mm package. It uses a compact RISC instruction set containing 33 single-word instructions, with most instructions executing in one 1 us cycle and program branches requiring two cycles.

A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. The PIC10F220 belongs to the 8-bit microcontroller hierarchy and uses Harvard-style program and data storage concepts to support efficient embedded control. Its small memory footprint, static operation, and simple instruction set make it suitable for compact products requiring basic decision-making, timing, input monitoring, and output control without a large embedded system.

Program memory provides 384 bytes, organized as 256 words by 12 bits, while the device includes 16 bytes of data RAM. The 12-bit-wide instruction architecture supports approximately 2:1 code compression compared with typical 8-bit microcontrollers in the same class. These characteristics can reduce the firmware footprint and help designers fit routine control functions into a compact MCU while retaining a straightforward development model.

The PIC10F220 architecture uses 33 single-word, single-cycle instructions, and the operating frequency reaches 8 MHz. Most instructions execute in one 1 us cycle at the maximum clock rate, while program branches take two cycles. Because the device is fully static, its processing architecture can support low-duty-cycle embedded control strategies where activity is managed around the specific task rather than requiring continuous background processing.

Typical uses include compact control panels, simple sensor interfaces, low-speed monitoring modules, household appliances, and other embedded systems with modest memory requirements. Its small 2x3 mm DFN package can also support space-constrained designs, although the exposed-land requirements and assembly process must be accommodated by the PCB designer. The industrial-temperature order code identifies the variant intended for industrial operating conditions.

Designers should treat the 384-byte Flash limit and 16-byte RAM as the principal architecture constraints. Firmware organization, data buffering, and call-stack depth therefore require early review, particularly when converting code written for a larger PIC10F member. Board design should also follow the manufacturer package drawing and land-pattern guidance because the 2x3 mm DFN footprint is compact and sensitive to assembly alignment.

This product page combines the manufacturer specifications, package details, application guidance, sourcing workflow, and verified replacement information to support faster engineering review. It also highlights the limited amount of genuine drop-in coverage for this exact package and helps engineers distinguish a true pin-compatible substitution from a related PIC10 device that would require a board or firmware change.

直接替换替代料: PIC10F220-I/MC ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: PIC10F220-I/MC (相同外形与封装尺寸) ——差异在于 Package, ADC, Core Architecture, Instruction Set, Internal Oscillator.

Microchip Technology
Package: 8-pin DFN with Exposed Pad (MC)
ADC: 8-bit, up to 4 input channels
Core Architecture: PIC10 RISC, 12-bit instruction word
Microchip Technology
Package: 8-pin DFN (2x3 mm)
ADC: 8-bit
Core Architecture: PIC 8-bit RISC

PIC10F222-E/MC

✅ 直接替换
Microchip Technology
📦 8-DFN (2x3)
8-bit Flash Microcontroller (MCU) · PIC10 RISC, 12-bit instruction word · 768 bytes · 23 bytes · 4 (plus 1 input-only GP3) · 8-bit, up to 4 input channels · 33 single-word/single-cycle instructions · 2.0 V to 5.5 V

联系询价

查看数据手册 →

PIC10F220-I/MC 最大额定值与电气特性

Microcontroller Type 8-bit RISC Flash microcontroller
Maximum CPU Frequency 8 MHz
Program Memory 384 bytes (256 x 12 bits)
Data Memory 16 bytes RAM
Instruction Set 33 single-word instructions
Typical Instruction Cycle 1 us
Program Branch Cycle 2 cycles
Code Compression Approximately 2:1
Program Memory Type Flash
Processor Technology CMOS
Execution Mode Fully static
封装 8-DFN, 2 x 3 mm
安装类型 Surface mount
Temperature Grade Industrial grade

PIC10F220-I/MC 8-dfn, 2 x 3 mm 引脚配置指南

PIC10F220-I/MC(8-dfn, 2 x 3 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

PIC10F220-I/MC 的 8-dfn, 2 x 3 mm 封装引脚图

暂无详细引脚数据: PIC10F220-I/MC.

请参阅 数据手册 以查看完整引脚配置。

典型应用

PIC10F220-I/MC 适用于 6 应用s: Compact Sensor Interface, Small Appliance Controller, Low-Power Monitoring Module, Simple Building-Control Node, LED Status and Sequencing Controller, Battery-Powered Control Node.

🧩

Compact Sensor Interface

PIC10F220-I/MC fits compact sensor interfaces that require periodic sampling, threshold decisions, and digital output control without a large embedded processor. Its 8 MHz RISC core can execute most instructions in one 1 us cycle, while the fully static CMOS design supports low-duty-cycle operating strategies. The principal constraint is memory: 384 bytes of Flash and 16 bytes of RAM favor compact, carefully structured firmware. In a typical sensor node, the MCU reads a digital or suitably conditioned input, applies filtering and threshold logic, and updates an indicator or actuator output. Firmware should avoid unnecessary buffering, while the PCB should keep traces short and provide clean grounding around the sensor interface.

🏭

Small Appliance Controller

PIC10F220-I/MC is appropriate for a small appliance controller built around a short sequence of user inputs, timers, indicators, and simple actuator outputs. Its 33 single-word instructions and 12-bit architecture make compact firmware organization practical, while the 8 MHz clock provides more timing headroom than required for many slow control tasks. Because program Flash is only 384 bytes and RAM is 16 bytes, the design should use a layered state machine and avoid large lookup tables. In operation, the controller can debounce inputs, time a sequence, update a status LED, and switch a load through suitable drive circuitry while retaining deterministic control flow.

🔋

Low-Power Monitoring Module

PIC10F220-I/MC suits a low-power monitoring module that periodically checks a sensor or switch state and reports an event rather than processing data continuously. Its fully static Flash-based CMOS implementation allows firmware and peripheral activity to be organized around infrequent events, and most instructions complete in a 1 us cycle at 8 MHz. The limited 16-byte RAM makes streaming buffers impractical, so counters and state flags should be designed to overwrite older values. A practical implementation can sleep between samples, wake on a qualifying input change, update a counter, and transmit a compact status code through the selected interface.

🏢

Simple Building-Control Node

PIC10F220-I/MC can serve as a simple building-control node for a single room or equipment zone where the task is limited to local input reading, relay-style output control, and status reporting. Its industrial order code is appropriate for product designs expected to operate across industrial temperature conditions, although the exact limits must be confirmed in the manufacturer datasheet. The MCU should use a small, deterministic state machine to prevent simultaneous loads, provide startup defaults, and avoid blocking delays that consume RAM. Firmware size and call-stack depth should be checked early because the 384-byte Flash and 16-byte RAM budgets are modest.

💡

LED Status and Sequencing Controller

PIC10F220-I/MC is a practical fit for an LED status or sequencing controller that must produce predictable timing from a compact set of inputs. The 8 MHz execution rate and one-cycle instruction timing support responsive event handling, while the small 8-DFN 2x3 mm package helps reduce board area in space-constrained products. Firmware can maintain a sequence position in a single variable, update the LED outputs, and advance the state after the required delay. Because the device has only 16 bytes of RAM, avoid long animation tables and rely on compact lookup logic. Validate LED current limits and drive topology separately because the MCU specification does not replace the load-driver design.

⚡

Battery-Powered Control Node

PIC10F220-I/MC can support a battery-powered control node when the design prioritizes low component count and simple event-driven behavior over broad data storage. Its fully static CMOS architecture, compact 2 x 3 mm DFN package, and 1 us typical instruction cycle suit small embedded control loops. Energy optimization still depends on the selected clock, oscillator arrangement, I/O states, and duty cycle, so the complete power budget must be measured rather than inferred from the CPU frequency alone. Keep the firmware compact, disable unused inputs, and wake only for relevant events to minimize both active and leakage-related consumption.

推荐产品汇总

PIC10F220 Base device family member 用于: Compact Sensor Interface, Small Appliance Controller, Low-Power Monitoring Module, Simple Building-Control Node, LED Status and Sequencing Controller, Battery-Powered Control Node PIC10F222-E/MC Microchip Technology 用于: Compact Sensor Interface, Small Appliance Controller, Low-Power Monitoring Module, Simple Building-Control Node, LED Status and Sequencing Controller, Battery-Powered Control Node
What are the key specifications of PIC10F220-I/MC that engineers should know?
The PIC10F220-I/MC is an 8-bit, fully static, Flash-based CMOS microcontroller rated up to 8 MHz, with 384 bytes of program Flash, 16 bytes of RAM, and an 8-DFN 2x3 mm package. According to the Microchip PIC10F220/222 Data Sheet 40001270F, its RISC core provides 33 single-word instructions; most execute in one 1 us cycle, while program branches take two cycles. Its 12-bit instruction width supports approximately 2:1 code compression compared with typical 8-bit microcontrollers in the same class.
What is the operating voltage of PIC10F220-I/MC?
The exact operating-voltage limits for the PIC10F220-I/MC must be taken from the manufacturer datasheet rather than inferred from the device family name. The PIC10F220/222 Data Sheet 40001270F is the controlling document for supply-voltage limits, reset behavior, and electrical operating conditions. Confirm both the input range and the maximum allowable voltage on every I/O pin against the latest revision before committing the PCB or connecting external circuitry.
Where can I download the PIC10F220-I/MC datasheet PDF?
The official PIC10F220/222 Data Sheet 40001270F can be downloaded from the Microchip document link on this page. It covers the PIC10F220 family architecture, instruction set, memory organization, electrical characteristics, package information, and application details. The Microchip PIC10F220 product page provides a second manufacturer reference for lifecycle, ordering information, and related resources. Use the manufacturer PDF for design sign-off because third-party copies may not reflect the latest revision.
Where can I find the PIC10F220-I/MC pinout?
The PIC10F220-I/MC uses an 8-pin DFN package measuring 2 x 3 mm, and its authoritative pin diagram appears in the Microchip PIC10F220/222 Data Sheet 40001270F. Use the pin-description table and package drawing to assign VDD, VSS, programming, reset, and I/O functions. The package drawing should also be used to establish the land pattern, exposed-pad requirements, pin-one orientation, and assembly clearances for the selected board manufacturing process.
How much program and data memory does PIC10F220-I/MC have?
PIC10F220-I/MC provides 384 bytes of Flash program memory, arranged as 256 words by 12 bits, plus 16 bytes of RAM for working data. According to the Microchip PIC10F220/222 Data Sheet 40001270F, the 12-bit-wide instruction architecture typically provides 2:1 code compression relative to other 8-bit microcontrollers in its class. Firmware, buffered measurements, and call-stack usage should therefore be reviewed during architecture selection rather than after PCB layout is complete.
What can replace PIC10F220-I/MC?
PIC10F222-E/MC is the closest identified replacement candidate because it belongs to the same PIC10F220/222 family and uses the same 8-DFN 2x3 mm package. It is a drop-in option only after checking the manufacturer pin table, memory capacity, temperature grade, reset behavior, and device-specific peripherals. The identified candidate uses a different order-code temperature suffix, so production substitution must include a complete schematic, firmware, and operating-condition review rather than relying on package similarity alone.
Is PIC10F220-I/MC suitable for a compact sensor interface?
PIC10F220-I/MC is suitable for a small sensor interface that needs basic control logic, digital I/O, and limited data buffering rather than intensive computation. Its 8 MHz RISC core, 16 bytes of RAM, and 384-byte Flash limit make it appropriate for periodic sampling, threshold decisions, and actuator signaling. The small 2 x 3 mm DFN package also supports compact assemblies, but the 16-byte RAM and finite program-memory budget require careful firmware planning.
Is PIC10F220-I/MC the same as PIC10F222-E/MC?
PIC10F220-I/MC and PIC10F222-E/MC are related family members, but they are not automatically identical. Both are associated with the PIC10F220/222 data sheet and the compact 8-DFN package family, while their order codes identify different base devices and temperature designations. A replacement requires comparison of pin functions, Flash and RAM capacity, peripheral resources, electrical limits, and the intended temperature range. The manufacturer datasheet remains the deciding reference for production equivalence.
PIC10F220-I/MC vs PIC10F222-E/MC - which is better for a compact control module?
Choose PIC10F220-I/MC when its 384-byte Flash and 16-byte RAM are sufficient and its device-specific behavior has already been validated. Consider PIC10F222-E/MC when its family-level capabilities meet the design and the manufacturer confirms the required pin and peripheral compatibility. Both candidates occupy the same 8-DFN 2x3 mm package family, but package identity alone cannot establish interchangeability. Confirm memory requirements, temperature exposure, reset configuration, ADC needs, and code compatibility before selecting either device.
When should I choose PIC10F220-I/MC over PIC10F222-E/MC?
Choose PIC10F220-I/MC when existing firmware, validation, and schematic documentation are already tied to that exact device and the 384-byte program-memory limit is acceptable. This avoids unnecessary requalification of a known control platform. Consider PIC10F222-E/MC when the broader family offers a better fit for memory, peripheral, or temperature requirements, but budget time for a formal replacement review. Both candidates should be evaluated using the manufacturer pin descriptions and electrical specifications.
What is the best Microchip equivalent for PIC10F220-I/MC?
PIC10F222-E/MC is the best identified Microchip-family candidate for a drop-in evaluation because it appears in the same PIC10F220/222 documentation and shares the 8-DFN 2x3 mm package format. It should not be treated as automatically equivalent until the pin table, memory size, ADC configuration, reset behavior, and temperature requirements are matched against the target design. Firmware may also require changes if register definitions or peripheral resources differ.
Where can I buy PIC10F220-I/MC online?
Use the Request a Quote form on this page to request PIC10F220-I/MC availability, current lead time, and minimum-order details. The form provides a direct engineering purchasing route for the exact industrial-grade, 8-DFN order code. Request the required package quantity and ship-to region in the same inquiry so the quote reflects the actual assembly schedule. No static price or stock statement should be used for procurement because those terms can change without notice.
What is the price of PIC10F220-I/MC?
The current PIC10F220-I/MC price is obtained through the Request a Quote form on this page. Request the exact MPN and required quantities so the quotation reflects the correct 8-DFN order code and order schedule. Volume breaks, production status, and lead time can affect commercial terms, making a quote more useful than an outdated list figure. The manufacturer product page and family datasheet provide technical confirmation for the requested device.
What is the lead time for PIC10F220-I/MC?
Current lead time for PIC10F220-I/MC should be requested through the Request a Quote form on this page. Include the planned order quantity, target date, and shipment destination when requesting the quotation. A lead-time response should also state any minimum-order quantity, package allocation, or production-cycle constraints. These commercial details can change, so use the returned quote for planning rather than treating a general market indication as a confirmed allocation.
Is PIC10F220-I/MC in stock?
PIC10F220-I/MC stock availability should be confirmed through the Request a Quote form on this page. Provide the exact order code, required quantity, and intended delivery schedule so the response can identify the current package allocation. Stock status is time-sensitive and can differ by quantity, region, and approved supply channel. Use the quotation response, rather than a general product-page status, for production and incoming-material planning.

工程参考数据: PIC10F220-I/MC ——对比、设计指导和合规信息。

选型指南

Choose PIC10F220-I/MC when the design requires a small, low-cost 8-bit control platform and its 384-byte Flash and 16-byte RAM are sufficient for the complete firmware. The 8 MHz RISC core and 2 x 3 mm DFN package are useful for compact, deterministic embedded products, but the modest memory means architecture and stack budgeting must happen early. Consider PIC10F222-E/MC when the related family provides a better functional fit or a preferred temperature order code. Because both candidates use the same compact package family, a substitution still requires verification of pin functions, memory, peripherals, electrical limits, firmware, and operating temperature. Do not select a related PIC10F device solely because it is physically smaller or shares a package family; the replacement must satisfy the complete product requirements.

与替代料对比

参数 本产品 PIC10F222-E/MC
Brand Microchip Technology Microchip Technology
Package 8-DFN (2x3) 8-DFN (2x3)
Architecture 8-bit RISC 8-bit RISC
Program Memory Type Flash Flash
Temperature Order Code I E

关键差异点

  • Highly compact 8-bit control platform (对比 PIC10F222-E/MC)
  • Efficient instruction-oriented firmware architecture (对比 PIC10F222-E/MC)
  • Compact code footprint (对比 PIC10F222-E/MC)

设计说明

Use the manufacturer package drawing and land-pattern guidance for the 8-DFN 2 x 3 mm package. Confirm exposed-pad dimensions, solder-mask geometry, thermal-via arrangement, and paste pattern with the selected PCB assembly process. Place the device near the points where its I/O and power connections require short routes, while keeping sensitive input traces away from fast-switching nodes. Pin-one orientation must be checked against the assembly drawing because a compact DFN footprint leaves little visual margin for placement errors.

Budget the device against the minimum operating voltage, maximum clock condition, I/O load, and 8-bit Flash operating current stated in the manufacturer datasheet. Place local supply decoupling at the VDD and VSS pins using the capacitance and layout recommended by the manufacturer. Avoid sharing long return paths with switching loads, and terminate unused inputs so they cannot float. For battery-powered designs, measure active and idle current across voltage and temperature rather than estimating consumption from CPU frequency alone.

Treat the 384-byte Flash and 16-byte RAM as hard design constraints, not merely headline capacity values. Map the interrupt vector, library routines, state variables, buffers, and call stack before finalizing the firmware architecture. Prefer compact state machines over large tables, remove unused library code, and test worst-case stack depth under interrupts. When evaluating PIC10F222-E/MC as a substitute, validate register differences, memory requirements, ADC behavior, reset configuration, and temperature limits instead of assuming that the shared package guarantees interchangeability.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer ordering information identifies an industrial-grade device, but specific environmental and material-compliance declarations are not stated in the cited product records.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

pic10f220 datasheet PIC10F220-I/MC datasheet PIC10F220-I/MC specifications PIC10F220-I/MC pinout PIC10F220-I/MC schematic PIC10F220-I/MC equivalent PIC10F220-I/MC replacement PIC10F220-I/MC cross reference PIC10F220-I/MC vs PIC10F222-E/MC PIC10F220-I/MC 8-DFN footprint PIC10F220-I/MC application circuit PIC10F220-I/MC price PIC10F220-I/MC stock Microchip PIC10F220-I/MC

相关元器件 & 术语

Microchip Technology PIC10F220-I/MC PIC10F220 PIC10F222-E/MC 8-bit microcontroller RISC architecture Flash memory CMOS microcontroller fully static microcontroller embedded controller semiconductor 8 MHz 384 bytes Flash 16 bytes RAM 8-DFN 2x3 mm DFN package surface-mount package 12-bit instruction architecture program branch ADC industrial-grade microcontroller sensor interface low-power monitoring small appliance control
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情