PIC10F220-I/MC - 8-Bit 8MHz Flash MCU | Microchip
부품 번호: PIC10F220-I/MC ✓ 활성PIC10F220-I/MC 개요
A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. The PIC10F220 belongs to the 8-bit microcontroller hierarchy and uses Harvard-style program and data storage concepts to support efficient embedded control. Its small memory footprint, static operation, and simple instruction set make it suitable for compact products requiring basic decision-making, timing, input monitoring, and output control without a large embedded system.
Program memory provides 384 bytes, organized as 256 words by 12 bits, while the device includes 16 bytes of data RAM. The 12-bit-wide instruction architecture supports approximately 2:1 code compression compared with typical 8-bit microcontrollers in the same class. These characteristics can reduce the firmware footprint and help designers fit routine control functions into a compact MCU while retaining a straightforward development model.
The PIC10F220 architecture uses 33 single-word, single-cycle instructions, and the operating frequency reaches 8 MHz. Most instructions execute in one 1 us cycle at the maximum clock rate, while program branches take two cycles. Because the device is fully static, its processing architecture can support low-duty-cycle embedded control strategies where activity is managed around the specific task rather than requiring continuous background processing.
Typical uses include compact control panels, simple sensor interfaces, low-speed monitoring modules, household appliances, and other embedded systems with modest memory requirements. Its small 2x3 mm DFN package can also support space-constrained designs, although the exposed-land requirements and assembly process must be accommodated by the PCB designer. The industrial-temperature order code identifies the variant intended for industrial operating conditions.
Designers should treat the 384-byte Flash limit and 16-byte RAM as the principal architecture constraints. Firmware organization, data buffering, and call-stack depth therefore require early review, particularly when converting code written for a larger PIC10F member. Board design should also follow the manufacturer package drawing and land-pattern guidance because the 2x3 mm DFN footprint is compact and sensitive to assembly alignment.
This product page combines the manufacturer specifications, package details, application guidance, sourcing workflow, and verified replacement information to support faster engineering review. It also highlights the limited amount of genuine drop-in coverage for this exact package and helps engineers distinguish a true pin-compatible substitution from a related PIC10 device that would require a board or firmware change.
드롭인 대체품: PIC10F220-I/MC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC10F220-I/MC (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, Core Architecture, Instruction Set, Internal Oscillator.
PIC10F222-E/MC
✅ 드롭인가격 문의
데이터시트 보기 →PIC10F220-I/MC 최대 정격 & 전기적 특성
| Microcontroller Type | 8-bit RISC Flash microcontroller |
| Maximum CPU Frequency | 8 MHz |
| Program Memory | 384 bytes (256 x 12 bits) |
| Data Memory | 16 bytes RAM |
| Instruction Set | 33 single-word instructions |
| Typical Instruction Cycle | 1 us |
| Program Branch Cycle | 2 cycles |
| Code Compression | Approximately 2:1 |
| Program Memory Type | Flash |
| Processor Technology | CMOS |
| Execution Mode | Fully static |
| 패키지 | 8-DFN, 2 x 3 mm |
| 실장 유형 | Surface mount |
| Temperature Grade | Industrial grade |
PIC10F220-I/MC 8-dfn, 2 x 3 mm 핀 구성 가이드
PIC10F220-I/MC(8-dfn, 2 x 3 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC10F220-I/MC.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC10F220-I/MC 적합 용도: 6 애플리케이션s: Compact Sensor Interface, Small Appliance Controller, Low-Power Monitoring Module, Simple Building-Control Node, LED Status and Sequencing Controller, Battery-Powered Control Node.
Compact Sensor Interface
PIC10F220-I/MC fits compact sensor interfaces that require periodic sampling, threshold decisions, and digital output control without a large embedded processor. Its 8 MHz RISC core can execute most instructions in one 1 us cycle, while the fully static CMOS design supports low-duty-cycle operating strategies. The principal constraint is memory: 384 bytes of Flash and 16 bytes of RAM favor compact, carefully structured firmware. In a typical sensor node, the MCU reads a digital or suitably conditioned input, applies filtering and threshold logic, and updates an indicator or actuator output. Firmware should avoid unnecessary buffering, while the PCB should keep traces short and provide clean grounding around the sensor interface.
추천
Small Appliance Controller
PIC10F220-I/MC is appropriate for a small appliance controller built around a short sequence of user inputs, timers, indicators, and simple actuator outputs. Its 33 single-word instructions and 12-bit architecture make compact firmware organization practical, while the 8 MHz clock provides more timing headroom than required for many slow control tasks. Because program Flash is only 384 bytes and RAM is 16 bytes, the design should use a layered state machine and avoid large lookup tables. In operation, the controller can debounce inputs, time a sequence, update a status LED, and switch a load through suitable drive circuitry while retaining deterministic control flow.
추천
Low-Power Monitoring Module
PIC10F220-I/MC suits a low-power monitoring module that periodically checks a sensor or switch state and reports an event rather than processing data continuously. Its fully static Flash-based CMOS implementation allows firmware and peripheral activity to be organized around infrequent events, and most instructions complete in a 1 us cycle at 8 MHz. The limited 16-byte RAM makes streaming buffers impractical, so counters and state flags should be designed to overwrite older values. A practical implementation can sleep between samples, wake on a qualifying input change, update a counter, and transmit a compact status code through the selected interface.
추천
Simple Building-Control Node
PIC10F220-I/MC can serve as a simple building-control node for a single room or equipment zone where the task is limited to local input reading, relay-style output control, and status reporting. Its industrial order code is appropriate for product designs expected to operate across industrial temperature conditions, although the exact limits must be confirmed in the manufacturer datasheet. The MCU should use a small, deterministic state machine to prevent simultaneous loads, provide startup defaults, and avoid blocking delays that consume RAM. Firmware size and call-stack depth should be checked early because the 384-byte Flash and 16-byte RAM budgets are modest.
추천
LED Status and Sequencing Controller
PIC10F220-I/MC is a practical fit for an LED status or sequencing controller that must produce predictable timing from a compact set of inputs. The 8 MHz execution rate and one-cycle instruction timing support responsive event handling, while the small 8-DFN 2x3 mm package helps reduce board area in space-constrained products. Firmware can maintain a sequence position in a single variable, update the LED outputs, and advance the state after the required delay. Because the device has only 16 bytes of RAM, avoid long animation tables and rely on compact lookup logic. Validate LED current limits and drive topology separately because the MCU specification does not replace the load-driver design.
추천
Battery-Powered Control Node
PIC10F220-I/MC can support a battery-powered control node when the design prioritizes low component count and simple event-driven behavior over broad data storage. Its fully static CMOS architecture, compact 2 x 3 mm DFN package, and 1 us typical instruction cycle suit small embedded control loops. Energy optimization still depends on the selected clock, oscillator arrangement, I/O states, and duty cycle, so the complete power budget must be measured rather than inferred from the CPU frequency alone. Keep the firmware compact, disable unused inputs, and wake only for relevant events to minimize both active and leakage-related consumption.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC10F220-I/MC — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC10F222-E/MC |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 8-DFN (2x3) | 8-DFN (2x3) |
| Architecture | 8-bit RISC | 8-bit RISC |
| Program Memory Type | Flash | Flash |
| Temperature Order Code | I | E |
주요 차별점
- Highly compact 8-bit control platform (vs PIC10F222-E/MC)
- Efficient instruction-oriented firmware architecture (vs PIC10F222-E/MC)
- Compact code footprint (vs PIC10F222-E/MC)
설계 노트
Use the manufacturer package drawing and land-pattern guidance for the 8-DFN 2 x 3 mm package. Confirm exposed-pad dimensions, solder-mask geometry, thermal-via arrangement, and paste pattern with the selected PCB assembly process. Place the device near the points where its I/O and power connections require short routes, while keeping sensitive input traces away from fast-switching nodes. Pin-one orientation must be checked against the assembly drawing because a compact DFN footprint leaves little visual margin for placement errors.
Budget the device against the minimum operating voltage, maximum clock condition, I/O load, and 8-bit Flash operating current stated in the manufacturer datasheet. Place local supply decoupling at the VDD and VSS pins using the capacitance and layout recommended by the manufacturer. Avoid sharing long return paths with switching loads, and terminate unused inputs so they cannot float. For battery-powered designs, measure active and idle current across voltage and temperature rather than estimating consumption from CPU frequency alone.
Treat the 384-byte Flash and 16-byte RAM as hard design constraints, not merely headline capacity values. Map the interrupt vector, library routines, state variables, buffers, and call stack before finalizing the firmware architecture. Prefer compact state machines over large tables, remove unused library code, and test worst-case stack depth under interrupts. When evaluating PIC10F222-E/MC as a substitute, validate register differences, memory requirements, ADC behavior, reset configuration, and temperature limits instead of assuming that the shared package guarantees interchangeability.
규정 준수 정보
The manufacturer ordering information identifies an industrial-grade device, but specific environmental and material-compliance declarations are not stated in the cited product records.