PIC16C54A-04E/P - 8-bit OTP MCU, 4MHz, 12 I/O, PDIP-18 | Microchip
料号： PIC16C54A-04E/P ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $2.95 | $2.95 |
| 10 | $2.65 | $26.50 |
| 100 | $2.35 | $235.00 |
| 500 | $2.1 | $1,050.00 |
| 1,000 | $1.9 | $1,900.00 |
PIC16C54A-04E/P 概述
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, program memory, and peripherals around an 8-bit data bus. The PIC16C5X family sits at the low end of the microcontroller hierarchy: 8-bit MCU -> RISC microcontroller -> embedded controller -> semiconductor. It targets cost-sensitive, deterministic control tasks where instruction simplicity and predictable timing outweigh raw throughput. The RISC architecture's 33-instruction set reduces development time and code size versus CISC alternatives.
Key features of the PIC16C54A-04E/P include OTP (One-Time Programmable) EPROM program memory, a 4 MHz external clock input, 25 bytes of general-purpose RAM, 12 bidirectional I/O pins with individual direction control, a power-on reset circuit, a watchdog timer with on-chip RC oscillator, and a sleep (low-power) mode. The 12-bit-wide instructions deliver 2:1 code compression over typical 8-bit CISC competitors, and the Harvard architecture separates program and data buses for deterministic instruction fetch.
Typical applications include appliance controls, simple sensor interfaces, LED driving circuits, hobbyist projects, and industrial logic replacement. Designers favor the PIC16C54A-04E/P for low-cost, low-volume production where the OTP memory suffices and the extended temperature range supports commercial and light-industrial environments. Note that the underlying PIC16C54A die has been superseded by the PIC16F54; new designs are not recommended per the Microchip product page.
When designing with this part, consider migrating to the flash-based PIC16F54 for new designs to gain in-system reprogrammability, or to the PIC16C54C revision for minor errata fixes. Programming requires a UV-erasable window for the JW package or a one-time-programmable programmer for the PDIP form.
This page synthesizes distributor pricing, verified specifications from the Microchip datasheet family, and practical drop-in alternatives not consolidated on any single distributor page.
直接替换替代料： PIC16C54A-04E/P ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PIC16C54A-04E/P （相同外形与封装尺寸） ——差异在于 Program Memory Size, Package, Watchdog Timer, Program Memory Type, Core Architecture.
快速对比工具——选择替代料号进行并排对比：
PIC16C54A-04/P
✅ 直接替换✓ 有现货
$3.75 / 个
查看数据手册 →PIC16C54A-04E/SS
✅ 直接替换✓ 有现货
$1.32 / 个
查看数据手册 →PIC16C54C-04E/P
✅ 直接替换✓ 有现货
$1.55 / 个
查看数据手册 →PIC16F54-I/P
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$0.68 / 个
查看数据手册 →PIC16C54-10I/P
✅ 直接替换✓ 有现货
$1.18 / 个
查看数据手册 →PIC16C54A-04E/P 最大额定值与电气特性
| Family | PIC16C5X |
| Core | 8-bit RISC |
| Program Memory Type | OTP EPROM |
| Program Memory Size | 768 bytes (12-bit word) |
| RAM Size | 25 bytes |
| I/O Pins | 12 |
| 最大时钟频率 | 4 MHz |
| Instruction Cycle | 200 ns (single cycle) |
| Instruction Set Size | 33 instructions |
| Supply Voltage (VDD) | 4.5 V to 5.5 V |
| 工作温度范围 | -40C to +125C (Extended) |
| 封装 | PDIP-18 (300 mil) |
| 安装类型 | Through-Hole |
| 引脚数量 | 18 |
| Watchdog Timer | Yes (with on-chip RC oscillator) |
| Power-On Reset | Yes |
| Sleep Mode | Yes |
PIC16C54A-04E/P 引脚配置
| 引脚 1 | RA2 — Bidirectional I/O pin, Port A bit 2 |
| 引脚 2 | RA3 — Bidirectional I/O pin, Port A bit 3 |
| 引脚 3 | RTCC — RTCC timer I/O pin / Counter input |
| 引脚 4 | MCLR — Master Clear (Reset) input, active low |
| 引脚 5 | VSS — Ground reference |
| 引脚 6 | RB0 — Bidirectional I/O pin, Port B bit 0 |
| 引脚 7 | RB1 — Bidirectional I/O pin, Port B bit 1 |
| 引脚 8 | RB2 — Bidirectional I/O pin, Port B bit 2 |
| 引脚 9 | RB3 — Bidirectional I/O pin, Port B bit 3 |
| 引脚 10 | RB4 — Bidirectional I/O pin, Port B bit 4 |
| 引脚 11 | RB5 — Bidirectional I/O pin, Port B bit 5 |
| 引脚 12 | RB6 — Bidirectional I/O pin, Port B bit 6 |
| 引脚 13 | RB7 — Bidirectional I/O pin, Port B bit 7 |
| 引脚 14 | VDD — Positive supply voltage (4.5V to 5.5V) |
| 引脚 15 | OSC2 — Oscillator output / Clock out |
| 引脚 16 | OSC1 — Oscillator input / Clock in (4 MHz max) |
| 引脚 17 | RA0 — Bidirectional I/O pin, Port A bit 0 |
| 引脚 18 | RA1 — Bidirectional I/O pin, Port A bit 1 |
典型应用
PIC16C54A-04E/P 适用于 6 应用s: Appliance Control, Simple Sensor Interface, LED Display Driving, Hobbyist and Educational Projects, Industrial Logic Replacement, Low-Volume Production Controllers.
Appliance Control
The PIC16C54A-04E/P fits appliance controls because its 12 I/O pins can directly drive relays, triacs, LEDs, and keypad matrices in a single chip. With 4 MHz clock and 200 ns instruction cycle, the MCU executes deterministic control loops fast enough for HVAC fan sequencing, washing-machine timer logic, and microwave oven user interfaces. The 25 bytes RAM is sufficient for state variables, while 768 bytes OTP accommodates fixed control firmware. The extended -40C to +125C operating temperature handles kitchen and garage environments where consumer-grade parts would fail.
推荐
Simple Sensor Interface
The PIC16C54A-04E/P suits simple sensor interfaces where a small MCU must read analog or digital sensors and drive indicator LEDs or displays. Its 12 bidirectional I/O lines handle multiple switch inputs, thermistor dividers, and LED outputs without external logic. The 4 MHz clock and 200 ns cycle support sampling rates suitable for thermistor-based temperature monitoring, optical interrupter counting, and basic capacitive touch sensing. The RISC architecture delivers predictable response times critical for sensor debouncing and threshold detection algorithms.
推荐
LED Display Driving
The PIC16C54A-04E/P drives multiplexed LED displays using its 12 I/O pins to scan 7-segment digits, dot-matrix panels, or discrete LED arrays. The 200 ns instruction cycle enables refresh rates above 100 Hz to eliminate flicker in 4-digit multiplexed displays while leaving CPU bandwidth for button scanning or serial communication. The OTP memory stores fixed lookup tables for character decoding and brightness patterns. The wide 4.5V-5.5V supply matches typical LED driver rails directly, simplifying power architecture in cost-sensitive designs.
推荐
Hobbyist and Educational Projects
The PIC16C54A-04E/P remains popular in hobbyist and educational contexts because of its simple 33-instruction RISC architecture that beginners can learn in a weekend. The PDIP-18 through-hole package is breadboard-friendly and easy to socket, allowing repeated programming experiments. The 4 MHz clock and 200 ns cycle teach fundamental embedded timing concepts without overwhelming complexity. The OTP memory forces disciplined firmware development, an educational advantage when teaching one-shot production programming workflows.
推荐
Industrial Logic Replacement
The PIC16C54A-04E/P replaces discrete logic gates and relay-based control in industrial applications where programmability simplifies design changes. With 12 I/O, the MCU can replace dozens of 74-series logic ICs implementing sequence controllers, counter chains, and timing circuits. The extended -40C to +125C temperature rating suits factory floor environments, and the 4 MHz throughput handles encoder decoding, conveyor sequencing, and simple machine safety interlocks. The deterministic RISC timing guarantees instruction-level repeatability critical for safety logic.
推荐
Low-Volume Production Controllers
The PIC16C54A-04E/P serves low-volume production controllers where OTP cost advantages outweigh flash flexibility. With 768 bytes OTP priced lower per unit than equivalent flash parts in PDIP-18, the device suits high-volume, low-cost products like toys, novelties, single-use timers, and disposable electronic modules. The 33-instruction RISC core produces tight code that fits within the small program space, while the 12 I/O accommodate typical switch-input/LED-output product interfaces without external glue logic.
推荐
推荐产品汇总
工程参考数据： PIC16C54A-04E/P ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC16C54A-04/P | PIC16C54A-04E/SS | PIC16C54C-04E/P | PIC16F54-I/P | PIC16C54-10I/P |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | PDIP-18 | PDIP-18 - same | PDIP-18 - same | PDIP-18 - same | PDIP-18 - same | PDIP-18 - same |
| Program Memory | 768 bytes OTP | 768 bytes OTP | 768 bytes OTP | 768 bytes OTP | 768 bytes Flash | 768 bytes OTP |
| Maximum Clock Frequency | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 20 MHz | 10 MHz |
| RAM Size | 25 bytes | 25 bytes | 25 bytes | 25 bytes | 25 bytes | 25 bytes |
| I/O Pins | 12 | 12 | 12 | 12 | 12 | 12 |
| Operating Temperature | -40C to +125C (Extended) | 0C to +70C (Industrial) | -40C to +125C (Extended) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| Supply Voltage | 4.5V to 5.5V | 4.5V to 5.5V | 4.5V to 5.5V | 4.5V to 5.5V | 2.0V to 5.5V | 4.5V to 5.5V |
关键差异点
- Extended -40C to +125C operating temperature range （对比 PIC16C54A-04/P)
- Flash reprogrammability for modern designs （对比 PIC16C54A-04E/P)
- Higher 10 MHz clock speed for time-critical tasks （对比 PIC16C54-10I/P)
设计说明
The PIC16C54A-04E/P operates from a single 4.5V to 5.5V supply and includes internal power-on reset (POR). Decouple VDD (pin 14) with a 100 nF ceramic capacitor placed within 5 mm of the package, plus a bulk 10 uF tantalum or electrolytic capacitor at the board power entry. The MCLR pin (pin 4) should be tied to VDD through a 10 kohm pull-up resistor per the Microchip PIC16C5X datasheet family, with optional 100 nF decoupling if the reset line is exposed to noise.
Do not exceed the 4 MHz maximum clock input on the PIC16C54A-04E/P; the 04 speed grade is specified for 4 MHz operation. For 10 MHz operation, choose the PIC16C54-10 variant. Also note that OTP memory cannot be electrically erased - verify firmware with a JW windowed part or PIC16F54 (flash) during development before committing to OTP production. The watchdog timer must be explicitly disabled in software if not used, or it will reset the device.
Place the PIC16C54A-04E/P oscillator components (crystal or resonator and load capacitors) within 5 mm of pins 15 (OSC2) and 16 (OSC1) to minimize parasitic capacitance. For through-hole PDIP-18 designs, route I/O traces away from the oscillator area to reduce coupling. Keep digital switching traces (relay drives, triac triggers) short and consider RC snubbers on inductive loads to prevent MCU noise injection that could disrupt the internal watchdog RC oscillator.
合规信息
RoHS and lead-free status not specified in verified data; the extended temp grade E suffix suggests legacy product. PIC16C5X family predates widespread RoHS adoption, so non-RoHS variants may exist. Marked [DATA_NEEDED] for compliance fields not in provided data.
