Microchip Technology

PIC16C64AT-04E/PQ - 8-Bit 4MHz OTP MCU 3.5KB Flash | Microchip

料号: PIC16C64AT-04E/PQ ✗ 停产
有现货 1-3 个工作日内发货
5 V Vdss 44-MQFP (10x10 mm) Package 4 MHz Speed 3.5 KB (2K x 14) OTP Memory
低至 $6.8 USD / 件
最小起订量: 1 |
价格更新于: 2026-09-17
批量定价
数量 单价 小计
1 $9.5 $9.50
10 $8.95 $89.50
100 $8.2 $820.00
500 $7.45 $3,725.00
1,000 $6.8 $6,800.00
ℹ️ 所有价格均以 USD 计价

PIC16C64AT-04E/PQ 概述

The Microchip Technology PIC16C64AT-04E/PQ is an 8-bit CMOS RISC microcontroller from the PIC® 16C family, featuring 3.5KB (2K x 14) of One-Time Programmable (OTP) program memory, 128 bytes of RAM, and 33 digital I/O pins in a 44-pin MQFP (10x10 mm) surface-mount form factor. Operating at a maximum clock speed of 4 MHz from a 5V supply, this device is housed in package variant "PQ" (MQFP-44) and is specified for the extended industrial temperature range (-40C to +125C), as indicated by the "E" designator in the part number suffix.

What is an OTP microcontroller? An OTP (One-Time Programmable) microcontroller is a non-volatile programmable logic device whose on-chip program memory can be written only once after manufacture, typically using an EPROM cell. Once programmed, the firmware is permanent and cannot be erased or rewritten. OTP microcontrollers sit within the broader hierarchy of microcontrollers -> embedded microcontrollers -> 8-bit microcontrollers -> programmable logic devices -> semiconductors. They are commonly used in cost-sensitive, high-volume products where the firmware is finalized before production runs and the lowest unit cost is mandatory.

Key differentiating specifications of the PIC16C64AT-04E/PQ include its 4 MHz maximum operating frequency, 35 single-word RISC instructions, 8-bit architecture with Harvard memory organization, two 8-bit timers plus one 16-bit timer, a 10-bit ADC with up to 8 channels, synchronous serial port (SSP) for SPI/I2C communication, and 33 digital I/O lines supporting direct LED drive. The PIC16C64A core implements a 14-bit instruction word with an 8-bit data path and a hardware stack depth of 8 levels, which is typical of the mid-range PIC16 family.

Architecturally, the PIC16C64A family uses a RISC pipelined Harvard architecture that achieves near single-cycle instruction execution except for program branches, which are two-cycle. The OTP program memory stores the application firmware in 2K words of 14-bit width, while 128 bytes of general-purpose RAM support data and stack use. Integrated brown-out reset, power-on reset, watchdog timer, and an analog comparator make the device self-sufficient for many embedded designs without external supervisory ICs.

Typical applications for the PIC16C64AT-04E/PQ include industrial control systems, appliance controllers, automotive body electronics (with appropriate qualification), low-cost sensor interfaces, LED display drivers, and any high-volume consumer product where OTP programming economics favor one-time code storage over flash-based reprogrammability. Designers often choose this part for legacy designs originally specified around the PIC16C64A family and need a known pin-compatible MCU for production continuity.

A key design consideration when selecting the PIC16C64AT-04E/PQ is the OTP memory constraint: firmware bugs cannot be patched in the field, so code must be fully validated before programming. Developers should use the JW (windowed) or flash-based equivalent (e.g. PIC16F877A) variants for prototyping, then transition to the OTP or QTP parts for production. The extended (-40C to +125C) temperature range suits automotive underhood and industrial environments.

This page synthesizes distributor stock data, parametric cross-references, drop-in alternatives from the same PIC16C64A family, and practical design guidance not aggregated in any single source.

直接替换替代料: PIC16C64AT-04E/PQ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: PIC16C64AT-04E/PQ (相同外形与封装尺寸) ——差异在于 Operating Temperature Range, Timers, Package, Core Architecture, Program Memory Size.

Microchip Technology
Operating Temperature Range: Commercial (0C to +70C) per -04 suffix
Timers: 2x 8-bit + 1x 16-bit timer/counter
Package: 44-MQFP (10x10 mm), PQ suffix
Microchip Technology
Operating Temperature Range: -40C to +125C (extended, "E" grade)
Program Memory Size: 3.5 KB (2K x 14)
Microchip Technology
Operating Temperature Range: -40 C to +85 C (Industrial, 'I' suffix)
Timers: Timer0, Timer1, Timer2 (16-bit + 8-bit + 8-bit)
Package: 40-pin CDIP (Ceramic DIP, windowed), 0.600 inch
Microchip Technology
Timers: 3 (Timer0, Timer1, Timer2)
Package: 44-pin MQFP (PQ), surface mount
Microchip Technology
Timers: 3 (Timer0, Timer1, Timer2 + WDT)
Package: 44-pin MQFP (PQ) 10x10 mm
Core Architecture: PIC16C 8-bit RISC
Microchip Technology
Operating Temperature Range: -40 C to +85 C (industrial)
Timers: 2 x 8-bit Timer/Counter
Package: 44-pin TQFP (PT), 10x10 mm
Microchip Technology
Operating Temperature Range: -40C to +125C (extended)
Package: 44-pin PLCC (J-lead)
Program Memory Size: 3.5 KB (2K x 14)
Microchip Technology
Operating Temperature Range: -40C to +85C (Industrial)
Timers: Timer0, Timer1, Timer2
Package: 44-MQFP (10x10 mm)
Microchip Technology
Operating Temperature Range: -40C to +125C (Extended, 'E' suffix)
Core Architecture: PIC16 (RISC, 14-bit instruction word, Harvard)
Microchip Technology
Operating Temperature Range: -40C to +85C (Industrial)
Timers: 3 (Timer0, Timer1, Timer2)
Core Architecture: PIC16 8-bit RISC

快速对比工具——选择替代料号进行并排对比:

PIC16C64AT-04/PQ

✅ 直接替换
Microchip Technology
📦 44-MQFP (PQ)
PIC16C 8-bit RISC · OTP (One-Time Programmable) EPROM · 3.5 KB (2K x 14 words) · 128 bytes · 4 MHz · 1 us at 4 MHz · 5 V (typical; range per datasheet) · 33

✓ 有现货

$7.1 / 个

查看数据手册 →

PIC16C64AT-04E/L

✅ 直接替换
Microchip Technology
📦 44-MQFP (PQ)
8-bit PIC RISC · PIC16C6X (PIC16C64A) · OTP EPROM · 3.5 KB (2K x 14) · 128 bytes · 33 · 4 MHz · DC to 4 MHz

✓ 有现货

$6.1 / 个

查看数据手册 →

PIC16C64AT-04/PT

✅ 直接替换
Microchip Technology
📦 44-MQFP (PQ)
PIC16CXX · 8-bit PIC RISC · OTP (One-Time Programmable EPROM) · 3.5 KB (2K x 14) · 128 x 8 bytes · 33 · 4 MHz (4 MIPS) · 14 bits

✓ 有现货

$11.4 / 个

查看数据手册 →

PIC16C64A-20I/PQ

✅ 直接替换
Microchip Technology
📦 44-MQFP (PQ)
8-bit RISC (Harvard) · PIC16C6X (35 instructions, 14-bit word) · 3.5 KB · 128 bytes · 33 · 20 MHz · 200 ns · 2.5 V to 6.0 V

✓ 有现货

$12.2 / 个

查看数据手册 →

PIC16C64A-20I/P

✅ 直接替换
Microchip Technology
📦 44-MQFP (PQ)
8-bit PIC16C Harvard RISC, 14-bit instruction word · 35 single-word instructions · 3.5 KB EPROM (windowed, UV-erasable) · 128 bytes · 20 MHz (200 ns instruction cycle) · 2.5 V to 6.0 V (operating); 4.0 V to 5.5 V (5 V typical) · 33 digital I/O

✓ 有现货

$6.65 / 个

查看数据手册 →

PIC16C64A-04/PQ

✅ 直接替换
Microchip Technology
📦 44-MQFP (PQ)
8-Bit Microcontroller (MCU) · PIC16C · 8-bit RISC (Harvard) · 4 MHz · 200 ns · 3.5 KB (2K x 14) OTP · 128 bytes · 33

✓ 有现货

$4.3 / 个

查看数据手册 →

PIC16C64AT-04E/PQ 最大额定值与电气特性

Core Architecture PIC16C 8-bit RISC (Harvard)
Program Memory Size 3.5 KB (2K x 14) OTP
RAM Size 128 bytes (128 x 8)
Number of I/O Pins 33
Maximum Clock Speed 4 MHz
工作电源电压 5 V
封装 / 外壳 44-MQFP (10x10 mm)
Oscillator Type External
数据总线宽度 8 bit
Instruction Set 35 single-word instructions
ADC 8 channels, 8-bit resolution
Timers 2 x 8-bit + 1 x 16-bit
Communication Interfaces SSP (SPI / I2C), USART
工作温度范围 -40C to +125C (Extended, "E")
安装类型 Surface Mount
Packaging Tape & Reel (TR)

PIC16C64AT-04E/PQ 引脚配置

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
引脚 1 OSC1/CLKIN — Oscillator crystal input or external clock input
引脚 2 RA0/AN0 — PORTA bit 0 / Analog input channel 0
引脚 3 RA1/AN1 — PORTA bit 1 / Analog input channel 1
引脚 4 RA2/AN2 — PORTA bit 2 / Analog input channel 2
引脚 5 RA3/AN3/VREF — PORTA bit 3 / Analog input channel 3 / ADC voltage reference
引脚 6 RA4/T0CKI — PORTA bit 4 / Timer 0 clock input
引脚 7 RA5/SS/AN4 — PORTA bit 5 / SSP slave select / Analog input channel 4
引脚 8 VSS — Ground reference
引脚 9 OSC2/CLKOUT — Oscillator crystal output or clock output
引脚 10 RC0/T1OSO/T1CKI — PORTC bit 0 / Timer 1 oscillator output / Timer 1 clock input
引脚 11 RC1/T1OSI/CCP2 — PORTC bit 1 / Timer 1 oscillator input / CCP2 capture/compare/PWM
引脚 12 RC2/CCP1 — PORTC bit 2 / CCP1 capture/compare/PWM
引脚 13 RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock
引脚 14 RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data
引脚 15 RC5/SDO — PORTC bit 5 / SPI data out
引脚 16 RC6/TX/CK — PORTC bit 6 / USART transmit / USART clock
引脚 17 RC7/RX/DT — PORTC bit 7 / USART receive / USART data
引脚 18 VSS — Ground reference
引脚 19 VDD — Positive supply voltage (+5V)
引脚 20 RB0/INT — PORTB bit 0 / External interrupt input
引脚 21 RB1 — PORTB bit 1
引脚 22 RB2 — PORTB bit 2
引脚 23 RB3 — PORTB bit 3
引脚 24 RB4 — PORTB bit 4
引脚 25 RB5 — PORTB bit 5
引脚 26 RB6/PGC — PORTB bit 6 / ICSP clock
引脚 27 RB7/PGD — PORTB bit 7 / ICSP data
引脚 28 VSS — Ground reference
引脚 29 VDD — Positive supply voltage (+5V)
引脚 30 RD0 — PORTD bit 0
引脚 31 RD1 — PORTD bit 1
引脚 32 RD2 — PORTD bit 2
引脚 33 RD3 — PORTD bit 3
引脚 34 RD4 — PORTD bit 4
引脚 35 RD5 — PORTD bit 5
引脚 36 RD6 — PORTD bit 6
引脚 37 RD7 — PORTD bit 7
引脚 38 VSS — Ground reference
引脚 39 VDD — Positive supply voltage (+5V)
引脚 40 RE0/RD — PORTE bit 0 / Parallel slave port read control
引脚 41 RE1/WR — PORTE bit 1 / Parallel slave port write control
引脚 42 RE2/CS — PORTE bit 2 / Parallel slave port chip select
引脚 43 VSS — Ground reference
引脚 44 MCLR/VPP — Master clear reset input / Programming voltage input

典型应用

PIC16C64AT-04E/PQ 适用于 6 应用s: Industrial Control Systems, Appliance Controllers, Automotive Body Electronics (Legacy), Sensor Interface Modules, LED Display Drivers, Consumer Electronics Sub-systems.

🏭

Industrial Control Systems

The PIC16C64AT-04E/PQ fits industrial control applications because its 33 digital I/O lines directly drive relays, solenoids, and indicator LEDs without external buffers, while the integrated 8-channel 8-bit ADC reads sensor signals (temperature, pressure, level) without an external analog front end. With 3.5KB OTP program memory and 4 MHz operation, the device executes scan loops well under 1 ms, satisfying typical PLC response budgets. The extended -40C to +125C temperature range supports factory-floor enclosures, and the on-chip USART plus SSP (SPI/I2C) connect to HMI panels and remote I/O expanders. Designers favor this part for high-volume machinery controllers where the OTP economics outperform flash reprogrammability.

🔧

Appliance Controllers

The PIC16C64AT-04E/PQ is well suited to white-goods and small appliance controllers (washing machines, dishwashers, microwave ovens) where its 33 I/O drive motor triacs, valve solenoids, keypad switches, and seven-segment displays directly. The 3.5KB OTP memory holds motor-state firmware, while the 128-byte RAM supports timing variables and user-mode flags. The on-chip 16-bit timer captures zero-crossing events for triac phase-angle control, and the analog comparator monitors line voltage for brown-out protection. With OTP at production cost below flash parts, manufacturers can ship millions of units at sub-dollar MCU cost without firmware upgrade requirements typical of consumer appliances.

🚗

Automotive Body Electronics (Legacy)

For non-safety automotive body electronics (interior lighting, seat controllers, mirror adjusters), the PIC16C64AT-04E/PQ provides the 33 I/O count and 4 MHz throughput required for module coordination while its extended -40C to +125C temperature range covers cabin and underhood-adjacent locations. Designers integrate the SSP (SPI) to communicate with body control modules and use the USART for LIN-bus side-channel signaling. Note that the part is NOT AEC-Q100 qualified, so it cannot be used in safety-critical or powertrain applications. Engineers maintaining existing designs should validate component-level PPAP documentation before reuse, or migrate to AEC-Q100-qualified PIC16F family successors for new programs.

🧩

Sensor Interface Modules

The PIC16C64AT-04E/PQ acts as a low-cost sensor interface in distributed measurement systems, leveraging its 8-channel 8-bit ADC to digitize multiple analog sensors (thermistors, photocells, strain gauges) sequentially. The integrated USART streams readings over a half-duplex RS-485 link to a host controller, while the SSP (I2C) interfaces to digital temperature sensors and EEPROMs. With 128 bytes of RAM, the device buffers sample sets before transmission, and the watchdog timer resets the MCU on bus-lockup faults. The OTP memory economics suit OEM-volume environmental and process-sensor modules where firmware is locked at production.

💡

LED Display Drivers

Driving multiplexed LED matrices and seven-segment displays is a natural fit for the PIC16C64AT-04E/PQ because its 33 I/O pins can directly sink or source LED segment currents up to 25 mA per pin, eliminating external transistor arrays for small displays. The 16-bit timer generates precise multiplex refresh rates without CPU overhead, and the 4 MHz instruction cycle supports 8-digit scanning at >100 Hz flicker-free rates. The 3.5KB OTP holds lookup tables for character fonts and brightness curves. For production signage and numeric-indicator products, OTP's per-unit cost advantage makes this PIC a long-running industry workhorse.

📱

Consumer Electronics Sub-systems

In high-volume consumer electronics (remote controls, toys, small home appliances), the PIC16C64AT-04E/PQ provides the right balance of cost, capability, and legacy ecosystem. Its 4 MHz performance handles IR protocol encoding/decoding, keypad scanning, and simple audio tone generation, while the 33 I/O drive LCD segments or LED indicators directly. The OTP memory model suits toy and disposable consumer products where firmware is fixed at production and field updates are unnecessary. With extended -40C to +125C temperature range, devices survive shipping containers, attic storage, and outdoor use. Decades of Microchip PIC toolchain maturity (MPLAB, MPASM) lower engineering NRE.

What is the PIC16C64AT-04E/PQ?
The PIC16C64AT-04E/PQ is an 8-bit CMOS OTP microcontroller from Microchip Technology's PIC16C64A family. According to Microchip's PIC16C6X family datasheet (DS30400D), it provides 3.5KB (2K x 14) of OTP program memory, 128 bytes of RAM, 33 I/O pins, and operates up to 4 MHz from a 5V supply in a 44-pin MQFP (PQ) package with extended -40C to +125C temperature range.
How much program memory does the PIC16C64AT-04E/PQ have?
The PIC16C64AT-04E/PQ contains 3.5KB of OTP program memory, organized as 2K words of 14 bits each. This 14-bit instruction width is standard for the PIC16 mid-range family and supports the full 35-instruction RISC instruction set including arithmetic, logic, branch, bit, and literal operations.
What is the difference between PIC16C64AT-04E/PQ and PIC16C64A-04I/PQ?
The PIC16C64AT-04E/PQ is the tape-and-reel (T) packaging variant with extended -40C to +125C temperature grade (E), while the PIC16C64A-04I/PQ is the industrial -40C to +85C temperature grade (I) without tape-and-reel packaging. Both share identical die, memory, peripherals, and 44-MQFP pinout, making them drop-in compatible at the PCB level - the differences are only in operating temperature grade and reel format.
Can the PIC16C64AT-04E/PQ be reprogrammed?
No. The PIC16C64AT-04E/PQ uses One-Time Programmable (OTP) EPROM memory that cannot be erased or rewritten after the initial programming. Once the bit cells are programmed, the firmware is permanent. For development and field-updatable designs, Microchip recommends flash-based equivalents such as the PIC16F877A or windowed (JW) variants of the PIC16C64A family.
Where to buy PIC16C64AT-04E/PQ online?
According to DigiKey's distributor listing (datasheet retrieved 2026-09-17), the PIC16C64AT-04E/PQ is listed as active stock at Hotenda and several authorized distributors including Veswin, Avaq, Lisleapex, and Xecor. Authorized Microchip distributors and brokers carry the part; lead time and pricing as of 2026-09-17 should be confirmed with the supplier at order entry because OTP microcontrollers often have limited inventory.
What is the price of PIC16C64AT-04E/PQ?
As of 2026-09-17, distributor pricing for the PIC16C64AT-04E/PQ is approximately $9.50 unit at qty 1, scaling down to roughly $6.80 at qty 1000. Pricing reflects the part's NRND lifecycle status and limited authorized stock; quote-based pricing may apply at higher volumes. Always confirm current price and lead time directly with the distributor before placing a purchase order.
What is the lead time for PIC16C64AT-04E/PQ?
Lead time for the PIC16C64AT-04E/PQ as of 2026-09-17 typically ranges from stock to 6-12 weeks depending on distributor. Because the part is in Not-Recommended-for-New-Designs (NRND) status, several authorized distributors still carry inventory but production allocations may be limited. For new designs, Microchip recommends migrating to the flash-based PIC16F877A or PIC18F family for long-term availability.
Is the PIC16C64AT-04E/PQ in stock?
Hotenda shows in-stock inventory of the PIC16C64AT-04E/PQ as of 2026-09-17, with multiple brokers (Veswin, Avaq, Lisleapex, Xecor) also advertising stock. However, given its NRND lifecycle status, real-time stock fluctuates daily. Engineers should verify availability at the time of order placement and consider ordering safety stock for production runs.
PIC16C64AT-04E/PQ vs PIC16F877A-I/PQ - which is better for new designs?
The PIC16F877A-I/PQ is the better choice for new designs because it offers flash memory (1,000+ erase/write cycles) instead of one-time-programmable EPROM, identical peripheral set and 40-pin footprint, and active production status. The PIC16C64AT-04E/PQ remains suitable only for legacy designs requiring exact OTP behavior or extended -40C to +125C temperature grade at production cost targets.
When should I choose PIC16C64AT-04E/PQ over PIC16C64A-04/PQ?
Choose the PIC16C64AT-04E/PQ when your application requires the extended -40C to +125C industrial temperature range and tape-and-reel packaging for SMT assembly. Choose the PIC16C64A-04/PQ (no T, no E) for commercial temperature (0C to +70C) and tube packaging used in prototype or through-hole-leaning designs. Both share identical die and pinout.
What is the best drop-in replacement for PIC16C64AT-04E/PQ?
The best drop-in replacement for the PIC16C64AT-04E/PQ is the PIC16C64A-04I/PQ, which shares the identical 44-MQFP package, 33 I/O pinout, 3.5KB OTP program memory, and 4 MHz clock speed, with the only difference being the industrial -40C to +85C temperature grade versus the extended -40C to +125C of the target part. For designs needing field-updatable firmware, the PIC16F877A-I/PQ is the recommended alternative in the same family footprint.
Where to download PIC16C64AT-04E/PQ datasheet PDF?
The official PIC16C64AT-04E/PQ datasheet can be downloaded from Microchip's product documentation portal at https://ww1.microchip.com/downloads/en/devicedoc/30400d.pdf (DS30400D - PIC16C6X Family datasheet, 5 pages of pinout-specific content). Distributor-hosted copies are also available on DigiKey's product page (datasheet retrieved 2026-09-17). The datasheet contains pinout, electrical characteristics, and programming specifications.
Where to find the PIC16C64AT-04E/PQ pinout?
The PIC16C64AT-04E/PQ pinout is documented in the PIC16C6X family datasheet (DS30400D), available from Microchip at https://ww1.microchip.com/downloads/en/devicedoc/30400d.pdf. The 44-MQFP package assigns pins for PORTA through PORTE, the MCLR reset input, the two VDD/VSS power pairs, and the OSC1/OSC2 oscillator connections. The same pinout applies to all PIC16C64A 44-MQFP variants.
What are the key specifications of PIC16C64AT-04E/PQ that engineers should know?
The PIC16C64AT-04E/PQ delivers 3.5KB (2K x 14) of OTP program memory, 128 bytes of RAM, 33 I/O pins, 8-channel 8-bit ADC, USART plus SSP (SPI/I2C), 3 timers, and operates at 4 MHz from 5V across -40C to +125C. Its RISC core executes 35 instructions in one cycle (two for branches). Engineers should plan for OTP's single-write constraint by validating firmware on a windowed (JW) or flash (PIC16F877A) equivalent before committing to production programming.

工程参考数据: PIC16C64AT-04E/PQ ——对比、设计指导和合规信息。

选型指南

Choose PIC16C64AT-04E/PQ for production runs of legacy designs requiring 3.5KB OTP program memory, 4 MHz performance, and the extended -40C to +125C temperature grade. For new designs, prefer the flash-based PIC16F877A family for field reprogrammability. If the application requires higher throughput without layout changes, the PIC16C64A-20I/PQ in the same 44-MQFP PQ footprint delivers 20 MHz performance (5x). For commercial-temperature indoor applications, the PIC16C64A-04/PQ offers the same die at lower cost. All candidates retain the PIC16C64A peripheral set (ADC, USART, SSP, timers) and Microchip MPLAB toolchain support.

与替代料对比

参数 本产品 PIC16C64AT-04/PQ PIC16C64A-04/PQ PIC16C64A-20I/PQ PIC16C64A-04I/PQ
Package 44-MQFP (PQ) 44-MQFP (PQ) - same 44-MQFP (PQ) - same 44-MQFP (PQ) - same 44-MQFP (PQ) - same
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Maximum Clock Speed 4 MHz 4 MHz 4 MHz 20 MHz 4 MHz
Program Memory 3.5 KB OTP 3.5 KB OTP 3.5 KB OTP 3.5 KB OTP 3.5 KB OTP
RAM Size 128 bytes 128 bytes 128 bytes 128 bytes 128 bytes
Number of I/O 33 33 33 33 33
Temperature Range -40C to +125C (Extended) 0C to +70C (Commercial) 0C to +70C (Commercial) -40C to +85C (Industrial) -40C to +85C (Industrial)
Packaging Format Tape & Reel (TR) Tube Tube Tube Tube
Lifecycle Status NRND NRND NRND NRND NRND

关键差异点

  • Extended temperature grade with tape-and-reel format (对比 PIC16C64AT-04/PQ)
  • Five times faster clock option available (对比 PIC16C64A-04I/PQ)
  • Same package footprint across the entire PIC16C64A family (对比 PIC16C642-04I/SO)

设计说明

OTP memory cannot be reprogrammed: validate the entire firmware on a windowed (JW) or flash-based PIC16F877A equivalent before committing production code. Once a PIC16C64AT-04E/PQ is programmed, firmware bugs cannot be patched and the device must be discarded. Establish a controlled firmware-build process with golden-image verification to prevent production scrap.

Place the 44-MQFP decoupling directly across the VDD/VSS pairs (pins 19/18, 29/28, 39/38) with 100 nF X7R ceramic capacitors within 5 mm of each pair, plus a single 10 uF tantalum or aluminum polymer bulk capacitor at the package entry. Route the MCLR/VPP line with a 10 kohm pull-up to VDD and add a 100 nF capacitor to ground for noise immunity. Keep the OSC1/OSC2 traces short and symmetric; use a guard ground around the crystal to reduce EMI coupling into the ADC analog inputs.

The PIC16C64AT-04E/PQ draws low supply current (typically under 25 mA active at 4 MHz, microamps in sleep) and produces minimal self-heating even at the extended 125C junction limit. Standard MQFP-44 thermal resistance theta_JA is approximately 50-60 C/W on a 4-layer JEDEC test board, which is more than adequate. Estimated: at 5V VDD and 20 mA active ICC, internal dissipation is approximately 0.10 W, well within the thermal envelope for the 44-MQFP package even without a dedicated thermal copper pour.

Use the PIC16C64A built-in brown-out reset (BOR) and power-on reset (POR) to ensure deterministic startup; configure BOR voltage via configuration bits for 4.5V or 4.0V thresholds. Place the MCU in sleep mode with the watchdog timer enabled for battery-backed sensor applications; wake on watchdog timeout or external interrupt (RB0/INT). Estimated: in sleep mode the device typically draws under 1 uA at 5V, enabling multi-year battery life on a 200 mAh coin cell.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals status not specified in the verified web data; consult Microchip product compliance documentation for definitive certification data. The PIC16C64AT-04E/PQ is NOT AEC-Q100 qualified and is not recommended for new automotive designs.

数据核验日期: 2026-09-17 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

PIC16C64AT-04E/PQ PIC16C64AT-04E/PQ datasheet Microchip PIC16C64A 44-MQFP PIC16C64A OTP 4MHz 5V 33 I/O PIC16C64AT-04E/PQ MQFP PQ package PIC16C64A industrial controller microcontroller PIC16C64AT-04E/PQ vs PIC16F877A PIC16C64A drop-in replacement buy PIC16C64AT-04E/PQ PIC16C64A OTP pinout 44-pin QFP PIC16C64AT-04E/PQ equivalent Microchip what is an OTP microcontroller PIC16C64A price lead time distributor PIC16C64AT-04E temperature range extended PIC16C64A legacy design migration

相关元器件 & 术语

Microchip Technology PIC16C64AT-04E/PQ PIC16C64AT-04/PQ PIC16C64A-04/PQ PIC16C64A-20I/PQ PIC16C64A-04I/PQ PIC16F877A PIC microcontroller 8-bit microcontroller RISC architecture Harvard architecture OTP (One-Time Programmable) EPROM 44-MQFP package TQFP-44 PLCC-44 DIP-40 ADC USART SSP (Synchronous Serial Port) SPI I2C MPLAB RoHS AEC-Q100 industrial temperature grade extended temperature grade brown-out reset watchdog timer legacy embedded design
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
合计: $0.00 USD
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情