Microchip Technology

PIC16C65AT-20I/PT - 8-Bit OTP MCU, 7KB, 33 I/O | Microchip

料号: PIC16C65AT-20I/PT ✗ 停产
有现货 1-3 个工作日内发货
44-pin TQFP (PT), 10x10 mm Package 20 MHz Speed OTP (One-Time Programmable) Memory
低至 $7.1 USD / 件
最小起订量: 1 |
价格更新于: 2026-09-17
批量定价
数量 单价 小计
1 $12.5 $12.50
10 $11.2 $112.00
100 $9.85 $985.00
500 $8.4 $4,200.00
1,000 $7.1 $7,100.00
ℹ️ 所有价格均以 USD 计价

PIC16C65AT-20I/PT 概述

The Microchip PIC16C65AT-20I/PT is an 8-bit CMOS OTP (One-Time Programmable) microcontroller from the PIC16C6X family, offering 7 KB (4K x 14 words) of program memory and 192 bytes of RAM in a 44-pin TQFP package. The device operates at up to 20 MHz clock input, features 33 digital I/O pins, and integrates peripheral modules including two 8-bit timers, one 16-bit timer, a USART, an SSP, an 8-bit parallel slave port, and an 8-channel 8-bit A/D converter.

A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (ROM/RAM), and programmable I/O peripherals. The PIC16C65A belongs to the mid-range PIC family, sitting in the taxonomy of microcontrollers -> embedded controllers -> microprocessors -> semiconductors. OTP memory is field-programmable but not erasable, making the PIC16C65A well-suited for low-cost production runs where firmware stability is verified before mask programming.

Key features include Harvard architecture with separate program and data buses, 35 single-word RISC instructions, DC to 20 MHz operating speed, and an industrial-grade -40C to +85C operating temperature range (the "/I" suffix). Power management is handled via SLEEP mode with multiple wake-up sources. The 44-pin TQFP (PT) package provides a compact 10 mm x 10 mm footprint suitable for space-constrained designs.

Typical applications include industrial control logic, motor control front-ends, sensor interfacing boards, HVAC controls, automotive body electronics (non-safety), and embedded instrumentation. The integrated A/D converter and USART simplify designs that previously required external glue logic.

When designing with this part, account for OTP memory limitations - firmware must be fully validated before programming because the device cannot be re-programmed. Use the parallel slave port for high-speed data acquisition and the USART for asynchronous serial communication with a host processor.

直接替换替代料: PIC16C65AT-20I/PT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: PIC16C65AT-20I/PT (相同外形与封装尺寸) ——差异在于 Core Architecture, RAM Size, Program Memory Size, Program Memory Type, ADC.

Microchip Technology
RAM Size: 192 x 8 (192 bytes)
Program Memory Size: 7 KB (4K x 14)
Program Memory Type: OTP (One-Time Programmable EPROM)
Microchip Technology
Core Architecture: PIC 8-bit Mid-range
RAM Size: 192 x 8 bytes (192 B)
Program Memory Size: 7 KB (4K x 14)
Microchip Technology
Core Architecture: PIC16C (8-bit RISC, Harvard)
RAM Size: 192 bytes
Program Memory Size: 7 KB (4K x 14) OTP EPROM
Microchip Technology
Core Architecture: PIC® 8-bit mid-range RISC (Harvard)
ADC: 10-bit, up to 8 channels

快速对比工具——选择替代料号进行并排对比:

PIC16F877A-I/PT

✅ 直接替换
Microchip Technology
📦 44-pin TQFP (PT)
PIC® 8-bit mid-range RISC (Harvard) · 14 KB (8K x 14 words) · 368 bytes · 256 bytes · 20 MHz · 200 ns (single-cycle) · 2.0 V to 5.5 V · 33 digital

✓ 有现货

$4.95 / 个

查看数据手册 →

PIC16C65A-20I/PT

✅ 直接替换
📦 44-pin TQFP (PT)
non-T tape and reel, same die, same OTP memory and pinout

📋 参考替代料(不在目录中)

PIC16C65AT-20/PT

✅ 直接替换 ⚠️ 规格未核验
Microchip Technology
📦 44-pin TQFP (PT)
PIC · 8-bit · OTP (One-Time Programmable EPROM) · 7 KB (4K x 14) · 192 x 8 (192 bytes) · 33 · 20 MHz · 4 MHz

✓ 有现货

$9.25 / 个

查看数据手册 →

PIC16C65AT-20E/PT

✅ 直接替换
Microchip Technology
📦 44-pin TQFP (PT)
PIC 8-bit Mid-range · OTP (One-Time Programmable) · 7 KB (4K x 14) · 192 x 8 bytes (192 B) · 20 MHz · 4.0 V to 6.0 V · -40C to +125C (Extended, 'E' grade) · 33

✓ 有现货

$5.48 / 个

查看数据手册 →

PIC16F874A-I/PT

✅ 直接替换 ⚠️ 规格未核验
📦 44-pin TQFP (PT)
flash memory (7 KB), 33 I/O, same TQFP-44 package footprint

📋 参考替代料(不在目录中)

PIC16C65B-20I/PT

✅ 直接替换 ⚠️ 规格未核验
Microchip Technology
📦 44-pin TQFP (PT)
PIC16C (8-bit RISC, Harvard) · 14-bit · 20 MHz · 200 ns (4 x clock period) · 7 KB (4K x 14) OTP EPROM · 192 bytes · 33 · 8 channels x 8-bit

✓ 有现货

$6.2 / 个

查看数据手册 →

PIC16C65AT-20I/PT 最大额定值与电气特性

Core Architecture 8-bit PIC mid-range
Family PIC16C6X
Program Memory Type OTP (One-Time Programmable)
Program Memory Size 7 KB (4K x 14 words)
RAM Size 192 x 8 bytes
Number of I/O 33
最大时钟频率 20 MHz
Instruction Set 35 single-word RISC instructions
ADC 8-bit, 8 channels
Timers 2 x 8-bit, 1 x 16-bit
Communication USART, SSP (SPI/I2C)
Parallel Slave Port 8-bit
工作温度 -40C to +85C (industrial)
封装 44-pin TQFP (PT), 10x10 mm
安装类型 Surface Mount

PIC16C65AT-20I/PT 44-pin tqfp (pt), 10x10 mm 引脚配置指南

PIC16C65AT-20I/PT(44-pin tqfp (pt), 10x10 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

PIC16C65AT-20I/PT 的 44-pin tqfp (pt), 10x10 mm 封装引脚图

暂无详细引脚数据: PIC16C65AT-20I/PT.

请参阅 数据手册 以查看完整引脚配置。

典型应用

PIC16C65AT-20I/PT 适用于 6 应用s: Industrial Control Logic, Motor Control Front-End, HVAC Control Systems, Sensor Interfacing Boards, Automotive Body Electronics, Embedded Instrumentation.

🏭

Industrial Control Logic

The PIC16C65AT-20I/PT fits industrial control logic boards because its 33 I/O pins, 8-channel 8-bit ADC, and 20 MHz RISC core handle multiple sensor inputs and actuator outputs in a single chip. The integrated USART and SSP enable networking with industrial protocols like Modbus RTU. Industrial temperature grade (-40C to +85C) suits factory floor environments.

🏭

Motor Control Front-End

The PIC16C65AT-20I/PT drives motor control front-ends with its Timer1 (16-bit) module for precise PWM generation and 8-bit ADC for current sensing feedback. The 44-pin TQFP package provides ample I/O for multiple MOSFET gate drivers, encoder inputs, and fault detection signals. The /I suffix ensures operation in motor-drive ambient temperatures.

🏭

HVAC Control Systems

The PIC16C65AT-20I/PT is suitable for HVAC control boards, reading temperature sensors via its 8-channel ADC and driving relays, fan controls, and valve actuators through its 33 I/O pins. The USART interfaces with display modules and remote thermostats. The wide industrial temperature range supports attic and outdoor HVAC equipment.

🧩

Sensor Interfacing Boards

The PIC16C65AT-20I/PT serves as the main processor in sensor interfacing boards where its integrated 8-bit ADC, multiple timers, and SSP/I2C peripherals simplify designs. The 7 KB OTP memory fits deterministic sensor processing firmware. Parallel slave port enables fast data transfer to host processors in data acquisition systems.

🚗

Automotive Body Electronics

The PIC16C65AT-20I/PT is used in non-safety automotive body modules like seat controllers, mirror adjusters, and lighting controllers where its -40C to +85C operating range covers automotive cabin temperatures. The OTP memory prevents unauthorized firmware tampering. The 33 I/O pins support multiple switch inputs and PWM-controlled loads.

🔧

Embedded Instrumentation

The PIC16C65AT-20I/PT powers embedded instrumentation such as digital panel meters, data loggers, and bench instruments. Its USART provides serial data output to PCs, the ADC reads measurement signals, and the parallel slave port enables high-speed parallel data capture. The 20 MHz instruction rate supports real-time DSP-like filtering routines.

推荐产品汇总

PIC16F877A-I/PT Microchip Technology 用于: Industrial Control Logic MCP2551 CAN transceiver for industrial networking 用于: Industrial Control Logic MCP3201 External 12-bit ADC for precision analog inputs 用于: Industrial Control Logic IR2104 Half-bridge gate driver for motor control 用于: Motor Control Front-End ACS712 Allegro MicroSystems 用于: Motor Control Front-End DS18B20 Digital temperature sensor for HVAC feedback 用于: HVAC Control Systems MCP23017 I/O expander for additional relay control 用于: HVAC Control Systems MCP9808 High-accuracy I2C temperature sensor 用于: Sensor Interfacing Boards BMP280 I2C pressure and temperature sensor 用于: Sensor Interfacing Boards MC33886 H-bridge driver for seat/mirror motors 用于: Automotive Body Electronics TJA1050 NXP Semiconductors 用于: Automotive Body Electronics MCP4725 DAC for analog signal generation 用于: Embedded Instrumentation MAX232 RS-232 line driver for PC communication 用于: Embedded Instrumentation
What is the program memory size of PIC16C65AT-20I/PT?
The PIC16C65AT-20I/PT contains 7 KB (4K x 14 words) of OTP program memory. According to the Microchip datasheet (DS30234D), this memory is one-time programmable and cannot be erased or rewritten. Engineers must fully validate firmware before programming the device in production.
Is PIC16C65AT-20I/PT still in production or obsolete?
The PIC16C65AT-20I/PT is currently classified as obsolete by Microchip. The OTP-based PIC16C6X family has been superseded by flash-based successors such as PIC16F877A. Designers building new products should use flash-based equivalents; this part remains available through authorized distributors stocking legacy inventory.
What is the difference between PIC16C65A and PIC16C65B?
The PIC16C65A and PIC16C65B are revisions of the same PIC16C65 family. The 'B' revision corrected silicon errata present in the 'A' version while maintaining identical pinout, package options, and core architecture. Both parts share the same datasheet (DS30234D) which documents errata revisions.
Where can I download the PIC16C65AT-20I/PT datasheet PDF?
The official PIC16C65A datasheet (document number DS30234D) is available on Microchip's website at the product documentation page. The same datasheet covers the entire PIC16C65 family including the /PT TQFP package variant, errata revisions, electrical characteristics, and programming specifications.
Can I use PIC16C65AT-20I/PT for new designs?
For new designs, the PIC16C65AT-20I/PT is not recommended due to its obsolete status and OTP memory limitation. Consider the PIC16F877A-I/PT as a flash-based drop-in alternative with the same 40/44-pin pinout and similar peripheral set, available in the same TQFP package footprint.
What package does PIC16C65AT-20I/PT use?
The PIC16C65AT-20I/PT comes in a 44-pin TQFP (Thin Quad Flat Pack) package, denoted by the /PT suffix. This surface-mount package measures approximately 10 mm x 10 mm with a 0.8 mm lead pitch and is compatible with standard reflow soldering processes.
How much RAM does PIC16C65AT-20I/PT have?
The PIC16C65AT-20I/PT includes 192 bytes of RAM (data memory), organized as 192 x 8 bits. This RAM is used for general-purpose variables, stack operations, and register-mapped peripheral control. For larger data storage requirements, external memory must be added via the parallel slave port.
What peripherals are integrated in PIC16C65AT-20I/PT?
The PIC16C65AT-20I/PT integrates two 8-bit timers (Timer0, Timer2), one 16-bit timer (Timer1), a USART for asynchronous serial communication, an SSP module supporting SPI and I2C, an 8-bit parallel slave port, and an 8-channel 8-bit A/D converter. This integrated peripheral set reduces external component count.
What is the maximum clock frequency of PIC16C65AT-20I/PT?
The PIC16C65AT-20I/PT operates at a maximum clock frequency of 20 MHz, as indicated by the -20 speed suffix. At 20 MHz, each instruction cycle is 200 ns, with most instructions executing in a single cycle. Branch instructions take two cycles (400 ns). DC operation is supported when the oscillator is stopped.
What is the operating temperature range of PIC16C65AT-20I/PT?
The PIC16C65AT-20I/PT operates from -40C to +85C as indicated by the /I industrial temperature suffix. This range suits most industrial, consumer, and non-safety automotive applications. For military temperature range (-55C to +125C), refer to the PIC16C65AT-20I variant ordering codes.
Where to buy PIC16C65AT-20I/PT online?
The PIC16C65AT-20I/PT is available from authorized distributors carrying legacy Microchip inventory, including specialist obsolete-component suppliers. As of 2026-09-18, Octopart aggregates availability from 2 distributors. Stock is limited due to obsolete status - confirm lead time before placing production orders.
What is the price of PIC16C65AT-20I/PT?
The PIC16C65AT-20I/PT unit price starts around 12.50 USD at qty 1 as of 2026-09-18, with volume pricing dropping to approximately 7.10 USD at qty 1000. Obsolete parts typically carry premium pricing and minimum order quantities. Contact distributors directly for current quotes and franchise sourcing.
What is the best drop-in replacement for PIC16C65AT-20I/PT?
The recommended drop-in replacement for PIC16C65AT-20I/PT is the PIC16F877A-I/PT, which uses flash memory instead of OTP, allowing re-programming during development. The PIC16F877A shares the same 44-pin TQFP footprint and is software-compatible with minimal code adjustments, making it the best path for legacy designs.
How does PIC16C65AT-20I/PT compare to PIC16F877A-I/PT?
The PIC16C65AT-20I/PT uses 7 KB OTP memory at 20 MHz, while the PIC16F877A-I/PT uses 14 KB flash memory also at 20 MHz with the same 44-pin TQFP package. The PIC16F877A offers twice the program memory, supports in-circuit serial programming, and is actively in production. Choose PIC16F877A for new designs.
What is the A/D converter specification of PIC16C65AT-20I/PT?
The PIC16C65AT-20I/PT includes an 8-bit successive approximation A/D converter with 8 input channels multiplexed from the PORTA and PORTE pins. The ADC supports reference voltages from Vdd down to 0V, and conversion is performed in approximately 20 us. This is sufficient for low-speed sensor monitoring applications.

工程参考数据: PIC16C65AT-20I/PT ——对比、设计指导和合规信息。

选型指南

Choose PIC16C65AT-20I/PT for legacy maintenance, repair, and low-cost high-volume production where firmware is locked and verified, and where industrial temperature range is required. Avoid this part for new designs - prefer PIC16F877A-I/PT (flash, same package, double memory, active lifecycle). Choose PIC16C65AT-20E/PT for extended temperature applications (-40C to +125C). For development and prototyping, PIC16F877A-I/PT is strongly recommended because OTP memory cannot be re-programmed. All listed alternatives share the 44-pin TQFP (PT) footprint, allowing PCB layout reuse across the family.

与替代料对比

参数 本产品 PIC16F877A-I/PT PIC16C65A-20I/PT PIC16C65AT-20E/PT PIC16F874A-I/PT PIC16C65B-20I/PT
Package 44-pin TQFP (PT) 44-pin TQFP (PT) - same 44-pin TQFP (PT) - same 44-pin TQFP (PT) - same 44-pin TQFP (PT) - same 44-pin TQFP (PT) - same
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Program Memory Size 7 KB OTP 14 KB Flash 7 KB OTP 7 KB OTP 7 KB Flash 7 KB OTP
Program Memory Type OTP Flash (re-programmable) OTP OTP Flash (re-programmable) OTP
RAM Size 192 bytes 368 bytes 192 bytes 192 bytes 192 bytes 192 bytes
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
Operating Temperature -40C to +85C (industrial) -40C to +85C -40C to +85C -40C to +125C (extended) -40C to +85C -40C to +85C
Lifecycle Status Obsolete Active Obsolete Obsolete Active Obsolete

关键差异点

  • Lower cost vs flash-based equivalent (对比 PIC16F877A-I/PT)
  • Industrial temperature range standard (对比 PIC16C65AT-20/PT)
  • Drop-in compatible flash replacement available (对比 PIC16F877A-I/PT)

设计说明

OTP (One-Time Programmable) memory cannot be erased or rewritten. Once the PIC16C65AT-20I/PT is programmed, the firmware is permanent. Engineers must fully verify firmware on a flash-based development equivalent (e.g., PIC16F877A) before programming production units. Misprogramming results in scrapped parts and significant cost.

The PIC16C65AT-20I/PT requires stable Vdd decoupling. Place a 100 nF ceramic capacitor as close as possible to each Vdd/Vss pin pair, plus a bulk 10 uF tantalum or electrolytic capacitor on the main supply rail. Brown-out detection must be enabled in the configuration word to prevent code corruption during supply dips below the operating threshold.

The 44-pin TQFP (PT) package has a 0.8 mm lead pitch requiring careful PCB layout. Use 4 mil trace/space rules minimum, and consider micro-via fanouts for inner pads. The exposed thermal pad (if present in this package variant) should be soldered to a copper pour to improve thermal dissipation, although the PIC16C65A has modest power consumption.

The PIC16C65AT-20I/PT oscillator circuit is sensitive to noise and capacitive loading. Use a crystal with the load capacitance specified in the datasheet (typically 15-33 pF) and place the crystal within 5 mm of the OSC1/OSC2 pins. For high-noise environments (motor control), use a 4-layer PCB with a dedicated ground plane beneath the oscillator traces.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Compliant

Compliance status not explicitly stated in verified data. PIC16C6X OTP family pre-dates widespread RoHS compliance documentation. Marked [DATA_NEEDED] in specs.

数据核验日期: 2026-09-18 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

PIC16C65AT-20I/PT PIC16C65AT-20I/PT datasheet PIC16C65A datasheet DS30234D PIC16C65 OTP 7KB microcontroller TQFP 44-pin TQFP PIC microcontroller PIC16C65AT industrial control application PIC16C65AT vs PIC16F877A PIC16C65AT drop-in replacement PIC16C65AT-20I/PT buy price obsolete PIC16C65 alternative flash Microchip PIC16C65 pinout 8-bit MCU OTP 33 I/O industrial

相关元器件 & 术语

Microchip Technology PIC16C65AT-20I/PT PIC16F877A-I/PT PIC16F874A-I/PT PIC16C65B-20I/PT OTP (One-Time Programmable) Flash memory 8-bit microcontroller PIC16C6X family TQFP-44 TQFP package surface mount RISC architecture USART SSP (SPI/I2C) 8-bit ADC Harvard architecture industrial temperature range RoHS AEC-Q100 parallel slave port
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
合计: $0.00 USD
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情