PIC16F19175T-I/MV - 32MHz 8-Bit XLP MCU 14KB Flash LCD | Microchip
料号： PIC16F19175T-I/MV ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $1.62 | $1.62 |
| 10 | $1.49 | $14.90 |
| 100 | $1.31 | $131.00 |
| 500 | $1.14 | $570.00 |
| 1,000 | $0.98 | $980.00 |
| 3,300 | $0.78 | $2,574.00 |
PIC16F19175T-I/MV 概述
An 8-bit microcontroller (MCU) is a programmable logic device that executes instructions from internal Flash memory at a clock rate up to 32MHz. The PIC16F19175T-I/MV sits within the broader hierarchy of microcontrollers -> 8-bit MCUs -> PIC microcontrollers -> XLP (eXtreme Low Power) family -> power management MCUs. Its integrated charge pump and LCD drive enable glass bias generation without external DC-DC circuitry, while XLP technology delivers sub-µA sleep currents for battery longevity.
Key differentiating features include 35 high-current I/O pins, a 12-bit ADC² (Analog-to-Digital Converter with Computation), a 5-bit DAC, low-power comparators (LP COMP), PWM, CCP, CWG, SMT, ZCD, and PPS (Peripheral Pin Select). The integrated LCD driver supports up to 280 segments, and the eXtreme Low Power (XLP) architecture delivers typical sleep currents in the nanoamp range, enabling years of operation from a single coin cell. The 12-bit ADC² autonomously performs signal conditioning such as averaging and threshold comparisons without CPU intervention.
Architecturally, the device uses an enhanced mid-range 8-bit CPU core with a hardware multiplier, 14-bit instruction word, and 16-level hardware stack, allowing deterministic interrupt response and predictable real-time behavior. The integrated charge pump generates the VPP LCD bias voltage from a low-voltage source, eliminating an external boost circuit. Combined with PPS routing and Core Independent Peripherals, the chip dramatically reduces firmware complexity and BOM cost.
Typical applications include battery-powered LCD meters and thermostats, IoT sensor nodes with displays, portable medical devices (glucometers, pulse oximeters), consumer appliances with segment displays, and industrial HMIs. The PIC16F19175T-I/MV is the tape-and-reel variant; the PIC16F19175-I/MV is the tray variant. Designers should also consider the pin-compatible PIC16F19155 (less Flash/RAM) and PIC16F19176 (more Flash) for memory scaling within the same package.
For PCB layout, place a 0.1µF decoupling capacitor as close as possible to each VDD pin and bond the exposed pad (EP) to a continuous ground plane for thermal dissipation. Program/debug is supported via ICSP™ on RA0/RA1, and the PPS system allows most digital peripherals to be reassigned to multiple I/O pins for flexible board routing.
This page synthesizes Microchip datasheet specifications, current distributor pricing, verified drop-in same-family alternatives, and practical design notes that go beyond the manufacturer datasheet, providing an engineering-grade reference for the PIC16F19175T-I/MV.
直接替换替代料： PIC16F19175T-I/MV ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PIC16F19175T-I/MV （相同外形与封装尺寸） ——差异在于 I/O Pins, Package, Comparators, LCD Driver, Operating Voltage Range.
快速对比工具——选择替代料号进行并排对比：
PIC16F19175-I/MV
✅ 直接替换✓ 有现货
$1.62 / 个
查看数据手册 →PIC16F19176T-I/MV
✅ 直接替换✓ 有现货
$1.78 / 个
查看数据手册 →PIC16F19155T-I/MV
✅ 直接替换✓ 有现货
$1.32 / 个
查看数据手册 →PIC16F19185T-I/MV
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$1.52 / 个
查看数据手册 →PIC16F19175-E/MV
✅ 直接替换✓ 有现货
$1.78 / 个
查看数据手册 →PIC16F19175T-I/MV 最大额定值与电气特性
| Product Family | PIC® XLP™ 16F |
| Core Architecture | 8-bit PIC RISC, enhanced mid-range |
| Program Memory (Flash) | 14 KB (8K x 14 words) |
| Data SRAM | 1 KB |
| Data EEPROM | 256 bytes |
| Maximum CPU Speed | 32 MHz |
| Operating Voltage Range | 2.3V to 5.5V |
| I/O Pins | 35 |
| ADC | 12-bit ADC² (with computation) |
| DAC | 5-bit DAC |
| Comparators | Low-power comparators |
| LCD Driver | Integrated with charge pump, up to 280 segments |
| Timers / PWM / CCP / CWG / SMT / ZCD | Yes |
| Peripheral Pin Select (PPS) | Yes |
| 封装 | 40-pin UQFN (5x5 mm) with EP |
| 安装类型 | Surface Mount |
| 工作温度范围 | -40°C to +85°C (Industrial) |
| Program Memory Type | Flash |
| Connectivity | I²C, SPI, UART, LIN |
| RoHS 状态 | Compliant |
PIC16F19175T-I/MV 引脚配置
| 引脚 1 | RA0/ICSPDAT — Bidirectional I/O; ICSP data; analog input |
| 引脚 2 | RA1/ICSPCLK — Bidirectional I/O; ICSP clock; analog input |
| 引脚 3 | RA2 — Bidirectional I/O; analog input |
| 引脚 4 | RA3 — Bidirectional I/O; analog input |
| 引脚 5 | RA4 — Bidirectional I/O; analog input |
| 引脚 6 | RA5 — Bidirectional I/O; analog input |
| 引脚 7 | RA6 — Bidirectional I/O; analog input |
| 引脚 8 | RA7 — Bidirectional I/O; analog input |
| 引脚 9 | RB0 — Bidirectional I/O; LCD segment |
| 引脚 10 | RB1 — Bidirectional I/O; LCD segment |
| 引脚 11 | VDD — Positive supply voltage |
| 引脚 12 | VSS — Ground reference |
| 引脚 13 | RB2 — Bidirectional I/O; LCD segment |
| 引脚 14 | RB3 — Bidirectional I/O; LCD segment |
| 引脚 15 | RB4 — Bidirectional I/O; LCD segment |
| 引脚 16 | RB5 — Bidirectional I/O; LCD segment |
| 引脚 17 | RB6 — Bidirectional I/O; ICD/debug |
| 引脚 18 | RB7 — Bidirectional I/O; ICD/debug |
| 引脚 19 | RC0 — Bidirectional I/O; LCD segment |
| 引脚 20 | RC1 — Bidirectional I/O; LCD segment |
| 引脚 21 | RC2 — Bidirectional I/O; LCD segment |
| 引脚 22 | RC3 — Bidirectional I/O; LCD segment |
| 引脚 23 | RC4 — Bidirectional I/O; LCD segment |
| 引脚 24 | RC5 — Bidirectional I/O; LCD segment |
| 引脚 25 | RC6 — Bidirectional I/O; LCD segment |
| 引脚 26 | RC7 — Bidirectional I/O; LCD segment |
| 引脚 27 | VDD — Positive supply voltage |
| 引脚 28 | VSS — Ground reference |
| 引脚 29 | RD0 — Bidirectional I/O; LCD segment |
| 引脚 30 | RD1 — Bidirectional I/O; LCD segment |
| 引脚 31 | RD2 — Bidirectional I/O; LCD segment |
| 引脚 32 | RD3 — Bidirectional I/O; LCD segment |
| 引脚 33 | RD4 — Bidirectional I/O; LCD segment |
| 引脚 34 | RD5 — Bidirectional I/O; LCD segment |
| 引脚 35 | RD6 — Bidirectional I/O; LCD segment |
| 引脚 36 | RD7 — Bidirectional I/O; LCD segment |
| 引脚 37 | RE0 — Bidirectional I/O; LCD segment |
| 引脚 38 | RE1 — Bidirectional I/O; LCD segment |
| 引脚 39 | RE2 — Bidirectional I/O; LCD segment |
| 引脚 40 | VDD — Positive supply voltage |
| 引脚 EP | EP — Exposed thermal pad; must be soldered to ground for thermal dissipation |
典型应用
PIC16F19175T-I/MV 适用于 7 应用s: Battery-Powered LCD Meter / Thermostat, Portable Medical Devices (Glucometer / Pulse Oximeter), IoT Sensor Node with Segment Display, Consumer Appliance HMI with Segment LCD, Industrial HMI / Process Indicator, Smart Home Wall Thermostat / Climate Controller, Automotive Accessory Display (Non-Safety).
Battery-Powered LCD Meter / Thermostat
The PIC16F19175T-I/MV is purpose-built for battery-powered segment LCD meters and thermostats. Its integrated LCD driver with charge pump supports up to 280 segments (1/4 duty, 1/3 bias) without external DC-DC bias circuitry, eliminating an entire boost converter from the BOM. The XLP architecture delivers typical sleep currents in the nanoamp range, enabling multi-year operation from a CR2032 coin cell. With 14KB Flash and 1KB SRAM, the device has ample headroom for thermocouple linearization routines, custom LCD glyph tables, and BLE/Zigbee stack fragments. The 12-bit ADC² performs autonomous oversampling and threshold detection, waking the CPU only when needed.
推荐
Portable Medical Devices (Glucometer / Pulse Oximeter)
The PIC16F19175T-I/MV is well suited to portable medical diagnostics such as glucometers and pulse-oximeter finger probes. Its 12-bit ADC² supports accurate electrochemical-strip readout, the 5-bit DAC provides bias generation for the optical sensor, and the integrated LCD driver displays measurement results directly on a segment glass without external bias hardware. XLP technology enables the device to idle at nanoamp currents between measurements, extending battery life across the multi-thousand-measurement lifetime typical of disposable medical form factors. The 32MHz core executes electrochemical algorithms quickly, keeping measurement latency below one second.
推荐
IoT Sensor Node with Segment Display
The PIC16F19175T-I/MV anchors IoT sensor nodes that must show numeric or alphanumeric status on a low-power segment LCD. Its PPS (Peripheral Pin Select) flexibility allows UART, I²C, and SPI to be remapped across the 35-pin GPIO bank, simplifying PCB routing of the wireless module. XLP nanoamp sleep current plus a quick 32MHz wake-up minimize average power for battery-driven wireless sensors (LoRa, sub-GHz, BLE modules). The 12-bit ADC² handles analog sensor channels autonomously with averaging, freeing the CPU for radio stack tasks.
推荐
Consumer Appliance HMI with Segment LCD
The PIC16F19175T-I/MV drives segment-LCD user interfaces in white goods such as washing machines, dishwashers, microwave ovens, and air-conditioner control panels. The integrated LCD charge pump supports 5V LCD glass directly from a 3.3V supply, eliminating external inverter components and saving PCB area. The hardware multiplier and 32MHz core execute control-loop math in real time, while the eXtreme Low Power (XLP) mode retains RAM during standby, allowing instant wake-up for button presses. The ZCD (Zero-Cross Detect) and PWM peripherals provide dimming and motor-control support.
推荐
Industrial HMI / Process Indicator
The PIC16F19175T-I/MV is appropriate for industrial 4-20mA loop-powered process indicators, panel meters, and HMI displays. Its 12-bit ADC² is well-matched to 4-20mA loop measurements (with an external shunt), and its low-power modes enable loop-powered operation when combined with an efficient harvesting supply. The integrated LCD driver supports multi-digit process value displays with engineering-unit labels, while the -40C to +85C industrial temperature rating handles factory floor conditions. The hardware CWG (Complementary Waveform Generator) enables power-converter signaling for isolated loop supplies.
推荐
Smart Home Wall Thermostat / Climate Controller
The PIC16F19175T-I/MV is ideal for wall-mounted smart thermostats and climate controllers that combine temperature/humidity sensing, segment-LCD display, and Zigbee/BLE wireless connectivity. The integrated charge pump biases the LCD without an external boost circuit, the XLP architecture delivers multi-year battery life, and the PPS system allows wireless module and sensor pinout flexibility. The CWG, PWM, and SMT (Signal Measurement Timer) peripherals support triac-based HVAC load control and zero-cross switching.
推荐
Automotive Accessory Display (Non-Safety)
The PIC16F19175T-I/MV is suitable for non-safety automotive accessories such as tire-pressure indicator displays, battery monitors, and aftermarket gauges. While the -I/MV variant is industrial-grade (-40C to +85C), the pin-compatible PIC16F19175-E/MV (extended temperature) handles under-dash environments. The integrated LCD charge pump eliminates a boost converter, and the 12-bit ADC² reads multiple sensor channels with hardware-averaged accuracy. CAN/LIN peripherals are not on this device, so it suits accessory rather than chassis domains.
推荐
推荐产品汇总
工程参考数据： PIC16F19175T-I/MV ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC16F19175-I/MV | PIC16F19176T-I/MV | PIC16F19155T-I/MV | PIC16F19185T-I/MV | PIC16F19175-E/MV |
|---|---|---|---|---|---|---|
| Package | 40-UQFN (5x5 mm) with EP | 40-UQFN (5x5 mm) - identical | 40-UQFN (5x5 mm) - identical | 40-UQFN (5x5 mm) - identical | 40-UQFN (5x5 mm) - identical | 40-UQFN (5x5 mm) - identical |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Flash | 14 KB (8K x 14) | 14 KB - identical | 28 KB (double) | 8 KB | 14-28 KB family range | 14 KB - identical |
| Data SRAM | 1 KB | 1 KB - identical | 2 KB (double) | 1 KB | 1-2 KB family range | 1 KB - identical |
| Data EEPROM | 256 bytes | 256 bytes - identical | 256 bytes | 256 bytes | 256 bytes | 256 bytes - identical |
| Maximum CPU Speed | 32 MHz | 32 MHz - identical | 32 MHz | 32 MHz | 32 MHz | 32 MHz - identical |
| LCD Driver | Yes, up to 280 segments, with charge pump | Yes, identical | Yes | Yes | Yes | Yes, identical |
| I/O Pins | 35 | 35 - identical | 35 | 35 | 35 | 35 - identical |
| Temperature Range | -40C to +85C (Industrial, -I) | -40C to +85C (Industrial) | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +125C (Extended, -E) |
| Operating Voltage | 2.3V to 5.5V | 2.3V to 5.5V - identical | 2.3V to 5.5V | 2.3V to 5.5V | 2.3V to 5.5V | 2.3V to 5.5V - identical |
关键差异点
- Integrated LCD charge pump eliminates external bias components （对比 PIC16F18877-I/PT)
- XLP nanoamp sleep current outperforms general-purpose PIC16F188xx （对比 PIC16F18877-I/PT)
- Compact 40-UQFN (5x5 mm) saves PCB area vs TQFP （对比 PIC16F18877-I/PT (TQFP-40))
设计说明
The PIC16F19175T-I/MV integrates a charge pump for the LCD driver that operates from the main 2.3V to 5.5V supply. To achieve the lowest sleep current, switch off the LCD charge pump, ADC, and unused peripherals via PMD bits before entering Sleep. A typical Sleep current with full RAM retention and WDT disabled is in the sub-µA range per the Microchip datasheet, enabling multi-year coin-cell operation when duty-cycled properly.
Place a 0.1µF decoupling capacitor as close as possible to each VDD pin (11, 27, 40) and bond the central exposed pad (EP) directly to a continuous ground plane with at least 8 thermal vias for heat dissipation. The UQFN EP also serves as the electrical ground reference for the bottom of the die; inadequate EP soldering can cause thermal runaway or erratic I/O behavior. Keep trace lengths to the ICSP™ pads (RA0/RA1) under 50mm for reliable in-circuit programming.
Do not exceed 5.5V on any VDD pin or 5.5V on any I/O pin relative to VSS - the absolute maximum rating is 6.5V. The ICSP™ pins (RA0/RA1) default to analog input mode at POR; configure them as digital I/O via ANSEL registers if used as GPIO. The internal oscillator defaults to 16MHz HFINTOSC at reset; verify that OSCCON and OSCTUNE settings match your required system clock before relying on timing-critical peripherals such as UART or PWM.
The PPS (Peripheral Pin Select) system allows most digital peripherals to be remapped to any compatible digital I/O pin. Use this flexibility to route high-speed signals (SPI SCK, PWM outputs) to pins physically close to their destination, shortening PCB traces and reducing EMI. However, the LCD segment pins are fixed-position and cannot be remapped - plan your LCD glass layout around the dedicated SEG pins shown in the datasheet pinout table.
合规信息
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified - for automotive, select AEC-Q100 qualified PIC variants such as PIC16F19176T-E/MV (extended temp) or consult Microchip automotive-grade catalog. Lead-free and halogen-free per Microchip environmental compliance statement.
