PIC16F77-E/ML - 8-Bit 20MHz MCU, 14KB Flash | Microchip
料号： PIC16F77-E/ML ✓ 量产中PIC16F77-E/ML 概述
直接替换替代料： PIC16F77-E/ML ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PIC16F77-E/ML （相同外形与封装尺寸） ——差异在于 Package, Program Memory Size, Serial Interfaces, Timers, RoHS Status.
PIC16F77T-I/ML
✅ 直接替换📋 参考替代料（不在目录中）
PIC16F77-I/ML
✅ 直接替换联系询价
查看数据手册 →PIC16F77T-E/ML
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
PIC16F74-E/ML
✅ 直接替换联系询价
查看数据手册 →PIC16F777-I/ML
✅ 直接替换联系询价
查看数据手册 →PIC16F77-E/ML 最大额定值与电气特性
| Controller Type | 8-bit microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Program Memory | 14KB flash |
| Program Memory Organization | 8K x 14 words |
| RAM | 368 bytes |
| General-Purpose I/O | 33 lines |
| Analog-to-Digital Converter | 8-channel, 8-bit |
| Additional Timers | 2 timers |
| Capture/Compare/PWM Functions | 2 functions |
| Synchronous Serial Port | 3-wire SPI or 2-wire I²C |
| Asynchronous Serial Port | 1 USART |
| 封装 | 44-pin VQFN with exposed pad |
| Temperature Grade | Extended temperature (-E) |
| Product Series | PIC 16F |
| Core Architecture | 8-bit PIC |
PIC16F77-E/ML 44-pin vqfn with exposed pad 引脚配置指南
PIC16F77-E/ML（44-pin vqfn with exposed pad 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： PIC16F77-E/ML.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PIC16F77-E/ML 适用于 6 应用s: Industrial Sensor Acquisition, Motor and PWM Control, Digital Instrumentation, Battery-Powered Embedded Control, Communications Controller, Programmable Control Module.
Industrial Sensor Acquisition
The PIC16F77-E/ML fits sensor-acquisition equipment that must measure several analog inputs while also performing real-time control. Its integrated 8-channel 8-bit ADC provides 10-bit-resolution-equivalent stated functionality as an 8-bit converter without requiring an external ADC, while 33 I/O lines leave capacity for digital sensors, status indicators, and actuators. At up to 20 MHz, the controller can service interrupts, average or filter readings, and update outputs without excessive idle time. The 44-VQFN exposed-pad package also helps transfer heat away from the controller in compact industrial electronics. Designers should follow the manufacturer’s grounding and decoupling guidance, especially when analog and digital signals share the PCB.
推荐
Motor and PWM Control
The PIC16F77-E/ML is appropriate for compact motor-control subsystems that need accurate timing, adjustable pulse-width outputs, and digital feedback. The manufacturer product page confirms two additional timers and two capture/compare/PWM functions, which provide dedicated resources for generating PWM waveforms and measuring input periods. A 20 MHz operating speed gives designers additional timing headroom for control updates and commutation logic, while 33 I/O lines support limit switches, Hall or encoder inputs, and gate-control outputs. The same MCU can also expose a service interface through SPI, I²C, or USART, reducing the need for separate protocol converters in industrial actuator modules.
推荐
Digital Instrumentation
The PIC16F77-E/ML can serve as the control and communications core of a compact digital instrument. Its 8-bit ADC supports front-panel or sensor measurements, while 14KB of flash provides space for calibration tables, menu logic, and communication routines. The integrated USART supports point-to-point console or instrument communication, and the synchronous serial port can operate in 3-wire SPI or 2-wire I²C mode when connecting to displays, memory, or sensors. With 33 I/O lines, the controller can manage keys, indicators, relays, and an external data-acquisition stage while maintaining a compact 44-VQFN footprint.
推荐
Battery-Powered Embedded Control
The PIC16F77-E/ML is suitable for embedded controllers where analog monitoring, timers, and multiple communication standards must coexist in a small board. Its 8-channel ADC permits sharing among temperature, battery, and position-related inputs, while the 20 MHz operating speed supports responsive foreground and interrupt-driven processing. The 44-VQFN exposed-pad package minimizes board area compared with many through-hole or larger-lead-count microcontroller packages. Because sleep-mode current, analog accuracy, and timer performance details are not present in the verified excerpts, a battery-focused design must consult the complete manufacturer datasheet before estimating standby life or conversion accuracy.
推荐
Communications Controller
The PIC16F77-E/ML can consolidate serial connectivity in industrial or embedded communication equipment. Its USART handles asynchronous links, while the synchronous serial port selects either 3-wire SPI or 2-wire I²C, allowing the same controller to communicate with local sensors, transceivers, memory, and service equipment. A 20 MHz maximum operating frequency supports protocol servicing and supervisory logic, and 33 I/O lines provide handshake, fault, and routing signals around the communications functions. The 14KB flash capacity accommodates protocol state machines and configuration, although developers should confirm protocol timing and RAM allocation against the manufacturer documentation.
推荐
Programmable Control Module
The PIC16F77-E/ML is a practical controller for compact programmable automation modules combining configurable inputs and outputs with serial management. Thirty-three I/O lines support digital commands, status reporting, and actuator outputs, while the ADC enables analog supervision of supply rails or external sensors. Its timers and PWM functions can drive indicators, valves, or small motors, and SPI or I²C provides expansion for higher-bandwidth or multi-device interfaces. The 44-VQFN exposed-pad package permits dense implementation, but thermal-pad soldering and creepage requirements must be addressed in the PCB footprint and assembly process.
推荐
推荐产品汇总
工程参考数据： PIC16F77-E/ML ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC16F77T-I/ML | PIC16F77-I/ML | PIC16F77T-E/ML | PIC16F74-E/ML | PIC16F777-I/ML |
|---|---|---|---|---|---|---|
| Package | 44-VQFN Exposed Pad | 44-VQFN Exposed Pad | 44-VQFN Exposed Pad | 44-VQFN Exposed Pad | 44-VQFN Exposed Pad | 44-VQFN Exposed Pad |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Architecture | 8-bit PIC | 8-bit PIC | 8-bit PIC | 8-bit PIC | 8-bit PIC | 8-bit PIC |
关键差异点
- Same-device 44-VQFN migration options （对比 PIC16F77T-I/ML)
- Integrated mixed-signal and communications resources （对比 PIC16F74-E/ML)
- 20 MHz processing rate with 33 I/O lines （对比 PIC16F777-I/ML)
- Compact 44-VQFN exposed-pad integration （对比 PIC16F77-E/PT)
设计说明
The 44-VQFN exposed pad is part of the thermal and electrical design, not an optional feature. Follow the manufacturer land-pattern and exposed-pad connection instructions, provide adequate ground and copper beneath the device, and account for thermal coupling into the PCB. Because junction-to-ambient thermal resistance is not supplied in the verified excerpts, do not estimate production thermal margin without the datasheet and a realistic PCB model.
Place input and output bypass capacitors close to their associated power pins and route the exposed pad to the recommended ground or supply net. Keep sensitive analog inputs away from PWM edges, switching-node traces, and high-current return paths. The compact VQFN footprint requires careful thermal-via layout and assembly planning, while the 33 I/O lines should be assigned early so that debug programming and production test access remain available.
Do not treat every PIC16F-family part with a similar /ML suffix as an automatic drop-in replacement. Verify the complete 44-pin map, exposed-pad connection, ADC channels, timer resources, memory size, peripheral set, and configuration bits against the manufacturer datasheet. A missing or differently connected pin can affect firmware startup, programming, analog measurement, or motor-control timing even when the package dimensions appear identical.
Separate analog and digital return paths as far as practical, use a stable reference near the ADC circuitry, and avoid routing communication clocks parallel with high-energy switching traces. Although SPI and I²C are available on the device, their usable rate depends on the complete electrical timing data, which is not included in the verified excerpts. Confirm voltage levels, pull-up requirements, clock limits, and signal-integrity margins in the manufacturer documentation.
合规信息
The supplied product-page and distributor excerpts do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. No compliance claim has been inferred.
