PIC16F77-E/ML - 8-Bit 20MHz MCU, 14KB Flash | Microchip
部品番号: PIC16F77-E/ML ✓ 生産中PIC16F77-E/ML 概要
ドロップイン代替品: PIC16F77-E/ML — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC16F77-E/ML （同一形状・フットプリント） — 相違点: Package, Program Memory Size, Serial Interfaces, Timers, RoHS Status.
PIC16F77T-I/ML
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC16F77-I/ML
✅ ドロップイン価格はお問い合わせください
データシートを見る →PIC16F77T-E/ML
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
PIC16F74-E/ML
✅ ドロップイン価格はお問い合わせください
データシートを見る →PIC16F777-I/ML
✅ ドロップイン価格はお問い合わせください
データシートを見る →PIC16F77-E/ML 最大定格＆電気的特性
| Controller Type | 8-bit microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Program Memory | 14KB flash |
| Program Memory Organization | 8K x 14 words |
| RAM | 368 bytes |
| General-Purpose I/O | 33 lines |
| Analog-to-Digital Converter | 8-channel, 8-bit |
| Additional Timers | 2 timers |
| Capture/Compare/PWM Functions | 2 functions |
| Synchronous Serial Port | 3-wire SPI or 2-wire I²C |
| Asynchronous Serial Port | 1 USART |
| パッケージ | 44-pin VQFN with exposed pad |
| Temperature Grade | Extended temperature (-E) |
| Product Series | PIC 16F |
| Core Architecture | 8-bit PIC |
PIC16F77-E/ML 44-pin vqfn with exposed pad ピン配置ガイド
PIC16F77-E/ML (44-pin vqfn with exposed pad パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: PIC16F77-E/ML.
詳細は データシート をご参照ください。
主な用途
PIC16F77-E/ML の用途: 6 件s: Industrial Sensor Acquisition, Motor and PWM Control, Digital Instrumentation, Battery-Powered Embedded Control, Communications Controller, Programmable Control Module.
Industrial Sensor Acquisition
The PIC16F77-E/ML fits sensor-acquisition equipment that must measure several analog inputs while also performing real-time control. Its integrated 8-channel 8-bit ADC provides 10-bit-resolution-equivalent stated functionality as an 8-bit converter without requiring an external ADC, while 33 I/O lines leave capacity for digital sensors, status indicators, and actuators. At up to 20 MHz, the controller can service interrupts, average or filter readings, and update outputs without excessive idle time. The 44-VQFN exposed-pad package also helps transfer heat away from the controller in compact industrial electronics. Designers should follow the manufacturer’s grounding and decoupling guidance, especially when analog and digital signals share the PCB.
おすすめ
Motor and PWM Control
The PIC16F77-E/ML is appropriate for compact motor-control subsystems that need accurate timing, adjustable pulse-width outputs, and digital feedback. The manufacturer product page confirms two additional timers and two capture/compare/PWM functions, which provide dedicated resources for generating PWM waveforms and measuring input periods. A 20 MHz operating speed gives designers additional timing headroom for control updates and commutation logic, while 33 I/O lines support limit switches, Hall or encoder inputs, and gate-control outputs. The same MCU can also expose a service interface through SPI, I²C, or USART, reducing the need for separate protocol converters in industrial actuator modules.
おすすめ
Digital Instrumentation
The PIC16F77-E/ML can serve as the control and communications core of a compact digital instrument. Its 8-bit ADC supports front-panel or sensor measurements, while 14KB of flash provides space for calibration tables, menu logic, and communication routines. The integrated USART supports point-to-point console or instrument communication, and the synchronous serial port can operate in 3-wire SPI or 2-wire I²C mode when connecting to displays, memory, or sensors. With 33 I/O lines, the controller can manage keys, indicators, relays, and an external data-acquisition stage while maintaining a compact 44-VQFN footprint.
おすすめ
Battery-Powered Embedded Control
The PIC16F77-E/ML is suitable for embedded controllers where analog monitoring, timers, and multiple communication standards must coexist in a small board. Its 8-channel ADC permits sharing among temperature, battery, and position-related inputs, while the 20 MHz operating speed supports responsive foreground and interrupt-driven processing. The 44-VQFN exposed-pad package minimizes board area compared with many through-hole or larger-lead-count microcontroller packages. Because sleep-mode current, analog accuracy, and timer performance details are not present in the verified excerpts, a battery-focused design must consult the complete manufacturer datasheet before estimating standby life or conversion accuracy.
おすすめ
Communications Controller
The PIC16F77-E/ML can consolidate serial connectivity in industrial or embedded communication equipment. Its USART handles asynchronous links, while the synchronous serial port selects either 3-wire SPI or 2-wire I²C, allowing the same controller to communicate with local sensors, transceivers, memory, and service equipment. A 20 MHz maximum operating frequency supports protocol servicing and supervisory logic, and 33 I/O lines provide handshake, fault, and routing signals around the communications functions. The 14KB flash capacity accommodates protocol state machines and configuration, although developers should confirm protocol timing and RAM allocation against the manufacturer documentation.
おすすめ
Programmable Control Module
The PIC16F77-E/ML is a practical controller for compact programmable automation modules combining configurable inputs and outputs with serial management. Thirty-three I/O lines support digital commands, status reporting, and actuator outputs, while the ADC enables analog supervision of supply rails or external sensors. Its timers and PWM functions can drive indicators, valves, or small motors, and SPI or I²C provides expansion for higher-bandwidth or multi-device interfaces. The 44-VQFN exposed-pad package permits dense implementation, but thermal-pad soldering and creepage requirements must be addressed in the PCB footprint and assembly process.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC16F77-E/ML — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC16F77T-I/ML | PIC16F77-I/ML | PIC16F77T-E/ML | PIC16F74-E/ML | PIC16F777-I/ML |
|---|---|---|---|---|---|---|
| Package | 44-VQFN Exposed Pad | 44-VQFN Exposed Pad | 44-VQFN Exposed Pad | 44-VQFN Exposed Pad | 44-VQFN Exposed Pad | 44-VQFN Exposed Pad |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Architecture | 8-bit PIC | 8-bit PIC | 8-bit PIC | 8-bit PIC | 8-bit PIC | 8-bit PIC |
主な差別化要因
- Same-device 44-VQFN migration options （vs PIC16F77T-I/ML)
- Integrated mixed-signal and communications resources （vs PIC16F74-E/ML)
- 20 MHz processing rate with 33 I/O lines （vs PIC16F777-I/ML)
- Compact 44-VQFN exposed-pad integration （vs PIC16F77-E/PT)
設計ノート
The 44-VQFN exposed pad is part of the thermal and electrical design, not an optional feature. Follow the manufacturer land-pattern and exposed-pad connection instructions, provide adequate ground and copper beneath the device, and account for thermal coupling into the PCB. Because junction-to-ambient thermal resistance is not supplied in the verified excerpts, do not estimate production thermal margin without the datasheet and a realistic PCB model.
Place input and output bypass capacitors close to their associated power pins and route the exposed pad to the recommended ground or supply net. Keep sensitive analog inputs away from PWM edges, switching-node traces, and high-current return paths. The compact VQFN footprint requires careful thermal-via layout and assembly planning, while the 33 I/O lines should be assigned early so that debug programming and production test access remain available.
Do not treat every PIC16F-family part with a similar /ML suffix as an automatic drop-in replacement. Verify the complete 44-pin map, exposed-pad connection, ADC channels, timer resources, memory size, peripheral set, and configuration bits against the manufacturer datasheet. A missing or differently connected pin can affect firmware startup, programming, analog measurement, or motor-control timing even when the package dimensions appear identical.
Separate analog and digital return paths as far as practical, use a stable reference near the ADC circuitry, and avoid routing communication clocks parallel with high-energy switching traces. Although SPI and I²C are available on the device, their usable rate depends on the complete electrical timing data, which is not included in the verified excerpts. Confirm voltage levels, pull-up requirements, clock limits, and signal-integrity margins in the manufacturer documentation.
コンプライアンス情報
The supplied product-page and distributor excerpts do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. No compliance claim has been inferred.
