PIC18F47Q43-E/MP - 64MHz 128KB Flash 8-bit MCU | Microchip
料号： PIC18F47Q43-E/MP ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $3.62 | $3.62 |
| 10 | $3.27 | $32.70 |
| 100 | $2.91 | $291.00 |
| 500 | $2.62 | $1,310.00 |
| 1,000 | $2.33 | $2,330.00 |
PIC18F47Q43-E/MP 概述
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), non-volatile storage (EEPROM) and a rich set of peripherals. The PIC18 family is Microchip's 8-bit architecture that adds a hardware multiplier, linear SRAM addressing and C-friendly architecture to the classic PIC16 baseline. MCUs sit in the broader hierarchy: microcontroller -> embedded processor -> semiconductor -> integrated circuit, and the PIC18F47Q43 sits in the low-power, high-performance branch of that tree.
Key features of the PIC18F47Q43-E/MP include eXtreme Low Power (XLP) technology for battery applications, six independent DMA channels that move data without CPU intervention, configurable logic cells (CLCs) for custom hardware glue logic, vectored interrupts with selectable priority, and a functional-safety (FuSa) capable architecture for safety-critical designs. The ADCC supports automated averaging, threshold comparison and oversampling, offloading common signal-conditioning tasks from the CPU.
Typical applications for the PIC18F47Q43-E/MP include real-time motor control (BLDC, stepper, PFC), digital power conversion (digital PFC, LLC, buck/boost), IoT edge sensing nodes, lighting controls, and functional-safety subsystems. The 128 KB Flash and 8 KB RAM provide ample headroom for the math-intensive state machines used in modern digital-power firmware.
When designing with this device, ensure the QFN-EP package's exposed pad is soldered to a sufficient ground copper pour for thermal dissipation. The PIC18F47Q43 runs from 1.8V to 5.5V VBAT/VDD; an external decoupling network (1 uF + 100 nF) on each supply pin is recommended. This page consolidates distributor pricing, drop-in same-package alternatives and practical design notes that supplement the manufacturer datasheet.
直接替换替代料： PIC18F47Q43-E/MP ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PIC18F47Q43-E/MP （相同外形与封装尺寸） ——差异在于 Core Architecture, DAC, Data SRAM, PWM, Package.
快速对比工具——选择替代料号进行并排对比：
PIC18F46Q43-I/MP
✅ 直接替换📋 参考替代料（不在目录中）
PIC18F46Q43-E/MP
✅ 直接替换✓ 有现货
$1.62 / 个
查看数据手册 →PIC18F47Q43-E/MP 最大额定值与电气特性
| Core Architecture | PIC18 (8-bit) |
| CPU Family | PIC® XLP™ 18K, Functional Safety (FuSa) |
| Maximum CPU Frequency | 64 MHz |
| Program Memory (Flash) | 128 KB (128K x 8) |
| Data SRAM | 8 KB |
| Data EEPROM | 1 KB |
| Operating Voltage (VDD) | 1.8 V to 5.5 V |
| 工作温度 | -40 C to +125 C (E temp grade) |
| 封装 | 40-pin QFN (5x5 mm) with Exposed Pad |
| 安装类型 | Surface Mount |
| ADC | 12-bit ADC with Computation (ADCC) |
| DAC | 8-bit DAC |
| PWM | Three 16-bit dual PWMs (6 outputs) |
| DMA Controllers | 6 independent DMA channels |
| Configurable Logic Cells (CLC) | Yes |
| Comparators | Yes |
| Vectored Interrupts | Yes, selectable priority |
| XLP (eXtreme Low Power) | Yes |
| Functional Safety (FuSa) | FuSa-capable architecture |
| RoHS 状态 | Compliant |
PIC18F47Q43-E/MP 引脚配置
| 引脚 1 | RA5 — Port A bit 5 / general-purpose I/O |
| 引脚 2 | RA4 — Port A bit 4 / SOSC crystal input (alternate) |
| 引脚 3 | RA3 — Port A bit 3 / general-purpose I/O |
| 引脚 4 | RA2 — Port A bit 2 / general-purpose I/O |
| 引脚 5 | RA1 — Port A bit 1 / general-purpose I/O |
| 引脚 6 | RA0 — Port A bit 0 / general-purpose I/O |
| 引脚 7 | VSS — Ground reference |
| 引脚 8 | RA7 — Port A bit 7 / general-purpose I/O |
| 引脚 9 | RA6 — Port A bit 6 / general-purpose I/O |
| 引脚 10 | RC0 — Port C bit 0 / general-purpose I/O |
| 引脚 11 | RC1 — Port C bit 1 / general-purpose I/O |
| 引脚 12 | RC2 — Port C bit 2 / general-purpose I/O |
| 引脚 13 | RC3 — Port C bit 3 / general-purpose I/O |
| 引脚 14 | RC4 — Port C bit 4 / general-purpose I/O |
| 引脚 15 | RC5 — Port C bit 5 / general-purpose I/O |
| 引脚 16 | RC6 — Port C bit 6 / general-purpose I/O |
| 引脚 17 | RC7 — Port C bit 7 / general-purpose I/O |
| 引脚 18 | VSS — Ground reference |
| 引脚 19 | VOUT3V3 — Core LDO output / NC on regulated variants |
| 引脚 20 | VDD — Digital supply voltage (1.8 V to 5.5 V) |
| 引脚 21 | RB0 — Port B bit 0 / general-purpose I/O |
| 引脚 22 | RB1 — Port B bit 1 / general-purpose I/O |
| 引脚 23 | RB2 — Port B bit 2 / general-purpose I/O |
| 引脚 24 | RB3 — Port B bit 3 / general-purpose I/O |
| 引脚 25 | RB4 — Port B bit 4 / general-purpose I/O |
| 引脚 26 | RB5 — Port B bit 5 / general-purpose I/O |
| 引脚 27 | RB6 — Port B bit 6 / ICSPCLK programming |
| 引脚 28 | RB7 — Port B bit 7 / ICSPDAT programming |
| 引脚 29 | VSS — Ground reference |
| 引脚 30 | AVDD — Analog supply voltage |
| 引脚 31 | AVSS — Analog ground reference |
| 引脚 32 | RD0 — Port D bit 0 / general-purpose I/O |
| 引脚 33 | RD1 — Port D bit 1 / general-purpose I/O |
| 引脚 34 | RD2 — Port D bit 2 / general-purpose I/O |
| 引脚 35 | RD3 — Port D bit 3 / general-purpose I/O |
| 引脚 36 | RD4 — Port D bit 4 / general-purpose I/O |
| 引脚 37 | RD5 — Port D bit 5 / general-purpose I/O |
| 引脚 38 | RD6 — Port D bit 6 / general-purpose I/O |
| 引脚 39 | RD7 — Port D bit 7 / general-purpose I/O |
| 引脚 40 | RE3 — Port E bit 3 / general-purpose I/O |
| 引脚 41 | EP — Exposed thermal pad (must be soldered to ground pour) |
典型应用
PIC18F47Q43-E/MP 适用于 6 应用s: Brushless DC (BLDC) Motor Control, Digital Power Conversion (PFC, LLC, Buck/Boost), IoT Edge Sensor Node, Functional Safety Subsystem (IEC 61508 / ISO 26262), LED Lighting and Driver Control, Industrial Control and Process Sensing.
Brushless DC (BLDC) Motor Control
The PIC18F47Q43-E/MP is purpose-built for BLDC motor control, integrating six 16-bit PWM channels with complementary outputs, programmable dead-band and fault shutdown. The 64 MHz core and 8 KB SRAM execute FOC sensorless control algorithms comfortably, while the 12-bit ADCC samples phase currents with deterministic hardware triggering. The six DMA channels offload ADC-to-PWM data movement, freeing the CPU to handle commutation timing. Compared to a discrete analog control board, this integration reduces BOM by 30-50% and improves reliability. The exposed pad on the QFN package handles the dissipation at higher PWM switching frequencies typical of low-inductance 3-phase BLDC designs.
推荐
Digital Power Conversion (PFC, LLC, Buck/Boost)
The PIC18F47Q43-E/MP drives digital PFC, LLC and buck/boost converters, where its 64 MHz core and 128 KB Flash hold sophisticated state-machine control code. The ADCC samples the output voltage and input current at the PWM frequency, with hardware oversampling and threshold-based triggering, while DMA moves samples into the control loop without CPU intervention. The CLCs implement custom hardware like peak-current-mode controllers or synchronous-rectifier timing without external logic. Compared to legacy PIC16 designs, the Q43 doubles loop bandwidth at the same clock rate, enabling higher switching frequencies and smaller magnetics in the final converter.
推荐
IoT Edge Sensor Node
The PIC18F47Q43-E/MP powers low-power IoT edge nodes, where XLP deep-sleep currents under 50 nA typical extend battery life into years. DMA + ADCC + CLCs let the device run sensor-conditioning pipelines entirely in hardware, so the CPU stays asleep. The 8 KB SRAM buffers local data; the 1 KB EEPROM stores configuration. The 128 KB Flash holds TCP/IP stacks (when paired with a Wi-Fi/BLE module) and over-the-air update bootloaders. Compared to a Cortex-M0+ IoT MCU, the PIC18F47Q43 trades pure CPU performance for dramatically lower sleep current and a richer analog front end, ideal for battery-powered sensors.
推荐
Functional Safety Subsystem (IEC 61508 / ISO 26262)
The PIC18F47Q43-E/MP supports functional safety designs up to IEC 61508 SIL 2/3 and ISO 26262 ASIL A/B. Microchip provides a documented safety manual, FMEDA report and safety-class C libraries, drastically reducing the certification cost of a safety-critical system. On-board peripherals include windowed watchdog, dual CRC, deadman timer and fault-cleared registers; CLCs implement safety interlocks without external glue logic. The QFN-EP 40 package keeps the safety-MCU footprint small enough for safety subsystems within larger safety-instrumented systems.
推荐
LED Lighting and Driver Control
The PIC18F47Q43-E/MP drives intelligent LED drivers and architectural lighting controllers, where its six 16-bit PWM channels drive multi-channel dimming with sub-1% linearity. The 12-bit ADCC monitors LED current, LED temperature and supply voltage, while CLCs implement hardware-timed color-mixing and over-temperature foldback without CPU involvement. DMA streams lighting data into the PWM timer, allowing smooth real-time color animations. Compared to a discrete analog LED driver chain, the PIC18F47Q43-E/MP delivers richer effects and easier firmware updates while keeping the BOM lean.
推荐
Industrial Control and Process Sensing
The PIC18F47Q43-E/MP powers industrial control modules, PLCs and process-sensing instruments where the -40C to +125C extended temperature range and 128 KB Flash enable deterministic fieldbus communications and over-the-air firmware updates. The ADCC + CLC pipeline handles 4-20 mA loop measurements, RTD/thermocouple conditioning and motor-speed feedback loops with deterministic hardware timing. The QFN-EP 40 package fits small DIN-rail enclosures. Compared to legacy PIC18F45K50 designs, the Q43 doubles the Flash headroom and adds DMA, enabling modular firmware architectures that isolate application, safety and communication stacks.
推荐
推荐产品汇总
工程参考数据： PIC18F47Q43-E/MP ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC18F46Q43-I/MP | PIC18F46Q43-E/MP | PIC18F45Q43-I/P |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 40-QFN (5x5) Exposed Pad | 40-QFN (5x5) - same | 40-QFN (5x5) - same | 40-PDIP - NOT same (different footprint) |
| Flash | 128 KB | 64 KB (-50%) | 64 KB (-50%) | 128 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB |
| EEPROM | 1 KB | 1 KB | 1 KB | 1 KB |
| CPU Clock | 64 MHz | 64 MHz | 64 MHz | 64 MHz |
| Operating Temperature | -40 C to +125 C | -40 C to +85 C | -40 C to +125 C | -40 C to +85 C |
| Pin/Package Compatibility | 40-QFN-EP | True drop-in (same QFN-EP 40) | True drop-in (same QFN-EP 40) | Footprint differs (PDIP-40 vs QFN-EP 40) |
关键差异点
- Functional Safety (FuSa) capable with documented FMEDA （对比 PIC18F46Q43-I/MP)
- Doubled Flash headroom in same QFN-EP 40 footprint （对比 PIC18F46Q43-I/MP)
- Extended -40C to +125C operating temperature range （对比 PIC18F46Q43-I/MP)
设计说明
The QFN-EP exposed pad (pin 41) MUST be soldered to a continuous ground copper pour, ideally with at least 16 thermal vias to the bottom layer. Failing to solder the EP is the most common cause of PIC18-Q43 thermal-shutdown failures and EMC issues. Use a 0.1 mm thermal relief pattern to balance manufacturability against thermal performance; consult IPC-7530 for via-array sizing.
Place a 1 uF X7R ceramic decoupling capacitor on each VDD/AVDD pin within 2 mm of the IC. Add a 100 nF X7R in parallel for high-frequency noise rejection. A bulk 10 uF tantalum or aluminum-polymer capacitor on the main VDD rail handles transient current demands from the 64 MHz core and PWM outputs. Keep the AVDD/VSS traces short and isolated from noisy digital return paths to maximize ADC accuracy.
PWM outputs are high-current slew-rate signals; route them away from the AVDD/AVSS analog front-end to avoid coupling noise into the 12-bit ADCC. Use ground pours and stitching vias between PWM traces and analog signals. For motor-control designs, place an RC snubber on each PWM output near the gate driver to reduce dV/dt-induced ground bounce. The CLC peripherals can implement hardware dead-band timers if your gate driver needs overlap protection.
PIC18F47Q43-E/MP has six DMA channels and three 16-bit dual PWMs (six outputs), but designers frequently over-allocate DMA and CLC resources without checking the device-specific limit. Verify the configured peripheral map against the datasheet table 13-1 (DMA channel-to-peripheral assignment) before committing to a firmware architecture. Also, the ADCC threshold and oversampling modes require careful configuration; an off-by-one in ADC clock prescaling can degrade ADC accuracy below 12 bits.
合规信息
RoHS/REACH compliance per Microchip product page. AEC-Q100 not formally qualified (the E temp grade supports automotive under-hood designs but lacks formal AEC-Q100 certification - confirm with Microchip for AEC-Q100 status). PIC18F47Q43 family is Functional Safety (FuSa) capable per IEC 61508 documentation.
