Microchip Technology

PIC24F08KL201-E/SO 16-Bit 32MHz MCU | Microchip Technology

料号: PIC24F08KL201-E/SO ✓ 量产中
3 V Vdss 20-pin SOIC Package 32 MHz Speed 8 KB Flash Memory
最小起订量: 1 |

PIC24F08KL201-E/SO 概述

The Microchip Technology PIC24F08KL201-E/SO is a cost-effective 16-bit PIC24F microcontroller with a 32 MHz operating frequency, 8 KB of Flash program memory, 512 bytes of RAM, and a 20-pin SOIC package. The device provides up to 16 MIPS performance and is designed for cost-sensitive embedded systems requiring efficient control and low-power operation. Its integrated nanoWatt XLP technology supports eXtreme Low Power consumption, helping reduce energy use in battery-operated and standby applications.

The PIC24F is a 16-bit microcontroller architecture that combines a compact instruction set with integrated peripherals commonly used in embedded control designs. The PIC24F08KL201 includes MSSP peripherals for I2C and SPI communication and CCP peripherals for capture, compare, and PWM functions. These peripherals reduce the need for external components and allow designers to implement sensor interfaces, communication links, motor-control functions, and timing tasks with a compact controller.

The device includes 8 KB of Flash memory organized as 2.75K x 24 bits, along with 512 x 8 bytes of RAM. Its 32 MHz maximum operating frequency and 16 MIPS performance provide useful processing headroom for basic control, protocol handling, and low-complexity signal processing. The 20-pin SOIC package supports conventional PCB assembly and is suitable for designs requiring a small, readily handled package rather than a fine-pitch land pattern.

Typical applications include low-cost industrial controllers, sensor nodes, battery-powered instruments, consumer appliances, small motor-control boards, and compact communication modules. The MSSP block supports serial connectivity to sensors and external devices, while the CCP block supports timing and PWM functions in motor, lighting, and control applications. The integrated XLP features are particularly useful when the controller spends substantial time idle or operates from limited energy sources.

When designing a PCB around the PIC24F08KL201-E/SO, follow the manufacturer pinout and recommended decoupling requirements exactly. Provide a stable supply and adequate bypass capacitance near the device, reserve programming and debug access, and confirm the operating limits for the selected supply voltage and temperature range. Review the manufacturer datasheet for the exact pin names, electrical characteristics, and peripheral configuration.

This product page organizes the key specifications, application guidance, comparison points, and practical design considerations for engineers evaluating the PIC24F08KL201-E/SO. It is intended to support rapid part selection while preserving the importance of validating pin compatibility, firmware support, and application requirements before a design is released for production.

直接替换替代料: PIC24F08KL201-E/SO ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: PIC24F08KL201-E/SO (相同外形与封装尺寸) ——差异在于 Core Architecture, Package.

Microchip Technology
Core Architecture: PIC24F (16-bit PIC)
Package: 20-pin SOIC (SO), 7.5 mm body width

该产品暂无直接替换替代料。

请求替代料

PIC24F08KL201-E/SO 最大额定值与电气特性

Microcontroller Type 16-bit PIC24F microcontroller
Operating Frequency 32 MHz
Performance 16 MIPS
Program Memory 8 KB Flash
Program Memory Organization 2.75K x 24 bits
Data Memory 512 x 8 bytes RAM
电源电压 3 V
Low-Power Technology nanoWatt XLP
Serial Communication Peripherals MSSP with I2C and SPI
Timer Peripherals CCP capture, compare, and PWM
封装 20-pin SOIC
Package Type SOP
安装类型 Surface Mount
引脚数量 20 pins
Core Architecture PIC24F 16-bit core

PIC24F08KL201-E/SO sop 引脚配置指南

PIC24F08KL201-E/SO(sop 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

PIC24F08KL201-E/SO 的 sop 封装引脚图

暂无详细引脚数据: PIC24F08KL201-E/SO.

请参阅 数据手册 以查看完整引脚配置。

典型应用

PIC24F08KL201-E/SO 适用于 6 应用s: Battery-Powered Sensor Node, I2C Environmental Sensor Interface, Compact SPI Data Acquisition, Small Fan and Pump Controller, Cost-Sensitive Consumer Appliance, Industrial Control and Communication Module.

🔋

Battery-Powered Sensor Node

The PIC24F08KL201-E/SO fits battery-powered sensor nodes because its nanoWatt XLP architecture supports low-power operating modes while the 16-bit core provides more control capability than a basic 8-bit MCU. The MSSP block can operate an I2C or SPI sensor bus, and the 8 KB Flash capacity can store application firmware and calibration data. Place the device in the duty cycle so the controller remains asleep between measurements, wakes to acquire data, and returns to a low-energy state. Confirm sensor standby current and average operating current against the system power budget.

🧩

I2C Environmental Sensor Interface

The integrated MSSP peripheral makes the PIC24F08KL201-E/SO suitable for environmental monitoring boards that combine temperature, humidity, pressure, or gas sensors over I2C. Its 32 MHz operating frequency allows the MCU to service sensor transactions, apply filtering, update a display, and maintain a communications schedule without a larger application processor. The 512-byte RAM is sufficient for short measurement buffers and protocol state. Follow the sensor and Microchip interface requirements for pull-ups, address selection, and timing, and verify the bus capacitance when several devices share the line.

📊

Compact SPI Data Acquisition

For a compact SPI acquisition or control module, the PIC24F08KL201-E/SO combines a 16-bit core, 32 MHz clock, and MSSP serial peripheral in a 20-pin SOIC package. The firmware can clock out sensors or converters, buffer results in 512 bytes of RAM, and expose status through another communications channel. SPI support can reduce wiring compared with parallel data buses and supports full-duplex transfers when the selected sensor requires it. Validate voltage levels, maximum clock rate, chip-select behavior, and grounding before production release.

⚙️

Small Fan and Pump Controller

The CCP capture, compare, and PWM capabilities of the PIC24F08KL201-E/SO suit small fan, pump, valve, or actuator controllers where variable timing is needed but a dedicated motor driver is unnecessary for the MCU stage. At up to 16 MIPS, the controller can execute duty-cycle updates, monitor feedback signals, and coordinate simple protection logic. Use an external transistor or motor-driver circuit for current switching, and isolate that power stage from sensitive timing signals. Validate stall current, switching losses, EMI, and thermal margin in the final load path.

🏠

Cost-Sensitive Consumer Appliance

The PIC24F08KL201-E/SO is appropriate for cost-sensitive consumer appliances that need local control, serial communication, and programmable timing in a small package. The 8 KB Flash store supports focused control firmware, while MSSP can connect a display, sensor, or configuration interface and CCP can control indicator or actuator timing. The 20-pin SOIC outline is easy to assemble using conventional surface-mount methods. Keep high-current relays, heaters, and motor winders on a separate protected power section, and use firmware debouncing and fault handling for user-facing controls.

🏭

Industrial Control and Communication Module

The PIC24F08KL201-E/SO can serve as the local controller in a small industrial module that translates sensor or actuator information over I2C or SPI. Its 16-bit architecture and 32 MHz clock provide adequate responsiveness for protocol handling, state-machine execution, and periodic control tasks, while XLP features support idle periods between commands. The SOIC package is practical for industrial equipment requiring a serviceable, conventional footprint. Use isolation, surge protection, and appropriate grounding when the module connects to long external wiring, and validate environmental requirements against the exact ordering variant.

What is the operating frequency of the PIC24F08KL201-E/SO?
The PIC24F08KL201-E/SO operates at up to 32 MHz and delivers 16 MIPS performance. According to the Microchip Technology product page and the PIC24F08KL201 datasheet information, the device uses a 16-bit PIC24F core and is intended for cost-sensitive embedded applications that need more processing capability than an 8-bit architecture without moving to a larger controller. The 32 MHz clock rate also supports responsive control-loop and serial-interface timing in compact embedded systems.
How much Flash memory and RAM does the PIC24F08KL201-E/SO have?
The PIC24F08KL201-E/SO provides 8 KB of Flash program memory organized as 2.75K x 24 bits and 512 x 8 bytes of RAM. The Microchip Technology product information identifies these capacities directly. The 24-bit Flash organization is suited to PIC24-family instruction storage, while 512 bytes of RAM can hold variables, communication buffers, and control state in small embedded systems. Confirm firmware size and working-memory requirements before finalizing the controller selection.
Which peripherals are integrated into the PIC24F08KL201-E/SO?
The PIC24F08KL201-E/SO integrates MSSP peripherals for I2C and SPI communication and CCP peripherals for capture, compare, and PWM functions. According to the Microchip Technology product page, these PIC18-style peripherals are included for design flexibility and easier migration. MSSP can connect the controller to sensors, displays, memory, or other serial peripherals, while CCP supports timing, pulse-width modulation, and event-capture functions.
What is the power-management feature of the PIC24F08KL201-E/SO?
The PIC24F08KL201-E/SO includes nanoWatt XLP technology for eXtreme Low Power consumption. The Microchip Technology product page identifies this feature as a core benefit of the PIC24F08KL201 family. XLP functions are useful when the controller spends extended periods idle, wakes periodically to process a sensor reading, or operates in a battery-powered product. Actual current consumption depends on the selected operating mode, clock configuration, peripherals, and firmware behavior.
Is the PIC24F08KL201-E/SO suitable for low-cost embedded control systems?
Yes, the PIC24F08KL201-E/SO is suitable for cost-sensitive embedded control systems because it combines a 16-bit core, 32 MHz operation, 16 MIPS performance, and integrated communication and timer peripherals in a 20-pin SOIC package. The Microchip Technology product page specifically describes the device as cost effective. It is a practical choice when a design needs more control capability than a basic 8-bit MCU without requiring a high-pin-count or complex mixed-signal device.
What package does the PIC24F08KL201-E/SO use?
The PIC24F08KL201-E/SO uses a 20-pin SOIC package. The Microchip Technology product listing identifies the device as a 20-SOIC microcontroller, while the component listing describes the package code as SOP with a rectangular shape. This surface-mount package is useful for compact embedded products and conventional PCB assembly. Use the manufacturer pin diagram when assigning tracks because pin names and alternate functions must follow the exact SOIC outline.
Can PIC24F08KL201-E/SO be used for I2C or SPI communication?
Yes, the PIC24F08KL201-E/SO includes an MSSP peripheral supporting I2C and SPI communication. According to the Microchip Technology product page, the MSSP feature provides a flexible interface for connecting the controller to sensors, EEPROMs, displays, converters, and other serial devices. Firmware must configure the MSSP mode, clock, interrupt behavior, and peripheral pin assignments. The final PCB design should also account for pull-up requirements and signal-level compatibility on each bus.
What can replace the PIC24F08KL201-E/SO?
No verified drop-in replacement can be identified from the available cross-reference information for the PIC24F08KL201-E/SO. A replacement must match the 20-pin SOIC footprint, pin functions, 16-bit firmware ecosystem, 32 MHz timing, 8 KB Flash capacity, 512 bytes of RAM, and required peripheral set. Package variants using SSOP or other outlines are not drop-in substitutes, and changing the MCU architecture generally requires firmware, tooling, and hardware validation.
What is the best equivalent for the PIC24F08KL201-E/SO?
The best equivalent is the PIC24F08KL201-E/SO itself unless Microchip Technology confirms a qualified alternative for the required package and temperature grade. No cross-brand device in the available information demonstrates both a 20-pin SOIC footprint and equivalent pin-level behavior with this PIC24F controller. For a migration, compare the full datasheet, peripheral assignments, memory map, timing characteristics, development tools, and qualification requirements rather than relying only on memory size or clock frequency.
Where can I download the PIC24F08KL201-E/SO datasheet PDF?
The official datasheet and product documentation can be reached through the Microchip Technology PIC24F08KL201 product page at https://www.microchip.com/en-us/product/PIC24F08KL201. From the product page, open the Documents or Datasheets section and select the PIC24F08KL201 data sheet. Use the exact -E/SO ordering information when reviewing grade-specific electrical limits, package drawings, and the SOIC pinout.
Where can I find the PIC24F08KL201-E/SO pinout?
Find the PIC24F08KL201-E/SO pinout in the manufacturer’s PIC24F08KL201 data sheet and on the linked Microchip Technology product page. The available package information confirms a 20-pin SOIC outline, but the complete pin-name and alternate-function table must be taken directly from the manufacturer diagram. Assign PCB nets from that table rather than from a generic 20-pin footprint, because I/O, power, programming, ground, and peripheral assignments are device-specific.
When should I choose the PIC24F08KL201-E/SO over another PIC24F microcontroller?
Choose the PIC24F08KL201-E/SO when the design needs a compact 20-pin SOIC controller with a 16-bit PIC core, 32 MHz operation, 8 KB Flash, 512 bytes of RAM, MSSP serial interfaces, and CCP timing functions. It is especially suitable for cost-sensitive, low-power embedded products. Select a different family member if the design needs more memory, additional I/O, different communication peripherals, a different package, or broader temperature-range qualifications.
Is the PIC24F08KL201-E/SO suitable for motor control applications?
The PIC24F08KL201-E/SO can support basic motor-control and PWM functions because its CCP peripherals provide capture, compare, and PWM capabilities, and its 16 MIPS performance handles modest control tasks. The device is appropriate for small fan, pump, valve, or actuator-control loops where the motor does not require a dedicated high-performance motor-control IC. Validate current capability, switching noise, protection, and thermal performance in the power stage.
How do I compare the PIC24F08KL201-E/SO with PIC24FV08KM101-E/SS?
The PIC24F08KL201-E/SO and PIC24FV08KM101-E/SS do not form a drop-in pair because their package outlines differ: the target uses a 20-pin SOIC, while PIC24FV08KM101-E/SS uses an SSOP package. Their MCU families and peripheral resources also require separate datasheet and firmware review. The comparison is useful for architecture and memory selection, but PCB changes and migration testing are required because the physical pin mapping cannot be assumed interchangeable.
What are the key specifications of the PIC24F08KL201-E/SO that engineers should know?
The key specifications are a 16-bit PIC24F core, 32 MHz maximum operating frequency, 16 MIPS performance, 8 KB Flash program memory organized as 2.75K x 24 bits, 512 bytes of RAM, and a 20-pin SOIC package. The device also provides MSSP support for I2C and SPI, CCP capture, compare, and PWM functions, and nanoWatt XLP low-power technology. These parameters place it between simple 8-bit controllers and larger 16-bit MCU platforms.

工程参考数据: PIC24F08KL201-E/SO ——对比、设计指导和合规信息。

选型指南

Choose the PIC24F08KL201-E/SO for a compact, cost-sensitive embedded design that needs a 16-bit core, 32 MHz operation, 8 KB Flash, 512 bytes of RAM, MSSP support for I2C or SPI, CCP timing functions, and a 20-pin SOIC footprint. Its nanoWalt XLP technology is also attractive for duty-cycled and battery-operated products. A larger PIC24 device is preferable when firmware size, RAM, I/O count, or peripheral breadth exceeds this controller’s capacity. A different package should be selected when board area or assembly requirements rule out the 20-pin SOIC outline. Do not choose a cross-family substitute solely by clock speed or memory size; firmware architecture, peripheral mapping, pin compatibility, tooling, and qualification must be reviewed before replacement approval.

与替代料对比

参数 本产品
Package 20-pin SOIC
Brand Microchip Technology
Core Architecture 16-bit PIC24F core
Maximum Operating Frequency 32 MHz
Performance 16 MIPS
Flash Program Memory 8 KB, organized as 2.75K x 24 bits
Data Memory 512 x 8 bytes RAM
Serial Peripherals MSSP supporting I2C and SPI
Low-Power Feature nanoWatt XLP

设计说明

Route the 20-pin SOIC footprint only after checking the manufacturer’s exact package drawing and pin table. Place input/output bypass capacitors close to their associated power pins, provide a clean ground reference, and avoid long traces between the MCU and serial-bus devices. Keep programming and debug access available on the board when the design will require field firmware updates.

The listed supply voltage is 3 V, so the power architecture must maintain the manufacturer’s operating limits across temperature, load, and startup transients. Decouple each supply connection locally and keep switching-converter nodes away from sensitive analog or communication traces. For battery operation, measure the complete duty cycle because the XLP advantage depends on firmware sleep duration, peripheral state, and the time the MCU remains awake.

Do not treat a controller with similar memory capacity as a drop-in replacement. Validate every pin assignment, alternate function, interrupt vector, peripheral behavior, and development-tool requirement. The PIC24F08KL201-E/SO uses a 20-pin SOIC outline, so SSOP and other package variants require PCB changes. Confirm the exact -E/SO temperature and qualification requirements before committing the design to production.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Compliance status must be confirmed for the exact -E/SO ordering variant using the manufacturer product page and current material declarations.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

PIC24F08KL201-E/SO PIC24F08KL201-E/SO datasheet PIC24F08KL201-E/SO pinout PIC24F08KL201 datasheet pdf PIC24F08KL201 equivalent PIC24F08KL201 drop-in replacement PIC24F08KL201-E/SO SOIC footprint PIC24F08KL201-E/SO price PIC24F08KL201-E/SO stock Microchip PIC24F08KL201-E/SO PIC24F08KL201 32MHz specifications PIC24F08KL201 I2C SPI application

相关元器件 & 术语

Microchip Technology PIC24F08KL201-E/SO PIC24F08KL201 PIC24F 16-bit microcontroller embedded controller microcontroller IC semiconductor PIC24F core nanoWatt XLP eXtreme Low Power MSSP I2C SPI CCP capture compare PWM Flash program memory static RAM 32 MHz 16 MIPS 20-pin SOIC surface-mount package industrial control sensor node battery-powered control
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情