PIC24F08KL302-E/MQ - 32MHz 16-bit MCU | Microchip
料号: PIC24F08KL302-E/MQ ✓ 量产中PIC24F08KL302-E/MQ 概述
A microcontroller is a programmable system-on-chip that integrates a processor core, program memory, data memory, peripherals, and communication interfaces. The PIC24F architecture combines a 16-bit instruction set with cost-sensitive embedded control, while the KL family adds nanoWatt XLP capabilities intended to reduce current consumption during inactive operating modes. The -E/MQ suffix identifies an automotive-temperature device supplied in the QFN package.
The device provides 8 KB of Flash memory organized as 2.75K x 24 words and 1 KB of data RAM. Its feature set includes Master Synchronous Serial Port support for I2C and SPI, plus Capture/Compare and Enhanced Capture/Compare peripherals for timing, motor-control, and general event-measurement tasks. These interfaces allow the MCU to connect sensors, actuators, displays, and serial peripherals while reducing the need for external components.
The PIC24F08KL302-E/MQ operates at up to 32 MHz using an internal oscillator. This processing capability is appropriate for compact control systems that require deterministic peripheral handling, moderate computation, and multiple communication functions. Its 256 bytes of EEPROM provides nonvolatile storage for small quantities of calibration values, configuration parameters, or diagnostic records without consuming RAM.
Typical applications include low-cost automotive control modules, industrial sensor nodes, building-control interfaces, compact power converters, and connected peripheral equipment. The 28-QFN format supports space-constrained boards, while the combination of MSSP and CCP/ECCP peripherals is particularly useful in designs that need both serial connectivity and accurate timing functions.
PCB implementation should follow the manufacturer pin-definition table and land-pattern guidance exactly. Confirm all 28 terminals, the exposed thermal pad requirements, decoupling, clock configuration, and programming connections before release. Pay particular attention to automotive temperature qualification, EMC layout, grounding, and the decoupling network when using this device in a vehicle or other electrically demanding environment.
This page consolidates the available manufacturer and distribution information into an engineer-oriented reference covering memory architecture, package details, interface capabilities, application fit, drop-in considerations, and practical PCB guidance.
直接替换替代料: PIC24F08KL302-E/MQ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PIC24F08KL302-E/MQ (相同外形与封装尺寸) ——差异在于 Mounting Type, Package.
PIC24F08KL302-I/MQ
✅ 直接替换联系询价
查看数据手册 →PIC24F08KL302-E/MQ 最大额定值与电气特性
| Microcontroller Type | 16-bit Flash Microcontroller |
| Product Family | PIC24F KL |
| Maximum CPU Frequency | 32 MHz |
| Flash Program Memory | 8 KB |
| Program Memory Organization | 2.75K x 24 words |
| RAM | 1 KB |
| EEPROM | 256 bytes |
| Oscillator | Internal oscillator |
| Serial Interface | MSSP supporting I2C and SPI |
| Timer/Capture Compare Peripherals | CCP and ECCP |
| Low-Power Technology | nanoWatt XLP |
| 封装 | 28-QFN (5 x 5 mm) |
| Terminal Count | 28 terminals |
| 安装类型 | No-lead surface mount |
| Temperature Grade | Automotive |
| 电源电压 | 3 V |
PIC24F08KL302-E/MQ 28-qfn (5 x 5 mm) 引脚配置指南
PIC24F08KL302-E/MQ(28-qfn (5 x 5 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: PIC24F08KL302-E/MQ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PIC24F08KL302-E/MQ 适用于 6 应用s: Automotive Sensor Interface, Industrial Sensor Node, Building Control Module, Compact Power Converter Control, Serial Data Logger, Connected Peripheral Controller.
Automotive Sensor Interface
PIC24F08KL302-E/MQ fits compact vehicle sensor modules that need local signal acquisition, configuration storage, and serial communication in an automotive temperature grade. Its 16-bit PIC24F core operates at up to 32 MHz, while 1 KB of RAM supports short control buffers and 256 bytes of EEPROM can retain calibration or diagnostic values. The MSSP provides I2C or SPI connectivity for compatible sensors, and CCP/ECCP can support timing or edge-sensitive input functions. This combination allows a small module to manage several sensors without a separate communications processor, although the final design must meet the vehicle-specific EMC, temperature, and qualification requirements.
推荐
Industrial Sensor Node
PIC24F08KL302-E/MQ is well matched to industrial sensor nodes that periodically acquire measurements and report them over a serial bus. Its 32 MHz PIC24F core provides enough performance for peripheral coordination and local control, while 8 KB of Flash supports compact embedded firmware and 1 KB of RAM accommodates working variables. The MSSP supports I2C or SPI for sensors, registers, and external nonvolatile memory, while nanoWalt XLP technology provides low-power design options. In battery-operated equipment, duty cycle and sleep-state selection determine energy use, so the complete power budget should include sensor and interface leakage as well as MCU consumption.
推荐
Building Control Module
PIC24F08KL302-E/MQ can serve as the local controller in a compact building-control module that coordinates sensors, actuators, and a serial network. The CCP and ECCP peripherals are useful for measuring periods, generating timing signals, and implementing basic motor or valve-control functions. Its MSSP permits I2C or SPI connections to environmental sensors and digital I/O expanders, while EEPROM preserves configuration values such as addresses, calibration factors, or operating schedules. The 28-QFN footprint preserves PCB area in compact controllers, but grounding, isolation, surge protection, and cable-interface design must be handled at the board level.
推荐
Compact Power Converter Control
PIC24F08KL302-E/MQ can supervise a compact switched-mode power converter where fast timing, stable control, and low standby consumption are important. The CCP/ECCP hardware can implement timing functions associated with power conversion, while the 32 MHz core can supervise fault states and manage communications with a supervisory system. The MSSP supports connection to a digital monitor, current-sense device, or configuration EEPROM. Because the controller operates near a switching power stage, layout must separate sensitive signal paths from high-current switching nodes and provide appropriate filtering, isolation, and protection according to the converter topology.
推荐
Serial Data Logger
PIC24F08KL302-E/MQ fits a small serial data logger that receives sensor or system events through MSSP and stores selected configuration or diagnostic data. Its 256 bytes of EEPROM is appropriate for limited nonvolatile records, while 1 KB of RAM can support buffering and protocol processing. The 28-QFN package helps minimize board area in distributed logging nodes, and nanoWalt XLP features can reduce consumption when the logger is idle. Firmware must define a safe wear strategy for EEPROM because repeated logging can exceed its endurance; a controlled write interval and RAM-backed batching reduce unnecessary wear.
推荐
Connected Peripheral Controller
PIC24F08KL302-E/MQ is appropriate for a connected peripheral that must manage a sensor or actuator, local configuration, and an embedded serial interface. The MSSP supports either I2C or SPI depending on the selected peripheral ecosystem, and the 16-bit architecture supports moderate control logic in a cost-sensitive design. Its 8 KB Flash capacity favors compact firmware with focused functionality, while the 28-QFN package is useful for space-constrained equipment. The design should use the manufacturer alternate-function table to avoid peripheral conflicts and should isolate long external cables with the appropriate board-level protection.
推荐
推荐产品汇总
工程参考数据: PIC24F08KL302-E/MQ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC24F08KL302-I/MQ |
|---|---|---|
| Manufacturer | Microchip Technology | Microchip Technology |
| Package | 28-QFN (5 x 5 mm) | 28-QFN (5 x 5 mm) |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Flash Program Memory | 8 KB | 8 KB |
| Program Memory Organization | 2.75K x 24 words | 2.75K x 24 words |
| RAM | 1 KB | 1 KB |
| EEPROM | 256 bytes | 256 bytes |
| Temperature Grade | Automotive | Industrial |
| Serial Interface | MSSP supporting I2C and SPI | MSSP supporting I2C and SPI |
| Low-Power Feature | nanoWatt XLP | nanoWatt XLP |
关键差异点
- Automotive temperature-grade suffix (对比 PIC24F08KL302-I/MQ)
- Same-footprint migration path (对比 PIC24F08KL302-I/MQ)
- Integrated low-power and serial-control resources (对比 PIC24F08KL302-I/MQ)
设计说明
Route the 28-QFN footprint, exposed pad, and all 28 terminals exactly as specified in the Microchip package drawing. Place input and bulk decoupling capacitors at their designated power pins with the shortest possible return paths. Keep the footprint inside the manufacturer land-pattern limits and verify paste, solder mask, and assembly-capable pad geometry with the fabricator before releasing the PCB.
Do not interchange the -E and -I temperature-grade suffix without reviewing the exact operating limits and qualification requirements. The two parts share the same core configuration and package, so software and routing may appear interchangeable, but environmental suitability can differ. Also verify alternate-function assignments for MSSP and CCP/ECCP because using the same peripheral simultaneously can create pin conflicts or prevent an expected operating mode.
Calculate the average current from the processor activity, timer operation, MSSP transfers, active peripherals, and the selected nanoWalt XLP sleep state. Apply the relevant operating voltage from the manufacturer datasheet when comparing sleep-mode and active-mode consumption. For battery-powered nodes, include sensor standby current, pull-up resistors, regulator quiescent current, and board leakage because the MCU alone does not determine total service life.
Keep clock, programming, and communication routes away from noisy switching nodes and long high-current traces. Provide a clean return path beneath the device where the package guidance permits, and use local decoupling rather than a distant capacitor bank. In automotive or industrial systems, apply the appropriate chassis, surge, and ESD protection at connector entries so transient energy does not propagate directly into the MCU pins.
合规信息
The -E suffix identifies an automotive temperature grade, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was included in the available product information. Confirm these requirements using the manufacturer compliance and qualification documentation.