Microchip Technology

PIC24F08KL302-E/MQ - 32MHz 16-bit MCU | Microchip

MPN: PIC24F08KL302-E/MQ ✓ Hoạt động
3 V Vdss 28-QFN (5 x 5 mm) Package 32 MHz Speed 8 KB Memory
MOQ: 1 |

PIC24F08KL302-E/MQ Tóm tắt

The Microchip Technology PIC24F08KL302-E/MQ is a cost-effective 16-bit PIC24F microcontroller with a 32 MHz operating speed, 8 KB of Flash program memory, 1 KB of RAM, and 256 bytes of EEPROM in a 28-QFN package measuring 5 x 5 mm. It belongs to the PIC24F family, whose nanoWatt XLP technology targets low-power embedded designs.

A microcontroller is a programmable system-on-chip that integrates a processor core, program memory, data memory, peripherals, and communication interfaces. The PIC24F architecture combines a 16-bit instruction set with cost-sensitive embedded control, while the KL family adds nanoWatt XLP capabilities intended to reduce current consumption during inactive operating modes. The -E/MQ suffix identifies an automotive-temperature device supplied in the QFN package.

The device provides 8 KB of Flash memory organized as 2.75K x 24 words and 1 KB of data RAM. Its feature set includes Master Synchronous Serial Port support for I2C and SPI, plus Capture/Compare and Enhanced Capture/Compare peripherals for timing, motor-control, and general event-measurement tasks. These interfaces allow the MCU to connect sensors, actuators, displays, and serial peripherals while reducing the need for external components.

The PIC24F08KL302-E/MQ operates at up to 32 MHz using an internal oscillator. This processing capability is appropriate for compact control systems that require deterministic peripheral handling, moderate computation, and multiple communication functions. Its 256 bytes of EEPROM provides nonvolatile storage for small quantities of calibration values, configuration parameters, or diagnostic records without consuming RAM.

Typical applications include low-cost automotive control modules, industrial sensor nodes, building-control interfaces, compact power converters, and connected peripheral equipment. The 28-QFN format supports space-constrained boards, while the combination of MSSP and CCP/ECCP peripherals is particularly useful in designs that need both serial connectivity and accurate timing functions.

PCB implementation should follow the manufacturer pin-definition table and land-pattern guidance exactly. Confirm all 28 terminals, the exposed thermal pad requirements, decoupling, clock configuration, and programming connections before release. Pay particular attention to automotive temperature qualification, EMC layout, grounding, and the decoupling network when using this device in a vehicle or other electrically demanding environment.

This page consolidates the available manufacturer and distribution information into an engineer-oriented reference covering memory architecture, package details, interface capabilities, application fit, drop-in considerations, and practical PCB guidance.

Bộ thay thế dễ dàng lắp đặt cho PIC24F08KL302-E/MQ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC24F08KL302-E/MQ (cùng hình factor và footprint) — khác nhau ở Mounting Type, Package.

Microchip Technology
Mounting Type: Surface Mount
Package: 28-pin QFN (MQ) 5x5 mm

PIC24F08KL302-I/MQ

✅ Drop-In
Microchip Technology
📦 28-QFN (5 x 5 mm)
PIC24F KL302 · PIC24 16-bit · MIPS16e (16-bit data / 24-bit instruction) · 8 KB (2.75K x 24) · 1 KB · 256 B · 32 MHz (16 MIPS) · 1.8 V to 3.6 V

Liên hệ để biết giá

Xem tài liệu →

PIC24F08KL302-E/MQ Tỷ lệ tối đa & tính chất điện

Microcontroller Type 16-bit Flash Microcontroller
Product Family PIC24F KL
Maximum CPU Frequency 32 MHz
Flash Program Memory 8 KB
Program Memory Organization 2.75K x 24 words
RAM 1 KB
EEPROM 256 bytes
Oscillator Internal oscillator
Serial Interface MSSP supporting I2C and SPI
Timer/Capture Compare Peripherals CCP and ECCP
Low-Power Technology nanoWatt XLP
Hộp 28-QFN (5 x 5 mm)
Terminal Count 28 terminals
Kiểu lắp đặt No-lead surface mount
Temperature Grade Automotive
Điện áp cung cấp 3 V

Hướng dẫn cấu hình chân PIC24F08KL302-E/MQ 28-qfn (5 x 5 mm)

Cấu hình chân cho PIC24F08KL302-E/MQ (28-qfn (5 x 5 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 28-qfn (5 x 5 mm) cho PIC24F08KL302-E/MQ

Không có dữ liệu chân cụ thể sẵn có cho PIC24F08KL302-E/MQ.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

PIC24F08KL302-E/MQ phù hợp cho 6 Áp dụngs: Automotive Sensor Interface, Industrial Sensor Node, Building Control Module, Compact Power Converter Control, Serial Data Logger, Connected Peripheral Controller.

🚗

Automotive Sensor Interface

PIC24F08KL302-E/MQ fits compact vehicle sensor modules that need local signal acquisition, configuration storage, and serial communication in an automotive temperature grade. Its 16-bit PIC24F core operates at up to 32 MHz, while 1 KB of RAM supports short control buffers and 256 bytes of EEPROM can retain calibration or diagnostic values. The MSSP provides I2C or SPI connectivity for compatible sensors, and CCP/ECCP can support timing or edge-sensitive input functions. This combination allows a small module to manage several sensors without a separate communications processor, although the final design must meet the vehicle-specific EMC, temperature, and qualification requirements.

🏭

Industrial Sensor Node

PIC24F08KL302-E/MQ is well matched to industrial sensor nodes that periodically acquire measurements and report them over a serial bus. Its 32 MHz PIC24F core provides enough performance for peripheral coordination and local control, while 8 KB of Flash supports compact embedded firmware and 1 KB of RAM accommodates working variables. The MSSP supports I2C or SPI for sensors, registers, and external nonvolatile memory, while nanoWalt XLP technology provides low-power design options. In battery-operated equipment, duty cycle and sleep-state selection determine energy use, so the complete power budget should include sensor and interface leakage as well as MCU consumption.

🏠

Building Control Module

PIC24F08KL302-E/MQ can serve as the local controller in a compact building-control module that coordinates sensors, actuators, and a serial network. The CCP and ECCP peripherals are useful for measuring periods, generating timing signals, and implementing basic motor or valve-control functions. Its MSSP permits I2C or SPI connections to environmental sensors and digital I/O expanders, while EEPROM preserves configuration values such as addresses, calibration factors, or operating schedules. The 28-QFN footprint preserves PCB area in compact controllers, but grounding, isolation, surge protection, and cable-interface design must be handled at the board level.

⚡

Compact Power Converter Control

PIC24F08KL302-E/MQ can supervise a compact switched-mode power converter where fast timing, stable control, and low standby consumption are important. The CCP/ECCP hardware can implement timing functions associated with power conversion, while the 32 MHz core can supervise fault states and manage communications with a supervisory system. The MSSP supports connection to a digital monitor, current-sense device, or configuration EEPROM. Because the controller operates near a switching power stage, layout must separate sensitive signal paths from high-current switching nodes and provide appropriate filtering, isolation, and protection according to the converter topology.

🖥️

Serial Data Logger

PIC24F08KL302-E/MQ fits a small serial data logger that receives sensor or system events through MSSP and stores selected configuration or diagnostic data. Its 256 bytes of EEPROM is appropriate for limited nonvolatile records, while 1 KB of RAM can support buffering and protocol processing. The 28-QFN package helps minimize board area in distributed logging nodes, and nanoWalt XLP features can reduce consumption when the logger is idle. Firmware must define a safe wear strategy for EEPROM because repeated logging can exceed its endurance; a controlled write interval and RAM-backed batching reduce unnecessary wear.

🧩

Connected Peripheral Controller

PIC24F08KL302-E/MQ is appropriate for a connected peripheral that must manage a sensor or actuator, local configuration, and an embedded serial interface. The MSSP supports either I2C or SPI depending on the selected peripheral ecosystem, and the 16-bit architecture supports moderate control logic in a cost-sensitive design. Its 8 KB Flash capacity favors compact firmware with focused functionality, while the 28-QFN package is useful for space-constrained equipment. The design should use the manufacturer alternate-function table to avoid peripheral conflicts and should isolate long external cables with the appropriate board-level protection.

What are the key specifications of PIC24F08KL302-E/MQ that engineers should know?
The PIC24F08KL302-E/MQ combines a 32 MHz maximum CPU frequency, 8 KB of Flash program memory, 1 KB of RAM, and 256 bytes of EEPROM in a 28-QFN package. According to the Microchip product information, it is a 16-bit PIC24F KL-series microcontroller with nanoWatt XLP low-power technology, MSSP support for I2C and SPI, and CCP/ECCP timing peripherals. It is positioned for cost-sensitive embedded applications requiring compact packaging and a broad set of communication and timing functions.
What is PIC24F08KL302-E/MQ and what does it do?
PIC24F08KL302-E/MQ is a 16-bit Flash microcontroller from the Microchip Technology PIC24F family. It executes firmware at up to 32 MHz and provides 8 KB of program Flash, 1 KB of RAM, and 256 bytes of EEPROM. According to Microchip, the device combines nanoWalt XLP low-power operation with MSSP I2C/SPI communication and CCP/ECCP peripherals, making it suitable for compact automotive, industrial, sensor, and control applications.
How much Flash and RAM does PIC24F08KL302-E/MQ have?
PIC24F08KL302-E/MQ has 8 KB of Flash program memory organized as 2.75K x 24 words, 1 KB of data RAM, and 256 bytes of EEPROM. The Microchip product listing and distributor specifications identify this exact memory configuration. Designers should budget Flash for application firmware and configuration code, use RAM for working variables, and reserve EEPROM for small nonvolatile records such as calibration settings, counters, or configuration values.
Where can I download the PIC24F08KL302-E/MQ datasheet PDF?
The official PIC24F08KL302-E/MQ documentation is available through the Microchip product page at https://www.microchip.com/en-us/product/PIC24F08KL302. Open the product page and select its datasheet or documentation resources. For board-level implementation, use the manufacturer pin-definition table and package drawing to verify the 28-QFN terminals, exposed pad treatment, recommended land pattern, and decoupling requirements.
Where can I find the PIC24F08KL302-E/MQ pinout?
The authoritative PIC24F08KL302-E/MQ pinout appears in the manufacturer datasheet and package documentation linked from the Microchip product page. The component uses a 28-QFN package, so every terminal and the exposed-pad requirement must be checked against that documentation before routing the PCB. Use the pin-description table when assigning power, ground, reset, programming, oscillator, I2C, SPI, and timer signals; do not infer assignments from an unrelated 28-pin MCU.
Is PIC24F08KL302-E/MQ suitable for automotive applications?
PIC24F08KL302-E/MQ is identified as an automotive-temperature-grade device in the component listing, making it suitable for automotive control designs when all application-specific electrical, environmental, and qualification requirements are met. Its 32 MHz CPU, 1 KB RAM, 256-byte EEPROM, I2C/SPI MSSP, and CCP/ECCP peripherals support compact embedded automotive functions. Confirm the exact temperature limits and qualification documentation in the Microchip datasheet before production release.
What is the difference between PIC24F08KL302-E/MQ and PIC24F08KL302-I/MQ?
PIC24F08KL302-E/MQ and PIC24F08KL302-I/MQ share the PIC24F08KL302 base device, 28-QFN package, 32 MHz maximum frequency, 8 KB Flash, 1 KB RAM, and 256-byte EEPROM configuration. The principal documented distinction is the temperature-grade suffix: -E is automotive, while -I identifies the industrial grade. Because the exact temperature limits are not listed in the product snippets, verify them in the manufacturer datasheet before substituting one grade for another.
Can PIC24F08KL302-I/MQ replace PIC24F08KL302-E/MQ?
PIC24F08KL302-I/MQ is the closest documented drop-in candidate because it retains the same 28-QFN package, 32 MHz maximum CPU frequency, 8 KB Flash, 1 KB RAM, 256-byte EEPROM, and PIC24F08KL302 device family. The meaningful difference is the temperature grade: -I is industrial and -E is automotive. It is therefore mechanically and electrically compatible, but it should replace the automotive-grade part only when the required operating-temperature range and qualification criteria are satisfied.
What is the best drop-in replacement for PIC24F08KL302-E/MQ?
PIC24F08KL302-I/MQ is the best documented drop-in candidate for PIC24F08KL302-E/MQ because both use the 28-QFN package and retain the same 32 MHz CPU, 8 KB Flash, 1 KB RAM, and 256-byte EEPROM configuration. The tradeoff is temperature grade: the -E version is automotive, while the -I version is industrial. No verified cross-brand drop-in equivalent was identified, so the replacement decision should remain within the documented Microchip family.
When should I choose PIC24F08KL302-E/MQ instead of PIC24F08KL302-I/MQ?
Choose PIC24F08KL302-E/MQ when the product requires the automotive temperature grade and the -E suffix satisfies the environmental and qualification plan. Choose PIC24F08KL302-I/MQ for industrial-temperature designs where automotive-grade requirements are unnecessary. Both maintain the same 28-QFN footprint and core memory configuration, so firmware and PCB layout can remain unchanged, but the temperature limits must be checked against the worst-case enclosure and ambient conditions.
Is PIC24F08KL302-E/MQ suitable for low-power sensor nodes?
PIC24F08KL302-E/MQ is suitable for many low-power sensor-node designs because it combines nanoWalt XLP low-power features with an internal oscillator, 1 KB RAM, 256-byte EEPROM, and serial interfaces for sensors. Its MSSP can connect I2C or SPI devices while CCP/ECCP can handle timing tasks. Actual battery life depends on the selected sleep mode, duty cycle, sensor load, and board leakage, so calculate the complete average current rather than relying only on the microcontroller specification.
Can PIC24F08KL302-E/MQ control an I2C or SPI sensor?
Yes, PIC24F08KL302-E/MQ includes an MSSP peripheral identified by Microchip as supporting both I2C and SPI. This makes it suitable for connecting temperature sensors, EEPROMs, ADC peripherals, displays, and other serial devices. The choice between I2C and SPI should reflect bus speed, wiring distance, peripheral availability, and required pin multiplexing. Verify the exact peripheral pin assignments and alternate-function limitations in the manufacturer pin table before finalizing the PCB.
What can replace PIC24F08KL302-E/MQ?
PIC24F08KL302-I/MQ can serve as a pin-compatible replacement when industrial temperature grading is acceptable, because both devices use the 28-QFN package and share the 32 MHz maximum speed, 8 KB Flash, 1 KB RAM, and 256-byte EEPROM configuration. No verified cross-brand substitute was found with sufficient pin and parameter evidence. Treat the -I part as the documented same-footprint alternative, but verify temperature limits, qualification, and software device configuration before production use.
Is PIC24F08KL302-E/MQ the same as PIC24F08KL302-I/MQ?
PIC24F08KL302-E/MQ and PIC24F08KL302-I/MQ are not identical in temperature grade, although they share the same base PIC24F08KL302 configuration and 28-QFN package. The -E/MQ version is automotive grade, while the -I/MQ version is industrial grade. Both are listed with 32 MHz maximum operation, 8 KB Flash, 1 KB RAM, and 256 bytes of EEPROM, allowing the same hardware footprint and largely the same firmware organization.
Where can I buy PIC24F08KL302-E/MQ and check its current lead time?
Use the Request a Quote form on this XAIPART product page to request current availability, lead time, and order quantities for PIC24F08KL302-E/MQ. The component is a 28-QFN, 32 MHz PIC24F microcontroller with 8 KB Flash, 1 KB RAM, and 256 bytes of EEPROM. A quote request allows the order details to be checked against the exact suffix and package rather than relying on a generic PIC24F listing.

Dữ liệu tham khảo kỹ thuật cho PIC24F08KL302-E/MQ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose PIC24F08KL302-E/MQ for designs that specifically require the automotive temperature grade and a compact 28-QFN controller with 32 MHz performance, 8 KB Flash, 1 KB RAM, and 256 bytes of EEPROM. PIC24F08KL302-I/MQ is the practical drop-in choice when industrial grading is sufficient, because it retains the same footprint, memory configuration, processor speed, MSSP interfaces, and CCP/ECCP resources. The suffix distinction is the primary engineering tradeoff; confirm the exact temperature range, qualification status, and production requirements in the manufacturer documentation. No verified cross-brand replacement was identified with enough pin-level and parametric evidence to recommend a direct substitution.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này PIC24F08KL302-I/MQ
Manufacturer Microchip Technology Microchip Technology
Package 28-QFN (5 x 5 mm) 28-QFN (5 x 5 mm)
Maximum CPU Frequency 32 MHz 32 MHz
Flash Program Memory 8 KB 8 KB
Program Memory Organization 2.75K x 24 words 2.75K x 24 words
RAM 1 KB 1 KB
EEPROM 256 bytes 256 bytes
Temperature Grade Automotive Industrial
Serial Interface MSSP supporting I2C and SPI MSSP supporting I2C and SPI
Low-Power Feature nanoWatt XLP nanoWatt XLP

Bảo phân biệt quan trọng

  • Automotive temperature-grade suffix (vsPIC24F08KL302-I/MQ)
  • Same-footprint migration path (vsPIC24F08KL302-I/MQ)
  • Integrated low-power and serial-control resources (vsPIC24F08KL302-I/MQ)

Ghi chú thiết kế

Route the 28-QFN footprint, exposed pad, and all 28 terminals exactly as specified in the Microchip package drawing. Place input and bulk decoupling capacitors at their designated power pins with the shortest possible return paths. Keep the footprint inside the manufacturer land-pattern limits and verify paste, solder mask, and assembly-capable pad geometry with the fabricator before releasing the PCB.

Do not interchange the -E and -I temperature-grade suffix without reviewing the exact operating limits and qualification requirements. The two parts share the same core configuration and package, so software and routing may appear interchangeable, but environmental suitability can differ. Also verify alternate-function assignments for MSSP and CCP/ECCP because using the same peripheral simultaneously can create pin conflicts or prevent an expected operating mode.

Calculate the average current from the processor activity, timer operation, MSSP transfers, active peripherals, and the selected nanoWalt XLP sleep state. Apply the relevant operating voltage from the manufacturer datasheet when comparing sleep-mode and active-mode consumption. For battery-powered nodes, include sensor standby current, pull-up resistors, regulator quiescent current, and board leakage because the MCU alone does not determine total service life.

Keep clock, programming, and communication routes away from noisy switching nodes and long high-current traces. Provide a clean return path beneath the device where the package guidance permits, and use local decoupling rather than a distant capacitor bank. In automotive or industrial systems, apply the appropriate chassis, surge, and ESD protection at connector entries so transient energy does not propagate directly into the MCU pins.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The -E suffix identifies an automotive temperature grade, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was included in the available product information. Confirm these requirements using the manufacturer compliance and qualification documentation.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

PIC24F08KL302-E/MQ datasheet PIC24F08KL302-E/MQ specifications PIC24F08KL302-E/MQ pinout PIC24F08KL302-E/MQ datasheet pdf PIC24F08KL302-E/MQ equivalent PIC24F08KL302-E/MQ replacement PIC24F08KL302-E/MQ footprint PIC24F08KL302-E/MQ price PIC24F08KL302-E/MQ stock Microchip PIC24F08KL302-E/MQ PIC24F08KL302-E/MQ vs PIC24F08KL302-I/MQ PIC24F08KL302 28-QFN pinout PIC24F08KL302 automotive sensor controller PIC24F08KL302 I2C SPI application PIC24F08KL302 32MHz 8KB flash

Các bộ phận và thuật ngữ liên quan

Microchip Technology PIC24F08KL302-E/MQ PIC24F08KL302-I/MQ PIC24F PIC24F KL PIC24F08KL302 16-bit microcontroller Flash microcontroller embedded controller semiconductor nanoWalt XLP nanoWalt XLP low-power technology MSSP I2C SPI CCP ECCP 28-QFN QFN package family surface-mount package 32 MHz 8 KB Flash memory 1 KB RAM 256-byte EEPROM automotive temperature grade
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ