PIC24FJ32GA002-E/SP - 16-Bit 32KB Flash MCU, 28-SPDIP | Microchip
料号： PIC24FJ32GA002-E/SP ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $3.42 | $3.42 |
| 10 | $3.08 | $30.80 |
| 100 | $2.74 | $274.00 |
| 500 | $2.41 | $1,205.00 |
| 1,000 | $2.07 | $2,070.00 |
PIC24FJ32GA002-E/SP 概述
A PIC microcontroller (Programmable Interface Controller) is a Harvard-architecture, RISC-based, single-chip microcomputer widely used in embedded systems. The PIC24F sub-family extends the 8-bit PIC core to a 16-bit data path with 16 working registers, a 17x17 single-cycle hardware multiplier, and a 32x16 hardware divider. This places PIC24F in the hierarchy: microcontroller -> 16-bit MCU -> RISC core -> embedded processor -> semiconductor. PIC24F parts are widely chosen for low-power sensor nodes, human-machine interfaces, and motor/lighting control where deterministic interrupt response and low quiescent current are required.
Key features of the PIC24FJ32GA002-E/SP include 21 general-purpose I/O pins, an 8 MHz internal oscillator with 4x PLL option and multiple divide options, four 16-bit timers, a 10-bit 500 ksps A/D converter with up to 10 channels, two UART/SPI/I2C peripherals, and a real-time clock/calendar (RTCC) module. The nanoWatt XLP technology drives sleep current into the microamp range, enabling battery-powered designs. The IC also offers an integrated voltage regulator and on-chip debugging via MPLAB ICD.
Architecturally, the PIC24FJ32GA002-E/SP implements a Modified Harvard architecture with separate program and data paths, allowing instruction fetch and data access in the same cycle. It supports 49 instructions with C-optimized encoding and a 16-bit working register array. The core delivers 16 MIPS at 32 MHz CPU clock, achieving 1.6 DMIPS/MHz-class efficiency for 16-bit embedded workloads while remaining code-density-friendly for C compilers (MPLAB XC16).
Typical applications include industrial sensor interfaces, USB/HID bridges, home automation controllers, portable medical devices, low-power IoT endpoints, and automotive body/comfort subsystems. The 32 KB Flash and 8 KB RAM are well-suited to RTOS-based designs (FreeRTOS port available) and to protocols such as Modbus, CAN (with external transceiver), and Bluetooth Low Energy (via companion module).
Designers should note that the 'E' suffix denotes the Enhanced temperature grade (-40C to +125C), making this part suitable for industrial and automotive non-safety applications. The 28-SPDIP package is socket-friendly for prototyping and field replacement, while the SOIC and QFN siblings offer reflow-compatible SMD footprints for production.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
直接替换替代料： PIC24FJ32GA002-E/SP ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PIC24FJ32GA002-E/SP （相同外形与封装尺寸） ——差异在于 Package, ADC, Operating Temperature, Core Architecture, Program Memory (Flash).
快速对比工具——选择替代料号进行并排对比：
PIC24FJ32GA002-I/SP
✅ 直接替换✓ 有现货
$2.31 / 个
查看数据手册 →PIC24FJ32GA004-E/SP
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
PIC24FJ16GA002-E/SP
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$2.85 / 个
查看数据手册 →PIC24FJ64GA002-E/SP
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$3.92 / 个
查看数据手册 →PIC24FJ32GA002-E/SO
✅ 直接替换✓ 有现货
$2.45 / 个
查看数据手册 →PIC24FJ32GA002-E/SS
✅ 直接替换✓ 有现货
$3.1 / 个
查看数据手册 →PIC24FJ32MC102-I/SO
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$2.54 / 个
查看数据手册 →PIC24FJ32GA002-E/SP 最大额定值与电气特性
| Core | PIC24F 16-bit RISC |
| CPU Speed | 32 MHz (16 MIPS) |
| Program Memory | 32 KB Flash (11K x 24) |
| RAM | 8 KB |
| Operating Voltage | 2.5 V / 3.3 V |
| 工作温度 | -40 C to +125 C (Enhanced grade, 'E' suffix) |
| 封装 | 28-pin SPDIP (0.300", 7.62 mm) |
| 安装类型 | Through Hole |
| Number of I/O | 21 |
| Internal Oscillator | 8 MHz with 4x PLL and multiple divide options |
| ADC | 10-bit, 500 ksps, up to 10 channels |
| Timers | Five 16-bit timers |
| Communication | 2x UART/SPI/I2C |
| Multiplier / Divider | 17x17 single-cycle hardware multiplier, 32/16 hardware divider |
| Low-Power Technology | nanoWatt XLP |
| Architecture | Modified Harvard |
| Instruction Set | 49 instructions, C compiler optimized |
| On-Chip Debug | Yes (MPLAB ICD) |
| RTCC | Yes (Real-Time Clock/Calendar) |
| RoHS 状态 | Compliant |
PIC24FJ32GA002-E/SP 引脚配置
| 引脚 1 | MCLR — Master Clear (reset) input, active low |
| 引脚 2 | RA0 — Port A bit 0 / AN0 (analog input) |
| 引脚 3 | RA1 — Port A bit 1 / AN1 |
| 引脚 4 | RA2 — Port A bit 2 / VREF- (ADC reference) |
| 引脚 5 | RA3 — Port A bit 3 / VREF+ |
| 引脚 6 | RA4 — Port A bit 4 |
| 引脚 7 | RA5 — Port A bit 5 |
| 引脚 8 | VSS — Ground |
| 引脚 9 | OSC1 — Crystal oscillator input |
| 引脚 10 | OSC2 — Crystal oscillator output |
| 引脚 11 | RB0 — Port B bit 0 / PGED1 (program data) |
| 引脚 12 | RB1 — Port B bit 1 / PGEC1 (program clock) |
| 引脚 13 | RB2 — Port B bit 2 |
| 引脚 14 | RB3 — Port B bit 3 |
| 引脚 15 | RB4 — Port B bit 4 |
| 引脚 16 | RB5 — Port B bit 5 |
| 引脚 17 | RB6 — Port B bit 6 / ICSP programming |
| 引脚 18 | RB7 — Port B bit 7 / ICSP programming |
| 引脚 19 | VSS — Ground |
| 引脚 20 | VDD — Positive supply voltage |
| 引脚 21 | RC0 — Port C bit 0 |
| 引脚 22 | RC1 — Port C bit 1 |
| 引脚 23 | RC2 — Port C bit 2 |
| 引脚 24 | RC3 — Port C bit 3 |
| 引脚 25 | RC4 — Port C bit 4 |
| 引脚 26 | RC5 — Port C bit 5 |
| 引脚 27 | RC6 — Port C bit 6 |
| 引脚 28 | RC7 — Port C bit 7 |
典型应用
PIC24FJ32GA002-E/SP 适用于 7 应用s: Industrial Sensor Interfaces, Battery-Powered IoT Endpoints, Home Automation Controllers, Portable Medical Devices, Automotive Body & Comfort Modules, USB HID Bridge with External Controller, Human-Machine Interface (HMI) Controllers.
Industrial Sensor Interfaces
The PIC24FJ32GA002-E/SP is well matched to industrial sensor interface nodes where the 16-bit ADC, 32 KB Flash, and nanoWatt XLP sleep mode deliver deterministic acquisition at sub-milliwatt average power. With 32 MIPS throughput and 10-bit 500 ksps ADC, it can digitize thermocouple, RTD, or strain-gauge signals and run linearization in firmware. Industrial-grade -40C to +125C operation supports cabinet, machine-bed, and outdoor enclosures, while the 28-SPDIP package is socket-friendly for field serviceability and rapid prototype iteration.
推荐
Battery-Powered IoT Endpoints
For battery-powered IoT endpoints, the PIC24FJ32GA002-E/SP's nanoWatt XLP technology drops sleep current into the microamp range, enabling multi-year coin-cell life when paired with periodic sensor wake events. The 32 KB Flash fits light BLE-through-UART stacks, Modbus slaves, or LoRaWAN device drivers, while the 8 KB RAM supports small RTOS configurations (FreeRTOS port available) for task scheduling. The RTCC module handles real-time wake/sleep timing without external RTC, further reducing BOM cost and standby current.
推荐
Home Automation Controllers
In home automation, the PIC24FJ32GA002-E/SP acts as a sub-controller for lighting, blinds, and HVAC actuators, with its 21 GPIO pins easily driving relays, TRIACs, and zero-cross detectors. The dual UART/SPI/I2C peripherals handle simultaneous connectivity to wireless modules (Sub-GHz, BLE, or Wi-Fi co-processors) and downstream sensor busses. C-compiler optimization plus 16 MIPS throughput is sufficient for protocol stacks like Modbus RTU, DMX-512, or KNX-like message handling in firmware.
推荐
Portable Medical Devices
The PIC24FJ32GA002-E/SP is well suited to portable medical peripherals (glucose meters, pulse oximeters, pill reminders) thanks to its low-power XLP operation and 16 MIPS of deterministic throughput for biosignal processing. The 10-bit ADC is sufficient for reflective pulse-ox sensor front ends, while the 32 KB Flash fits firmware stacks for IEC 62304-compliant Class A/B devices. The Enhanced temperature grade supports sanitization environments where -40C to +125C excursions are routine.
推荐
Automotive Body & Comfort Modules
Within automotive body and comfort subsystems (mirror controllers, seat heaters, lighting modules), the PIC24FJ32GA002-E/SP provides 32 MIPS processing for LIN-based body communication, 21 GPIO for relay/LED driving, and the -40C to +125C Enhanced temperature grade for under-dash and engine-bay-adjacent placement. Designers typically pair it with a LIN transceiver such as MCP2003 or MCP2025 for LIN 1.x/2.x slave implementations, where the 32 KB Flash handles the LIN state machine and diagnostic UDS services.
推荐
USB HID Bridge with External Controller
While the PIC24FJ32GA002-E/SP itself lacks USB, it can act as a UART/SPI-to-USB bridge companion when paired with the MCP2200 or MCP2221 USB-to-UART/USB-to-I2C bridge. The PIC24FJ32GA002-E/SP handles application logic, sensor I/O, and protocol glue while the bridge handles USB enumeration, descriptor handling, and HID class compliance. This topology is common for HID game controllers, HID barcode scanner interfaces, and HID-class industrial input devices where USB on the application MCU is unnecessary.
推荐
Human-Machine Interface (HMI) Controllers
For small HMI panels (keypads, multi-segment LED displays, character LCDs), the PIC24FJ32GA002-E/SP offers enough GPIO and UART bandwidth to drive matrix keypads, character LCDs, or LED segment drivers via I2C/SPI. The 16 MIPS throughput handles button debounce, menu state machines, and serial protocol glue (Modbus RTU slave, custom ASCII command interfaces). The 28-SPDIP package allows socket mounting for firmware-development swaps during prototyping and field maintenance.
推荐
推荐产品汇总
工程参考数据： PIC24FJ32GA002-E/SP ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC24FJ32GA002-I/SP | PIC24FJ32GA004-E/SP | PIC24FJ16GA002-E/SP | PIC24FJ64GA002-E/SP | PIC24FJ32GA002-E/SO | PIC24FJ32GA002-E/SS |
|---|---|---|---|---|---|---|---|
| Package | 28-SPDIP (through-hole) | 28-SPDIP - same | 28-SPDIP - same | 28-SPDIP - same | 28-SPDIP - same | 28-SOIC (SMD) | 28-SSOP (SMD) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash | 32 KB | 32 KB | 64 KB | 16 KB | 64 KB | 32 KB | 32 KB |
| RAM | 8 KB | 8 KB | 8 KB | 4 KB | 8 KB | 8 KB | 8 KB |
| Temperature Grade | Enhanced -40C to +125C | Industrial -40C to +85C | Enhanced -40C to +125C | Enhanced -40C to +125C | Enhanced -40C to +125C | Enhanced -40C to +125C | Enhanced -40C to +125C |
| CPU Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS |
| GPIO | 21 | 21 | 21 | 21 | 21 | 21 | 21 |
| ADC | 10-bit, 500 ksps, 10 ch | 10-bit, 500 ksps, 10 ch | 10-bit, 500 ksps, 10 ch | 10-bit, 500 ksps, 10 ch | 10-bit, 500 ksps, 10 ch | 10-bit, 500 ksps, 10 ch | 10-bit, 500 ksps, 10 ch |
| Unit Price (qty 1) | $3.42 | $3.20 | $3.85 | $3.05 | $4.10 | $3.42 | $3.55 |
关键差异点
- 28-SPDIP package enables socket-friendly prototyping （对比 PIC24FJ32GA002-E/SO (SOIC))
- Enhanced -40C to +125C temperature grade （对比 PIC24FJ32GA002-I/SP)
- nanoWatt XLP low-power technology （对比 Generic 16-bit MCUs without XLP)
设计说明
The PIC24FJ32GA002-E/SP operates from 2.5V to 3.3V. Decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of the VDD pin (pin 20) and a bulk 10 uF tantalum or ceramic at the supply entry point. For battery-powered designs, an MCP1700 LDO provides low-quiescent regulation. The on-chip voltage regulator is decoupled internally; only external VDD bypass is required.
Place the 28-SPDIP socket with pin 1 marker notch at top-left per JEDEC MS-001 outlines. Keep crystal traces short (<10 mm) and guard with a ground ring for noise immunity. If using the ICSP interface (RB6/RB7), keep the programming header accessible or include a 6-pin ICSP footprint for production programming. Reserve a 0-ohm jumper on the MCLR line for in-circuit debug isolation.
Do not exceed 3.6V on any I/O pin (absolute maximum per Microchip datasheet). Always tie unused I/O pins to either VDD or VSS through 10 kohm resistors to prevent floating-input shoot-through. When migrating from PIC24FJ32GA002-I/SP, confirm the application does not require +125C operation - the 'I' variant is rated only to +85C.
For analog performance, dedicate the AGND pin (pin 8 / VSS) plane to a quiet ground separate from digital switching returns, joining at a single point near the MCU. Place the ADC reference capacitor (typically 0.1 uF + 10 uF) close to the VREF+ pin (RA3 / pin 5) and VREF- (RA2 / pin 4) to minimize ADC noise. Do not route high-frequency digital signals directly under the analog package pins.
合规信息
RoHS compliant per Microchip product page. Industrial/Enhanced temperature grade -40C to +125C; not AEC-Q100 qualified. For AEC-Q100 automotive applications consider PIC24FJ-family automotive variants separately qualified.
