Microchip Technology

PIC24FJ64GA310-I/BG - 32MHz 16-Bit XLP Microcontroller | Microchip

料号: PIC24FJ64GA310-I/BG ✓ 量产中
2 V to 3.6 V Vdss 340 nA Id 121-TFBGA (10 x 10 mm) Package 32 MHz Speed Flash Memory
最小起订量: 1 |

PIC24FJ64GA310-I/BG 概述

The Microchip Technology PIC24FJ64GA310-I/BG is a 16-bit PIC24F microcontroller with a 32 MHz operating frequency, 64 KB of programmable Flash memory, and 8 KB of SRAM, packaged in a 121-ball TFBGA measuring 10 x 10 mm. It is designed for low-power embedded control and combines a modified Harvard architecture with 85 general-purpose I/O pins.

A 16-bit microcontroller is a programmable semiconductor that executes instructions from a 16-bit instruction set while using separate program and data memory paths. The PIC24F family sits within Microchip's 16-bit microcontroller portfolio and is commonly used for industrial control, portable instruments, connected equipment, and applications that require deterministic peripheral operation with low standby power.

The PIC24FJ64GA310-I/BG provides 64 KB of Flash memory organized as 22K x 24 words and 8 KB of SRAM. Its 32 MHz performance supports responsive control loops, while the 85 I/O pins provide extensive connectivity for sensors, displays, communication interfaces, and discrete actuators. The integrated analog and LCD-oriented capabilities broaden its usefulness in human-interface and battery-powered products.

The nanoWatt XLP design is central to this controller's low-power behavior. According to the Microchip product page, Low Voltage Sleep maintains device state and RAM while drawing a typical 340 nA, making the device suitable for designs in which long standby periods must not dominate battery life. A dedicated Vbat-related power option supports retention and backup-power strategies in portable equipment.

The -I/BG ordering code identifies the industrial-temperature, 121-ball TFBGA configuration. Operating voltage is specified from 2 V to 3.6 V. The 10 x 10 mm ball-grid footprint also supports compact PCB layouts, although its high pin count requires careful escape routing and multilayer board construction.

Typical uses include low-power control panels, battery-powered measurement instruments, industrial sensor nodes, LCD-driven user interfaces, and compact consumer appliances. Designers should reserve the 121-ball package's fine pitch for controlled manufacturing and follow Microchip's board-layout guidance for exposed-pad, decoupling, and high-speed signal routing.

This page combines device specifications, engineering application guidance, package information, and verified drop-in alternatives to support component selection, PCB planning, and sourcing decisions without duplicating the basic manufacturer catalogue listing.

直接替换替代料: PIC24FJ64GA310-I/BG ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

PIC24FJ64GA310-I/BG 最大额定值与电气特性

Product Type 16-bit Flash Microcontroller
Product Series PIC24F GA Series
Architecture 16-bit Modified Harvard
Maximum Operating Frequency 32 MHz
Program Memory Type Flash
Flash Memory 64 KB (22K x 24 words)
SRAM 8 KB (8K x 8)
General-Purpose I/O 85 pins
Operating Voltage Range 2 V to 3.6 V
Low Voltage Sleep Typical Current 340 nA
Low-Power Technology nanoWatt XLP
封装 121-TFBGA (10 x 10 mm)
Package Type Thin Fine-Pitch Ball Grid Array
安装类型 Surface Mount
Temperature Grade Industrial
LCD Capability LCD-oriented general-purpose microcontroller family

PIC24FJ64GA310-I/BG thin fine-pitch ball grid array 引脚配置指南

PIC24FJ64GA310-I/BG(thin fine-pitch ball grid array 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

PIC24FJ64GA310-I/BG 的 thin fine-pitch ball grid array 封装引脚图

暂无详细引脚数据: PIC24FJ64GA310-I/BG.

请参阅 数据手册 以查看完整引脚配置。

典型应用

PIC24FJ64GA310-I/BG 适用于 6 应用s: Battery-Powered Sensor Instruments, Industrial Control and Condition Monitoring, LCD-Driven Control Panels, Portable Medical and Wellness Devices, Connected Low-Power IoT Nodes, Compact Automotive and Accessory Modules.

🔋

Battery-Powered Sensor Instruments

The PIC24FJ64GA310-I/BG fits compact battery-powered instruments that acquire measurements, process them locally, and remain available for extended periods between interactions. Its 32 MHz execution rate supports responsive control and filtering, while 64 KB of Flash and 8 KB of SRAM provide room for application code and working data. The device's Low Voltage Sleep mode retains state and RAM at a typical 340 nA, enabling a more favorable duty-cycle strategy in which the MCU sleeps between samples. Keep the analog front end and sensor bias currents under control because they can consume more energy than the controller during standby.

🏭

Industrial Control and Condition Monitoring

The PIC24FJ64GA310-I/BG is appropriate for industrial condition-monitoring equipment that combines multiple digital inputs with analog sensing and a low-power communication strategy. Its 85 general-purpose I/O pins provide ample parallel connectivity, and the 2 V to 3.6 V operating range supports low-voltage system rails. A 32 MHz CPU core can execute protocol handling, filtering, and local alarms without requiring a separate processor. The industrial-grade ordering option should be evaluated against the complete family temperature range, while the 121-ball package demands a multilayer PCB and manufacturing process capable of handling its fine pitch.

📺

LCD-Driven Control Panels

The PIC24FJ64GA310-I/BG suits compact LCD control panels where display driving, button handling, and secondary control logic must share one low-power microcontroller. The PIC24FJ64GA310 family provides LCD-oriented resources, and the device's 85 I/O pins leave additional lines available for sensors, indicators, and communication. At 32 MHz, the controller can refresh the interface and execute background control tasks while keeping the display and backlight duty cycle under software control. Use the family pin-description table to map LCD functions and resolve peripheral conflicts before assigning the remaining pins.

💊

Portable Medical and Wellness Devices

The PIC24FJ64GA310-I/BG can serve as the control core in portable medical and wellness devices that combine a small display, sensor inputs, and infrequent user interaction. Its low 340 nA sleep current provides a useful starting point for energy-conscious designs, while the 2 V to 3.6 V operating range supports low-voltage power architectures. The 64 KB of Flash is appropriate for moderate embedded applications and 8 KB of SRAM supports short acquisition and processing buffers. Medical designs must add the application-specific isolation, safety, and validation requirements that are not provided by the MCU itself.

🧩

Connected Low-Power IoT Nodes

The PIC24FJ64GA310-I/BG is a suitable controller for compact connected nodes that periodically read sensors, process local state, and transmit results through an external radio. The 32 MHz core and 64 KB of Flash support protocol stacks and application logic, while the 121-ball package offers extensive I/O for radio control, indicators, and external analog functions. Its nanoWart XLP sleep behavior allows the MCU to remain active during radio transactions and enter a low-current state between them. Actual node lifetime depends on radio idle current, sensor duty cycle, and supply-circuit efficiency, so the entire power budget must be measured rather than relying on the MCU sleep figure alone.

🚗

Compact Automotive and Accessory Modules

The PIC24FJ64GA310-I/BG can be evaluated for compact accessory modules that require moderate processing, numerous I/O connections, and low standby consumption. Its 85 I/O pins simplify peripheral integration, and the 2 V to 3.6 V operating range is compatible with many automotive low-voltage rails when transient protection and regulation are provided externally. The -I/BG code identifies an industrial-grade variant rather than an automotive-qualified grade, so any vehicle application requires separate qualification against the relevant environmental, reliability, and functional-safety expectations. External reverse-battery, load-dump, and ESD protection must be designed around the board-level architecture.

推荐产品汇总

PIC24FJ64GA310-I/BG Microchip Technology 用于: Battery-Powered Sensor Instruments, Industrial Control and Condition Monitoring, LCD-Driven Control Panels, Portable Medical and Wellness Devices, Connected Low-Power IoT Nodes, Compact Automotive and Accessory Modules MCP3561RT-I/SN Low-power external ADC option 用于: Battery-Powered Sensor Instruments MCP3421A3-E/MC Low-power external ADC option 用于: Battery-Powered Sensor Instruments MCP3564RT-E/ST Microchip Technology 用于: Industrial Control and Condition Monitoring MCP6002-I/SN Microchip Technology 用于: Industrial Control and Condition Monitoring, Compact Automotive and Accessory Modules MCP3426A6-E/SN Microchip Technology 用于: LCD-Driven Control Panels, Connected Low-Power IoT Nodes MCP6001-E/SN Low-power signal conditioning option 用于: LCD-Driven Control Panels MCP3562RT-E/ST Microchip Technology 用于: Portable Medical and Wellness Devices MCP6041-I/MC Low-noise analog front-end option 用于: Portable Medical and Wellness Devices MCP3301RT-I/SN External low-power ADC option 用于: Connected Low-Power IoT Nodes MCP2551-I/SN External CAN transceiver option 用于: Compact Automotive and Accessory Modules
What are the key specifications of PIC24FJ64GA310-I/BG?
The PIC24FJ64GA310-I/BG is a 16-bit PIC24F microcontroller operating at up to 32 MHz with 64 KB of Flash, 8 KB of SRAM, and 85 general-purpose I/O pins. According to the Microchip PIC24FJ64GA310 product page, it also features nanoWalt XLP low-power operation, including a Low Voltage Sleep mode that retains device state and RAM at a typical 340 nA. The device operates from 2 V to 3.6 V and is packaged in a 121-TFBGA measuring 10 x 10 mm.
What is the operating voltage of PIC24FJ64GA310-I/BG?
The PIC24FJ64GA310-I/BG operates from 2 V to 3.6 V. This range matches the 1.8 V-capable architecture described for the PIC24FJ64GA310 family and allows operation from low-voltage battery rails after suitable regulation. Confirm the selected regulator's output tolerance and the device's absolute maximum voltage in the manufacturer datasheet before finalizing the power rail and bypass-capacitor network.
Where can I download the PIC24FJ64GA310-I/BG datasheet PDF?
The official PIC24FJ64GA310-I/BG documentation starts on the Microchip Technology product page at https://www.microchip.com/en-us/product/PIC24FJ64GA310. From that page, open the Data Sheet or Documentation section to obtain the manufacturer PDF covering the 64-pin, 80-pin, and 100-pin PIC24FJ64GA310 family. The family data sheet covers the 121-TFBGA configuration represented by the -I/BG ordering code.
Where is the pinout for PIC24FJ64GA310-I/BG located?
The pinout is located in the package and pin-description tables of the Microchip PIC24FJ64GA310 family data sheet. Select the 121-pin TFBGA column and match it to the -I/BG ordering code before assigning PCB nets. Because this is a 121-ball fine-pitch package, use the manufacturer's pinout, ball coordinates, and land-pattern guidance rather than creating the footprint from the generic package name alone.
What can replace the PIC24FJ64GA310-I/BG on an existing PCB?
A verified pin-to-pin drop-in replacement for the PIC24FJ64GA310-I/BG was not identified. Direct substitution requires the same 121-TFBGA footprint, matching ball assignments, equivalent memory organization, compatible peripheral mapping, and adequate electrical performance. Similar PIC24F controllers with different flash capacity, pin count, package, or ball layout may require firmware and PCB changes, so they should not be treated as drop-in replacements without a complete pin and peripheral comparison.
Is PIC24FJ64GA310-I/BG the same as PIC24FJ64GA310?
They belong to the same PIC24FJ64GA310 device family, but they are not identical ordering codes. PIC24FJ64GA310 identifies the base device family, while PIC24FJ64GA310-I/BG adds the industrial-grade and 121-TFBGA packaging information. For purchasing, PCB layout, and qualification, use the complete -I/BG suffix so the selected temperature grade and package match the intended design.
When should I choose PIC24FJ64GA310-I/BG over another PIC24F controller?
Choose the PIC24FJ64GA310-I/BG when a design requires a 16-bit MCU with 32 MHz performance, 64 KB of Flash, 8 KB of SRAM, extensive I/O, and a very low 340 nA sleep current. It is especially suitable for compact industrial or battery-powered products needing LCD-oriented connectivity. Select a different PIC24F variant when flash capacity, SRAM, pin count, package size, or peripheral mix exceeds the requirements of this 121-ball device.
Is PIC24FJ64GA310-I/BG suitable for battery-powered instruments?
Yes, the PIC24FJ64GA310-I/BG is suitable for battery-powered instruments because its nanoWart XLP design supports Low Voltage Sleep at a typical 340 nA while retaining state and RAM. The 32 MHz processing speed and 64 KB of Flash also provide sufficient capability for sensor acquisition, local processing, and user-interface control. Actual battery life depends on the duty cycle, analog front end, display load, and power-management design.
What is the best Microchip equivalent for PIC24FJ64GA310-I/BG?
No alternate Microchip part is confirmed as a drop-in equivalent for the PIC24FJ64GA310-I/BG. The closest selection strategy is to remain within the PIC24FJ64GA310 family and confirm the exact package, temperature grade, and ordering suffix. A controller with fewer pins or a different ball-grid layout can save board area, but it may require a PCB redesign, altered pin mapping, and application-code changes.
How much memory does PIC24FJ64GA310-I/BG have?
The PIC24FJ64GA310-I/BG provides 64 KB of Flash program memory, specified as 22K x 24 words, together with 8 KB of SRAM, specified as 8K x 8. The 16-bit Flash structure supports efficient storage of application code, while the SRAM accommodates working variables, stacks, buffers, and peripheral data. Check the family data sheet for boot, configuration, and EEPROM emulation details before finalizing firmware partitioning.
Does PIC24FJ64GA310-I/BG support LCD displays?
Yes, the PIC24FJ64GA310 belongs to a general-purpose PIC24F family with LCD-oriented features. Its 85 general-purpose I/O pins provide ample connections for display segments, controls, and supporting interfaces, while the integrated analog and low-power capabilities suit compact panel designs. Use the family data sheet to confirm the display mapping, available segment outputs, and peripheral conflicts for the exact board configuration.
How much current does PIC24FJ64GA310-I/BG draw in sleep mode?
The Microchip product page states that the Low Voltage Sleep mode maintains the device state and RAM with a typical current of 340 nA. This is a sleep-mode figure rather than active-run current, so it should be used for battery-life estimates together with the operating duty cycle. Peripherals, external pull resistors, sensors, and display loads may dominate the board-level standby current.
Can PIC24FJ64GA310-I/BG be used in a 10 x 10 mm PCB design?
Yes, the PIC24FJ64GA310-I/BG is supplied in a 121-TFBGA package measuring 10 x 10 mm. The package provides a compact solution for low-power control, measurement, and interface designs, but its fine ball pitch demands multilayer routing, careful power-plane design, and controlled assembly processes. Follow the Microchip package drawing and layout guidance for solder-mask, paste, and via-in-pad recommendations.
Where can I buy PIC24FJ64GA310-I/BG online?
Use the Request a Quote form on this page to request current availability, volume pricing, and lead time for the PIC24FJ64GA310-I/BG. Quote requests should include the exact -I/BG suffix, the required 121-TFBGA package, target quantity, and any required compliance or traceability documentation. This avoids ordering a different package or temperature grade because the family includes multiple configurations.
What is the price of PIC24FJ64GA310-I/BG?
Current pricing for the PIC24FJ64GA310-I/BG is presented through the Request a Quote form on this page. Submit the exact MPN, required quantity, and delivery location to obtain a current quotation with volume-break handling. The -I/BG suffix is important because the base PIC24FJ64GA310 family is offered in several package and temperature-grade configurations.
What is the lead time for PIC24FJ64GA310-I/BG?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time can vary with order volume, package configuration, and manufacturing availability, so it should be confirmed for the exact PIC24FJ64GA310-I/BG ordering code. Include your required delivery date and whether multiple purchase orders are planned so the supplier can confirm the appropriate supply plan.
Is PIC24FJ64GA310-I/BG currently in stock?
Current stock for PIC24FJ64GA310-I/BG should be confirmed through the Request a Quote form on this page. Provide your target quantity and required ship date for an availability response based on the complete -I/BG ordering code. Because the device family includes several package and grade options, always identify the 121-TFBGA industrial configuration when submitting a request.

工程参考数据: PIC24FJ64GA310-I/BG ——对比、设计指导和合规信息。

选型指南

Choose the PIC24FJ64GA310-I/BG when the design needs a 16-bit MCU running at 32 MHz, 64 KB of Flash, 8 KB of SRAM, extensive I/O, and a low-current sleep mode. It is a strong fit for battery-powered instruments, connected sensing nodes, industrial condition-monitoring equipment, and LCD control panels where a 10 x 10 mm 121-ball package is acceptable. Do not choose it when a small leaded package, fewer I/O pins, or a lower-cost PCB process is required. No alternate device has been confirmed as a pin-to-pin drop-in substitute for the exact 121-TFBGA configuration. When evaluating another PIC24FJ64GA310 ordering code, compare its package, temperature grade, pin mapping, and voltage ratings explicitly. For a different controller family, also review peripheral availability, memory architecture, development-tool support, and certification requirements before committing to a design.

与替代料对比

参数 本产品
Brand Microchip Technology
Package 121-TFBGA (10 x 10 mm)
Architecture 16-bit Modified Harvard
Maximum Operating Frequency 32 MHz
Flash Memory 64 KB (22K x 24 words)
SRAM 8 KB (8K x 8)
General-Purpose I/O 85 pins
Operating Voltage Range 2 V to 3.6 V
Low Voltage Sleep Typical Current 340 nA
Low-Power Technology nanoWart XLP

关键差异点

  • Combines 32 MHz processing with deep low-power sleep capability (对比 PIC24FJ64GA310-I/PF)
  • Provides 85 general-purpose I/O in a compact 10 x 10 mm footprint (对比 PIC24FJ64GA310-I/PF)
  • Sufficient on-chip resources for moderate embedded control (对比 PIC24HJ64GP504-I/PT)

设计说明

Design the supply around the 2 V to 3.6 V operating range and include local bulk and high-frequency bypass capacitance at the power and ground balls. Place the smallest decoupling capacitors closest to their supply pins to minimize effective loop inductance. Because Low Voltage Sleep is specified at a typical 340 nA, external pull resistors, level shifters, sensors, transceivers, and indicator circuits can dominate standby consumption and should be switched or high-impedance where possible.

The 121-TFBGA footprint uses a fine ball pitch and requires multilayer routing with continuous reference planes where practical. Escape VDD, VSS, and high-speed nets directly from the ball array without long stubs, and follow the manufacturer's package drawings for solder-mask and paste apertures. Thermal performance also depends on how the exposed or underside thermal features are connected, so verify the exact ball map and recommended land pattern before releasing artwork.

Do not substitute the base family name for the complete -I/BG ordering code. PIC24FJ64GA310-I/BG specifies the industrial-grade 121-ball package, and related PIC24FJ64GA310 variants may use different pin counts or package dimensions. Also avoid treating a same-family controller as drop-in without checking its ball assignment, peripheral mapping, voltage tolerance, and firmware support. These mismatches can compile successfully yet produce failures on an existing PCB.

Low-power operation depends on more than entering the MCU sleep instruction. Disable unused peripherals, remove external leakage paths, and define which RAM contents must survive sleep. Validate wake-up timing and the behavior of the LCD, analog, and communication peripherals in the selected sleep mode. Measure current at the power rails under real operating conditions rather than estimating battery life from the 340 nA controller specification alone.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The industrial-grade ordering designation identifies the temperature grade but does not by itself establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Request the current manufacturer declarations for the exact ordering code.

相关搜索

PIC24FJ64GA310-I/BG datasheet PIC24FJ64GA310-I/BG pinout PIC24FJ64GA310-I/BG datasheet pdf PIC24FJ64GA310-I/BG specifications PIC24FJ64GA310-I/BG equivalent PIC24FJ64GA310-I/BG replacement PIC24FJ64GA310-I/BG cross reference PIC24FJ64GA310 121 TFBGA pinout PIC24FJ64GA310 32MHz low power PIC24FJ64GA310 nanoWart XLP PIC24FJ64GA310-I/BG footprint PIC24FJ64GA310-I/BG price PIC24FJ64GA310-I/BG stock Microchip PIC24FJ64GA310-I/BG PIC24FJ64GA310-I/BG vs PIC24FJ64GA310-I/PF

相关元器件 & 术语

Microchip Technology PIC24FJ64GA310-I/BG PIC24FJ64GA310 PIC24F PIC24F GA Series 16-bit microcontroller Flash microcontroller embedded microcontroller modified Harvard architecture nanoWart XLP Low Voltage Sleep 32 MHz 64 KB Flash memory 8 KB SRAM 85 general-purpose I/O 121-TFBGA ball grid array 10 x 10 mm package surface mount industrial temperature grade 2 V to 3.6 V 340 nA sleep current LCD control panel industrial condition monitoring battery-powered instrumentation
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情