Microchip Technology

MCP3426A6-E/SN - 16-Bit Dual-Channel ADC | Microchip

料号: MCP3426A6-E/SN ✓ 量产中
2.048 V Vdss 8-pin SOIC Package
最小起订量: 1 |

MCP3426A6-E/SN 概述

The Microchip Technology MCP3426A6-E/SN is a 16-bit, dual-channel, sigma-delta analog-to-digital converter with differential inputs, conversion rates up to 15 samples per second, and an 8-pin SOIC package. It operates from 2.7 V to 5.5 V and accepts a differential input range of ±2.048 V when using its on-board 2.048 V precision reference.

A sigma-delta ADC is a voltage-to-digital converter that uses continuous-time delta-sigma modulation and digital filtering to provide high resolution and low noise. It belongs to the ADC hierarchy within data-converter and mixed-signal semiconductors. The MCP3426 family is designed for precision measurement of low-frequency, differential analog signals where low noise, high resolution, and integrated references are more important than high-speed waveform capture.

The MCP3426A6-E/SN provides up to 16-bit resolution across two channels. Its differential architecture rejects common-mode noise when the source is arranged around a defined common-mode voltage, while the internal 2.048 V reference defines a nominal full-scale differential range of ±2.048 V. A 2.7 V to 5.5 V operating range supports both 3.3 V and 5 V systems. The device also supports an extended operating temperature range of -55 °C to +125 °C.

The A6 configuration is identified by a nominal 15 samples-per-second conversion rate in distributor technical data. This rate is appropriate for slow-changing process variables, temperature, pressure, load-cell, and instrumentation signals rather than audio-rate or high-speed industrial acquisition. An integrated ADC should be paired with an input filter, clean reference routing, and careful grounding to preserve the benefit of its high resolution.

Typical uses include differential sensor measurement, industrial pressure and temperature acquisition, bridge-sensor instrumentation, low-frequency process monitoring, and portable measurement systems. Because the converter has two input channels, it can measure two related voltages or a differential sensor while retaining the same reference and conversion architecture.

Layout is especially important because high-resolution conversion is sensitive to small analog voltages. Place input and reference components close to their associated pins, use a quiet ground return, isolate digital communication from sensitive input traces, and avoid routing analog inputs beneath switching nodes. The manufacturer datasheet remains the controlling document for bypass capacitance, input-voltage limits, conversion timing, and pin assignments.

This product page combines the manufacturer device description, distributor technical attributes, pricing records, package details, and engineering guidance into a focused selection resource. It also documents where equivalent and cross-reference information is incomplete, helping engineers distinguish true drop-in interchangeability from devices that merely perform a similar conversion function.

直接替换替代料: MCP3426A6-E/SN ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: MCP3426A6-E/SN (相同外形与封装尺寸) ——差异在于 Package, Number of Input Channels, Differential Input Range, Resolution, ADC Type.

Microchip Technology
Package: 8-pin SOIC, 0.154 in (3.90 mm) wide
Number of Input Channels: 2
Differential Input Range: ±2.048 V differential
Microchip Technology
Package: 8-pin SOIC, 3.90 mm body width
Resolution: Up to 16 bits
Microchip Technology
Package: 8-pin SOIC, 3.90 mm width
Number of Input Channels: 2 analog input channels
Resolution: Up to 16 bits

该产品暂无直接替换替代料。

请求替代料

MCP3426A6-E/SN 最大额定值与电气特性

分辨率 16 bit
Number of Input Channels 2 channels
Input Architecture Differential input
ADC Architecture 1-channel delta-sigma per conversion path, dual-channel device
Conversion Rate 15 samples/s
Internal Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Minimum Supply Voltage 2.7 V
Maximum Supply Voltage 5.5 V
Nominal Supply Voltage 3.3 V or 5 V
Minimum Operating Temperature -55 °C
Maximum Operating Temperature +125 °C
封装 8-pin SOIC
安装类型 Surface mount
RoHS Compliance RoHS3 compliant
REACH Status Unaffected
Moisture Sensitivity Level MSL Level 1

MCP3426A6-E/SN 8-pin soic 引脚配置指南

MCP3426A6-E/SN(8-pin soic 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

MCP3426A6-E/SN 的 8-pin soic 封装引脚图

暂无详细引脚数据: MCP3426A6-E/SN.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MCP3426A6-E/SN 适用于 6 应用s: Industrial Pressure and Temperature Sensing, Load-Cell and Bridge Instrumentation, Medical and Physiological Monitoring, Portable Environmental Monitoring, Precision Test and Measurement, Power-Supply and Battery Monitoring.

🏭

Industrial Pressure and Temperature Sensing

The MCP3426A6-E/SN fits slow-changing pressure, temperature, and process-variable channels that require 16-bit resolution and differential input handling. Its two differential channels can acquire a conditioned sensor and a reference or related measurement, while the internal 2.048 V reference supports a ±2.048 V nominal input range. At 15 sample/s, the converter is appropriate for thermal and pressure systems whose signals change over seconds or slower. The principal design task is ensuring sensor excitation, common-mode voltage, input noise, and grounding remain compatible with the converter’s electrical limits.

⚖️

Load-Cell and Bridge Instrumentation

The MCP3426A6-E/SN is suitable for differential bridge measurements where small millivolt-level changes must be resolved against a larger common-mode voltage. Two differential inputs support bridge and reference acquisition, and the 16-bit conversion resolution preserves fine measurement detail. Its 15 sample/s rate suits static weighing, force, and displacement systems rather than high-speed vibration analysis. Use a low-noise instrumentation amplifier such as MCP6071-E/SN, carefully ground the bridge and converter, and confirm the configured gain and common-mode limits from the manufacturer data sheet.

💊

Medical and Physiological Monitoring

The MCP3426A6-E/SN can serve as the ADC stage in low-frequency physiological monitoring equipment when the front end keeps signals within the converter’s input and common-mode limits. Its dual differential architecture is useful for sensing paired electrodes or a differential sensor plus reference, and the 16-bit resolution supports detailed digital representation. The 15 sample/s rate is appropriate for slowly varying parameters such as temperature, respiration, or biochemical-sensor outputs. A medical design must independently validate accuracy, patient protection, isolation, and regulatory requirements beyond the ADC’s electrical ratings.

🧩

Portable Environmental Monitoring

The MCP3426A6-E/SN supports compact environmental sensors that report temperature, humidity, gas, or light levels through low-bandwidth analog channels. Its 2.7 V to 5.5 V operating range accommodates battery-powered 3.3 V equipment as well as 5 V systems, and the integrated 2.048 V reference reduces the number of external precision components. Two differential inputs provide flexibility for a sensor plus reference arrangement. At 15 sample/s, the device prioritizes resolution and noise performance over rapid response, making it most appropriate for slow environmental trends rather than transient events.

🔧

Precision Test and Measurement

The MCP3426A6-E/SN is useful in laboratory and production equipment that measures slow-changing voltages with high resolution. Its 15 sample/s conversion rate is sufficient for calibration, monitoring, and status measurements, while the internal 2.048 V reference provides a convenient conversion scale for a ±2.048 V differential range. Two channels allow related quantities to be acquired consistently. Designers should still account for analog-front-end offset, noise, source impedance, and digital filtering, and should use the pinout and application circuit in the Microchip family data sheet for implementation details.

⚡

Power-Supply and Battery Monitoring

The MCP3426A6-E/SN can monitor two differential voltages in power systems, including a scaled supply rail or battery cell versus a reference. Its 16-bit resolution can reveal small changes that are difficult to observe with lower-resolution converters, and the differential inputs help reject shared supply noise. The 15 sample/s rate is suitable for supervisory rather than high-bandwidth protection tasks. Confirm that every monitored voltage remains within the absolute input limits, use an appropriate divider or front-end amplifier, and avoid allowing measurement circuitry to disturb the power rail being monitored.

What is the Microchip MCP3426A6-E/SN?
The MCP3426A6-E/SN is a 16-bit, dual-channel, delta-sigma analog-to-digital converter with differential inputs and an 8-pin SOIC package. According to the Microchip MCP3426/7/8 data sheet, document 22226a, the device includes an on-board 2.048 V precision reference, supports a differential input range of ±2.048 V, and operates from 2.7 V to 5.5 V. The A6 variant converts at a nominal rate of 15 samples per second.
What are the key specifications of MCP3426A6-E/SN that engineers should know?
The principal MCP3426A6-E/SN specifications are 16-bit resolution, two differential input channels, a 15 sample/s conversion rate, and a 2.7 V to 5.5 V supply range. According to the Microchip product page and MCP3426/7/8 data sheet, document 22226a, the converter also provides a 2.048 V on-board reference supporting a ±2.048 V differential input range. It is packaged for surface-mount assembly in an 8-pin SOIC.
Where can I download the MCP3426A6-E/SN datasheet PDF?
The manufacturer datasheet PDF is available directly from Microchip at the official MCP3426/7/8 data-sheet link on this page. The document identifies itself as 22226a and covers the MCP3426, MCP3427, and MCP3428 family. Use that manufacturer document for the electrical characteristics, conversion timing, recommended application circuit, and authoritative package pin assignments.
Where can I find the MCP3426A6-E/SN pinout?
The MCP3426A6-E/SN pinout is documented in the pin-description section of the Microchip MCP3426/7/8 data sheet, document 22226a. The component uses an 8-pin SOIC footprint. Before assigning tracks, use the package drawing and pin table from the datasheet to confirm analog inputs, supply pins, ground connections, communication pins, and any exposed or reserved functions.
What is the supply voltage range of MCP3426A6-E/SN?
The MCP3426A6-E/SN operates from 2.7 V to 5.5 V. According to the Microchip product page and family data sheet, document 22226a, this range supports 3.3 V and 5 V designs while allowing the internal 2.048 V reference and converter circuitry to operate from a single supply. Keep the analog and digital return paths connected as directed in the manufacturer application guidance.
How fast does the MCP3426A6-E/SN convert analog signals?
The MCP3426A6-E/SN has a nominal conversion rate of 15 samples/s. Distributor technical data and the Microchip family documentation identify the A6 configuration with this rate. It is appropriate for temperature, pressure, load-cell, and other slowly changing differential signals, but it is not intended for high-speed waveform capture or wideband audio sampling.
What input range does MCP3426A6-E/SN support?
The MCP3426A6-E/SN supports a nominal differential input range of ±2.048 V when its on-board 2.048 V precision reference is used. According to the Microchip product description, the converter has two differential inputs and uses that reference to establish the full-scale range. Confirm the selected gain, channel configuration, and absolute input limits in the family data sheet before connecting external sources.
Is MCP3426A6-E/SN suitable for industrial sensor measurement?
The MCP3426A6-E/SN is suitable for slow-changing industrial sensor signals when 16-bit resolution and differential input handling are priorities. Its 15 sample/s conversion rate suits temperature, pressure, strain, and process-monitoring channels, while the ±2.048 V differential range can support suitable bridge or conditioned sensor outputs. The -55 °C to +125 °C rating also covers a broad industrial temperature range.
Can MCP3426A6-E/SN measure bridge sensors and low-level voltages?
The MCP3426A6-E/SN can measure low-level differential signals when they remain within the configured input limits, making it appropriate for bridge-sensor and instrumentation designs. Differential measurement helps reject common-mode noise that would otherwise affect both inputs equally. Its 16-bit resolution and 2.048 V internal reference support precision measurement, but input bias current, noise, gain, and settling behavior must be checked against the sensor.
How does MCP3426A6-E/SN compare with MCP3426A6-E/MS?
The MCP3426A6-E/MS provides the same nominal MCP3426A6 conversion configuration but uses an 8-DFN package rather than the target's 8-pin SOIC package. The MCP3426A6-E/SN therefore offers the appropriate choice when the PCB footprint is SOIC-8, while MCP3426A6-E/MS is not a physical drop-in replacement. Verify land patterns and exposed-pad requirements before changing either package.
What can replace MCP3426A6-E/SN without redesigning the PCB?
No alternative is confirmed as a pin-to-pin drop-in replacement for MCP3426A6-E/SN in the available cross-reference records. The electrically equivalent MCP3426A6-E/MS uses an 8-DFN package and therefore requires a different footprint. MCP3426A6 ordering-code variants may change packaging rather than add engineering capability. For a board-level substitution, require an exact SOIC-8 footprint match, equivalent pinout, and compatible electrical ratings.
When should I choose MCP3426A6-E/SN over another delta-sigma ADC?
Choose MCP3426A6-E/SN when the design needs two differential channels, 16-bit resolution, a 15 sample/s conversion rate, and an SOIC-8 footprint. Its integrated 2.048 V reference simplifies instrumentation in which an external reference would add parts. Select a faster converter for changing waveforms or dynamic measurements, and select another package when SOIC-8 is unavailable on the PCB.
Is MCP3426A6-E/SN suitable for medical monitoring equipment?
The MCP3426A6-E/SN can serve as a front-end converter for low-frequency medical monitoring signals when its voltage, noise, and input specifications satisfy the system requirements. Its two differential inputs and 16-bit resolution are useful for sensing small differential physiological signals, while the integrated reference simplifies control-voltage design. Medical systems still require separate validation of safety, isolation, accuracy, and applicable regulatory requirements.
What is the power consumption of MCP3426A6-E/SN?
The MCP3426A6-E/SN supply-current and power-consumption figures depend on operating mode, supply voltage, conversion activity, and the selected configuration. The manufacturer MCP3426/7/8 data sheet, document 22226a, is the authoritative source for these operating-current values. Compare the data-sheet operating modes against the real workload instead of assuming that a slow conversion rate always produces the lowest average consumption.
How can I request a price and lead time for MCP3426A6-E/SN?
Use the Request a Quote form on this page to request current pricing, stock confirmation, minimum order quantity, and lead time for MCP3426A6-E/SN. Quote requests should identify the exact suffix MCP3426A6-E/SN and the required package quantity. Current availability can change, so obtain written confirmation before releasing a production purchase order or freezing a bill of materials.
Where can I buy MCP3426A6-E/SN online?
The practical purchasing route on this page is the Request a Quote form, which supports current price, stock, lead-time, and quantity confirmation for MCP3426A6-E/SN. Confirm that the quote identifies the exact 8-pin SOIC ordering code rather than MCP3426A6-E/MS or another package variant. Buyers should also verify the manufacturer’s lifecycle status and delivery information at the time of purchase.

工程参考数据: MCP3426A6-E/SN ——对比、设计指导和合规信息。

选型指南

Choose MCP3426A6-E/SN for precision, low-frequency measurement systems that require two differential inputs, 16-bit resolution, and an 8-pin SOIC footprint. Its integrated 2.048 V reference is especially useful when an external precision reference would complicate the design, and its 15 sample/s rate suits temperature, pressure, bridge, process, and status monitoring. Do not select it for high-speed waveform capture. MCP3426A6-E/MS offers a closely related electrical configuration, but its 8-DFN package is not a physical drop-in option for an SOIC-8 board. Other MCP3426 gain or conversion-ordering variants can alter gain, sensitivity, or acquisition timing, so verify the exact electrical configuration rather than relying on the package alone. For a drop-in substitution, require an exact SOIC-8 footprint, identical pin assignment, compatible input limits, and equivalent conversion performance.

与替代料对比

参数 本产品
Package 8-pin SOIC
Brand Microchip Technology
Resolution 16 bit
Input Channels 2 channels
Input Type Differential
Conversion Architecture Sigma-delta
Conversion Rate 15 samples/s
Supply Voltage Range 2.7 V to 5.5 V
Internal Reference 2.048 V
Differential Input Range ±2.048 V
Operating Temperature Range -55 °C to +125 °C

关键差异点

  • Two-channel differential measurement in a standard SOIC-8 footprint (对比 MCP3426A6-E/MS)
  • Integrated precision reference simplifies analog design (对比 External-reference ADC implementations)
  • High resolution optimized for slow sensor signals (对比 Faster delta-sigma ADCs)

设计说明

Route the two analog inputs away from digital communication and switching traces, using a quiet analog ground region and the shortest practical input paths. Place input filtering, amplifier, and reference components close to the relevant converter pins. Because a 16-bit converter can resolve very small voltage changes, even a few millivolts of coupling into a sensitive input can affect the result. Use a solid ground plane while avoiding split-plane returns that force analog current to cross noisy digital paths.

Design the analog front end for the source impedance and the selected gain. Differential inputs should share a controlled common-mode voltage, and their absolute voltages must remain within the device limits during startup, fault conditions, and full-scale transitions. Use an amplifier such as MCP6071-E/SN when source impedance is high or common-mode rejection requirements exceed the sensor interface’s capability. Check settling and filter time against the 15 sample/s conversion schedule.

Decouple the converter supply close to its supply and ground pins using the capacitance values specified in the Microchip MCP3426/7/8 data sheet, document 22226a. Keep the 2.048 V internal-reference path quiet and avoid routing it alongside switching-regulator outputs. If the supply can overshoot or fall outside 2.7 V to 5.5 V, add appropriate protection before the ADC. Verify the actual operating mode and conversion activity against the family data sheet before estimating average power consumption.

Do not treat MCP3426A6-E/MS as a drop-in substitute for MCP3426A6-E/SN: the former uses an 8-DFN package and the latter uses an 8-pin SOIC. Likewise, confirm the exact ordering code before treating any same-family suffix as interchangeable. The A6 designation identifies the 15 sample/s configuration, so changing gain or conversion option can alter sensitivity and acquisition time even when the land pattern appears identical.

合规信息

RoHS
Compliant
REACH
Compliant
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Cross-reference information identifies the MCP3426 family as RoHS3 compliant, REACH unaffected, and MSL Level 1. No separate automotive qualification, lead-free declaration, halogen-free declaration, or conflict-minerals statement was established for this exact ordering code.

相关搜索

MCP3426A6-E/SN datasheet MCP3426A6-E/SN pinout MCP3426A6 datasheet pdf MCP3426A6 equivalent MCP3426A6 replacement MCP3426A6-E/SN price MCP3426A6-E/SN stock Microchip MCP3426A6-E/SN MCP3426A6-E/SN SOIC-8 MCP3426A6 vs MCP3426A6-E/MS MCP3426 16 bit ADC MCP3426A6 application circuit

相关元器件 & 术语

Microchip Technology MCP3426A6-E/SN MCP3426A6-E/MS MCP3426 MCP3427 MCP3428 ADC analog-to-digital converter delta-sigma ADC sigma-delta modulator differential input 16-bit resolution 2.048 V precision reference 15 samples/s 2.7 V to 5.5 V supply 8-pin SOIC SOIC family surface-mount package SMD precision measurement bridge sensor industrial sensor interface RoHS3 REACH MSL Level 1
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情