PM573 - 512kB Ethernet AC500 Processor | ABB
料号： PM573 ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
PM573 概述
A programmable logic controller, or PLC, is a ruggedized industrial controller used to automate machinery, production lines, utilities, and building systems. Within the AC500 architecture, the PM573 processor handles application logic while communication modules and I/O modules connect the controller to sensors, actuators, operator interfaces, and supervisory networks. Its 512 kB memory capacity provides storage for program code and data, while Ethernet supports networked automation communication.
The PM573 provides two combined RS232/RS485 interfaces for serial equipment or fieldbus connections and includes FBP functionality. According to ABB product information, it also supports display operation. These communication resources make the module suitable for centralized machine control where local serial devices must coexist with Ethernet-based plant communication. Exact electrical ratings, environmental limits, firmware details, and power-consumption figures are not present in the supplied search results and require confirmation from ABB documentation before design release.
Typical uses include AC500-based production machinery, packaging equipment, material-handling systems, water and wastewater automation, utilities, and remote supervisory control. Ethernet can link the controller to engineering software, industrial networks, or an HMI. The two serial interfaces are useful for local drives, instruments, readers, or legacy equipment, although protocol and baud-rate compatibility must be verified for each attached device. FBP support provides a standardized ABB mechanism for exchanging process data among automation components.
The verified results distinguish PM573 from PM573-ETH and PM573-ETH-XC. The supplied snippets explicitly associate PM573-ETH with the AC500 processor-module configuration, but they do not provide enough verified electrical or mechanical detail to establish PM573 as an exact orderable ordering code or to prove drop-in interchangeability. Engineers should therefore confirm the exact ABB ordering designation, base unit, firmware, accessory, and current product status in the manufacturer system before purchasing or substituting it. This page synthesizes the verified ABB interface information and explicitly identifies missing technical data rather than estimating it.
PM573 规格参数（制造商发布）
| Product Type | Processor module |
| Product Family | AC500 |
| Programmable Logic Controller Platform | AC500 |
| User Program Memory | 512 kB |
| Ethernet Interface | 1 interface |
| Serial Interface Count | 2 interfaces |
| Serial Interface Type | RS232/RS485 |
| FBP Support | Supported |
| Display Support | Supported |
| Field Device Communication | Ethernet and serial communication |
| Applicable Datasheet Revision | I |
PM573 接口与连接器
PM573 提供制造商发布的以下接口和连接器：以太网。扩展排针引脚定义、连接器引脚编号和电气限值在制造商文档中定义。
| 以太网 | 1 interface |
请参阅 制造商文档 以查看完整的扩展排针引脚和连接器引脚编号。
典型应用
PM573 适用于 6 应用s: Production-Line PLC Control, Packaging Machinery Automation, Water and Wastewater Automation, Material-Handling Systems, Building-Services Control, Remote Supervisory Control.
Production-Line PLC Control
The ABB PM573 fits AC500 production-line control because the verified module provides 512 kB of processor memory for automation logic plus Ethernet, two RS232/RS485 interfaces, FBP, and display support. It can serve as the central controller while expansion I/O modules handle sensors and actuators. The processor's network connectivity supports engineering access and supervisory communication, while the serial interfaces can serve compatible drives, instruments, readers, or local displays. Because the retrieved data omits supply voltage, environmental limits, instruction performance, and module capacity, engineers must confirm those values before architecture release.
Packaging Machinery Automation
PM573 is suitable for packaging machinery when a machine requires coordinated logic, operator visibility, and both network and serial equipment integration. Its verified 512 kB memory and AC500 processor-module role provide a platform for sequencing conveyors, guarding, fillers, labelers, and reject mechanisms. Ethernet can support engineering or supervisory connections, while the two RS232/RS485 interfaces can accommodate compatible scales, printers, barcode readers, or drives. The trade-off is that the supplied information does not establish real-time cycle timing, I/O capacity, or protocol support, so those controls must be validated for the specific packaging line.
Water and Wastewater Automation
The PM573 can support centralized water or wastewater automation when an ABB AC500 architecture is already selected. Ethernet provides a path toward plant supervisory systems, while dual RS232/RS485 connectivity may connect compatible field instruments or local control equipment. FBP support can exchange process data with participating ABB automation components, and display support can assist local operation. Use is conditional because the supplied evidence does not state environmental ratings, surge tolerance, analog input specifications, or availability. Those properties are essential in utility environments and must be confirmed before deployment.
Material-Handling Systems
PM573 is appropriate for material-handling control where conveyors, position sensors, safety devices, drives, and operator stations must operate as a coordinated system. The AC500 processor role and 512 kB memory support application logic, while Ethernet, two RS232/RS485 interfaces, and display support broaden integration options. A conveyor project may use Ethernet for plant-level coordination and serial communication for compatible local devices. Before selecting the module, engineers should verify scan-time requirements, expansion-I/O limits, bus capability, electrical supply, and operating-temperature requirements because none of those values appears in the supplied snippets.
Building-Services Control
PM573 can form part of an AC500 controller used to automate building services such as pumps, fans, lighting, HVAC sequencing, and alarms. Ethernet allows integration with supervisory building-management systems, and display support can assist local status presentation. The two RS232/RS485 interfaces may connect compatible meters, controllers, or service equipment when their protocols are confirmed. FBP adds an ABB-specific mechanism for process-data exchange within the automation architecture. Compliance and environmental suitability remain unresolved because the supplied data does not identify RoHS, REACH, temperature range, protection rating, or hazardous-area approval.
Remote Supervisory Control
PM573 supports remote supervisory-control architectures through its verified Ethernet interface and AC500 processor-module function. Local logic can execute machine or process control while authorized networks provide engineering access, status reporting, and integration with supervisory software. Its two RS232/RS485 channels can support local equipment where legacy serial connectivity is required, while display support can provide an operator interface. A network architecture still needs cybersecurity, protocol, addressing, and redundancy planning. None of those network security capabilities is stated in the supplied sources, so the module should not be treated as inherently secure without separate system controls.
工程参考数据： PM573 ——对比、设计指导和合规信息。
设计说明
Do not assume that the family label PM573 can be ordered interchangeably with PM573-ETH or PM573-ETH-XC. The verified results use both PM573 and PM573-ETH, while only the suffixed products are explicitly described as Ethernet processor modules. Before placing an order, obtain the complete ABB article number, product revision, base-unit requirement, firmware level, and accessory list. This avoids mixing a family reference with a specific orderable module configuration.
Plan the AC500 rack around the selected processor, power supply, communication modules, and I/O expansion. Preserve the required airflow and prevent cables or service access from obstructing module replacement. Ethernet and RS232/RS485 wiring must remain separated from sensitive signal routes where possible, and each interface should use the connector and termination arrangement specified by ABB. Exact mounting, spacing, and grounding details are unavailable in the supplied data.
Validate the power supply against the selected AC500 configuration rather than the processor alone. The retrieved snippets contain no nominal supply voltage, current consumption, inrush behavior, or tolerance, so those values must be taken from the applicable ABB system data and matched to all installed modules. Check power budget, isolation, grounding, and startup behavior before energizing the controller. Do not derive the supply rating from another PM57x variant without manufacturer confirmation.