R5F101MFAFB#30 - 32MHz 16-bit MCU | Renesas Electronics
料号: R5F101MFAFB#30 ✓ 量产中R5F101MFAFB#30 概述
An RL78/G13 microcontroller is a 16-bit embedded-control device in the broader hierarchy of microcontroller, embedded processor, and semiconductor components. The RL78 architecture combines a compact instruction set with low-power operating modes for equipment that performs real-time sensing, control, data acquisition, actuator management, or communications. The R5F101MFAFB#30 integrates an on-chip oscillator, data Flash, and an A/D converter according to the Renesas Electronics RL78/G13 product-page description.
Key device characteristics include a maximum clock frequency of 32 MHz, 96 KB of Flash memory, and CPU operation at 66 µA/MHz. The RL78/G13 family reaches 43.2 DMIPS at 32 MHz, while STOP-mode standby current is 230 nA. These figures support responsive control-loop execution and low standby consumption in embedded products. The -40 °C to +85 °C rating supports industrial temperature environments, including consumer appliances, industrial controls, and instrumentation.
The part belongs to the RL78/G13 family, whose hardware-safety function detects illegal hardware operation. Family-level features include an internal oscillator, data Flash, and an analog-to-digital converter, reducing external component requirements in designs that need autonomous sensing and control. The 80-lead LFQFP provides a conventional leaded surface-mount footprint and ample external peripheral connections for sensors, communications interfaces, and digital control signals.
Typical uses include household appliance controllers, industrial equipment, sensor modules, motor-control systems, power-conversion controllers, and compact embedded products. For a 5 V or 3.3 V system, designers must verify the device-specific operating-voltage limits, peripheral ratings, and external-component recommendations in the manufacturer documentation before finalizing the power architecture.
PCB design should preserve the exposed programming and debug interface, assign unused pins according to the device pin-description table, and decouple each supply terminal close to its package pin. Confirm the clock configuration and ADC reference arrangement against the manufacturer datasheet because peripheral tolerances and recommended network values are device-specific.
This product page consolidates the exact orderable MPN, family-level performance data, package information, purchasing guidance, application guidance, and design considerations into a single engineering reference. It also distinguishes verified device facts from parameters that require confirmation during schematic and PCB review.
直接替换替代料: R5F101MFAFB#30 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
R5F101MFAFB#10
✅ 直接替换📋 参考替代料(不在目录中)
R5F101LGAFB#30
✅ 直接替换📋 参考替代料(不在目录中)
R5F101MFAFB#30 最大额定值与电气特性
| Product Type | 16-bit RL78/G13 Microcontroller Unit |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 96 KB |
| Memory Organization | 96K x 8 bits |
| CPU Performance | 43.2 DMIPS at 32 MHz |
| CPU Operating Current | 66 µA/MHz |
| STOP Mode Standby Current | 230 nA |
| On-Chip Oscillator | Integrated |
| On-Chip Data Flash | Integrated |
| A/D Converter | Integrated |
| Hardware Illegal-Operation Detection | Supported |
| 封装 | 80-lead LFQFP, 12 mm x 12 mm |
| 安装类型 | Surface Mount |
| 工作温度范围 | -40 °C to +85 °C |
R5F101MFAFB#30 80-lead lfqfp, 12 mm x 12 mm 引脚配置指南
R5F101MFAFB#30(80-lead lfqfp, 12 mm x 12 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: R5F101MFAFB#30.
请参阅 数据手册 以查看完整引脚配置。
典型应用
R5F101MFAFB#30 适用于 6 应用s: Household Appliance Control, Industrial Sensor Conditioning, Motor and Actuator Control, Battery-Powered IoT Node, Data Acquisition Controller, Instrumentation and Control Panels.
Household Appliance Control
The R5F101MFAFB#30 fits household appliance control because its 16-bit RL78/G13 core executes at up to 32 MHz while providing 96 KB of Flash for control logic, operating modes, and interface handling. The integrated A/D converter can acquire sensor information without requiring a separate converter, while the 80-lead LFQFP exposes sufficient pins for loads, user inputs, and communication signals. Its -40 °C to +85 °C rating also supports temperature-conditioned indoor equipment. Designers should assign motor, heater, and mains-adjacent interfaces carefully, isolate hazardous circuitry, and verify every external component rating against the final appliance safety architecture.
Industrial Sensor Conditioning
The R5F101MFAFB#30 is well suited to industrial sensor-conditioning equipment that requires fast local control and analog measurement. Its 43.2 DMIPS performance at 32 MHz provides useful processing margin for filtering, calibration, and control loops, while the integrated 16-bit A/D converter reduces the need for external conversion circuitry. The 80-lead LFQFP package provides a practical surface-mount assembly option for control boards with multiple discrete connections. For factory equipment, the -40 °C to +85 °C operating range covers many ambient installations. Confirm the analog input range, reference voltage, sampling behavior, channel multiplexing, and sensor excitation requirements directly in the device documentation.
Motor and Actuator Control
The R5F101MFAFB#30 can serve as the supervisory controller in a motor or actuator system because its 32 MHz RL78/G13 core supports timely digital control while its 80-lead package offers multiple general-purpose I/O connections. Programmable timers and communication resources can organize duty-cycle management, status monitoring, and commands to external power stages. The integrated A/D converter may monitor current, position, or temperature feedback when its electrical limits match the sensing circuit. Use appropriate drivers for motors and inductive loads, add protection for switching transients, and separate noisy power paths from sensitive analog traces. Pin multiplexing, timer outputs, and standby behavior must be confirmed for the selected firmware configuration.
Battery-Powered IoT Node
The R5F101MFAFB#30 is appropriate for a compact IoT node that performs local sensing and control between wireless transmission intervals. RL78/G13 family operation of 66 µA/MHz and a STOP-mode standby current of 230 nA provide a useful basis for low-duty-cycle designs, although the complete system budget must also include sensors, radio, regulators, and leakage paths. The integrated A/D converter supports compact analog sensor interfaces, and 96 KB of Flash can hold application firmware, configuration, and protocol logic. Select the device variant that satisfies the exact voltage range, and include wake-up source, retention, and brownout behavior in the power-fail and firmware-recovery design.
Data Acquisition Controller
The R5F101MFAFB#30 can coordinate a compact data-acquisition system requiring local processing of multiple sensor channels. Its 32 MHz execution rate supports acquisition sequencing, scaling, filtering, and event handling, while the integrated A/D converter provides the core measurement function. With 96 KB of Flash, the controller can retain calibration coefficients, configuration data, and application code within one package. The 80-lead LQFP makes the device practical for a leaded surface-mount board and provides connections for digital channels, status indicators, and host communication. Before layout release, determine which channels require simultaneous sampling, verify ADC acquisition time, and provide adequate reference and analog-input conditioning.
Instrumentation and Control Panels
The R5F101MFAFB#30 suits instrumentation and control-panel electronics that combine measurement, local logic, and user-interface supervision. Its 16-bit architecture and 32 MHz clock support responsive menu, state-machine, and signal-processing tasks, while 96 KB of Flash accommodates firmware for calibration and multiple operating modes. The integrated A/D converter supports front-panel potentiometers, temperature sensors, and analog feedback inputs, and the 80-lead package offers enough external connections for displays, keys, communication ports, and indicators. The -40 °C to +85 °C range is suitable for many industrial and commercial environments. Validate display timing, communications voltage levels, watchdog behavior, and ESD protection before production release.
工程参考数据: R5F101MFAFB#30 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Manufacturer | Renesas Electronics |
| Package | 80-lead LFQFP, 12 mm x 12 mm |
| CPU Architecture | 16-bit RL78/G13 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 96 KB |
| CPU Performance | 43.2 DMIPS at 32 MHz |
| CPU Operating Current | 66 µA/MHz |
| STOP Mode Standby Current | 230 nA |
| Operating Temperature Range | -40 °C to +85 °C |
设计说明
Assign all 80 terminals directly from the manufacturer pin-description table before schematic release. The public product listing establishes the 80-lead LFQFP footprint but does not provide the complete terminal map. In particular, verify programming signals, reset behavior, analog inputs, supply terminals, and the treatment of unused pins rather than copying the layout of a different RL78/G13 package.
Confirm the R5F101MFAFB#30 operating-voltage range, internal regulator behavior, external supply tolerances, and brownout limits in the manufacturer documentation. Place the required bypass capacitors at their corresponding package pins using the shortest practical return paths. Keep switching-regulator and high-current paths away from the MCU supply and sensitive analog inputs to reduce supply-noise coupling into the A/D conversion system.
Route oscillator, reset, and programming-trace connections away from noisy motor, relay, and power-converter nodes. Keep the A/D input traces short, use a quiet reference arrangement, and place analog filtering components near the source when practical. The integrated converter does not remove the need for proper analog grounding, source impedance matching, and sampling-time planning.
Do not select a substitute from the RL78/G13 family name alone. A usable drop-in replacement must match the 80-lead pin assignment, 96 KB Flash configuration, clock characteristics, supply limits, peripheral multiplexing, temperature grade, and software startup sequence. Because several family members use different package and memory codes, verify the complete ordering information before committing a substitute to a PCB or firmware release.
合规信息
The device-specific environmental and material compliance declarations must be confirmed on the Renesas Electronics product page or in its declaration documents.