R5F10AMEKFB#V5 - 16-Bit Low-Power MCU | Renesas Electronics
料号: R5F10AMEKFB#V5 ✓ 量产中R5F10AMEKFB#V5 概述
An RL78 microcontroller is a compact 16-bit embedded controller within the Renesas MCU family. It combines a CPU core, flash program memory, RAM, timers, serial interfaces, analog and digital I/O, and low-power control functions in one integrated circuit. RL78/F13 devices extend the 78K0R and R8C product generations with low-power operation and communication-oriented peripherals for embedded systems.
The R5F10AMEKFB#V5 is suited to designs that need deterministic embedded control without a high-power application processor. Its CAN and LIN modules support network-connected equipment, while RAM ECC improves reliability in systems where memory faults must be detected. The PLL lock function supports stable clock-dependent behavior, and port-output state monitoring helps firmware confirm that output states match expected operating conditions.
The RL78/F13 family is offered in configurations spanning 20 to 80 pins and 16 KB to 128 KB of flash memory. This broad family range reflects its use across compact sensors, industrial controllers, automotive subsystems, and communication equipment. The low-consumption-current architecture is especially valuable in battery-powered or intermittently powered installations where average energy use determines maintenance intervals and operating life.
Typical uses include CAN-connected industrial equipment, LIN-controlled automotive submodules, compact motor and actuator controllers, low-power sensor interfaces, and household or building automation. For network products, the integrated CAN or LIN interface can reduce component count and board area compared with an MCU that requires an external communications transceiver. The protocol transceiver itself still requires suitable external circuitry.
PCB implementation should preserve the exposed-pad and thermal requirements of the LFQFP package, place decoupling capacitors close to supply pins, and route sensitive analog or communication signals away from high-current switching nodes. Firmware should also use the family’s low-power modes, watchdog functions, RAM ECC, and port diagnostics as part of a robust control strategy.
This product page combines manufacturer family details, packaging information, drop-in family alternatives, and implementation guidance. The comparisons emphasize device identity, communication capabilities, package compatibility, and the engineering checks needed when adapting an RL78/F13 design without changing its PCB footprint.
直接替换替代料: R5F10AMEKFB#V5 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
R5F10AMEKFB#X5
✅ 直接替换📋 参考替代料(不在目录中)
R5F10AMEKFB#H5
✅ 直接替换📋 参考替代料(不在目录中)
R5F10AMEKFB
✅ 直接替换📋 参考替代料(不在目录中)
R5F10AMEKFB#V5 最大额定值与电气特性
| Product Type | 16-bit microcontroller |
| Product Series | RL78/F13 |
| Maximum Core Frequency | 24 MHz |
| Architecture | 16-bit RL78 |
| CAN Interface | Built-in CAN module |
| LIN Interface | Built-in LIN module |
| Memory Error Correction | RAM ECC function |
| Clock Control | PLL lock function |
| Port Diagnostics | Port output state monitoring |
| Functional Safety Feature | Functional safety feature |
| 封装 | LFQFP surface-mount package |
| Family Flash Memory Range | 16 KB to 128 KB |
| Family Pin Count Range | 20 to 80 pins |
| Low Current Consumption | Low-consumption-current architecture |
| Product Lineage | Successor to 78K0R and R8C |
R5F10AMEKFB#V5 lfqfp surface-mount package 引脚配置指南
R5F10AMEKFB#V5(lfqfp surface-mount package 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: R5F10AMEKFB#V5.
请参阅 数据手册 以查看完整引脚配置。
典型应用
R5F10AMEKFB#V5 适用于 6 应用s: Automotive CAN Interface Controller, LIN Submodule Controller, Industrial Sensor Gateway, Low-Power Actuator Controller, Building Automation Node, Battery-Powered Embedded Instrument.
Automotive CAN Interface Controller
The R5F10AMEKFB#V5 fits compact automotive control modules because the RL78/F13 provides a 24 MHz 16-bit core, built-in CAN module, RAM ECC, PLL lock function, and port-output state monitoring. It can manage diagnostic communication, supervisory logic, and actuator commands without requiring a separate communications microcontroller. Use an appropriate CAN transceiver and protection network, keep the bus traces away from noisy power paths, and confirm the exact automotive qualification requirement for the selected ordering configuration before production release.
推荐
LIN Submodule Controller
The R5F10AMEKFB#V5 is suitable for LIN-controlled vehicle submodules, body electronics, and compact actuator nodes because its RL78/F13 core integrates both CAN and LIN interfaces. At up to 24 MHz, the MCU can execute communication handling and local control while low-consumption-current operation supports duty-cycled systems. The board must include a LIN transceiver, correct bus capacitance handling, ESD protection, and a ground strategy compatible with the vehicle electrical environment; verify qualification and temperature requirements against the exact ordering code.
推荐
Industrial Sensor Gateway
The R5F10AMEKFB#V5 can serve as the control core of a compact industrial sensor gateway that combines local acquisition, status monitoring, and serial communications. The 16-bit RL78 architecture and 24 MHz operating frequency provide deterministic control for sensor conditioning and protocol handling, while RAM ECC and port-output monitoring add diagnostic value in unattended installations. Use a robust transceiver, isolated communication where required, and low-power firmware states to reduce maintenance in remote or battery-backed monitoring systems.
推荐
Low-Power Actuator Controller
The R5F10AMEKFB#V5 fits small motor, valve, and actuator controllers where a 24 MHz MCU offers useful control bandwidth without the complexity of a high-power processor. Its low-consumption-current RL78/F13 architecture supports duty-cycled operation, while CAN or LIN connectivity can coordinate commands with a larger machine or vehicle network. Place the MCU decoupling capacitors near the package, use an exposed-pad-aware thermal layout, and verify actuator drive timing and transient margins independently of the communications interface.
推荐
Building Automation Node
The R5F10AMEKFB#V5 can implement a connected building-automation node for lighting, access, environmental, or equipment-control functions. The RL78/F13 combines low current consumption with serial communication options, allowing a compact node to supervise inputs and drive outputs while minimizing standby demand. Communication-line protection, reliable ground references, and careful separation from relay or switching-supply stages are essential. Confirm the target package pinout and ordering details in the manufacturer documentation before committing the PCB footprint.
推荐
Battery-Powered Embedded Instrument
The R5F10AMEKFB#V5 is appropriate for a battery-powered embedded instrument that must balance fast control execution with low standby consumption. The 16-bit RL78/F13 core runs at up to 24 MHz and includes communication interfaces, RAM ECC, PLL lock indication, and port diagnostics to support dependable compact designs. Use the family’s low-power operating modes, disable unused peripherals, and control analog and communication circuitry to maximize battery life. The exact suffix must also satisfy the product’s environmental and qualification requirements.
推荐
推荐产品汇总
工程参考数据: R5F10AMEKFB#V5 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | R5F10AMEKFB#X5 | R5F10AMEKFB#H5 | R5F10AMEKFB |
|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | LFQFP | LFQFP - same | LFQFP - same | LFQFP - same |
| Product Series | RL78/F13 | RL78/F13 | RL78/F13 | RL78/F13 |
| Core Architecture | 16-bit | 16-bit | 16-bit | 16-bit |
| Maximum Core Frequency | 24 MHz | 24 MHz | 24 MHz | 24 MHz |
| CAN Interface | Built-in CAN module | Built-in CAN module | Built-in CAN module | Built-in CAN module |
| LIN Interface | Built-in LIN module | Built-in LIN module | Built-in LIN module | Built-in LIN module |
| RAM ECC | RAM ECC function | RAM ECC function | RAM ECC function | RAM ECC function |
| PLL Lock Function | PLL lock function | PLL lock function | PLL lock function | PLL lock function |
| Port Output State Monitoring | Supported | Supported | Supported | Supported |
| Low Current Consumption | Low-consumption-current RL78/F13 architecture | Low-consumption-current RL78/F13 architecture | Low-consumption-current RL78/F13 architecture | Low-consumption-current RL78/F13 architecture |
关键差异点
- Integrated network-controller functionality (对比 R5F10AMEKFB#H5)
- Diagnostic and reliability functions (对比 R5F10AMEKFB#X5)
- Low-consumption-current family architecture (对比 R5F10AMEKFB)
设计说明
Place every supply decoupling capacitor directly beside its associated LFQFP power pin and the exposed thermal connection. Route supply and ground planes to minimize loop area, maintain a continuous ground reference beneath the package, and use via arrays under the exposed pad where the package drawing permits them. Follow the manufacturer land pattern rather than adapting a generic QFP footprint, because pad length, span, and exposed-pad geometry determine solderability and thermal performance.
Keep CAN and LIN routing away from switching inductors, relay drivers, motor outputs, and high-di/dt power paths. Match communication traces to the required bus impedance, use the manufacturer reference layout for transceiver placement, and provide appropriate ESD and surge protection. Separate analog inputs from digital switching nodes and establish a deliberate grounding strategy between the MCU, transceiver, protection components, and power-conversion stages.
Use the family’s low-power operating modes deliberately in battery-powered or intermittently powered products. Disable unused peripherals, avoid continuously running interfaces that are not required, and budget wake-up and communications latency in the application. Before release, measure the complete system rather than only the MCU because external transceivers, regulators, pull resistors, and indicator circuits can dominate standby consumption.
Do not treat a shared package suffix as proof that every ordering variant is automatically interchangeable. Confirm the exact pinout, electrical limits, operating-temperature grade, qualification, packing, and lifecycle status in the Renesas ordering information. Also verify that the application uses the 24 MHz operating range correctly and that firmware startup, clock initialization, RAM ECC handling, and PLL lock monitoring match the selected device configuration.
合规信息
The family includes functional-safety features, but an exact AEC-Q100 qualification statement and regional material-compliance declarations must be confirmed for the R5F10AMEKFB#V5 ordering configuration.