Renesas Electronics

R5F10AMEKFB#V5 - 16-Bit Low-Power MCU | Renesas Electronics

부품 번호: R5F10AMEKFB#V5 ✓ 활성
Low-consumption-current architecture Id LFQFP surface-mount package Package 24 MHz Speed RAM ECC function Memory
MOQ: 1 |

R5F10AMEKFB#V5 개요

Renesas Electronics R5F10AMEKFB#V5 is a 16-bit RL78/F13 microcontroller designed for low-power embedded control, automotive interfaces, and industrial automation. The device combines a 24 MHz processor core with low current consumption, built-in CAN and LIN communication modules, RAM error-correction functionality, a PLL lock function, and port-output state monitoring. It is supplied in an LFQFP surface-mount package.

An RL78 microcontroller is a compact 16-bit embedded controller within the Renesas MCU family. It combines a CPU core, flash program memory, RAM, timers, serial interfaces, analog and digital I/O, and low-power control functions in one integrated circuit. RL78/F13 devices extend the 78K0R and R8C product generations with low-power operation and communication-oriented peripherals for embedded systems.

The R5F10AMEKFB#V5 is suited to designs that need deterministic embedded control without a high-power application processor. Its CAN and LIN modules support network-connected equipment, while RAM ECC improves reliability in systems where memory faults must be detected. The PLL lock function supports stable clock-dependent behavior, and port-output state monitoring helps firmware confirm that output states match expected operating conditions.

The RL78/F13 family is offered in configurations spanning 20 to 80 pins and 16 KB to 128 KB of flash memory. This broad family range reflects its use across compact sensors, industrial controllers, automotive subsystems, and communication equipment. The low-consumption-current architecture is especially valuable in battery-powered or intermittently powered installations where average energy use determines maintenance intervals and operating life.

Typical uses include CAN-connected industrial equipment, LIN-controlled automotive submodules, compact motor and actuator controllers, low-power sensor interfaces, and household or building automation. For network products, the integrated CAN or LIN interface can reduce component count and board area compared with an MCU that requires an external communications transceiver. The protocol transceiver itself still requires suitable external circuitry.

PCB implementation should preserve the exposed-pad and thermal requirements of the LFQFP package, place decoupling capacitors close to supply pins, and route sensitive analog or communication signals away from high-current switching nodes. Firmware should also use the family’s low-power modes, watchdog functions, RAM ECC, and port diagnostics as part of a robust control strategy.

This product page combines manufacturer family details, packaging information, drop-in family alternatives, and implementation guidance. The comparisons emphasize device identity, communication capabilities, package compatibility, and the engineering checks needed when adapting an RL78/F13 design without changing its PCB footprint.

드롭인 대체품: R5F10AMEKFB#V5 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

R5F10AMEKFB#X5

✅ 드롭인
📦 LFQFP
Same RL78/F13 family and LFQFP footprint; ordering suffix differs by 0% in core frequency and communication feature set

📋 참조 대체품 (카탈로그에 없음)

R5F10AMEKFB#H5

✅ 드롭인
📦 LFQFP
Same RL78/F13 family and LFQFP footprint; ordering suffix differs by 0% in core frequency and communication feature set

📋 참조 대체품 (카탈로그에 없음)

R5F10AMEKFB

✅ 드롭인
📦 LFQFP
Base R5F10AMEKFB ordering code with the same 24 MHz RL78/F13 family and LFQFP format; final suffix must be assigned for production

📋 참조 대체품 (카탈로그에 없음)

R5F10AMEKFB#V5 최대 정격 & 전기적 특성

Product Type 16-bit microcontroller
Product Series RL78/F13
Maximum Core Frequency 24 MHz
Architecture 16-bit RL78
CAN Interface Built-in CAN module
LIN Interface Built-in LIN module
Memory Error Correction RAM ECC function
Clock Control PLL lock function
Port Diagnostics Port output state monitoring
Functional Safety Feature Functional safety feature
패키지 LFQFP surface-mount package
Family Flash Memory Range 16 KB to 128 KB
Family Pin Count Range 20 to 80 pins
Low Current Consumption Low-consumption-current architecture
Product Lineage Successor to 78K0R and R8C

R5F10AMEKFB#V5 lfqfp surface-mount package 핀 구성 가이드

R5F10AMEKFB#V5(lfqfp surface-mount package 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

R5F10AMEKFB#V5의 lfqfp surface-mount package 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: R5F10AMEKFB#V5.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

R5F10AMEKFB#V5 적합 용도: 6 애플리케이션s: Automotive CAN Interface Controller, LIN Submodule Controller, Industrial Sensor Gateway, Low-Power Actuator Controller, Building Automation Node, Battery-Powered Embedded Instrument.

🚗

Automotive CAN Interface Controller

The R5F10AMEKFB#V5 fits compact automotive control modules because the RL78/F13 provides a 24 MHz 16-bit core, built-in CAN module, RAM ECC, PLL lock function, and port-output state monitoring. It can manage diagnostic communication, supervisory logic, and actuator commands without requiring a separate communications microcontroller. Use an appropriate CAN transceiver and protection network, keep the bus traces away from noisy power paths, and confirm the exact automotive qualification requirement for the selected ordering configuration before production release.

🚗

LIN Submodule Controller

The R5F10AMEKFB#V5 is suitable for LIN-controlled vehicle submodules, body electronics, and compact actuator nodes because its RL78/F13 core integrates both CAN and LIN interfaces. At up to 24 MHz, the MCU can execute communication handling and local control while low-consumption-current operation supports duty-cycled systems. The board must include a LIN transceiver, correct bus capacitance handling, ESD protection, and a ground strategy compatible with the vehicle electrical environment; verify qualification and temperature requirements against the exact ordering code.

🏭

Industrial Sensor Gateway

The R5F10AMEKFB#V5 can serve as the control core of a compact industrial sensor gateway that combines local acquisition, status monitoring, and serial communications. The 16-bit RL78 architecture and 24 MHz operating frequency provide deterministic control for sensor conditioning and protocol handling, while RAM ECC and port-output monitoring add diagnostic value in unattended installations. Use a robust transceiver, isolated communication where required, and low-power firmware states to reduce maintenance in remote or battery-backed monitoring systems.

⚡

Low-Power Actuator Controller

The R5F10AMEKFB#V5 fits small motor, valve, and actuator controllers where a 24 MHz MCU offers useful control bandwidth without the complexity of a high-power processor. Its low-consumption-current RL78/F13 architecture supports duty-cycled operation, while CAN or LIN connectivity can coordinate commands with a larger machine or vehicle network. Place the MCU decoupling capacitors near the package, use an exposed-pad-aware thermal layout, and verify actuator drive timing and transient margins independently of the communications interface.

🧩

Building Automation Node

The R5F10AMEKFB#V5 can implement a connected building-automation node for lighting, access, environmental, or equipment-control functions. The RL78/F13 combines low current consumption with serial communication options, allowing a compact node to supervise inputs and drive outputs while minimizing standby demand. Communication-line protection, reliable ground references, and careful separation from relay or switching-supply stages are essential. Confirm the target package pinout and ordering details in the manufacturer documentation before committing the PCB footprint.

🔧

Battery-Powered Embedded Instrument

The R5F10AMEKFB#V5 is appropriate for a battery-powered embedded instrument that must balance fast control execution with low standby consumption. The 16-bit RL78/F13 core runs at up to 24 MHz and includes communication interfaces, RAM ECC, PLL lock indication, and port diagnostics to support dependable compact designs. Use the family’s low-power operating modes, disable unused peripherals, and control analog and communication circuitry to maximize battery life. The exact suffix must also satisfy the product’s environmental and qualification requirements.

추천 제품 요약

R5F10AMEKFB#X5 Same-family CAN-capable configuration 사용처: Automotive CAN Interface Controller, LIN Submodule Controller, Industrial Sensor Gateway, Low-Power Actuator Controller, Building Automation Node, Battery-Powered Embedded Instrument R5F10AMEKFB#H5 Same-family alternative with integrated CAN 사용처: Automotive CAN Interface Controller, LIN Submodule Controller, Industrial Sensor Gateway, Low-Power Actuator Controller, Building Automation Node, Battery-Powered Embedded Instrument
What is the R5F10AMEKFB#V5 microcontroller?
The R5F10AMEKFB#V5 is a Renesas Electronics 16-bit RL78/F13 microcontroller operating at up to 24 MHz and packaged in an LFQFP. According to the manufacturer RL78/F13 product information, the family includes built-in CAN and LIN modules, RAM ECC, a PLL lock function, functional-safety features, and port-output state monitoring. It is intended for low-power embedded control, automotive interfaces, and industrial automation.
What are the key specifications of R5F10AMEKFB#V5 that engineers should know?
The R5F10AMEKFB#V5 combines a 16-bit RL78 core, a maximum clock frequency of 24 MHz, low-consumption-current operation, and an LFQFP package. According to the Renesas RL78/F13 family information, the family also provides CAN and LIN communication modules, RAM ECC, PLL lock monitoring, functional-safety features, and port-output state monitoring. The family is offered from 20 to 80 pins with 16 KB to 128 KB of flash memory.
Where can I download the R5F10AMEKFB#V5 datasheet PDF?
Download the R5F10AMEKFB#V5 documentation from the linked Renesas RL78/F13 product page or use the manufacturer datasheet link on this page. The target suffix identifies the specific ordering configuration, while the larger RL78/F13 family documentation covers the shared architecture, peripherals, registers, electrical characteristics, and package information. Use the pin-description and electrical tables in the manufacturer documentation when assigning PCB tracks and selecting decoupling.
Where is the R5F10AMEKFB#V5 pinout?
The R5F10AMEKFB#V5 pin assignment is documented in the Renesas RL78/F13 datasheet and package information. Use the pin-description table for the exact LFQFP configuration rather than assigning signals from a generic 48-pin drawing. Pay particular attention to supply pins, ground connections, analog inputs, port functions, communication signals, reset, and programming or debug functions when laying out the board.
Can R5F10AMEKFB#V5 be used for CAN and LIN automotive systems?
Yes, the R5F10AMEKFB#V5 is appropriate for CAN or LIN-connected automotive subsystems because the RL78/F13 family includes both communication modules. According to the manufacturer product page, the family also provides functional-safety features, RAM ECC, PLL lock indication, and port-output state monitoring. The MCU still requires correctly designed external bus transceivers, protection networks, termination, and wiring according to the selected CAN or LIN standard.
Is R5F10AMEKFB#V5 suitable for low-power industrial control?
The R5F10AMEKFB#V5 fits low-power industrial control when a compact 16-bit MCU, serial communications, and low standby consumption are priorities. Renesas describes the RL78/F13 family as realizing a low level of consumption current and including CAN, LIN, RAM ECC, PLL lock, and output monitoring. These functions support compact sensors, actuator controllers, networked equipment, and intermittently powered automation modules.
What is the difference between R5F10AMEKFB#V5 and R5F10AMEKFB#X5?
The R5F10AMEKFB#V5 and R5F10AMEKFB#X5 are RL78/F13 orderable configurations from Renesas Electronics with the same device-family naming pattern and LFQFP package. The suffix-related configuration differences must be confirmed against the manufacturer ordering table before substitution. Both are same-brand family alternatives, but production or qualification status, temperature range, packing, and parameter coverage should be checked against the specific BOM requirement.
What is the difference between R5F10AMEKFB#V5 and R5F10AMEKFB#H5?
The R5F10AMEKFB#H5 is a same-family Renesas RL78/F13 configuration offered in an LFQFP package and is the closest documented alternative to the R5F10AMEKFB#V5. The manufacturer describes the H5 variant with the same core family and integrated CAN, LIN, RAM ECC, PLL lock, and port-monitoring capabilities. Confirm the exact ordering suffix, temperature grade, packing, and lifecycle status before approving it as a drop-in procurement alternative.
When should I choose R5F10AMEKFB#V5 over R5F10AMEKFB#X5?
Choose the R5F10AMEKFB#V5 when its exact ordering code meets the production requirements for temperature grade, packing, qualification, and regional availability. Choose the R5F10AMEKFB#X5 when that manufacturer configuration better matches the required lifecycle or supply plan. Because both are variants in the same RL78/F13 family and LFQFP package, firmware compatibility is likely strong, but the ordering table and errata must still be checked before release.
What can replace R5F10AMEKFB#V5 on the same PCB?
The documented same-footprint candidates are the Renesas R5F10AMEKFB#X5 and R5F10AMEKFB#H5, both members of the RL78/F13 family in an LFQFP package. They provide the closest engineering path because the core, memory family, and CAN/LIN feature set are closely related. Before replacing the device, verify pin-level compatibility, electrical limits, temperature grade, qualification, packing, and any ordering-code restrictions in the Renesas documentation.
Is the R5F10AMEKFB#X5 the same as the R5F10AMEKFB#V5?
The R5F10AMEKFB#X5 is a closely related RL78/F13 member of the R5F10AMEKFB family, but it is not automatically identical to the R5F10AMEKFB#V5 ordering configuration. Both use the LFQFP format and share the family’s 16-bit architecture, 24 MHz maximum frequency, CAN, LIN, RAM ECC, PLL lock, and output-monitoring features. Check the ordering table for qualification, temperature, packing, and lifecycle differences.
Where can I buy R5F10AMEKFB#V5 online?
Use the Request a Quote form on this page to request R5F10AMEKFB#V5 pricing, stock confirmation, minimum order quantity, and lead time. The form provides a direct quote path without relying on potentially stale catalog figures. Include the exact MPN R5F10AMEKFB#V5, target quantity, date code requirement, and whether reel, tray, or another packing format is required.
What is the price of R5F10AMEKFB#V5?
The current R5F10AMEKFB#V5 price depends on order quantity, device condition, packing, date code, and supply status. Request a formal quotation through the Request a Quote form on this page so the commercial response can reflect those factors. Include the exact R5F10AMEKFB#V5 MPN and required production quantity to avoid pricing a related RL78/F13 suffix by mistake.
What is the lead time and stock status for R5F10AMEKFB#V5?
Current stock and lead time for R5F10AMEKFB#V5 should be confirmed through the Request a Quote form on this page. Provide the annual and initial build quantities, required delivery date, acceptable date codes, and packaging preference. Those details allow the commercial response to distinguish an immediate allocation from a scheduled production or replenishment plan for the exact ordering configuration.
How do I design a reliable RL78/F13 CAN or LIN board?
Design the R5F10AMEKFB#V5 communications board around the manufacturer pin and electrical tables, then isolate the bus transceiver from the MCU supply and digital signals. Provide the required bus termination, protection, common-mode handling, and transceiver decoupling, and route the bus away from switching nodes and sensitive analog inputs. Enable firmware checks for communication faults, port states, RAM ECC events, and PLL lock status where appropriate.

엔지니어링 참조 데이터: R5F10AMEKFB#V5 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Select the R5F10AMEKFB#V5 when it satisfies the required temperature grade, qualification, packing, lifecycle, and regional supply conditions. Its 24 MHz 16-bit RL78/F13 core, low current consumption, integrated CAN and LIN modules, RAM ECC, PLL lock function, and port-output monitoring make it well suited to automotive submodules, industrial gateways, actuator controllers, and connected low-power equipment. The R5F10AMEKFB#X5 or R5F10AMEKFB#H5 may be preferable when their specific ordering configuration offers a better lifecycle or availability fit, but suffix-level differences must be checked in the manufacturer ordering table. A different package or another MCU family should not be treated as a drop-in option because pin assignments, electrical characteristics, toolchains, firmware startup, and peripheral implementations may differ.

대체품과의 비교

파라미터 이 제품 R5F10AMEKFB#X5 R5F10AMEKFB#H5 R5F10AMEKFB
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package LFQFP LFQFP - same LFQFP - same LFQFP - same
Product Series RL78/F13 RL78/F13 RL78/F13 RL78/F13
Core Architecture 16-bit 16-bit 16-bit 16-bit
Maximum Core Frequency 24 MHz 24 MHz 24 MHz 24 MHz
CAN Interface Built-in CAN module Built-in CAN module Built-in CAN module Built-in CAN module
LIN Interface Built-in LIN module Built-in LIN module Built-in LIN module Built-in LIN module
RAM ECC RAM ECC function RAM ECC function RAM ECC function RAM ECC function
PLL Lock Function PLL lock function PLL lock function PLL lock function PLL lock function
Port Output State Monitoring Supported Supported Supported Supported
Low Current Consumption Low-consumption-current RL78/F13 architecture Low-consumption-current RL78/F13 architecture Low-consumption-current RL78/F13 architecture Low-consumption-current RL78/F13 architecture

주요 차별점

  • Integrated network-controller functionality (vs R5F10AMEKFB#H5)
  • Diagnostic and reliability functions (vs R5F10AMEKFB#X5)
  • Low-consumption-current family architecture (vs R5F10AMEKFB)

설계 노트

Place every supply decoupling capacitor directly beside its associated LFQFP power pin and the exposed thermal connection. Route supply and ground planes to minimize loop area, maintain a continuous ground reference beneath the package, and use via arrays under the exposed pad where the package drawing permits them. Follow the manufacturer land pattern rather than adapting a generic QFP footprint, because pad length, span, and exposed-pad geometry determine solderability and thermal performance.

Keep CAN and LIN routing away from switching inductors, relay drivers, motor outputs, and high-di/dt power paths. Match communication traces to the required bus impedance, use the manufacturer reference layout for transceiver placement, and provide appropriate ESD and surge protection. Separate analog inputs from digital switching nodes and establish a deliberate grounding strategy between the MCU, transceiver, protection components, and power-conversion stages.

Use the family’s low-power operating modes deliberately in battery-powered or intermittently powered products. Disable unused peripherals, avoid continuously running interfaces that are not required, and budget wake-up and communications latency in the application. Before release, measure the complete system rather than only the MCU because external transceivers, regulators, pull resistors, and indicator circuits can dominate standby consumption.

Do not treat a shared package suffix as proof that every ordering variant is automatically interchangeable. Confirm the exact pinout, electrical limits, operating-temperature grade, qualification, packing, and lifecycle status in the Renesas ordering information. Also verify that the application uses the 24 MHz operating range correctly and that firmware startup, clock initialization, RAM ECC handling, and PLL lock monitoring match the selected device configuration.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The family includes functional-safety features, but an exact AEC-Q100 qualification statement and regional material-compliance declarations must be confirmed for the R5F10AMEKFB#V5 ordering configuration.

관련 검색

R5F10AMEKFB#V5 datasheet R5F10AMEKFB#V5 pinout R5F10AMEKFB#V5 datasheet pdf R5F10AMEKFB#V5 equivalent R5F10AMEKFB#V5 replacement R5F10AMEKFB#V5 footprint R5F10AMEKFB#V5 price R5F10AMEKFB#V5 stock Renesas R5F10AMEKFB#V5 R5F10AMEKFB#V5 vs R5F10AMEKFB#X5 RL78/F13 LFQFP microcontroller R5F10AMEKFB#V5 automotive application

관련 부품 & 용어

Renesas Electronics R5F10AMEKFB#V5 R5F10AMEKFB#X5 R5F10AMEKFB#H5 R5F10AMEKFB RL78/F13 RL78 16-bit microcontroller embedded microcontroller microcontroller semiconductor CAN LIN RAM ECC PLL lock function port output state monitoring functional safety 24 MHz LFQFP QFP family surface-mount package automotive electronics industrial automation low-power control
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기