R5F10PLGLFB#V5 - 16-Bit RL78/F14 MCU | Renesas Electronics
料号: R5F10PLGLFB#V5 ✓ 量产中R5F10PLGLFB#V5 概述
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces on one device. In the broader hierarchy, an MCU is an embedded controller and semiconductor. The RL78/F14 uses a 16-bit architecture intended for automotive and industrial control systems where low standby consumption, peripheral integration, and deterministic control functions are important.
Key family-level features include an integrated CAN module, an integrated LIN module, timer RD, a comparator, and support for brushless DC motor control. Functional-safety features are also highlighted for BLDC applications. These capabilities allow a controller to manage vehicle communication, motor drive, sensing, and timing without requiring several separate interface ICs.
The R5F10PLGLFB#V5 uses the R5F10PL family designation and is supplied in a 64-pin gull-wing surface-mount package. The exact flash configuration, clock rating, memory map, peripheral complement, electrical limits, and temperature grade for this suffix require confirmation in the manufacturer datasheet before production release. The #V5 ordering suffix also must not be interpreted as a standalone electrical specification without the corresponding ordering-information table.
Typical uses include automotive body and motor-control modules, CAN or LIN gateways, sensor controllers, actuator controllers, and compact low-power electronic control units. The CAN interface suits vehicle networking, while LIN can connect lower-cost peripheral nodes. BLDC motor-control support is relevant to pumps, fans, and compact actuator systems where a quiet, efficient motor drive is required.
Design decisions should begin with confirming the exact pin assignment, peripheral allocation, clock tree, and memory organization in the R5F10PLGLFB datasheet. PCB layout must preserve the package pad geometry and provide clean grounding and decoupling for both interface and internal supply rails. Firmware should also validate pin multiplexing, reset behavior, watchdog operation, and the required startup sequence.
This product record combines the verified family capabilities, package identification, sourcing data, drop-in replacement analysis, and practical design guidance. It distinguishes confirmed manufacturer information from suffix-specific parameters that still require direct datasheet verification, helping engineers qualify the device without relying on generic microcontroller assumptions.
直接替换替代料: R5F10PLGLFB#V5 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
R5F10PLJLFB#V5
✅ 直接替换📋 参考替代料(不在目录中)
R5F10PLHLFB#V5
✅ 直接替换📋 参考替代料(不在目录中)
R5F10PLGCLFB#55
✅ 直接替换📋 参考替代料(不在目录中)
R5F10BLGLFB#V5
✅ 直接替换📋 参考替代料(不在目录中)
R5F10PPGLFB#X5
✅ 直接替换📋 参考替代料(不在目录中)
R5F10PLGLFB#V5 最大额定值与电气特性
| Microcontroller Family | RL78/F14 |
| CPU Architecture | 16-bit |
| Target Market | Automotive |
| 封装 | 64-pin LFQFP |
| 安装类型 | Surface mount, gull wing |
| Family Flash Memory Range | 48 KB to 256 KB |
| Family Pin-Count Range | 30 pins to 100 pins |
| CAN Interface | 1 built-in CAN module |
| LIN Interface | 1 built-in LIN module |
| Motor Control | BLDC motor control supported |
| Timer | Timer RD |
| Analog Comparator | 1 comparator |
| Functional Safety Features | Supported for BLDC motor control |
| Low Consumption | Low-power RL78/F14 family |
| ADC Resolution | 8-bit |
| DAC Channels | 1-channel 8-bit DAC |
| RoHS 状态 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
R5F10PLGLFB#V5 64-pin lfqfp 引脚配置指南
R5F10PLGLFB#V5(64-pin lfqfp 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: R5F10PLGLFB#V5.
请参阅 数据手册 以查看完整引脚配置。
典型应用
R5F10PLGLFB#V5 适用于 6 应用s: Automotive CAN Control Module, LIN Sensor and Actuator Hub, BLDC Motor Controller, Automotive Sensor Controller, Compact Actuator Control Unit, Low-Power Body Electronics.
Automotive CAN Control Module
The R5F10PLGLFB#V5 fits a compact vehicle control module because the RL78/F14 family includes a built-in CAN module, a 16-bit RL78 architecture, and low-power-consumption characteristics. It can manage diagnostic or body-control messages while coordinating timers, comparator inputs, and local actuator outputs. Its 64-pin LFQFP package also provides access to a broader pin count than smaller RL78 variants, although the exact CAN terminals, transceiver voltage, and peripheral multiplexing must be selected from the device pin table.
推荐
LIN Sensor and Actuator Hub
The R5F10PLGLFB#V5 can serve as a LIN sensor or actuator hub because the RL78/F14 family combines a built-in LIN module with a 16-bit control core. A control unit can poll lower-cost automotive sensors, evaluate comparator or ADC-related inputs, and control lamp, latch, or motor-related outputs through the same device. The integration reduces the number of separate communication ICs, while the exact LIN baud-rate support, pin multiplexing, and transceiver level must be checked against the suffix-specific datasheet.
推荐
BLDC Motor Controller
The R5F10PLGLFB#V5 is suitable for a BLDC motor-control subsystem because the RL78/F14 family provides timer RD, comparator support, functional-safety features, and dedicated BLDC capability. These resources can support commutation timing, rotor-position sensing, fault detection, and PWM generation in compact pumps, fans, or automotive actuators. The 64-pin package offers a useful balance between I/O access and board area, but firmware and layout must use only the timers, comparator channels, and outputs assigned to this exact device.
推荐
Automotive Sensor Controller
The R5F10PLGLFB#V5 can consolidate an automotive sensing node that evaluates analog inputs, handles threshold decisions, filters data, and communicates results over CAN or LIN. Its 16-bit RL78 core and 64-pin LFQFP format provide more I/O and peripheral flexibility than the smallest RL78 devices, while the family’s low-consumption focus suits battery-backed modules. Exact ADC channels, acquisition timing, comparator inputs, and supply requirements must be checked in the device documentation before sensor calibration.
推荐
Compact Actuator Control Unit
The R5F10PLGLFB#V5 can act as the supervisory controller in a compact actuator module containing a motor, position sensor, and network interface. Timer RD supports periodic timing, comparator resources can assist with sensor or protection functions, and CAN or LIN provides diagnostic connectivity. This integration is useful where an automotive ECU must perform local closed-loop control while remaining responsive to network commands. The exact PWM channels, interrupt vectors, and peripheral assignments require validation for the 64-pin pinout.
推荐
Low-Power Body Electronics
The R5F10PLGLFB#V5 suits body-electronics modules requiring always-connected networking, periodic sensing, and low standby activity. The RL78/F14 family’s low-consumption focus can help control energy use in vehicle modules, while its CAN and LIN modules reduce the need for separate interface components. A practical design should define sleep and wake conditions, validate oscillator start-up behavior, and retain sufficient I/O for switch inputs and protection outputs. Exact low-power modes and wake sources must be selected from the R5F10PL documentation.
推荐
推荐产品汇总
工程参考数据: R5F10PLGLFB#V5 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | R5F10PLJLFB#V5 | R5F10PLHLFB#V5 | R5F10PLGCLFB#55 | R5F10BLGLFB#V5 | R5F10PPGLFB#X5 |
|---|---|---|---|---|---|---|
| Package | 64-pin LFQFP | 64-pin LFQFP class | 64-pin LFQFP class | 64-pin LFQFP class | 64-pin LFQFP | 64-pin LFQFP class |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| CPU Architecture | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 |
| Family | RL78/F14 | RL78/F14 | RL78/F14 | RL78/F14 | RL78/F13 | RL78/F13 or RL78/F14 automotive family listing |
| Ordering Suffix | #V5 | #V5 | #V5 | #55 | #V5 | #X5 |
| Automotive Positioning | Automotive RL78/F14 | Automotive RL78/F14 | Automotive RL78/F14 | Automotive RL78/F14 | Automotive RL78/F13 | Automotive RL78/F13 or RL78/F14 listing |
关键差异点
- Automotive RL78/F14 integration (对比 R5F10BLGLFB#V5)
- Closest same-family ordering match (对比 R5F10PLJLFB#V5)
- Network and motor-control integration (对比 R5F10PPGLFB#X5)
- Same automotive family ordering pathway (对比 R5F10PLGCLFB#55)
设计说明
Assign the LFQFP lands by functional group rather than by a generic 64-pin pattern. Keep the MCU power and decoupling pins close to their corresponding ground-plane connections, maintain the manufacturer-recommended via and copper geometry, and reserve every no-connect and unused peripheral terminal. Because alternate-function assignments can move communication, timer, and analog signals among pins, freeze the pin plan only after comparing the schematic against the device pin-description table.
Route CAN, LIN, and high-speed timer signals away from switching nodes and analog inputs, while keeping return paths continuous. For CAN, use the transceiver and termination arrangement specified by its device documentation rather than adding or changing termination directly from the MCU pins. For LIN, pay particular attention to transceiver placement and return-path continuity. Although the MCU is a 16-bit embedded controller, interface timing, impedance, and electromagnetic compatibility still depend on the complete board layout.
Budget the MCU's internal and I/O supply domains independently, including the voltage required by the selected CAN or LIN transceiver. Place bulk and local ceramic decoupling at the supply pins and keep high-current motor-driver paths separate from sensitive return areas. Verify startup, brownout, and sleep-mode current against the exact #V5 electrical characteristics. Estimated: if the MCU consumes 10 mA at a 5 V core rail, its rail power is 50 mW; this excludes I/O current, analog peripherals, transceivers, and external motor circuitry.
Do not substitute an R5F10PL part solely because the package and ordering suffix appear similar. Compare flash capacity, RAM, peripheral channels, clock limits, pin multiplexing, temperature grade, and ordering code before treating it as a drop-in replacement. In particular, R5F10BLGLFB#V5 is identified as an RL78/F13-family part with a 128/8 memory configuration, so its timer, communication, and pin-function compatibility must be checked explicitly.
合规信息
The R5F10PL family is identified for automotive interfaces, but suffix-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from Renesas product-entry or quality documentation.