RTAX4000DL-1CGD1272EV - 4M Gate Rad-Tolerant FPGA | Microchip
料号： RTAX4000DL-1CGD1272EV ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $4980 | $4,980.00 |
| 10 | $4731 | $47,310.00 |
| 100 | $4482 | $448,200.00 |
| 500 | $4233 | $2,116,500.00 |
| 1,000 | $3984 | $3,984,000.00 |
RTAX4000DL-1CGD1272EV 概述
A radiation-tolerant FPGA is a field-programmable gate array engineered to survive the ionizing radiation environments of spaceflight, including total ionizing dose (TID), single-event latchup (SEL), and single-event upset (SEU) conditions. Within the power-management hierarchy of spacecraft avionics, these devices sit between fully rad-hard ASICs (expensive, inflexible) and commercial FPGAs (not space-qualified), offering flight-programmable logic with high reliability.
Key features include the 4M-gate capacity suitable for complex on-board data processing, embedded DSP-friendly multiply-accumulate structures in the DL (DSP-Logic) variant, flash-based Live-at-Power-Up configuration via an external boot PROM, and low-power CMOS operation at 1.5V core voltage. The -1 speed grade and extended ceramic package target stringent flight programs.
The RTAX-DSP architecture combines the proven RTAX-S logic fabric with dedicated DSP blocks, using antifuse-based one-time programmable interconnect that is inherently immune to configuration upsets, unlike SRAM-based FPGAs. Only user flip-flops are SEU-sensitive and can be protected by triple-module redundancy in the design flow using Libero IDE and SoftConsole tooling.
Typical applications include satellite payload data processing, spacecraft command and data handling (C&DH), software-defined radio front ends on orbiters, and instrument control for deep-space probes.
Designers should plan the boot PROM interface early: the device loads its design from an external anti-fuse or flash PROM at power-up, and the 1272-pad CCGA demands careful PCB footprint and column-solder process control.
This page synthesizes distributor availability data, drop-in family alternatives, and practical spaceflight design notes not found in a single manufacturer datasheet.
直接替换替代料： RTAX4000DL-1CGD1272EV ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： RTAX4000DL-1CGD1272EV （相同外形与封装尺寸） ——差异在于 Configuration, Family, Logic Cells, Package, Core Supply Voltage.
快速对比工具——选择替代料号进行并排对比：
RTAX4000DL-1CGD1272V
✅ 直接替换📋 参考替代料（不在目录中）
RTAX4000DL-CGD1272V
✅ 直接替换📋 参考替代料（不在目录中）
RTAX4000SL-1LG1272B
✅ 直接替换✓ 有现货
$9200 / 个
查看数据手册 →RTAX4000SL-CG1272V
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →RTAX4000SL-1LG1272B
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$9200 / 个
查看数据手册 →RTAX4000DL-1CGD1272EV 最大额定值与电气特性
| Family | RTAX-DSP |
| Equivalent Gates | 4,000,000 |
| Logic Cells | 55,440 |
| CLBs | 36,960 |
| Process Technology | 0.15 um CMOS |
| Core Supply Voltage | 1.5 V |
| Speed Grade | -1 |
| 封装 | 1272-Pin CCGA (ceramic column grid array) |
| 安装类型 | Surface Mount |
| Radiation Tolerance | Radiation-tolerant (space-flight grade) |
| Configuration | Live-at-Power-Up (external boot PROM) |
| Program Technology | Antifuse (one-time programmable) |
RTAX4000DL-1CGD1272EV 1272-pin ccga (ceramic column grid array) 引脚配置指南
RTAX4000DL-1CGD1272EV（1272-pin ccga (ceramic column grid array) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： RTAX4000DL-1CGD1272EV.
请参阅 数据手册 以查看完整引脚配置。
典型应用
RTAX4000DL-1CGD1272EV 适用于 6 应用s: Satellite Payload Data Processing, Spacecraft Command and Data Handling (C&DH), Space Software-Defined Radio (SDR), Deep-Space Instrument Control, On-Board Image Compression and Fusion, Launch Vehicle Avionics.
Satellite Payload Data Processing
The RTAX4000DL-1CGD1272EV fits satellite payload processing because it combines 4,000,000 equivalent gates, 55,440 logic cells, and dedicated DSP multiply-accumulate blocks, enabling on-board implementation of FIR filters, FFTs, and image-compression pipelines that would otherwise require downlinking raw sensor data. Its antifuse fabric is immune to configuration upsets, so only user flip-flops need triple-module redundancy, preserving the majority of the 36,960 CLBs for useful computation. In a typical payload chain the device sits between the sensor front end and the downlink formatter, clocked from a radiation-hardened oscillator, with the 1.5V core keeping power within spacecraft bus budgets. The 1272-pin CCGA provides the I/O count and hermetic reliability required for multi-year orbital missions.
推荐
Spacecraft Command and Data Handling (C&DH)
For C&DH modules, the RTAX4000DL-1CGD1272EV implements telemetry encoding, command decoding, memory controllers, and 1553/SpaceWire-style interface glue logic within a single rad-tolerant device. Live-at-Power-Up configuration means the FPGA is operational immediately when the spacecraft bus energizes, without waiting for a processor to load configuration - a critical property for autonomous safe-mode recovery. The 4M-gate capacity absorbs multiple legacy ASIC or discrete functions, consolidating board real estate and reducing solder-joint count, while the 0.15 um antifuse process at 1.5V core draws low static power during eclipse operations. Designers typically pair it with an external boot PROM and a rad-hard microcontroller that supervises housekeeping, reserving the DL's fabric for time-critical protocol handling.
推荐
Space Software-Defined Radio (SDR)
Space SDR front ends benefit directly from the RTAX4000DL's dedicated DSP multiply-accumulate blocks, which implement digital down-conversion mixers, decimating filters, and matched filters at the sample rates of typical spacecraft receivers without consuming general-purpose CLB resources. According to Microchip, the RTAX-DSP family was created precisely for these signal-chain workloads in space-flight systems. The 55,440 logic cells handle framing, FEC (Reed-Solomon or convolutional coding), and MAC-layer state machines alongside the DSP datapath, and the 1272-pin CCGA supplies the wide parallel I/O needed for multi-channel ADC/DAC interfaces. The antifuse configuration is immune to SEU-driven loss of fabric function - a key differentiator versus SRAM FPGAs that must scrub configuration continuously in orbit.
推荐
Deep-Space Instrument Control
Deep-space instruments - spectrometers, imagers, and plasma sensors - require deterministic sequencing and long-mission reliability that the RTAX4000DL-1CGD1272EV provides through its one-time-programmable antifuse fabric and hermetic ceramic CCGA package. Instrument control logic such as exposure timing, detector clocking, and high-voltage supply sequencing fits comfortably within the 36,960 CLBs, while the DSP blocks perform on-board co-adding and baseline subtraction to reduce downlink volume. The 0.15 um process tolerates the total ionizing dose profiles of multi-year cruises, and the 1.5V core minimizes power when the instrument operates from limited radioisotope or solar margins. Live-at-Power-Up behavior guarantees the instrument is controllable from the first turn-on after launch-separation anomaly recovery.
推荐
On-Board Image Compression and Fusion
Earth-observation and reconnaissance payloads use the RTAX4000DL-1CGD1272EV to run JPEG-like discrete-cosine and wavelet compression engines on raw image streams before downlink, multiplying effective mission data return within fixed transponder bandwidth. The dedicated DSP MACs execute the transform inner loops while the 55,440 logic cells manage DMA-style streaming from the image sensor interface, entropy coding, and packetization. Compared with a software solution on a rad-hard CPU, the FPGA datapath sustains line rates that software cannot reach at acceptable power; compared with an ASIC, it remains reprogrammable between missions via the boot PROM image. The wide 1272-column CCGA interface supports high-parallelism sensor adapters in a single hermetic package suitable for flight qualification.
推荐
Launch Vehicle Avionics
Launch-vehicle flight computers and stage-separation controllers adopt the RTAX4000DL-1CGD1272EV for voting logic, redundancy management, and high-speed bus bridging where single-chip operation reduces the failure surface of multi-FPGA architectures. Microchip highlights the family's true single-chip form factor and live-at-power-up operation as decisive advantages for launch timelines, since no configuration-load failure mode exists at the fabric level. The 4M-gate capacity implements triple-module-redundant comparators, 1553 and discrete I/O, and telemetry packing simultaneously, while the -1 speed grade timing supports the deterministic latencies demanded by separation-event sequencing. The ceramic CCGA withstands the vibration and thermal shock profile of boost phases better than plastic-packaged commercial FPGAs.
推荐
推荐产品汇总
工程参考数据： RTAX4000DL-1CGD1272EV ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | RTAX4000DL-1CGD1272V | RTAX4000DL-CGD1272V | RTAX4000SL-1LG1272B | RTAX4000SL-CG1272V |
|---|---|---|---|---|---|
| Package | 1272-Pin CCGA | 1272-Pin CCGA - same | 1272-Pin CCGA - same | 1272-Pin CCGA - same | 1272-Pin CCGA - same |
| Brand | Microchip Technology (Actel) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Equivalent Gates | 4,000,000 | 4,000,000 | 4,000,000 | 4,000,000 | 4,000,000 |
| Logic Cells | 55,440 | 55,440 | 55,440 | 55,440 | 55,440 |
| DSP Blocks | Yes (DL variant) | Yes | Yes | No (SL family) | No (SL family) |
| Speed Grade | -1 | -1 | Standard | -1 | Standard |
| Core Supply Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Process Technology | 0.15 um CMOS | 0.15 um CMOS | 0.15 um CMOS | 0.15 um CMOS | 0.15 um CMOS |
关键差异点
- Dedicated DSP multiply-accumulate blocks （对比 RTAX4000SL-1LG1272B)
- SEU-immune configuration fabric （对比 RTAX4000DL-1CGD1272V)
- Faster -1 speed grade timing （对比 RTAX4000DL-CGD1272V)
设计说明
The 1272-pin CCGA uses solder columns rather than solder balls, which accommodates CTE mismatch between the ceramic package and typical flight PCB laminates. Follow the column-solder reflow profile from the Microchip RTAX-S/SL and RTAX-DSP datasheet and inspect joints via X-ray, since columns hide cold-joint defects that ball-grid arrays would reveal optically. Use a stiffener or symmetric stack-up around the FPGA to limit board warp during thermal cycling.
The RTAX4000DL is one-time programmable: once antifuses are burned, the die cannot be reprogrammed. Never program flight units with unverified designs - use Microchip's PROTO prototype units, which share the same timing attributes as flight units in non-hermetic ceramic packages, to burn and validate your bitstream first. Plan a spare die per board for program-risk mitigation, and verify boot PROM compatibility before committing flight hardware.
The 1.5V core supply must meet the sequencing and ripple requirements in the Microchip RTAX-S/SL and RTAX-DSP datasheet. Estimated: for mid-density utilization, core current is commonly in the hundreds-of-milliamp range; size the core regulator for peak configuration current, which exceeds steady-state operation during boot-PROM load. Add bulk plus high-frequency ceramic decoupling at the CCGA power columns, and verify I/O bank voltages against your interface standards before layout freeze.
合规信息
No compliance data for this exact MPN in verified web data. Hermetic ceramic CCGA space parts may use leaded solder columns under high-reliability RoHS exemptions - obtain Microchip material declarations per lot.
