SC900844JVK - 14-LDO PMIC for Ultra-Mobile Apps | NXP
料号： SC900844JVK ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $14.85 | $14.85 |
| 10 | $13.62 | $136.20 |
| 100 | $12.18 | $1,218.00 |
| 500 | $10.95 | $5,475.00 |
| 1,000 | $9.74 | $9,740.00 |
SC900844JVK 概述
A power management IC (PMIC) is a single-chip semiconductor device that consolidates multiple voltage regulators, supervision functions, and often battery management onto one die to power complex SoCs, processors, and peripheral subsystems. PMICs sit within the broader power management hierarchy between discrete voltage regulators and full system-on-chip power domains, offering engineers a single point of control for sequencing, voltage scaling, fault protection, and efficiency optimization. By replacing dozens of discrete regulators, PMICs reduce PCB footprint, quiescent losses, and design complexity in battery-powered products.
Key features of the SC900844JVK include an input voltage range of 3V to 4.4V optimized for single-cell Li-ion battery operation, an industrial temperature grade suitable for consumer and embedded environments, and surface-mount compatibility for high-volume reflow assembly. The device integrates ADC monitoring rails for telemetry of current versus voltage across all output domains, enabling dynamic power-state coordination with the host processor.
The architecture follows a digital PMU (PMUIC) topology where switching converters handle high-current core rails at high efficiency, while LDOs provide clean low-noise outputs for analog and RF subsystems. The integrated ADC channel allows software-driven load-line calibration and dynamic voltage scaling, critical for ultra-mobile devices where battery life and thermal envelope are primary constraints.
Typical applications include tablet power trees, ultra-mobile PC platforms, embedded single-board computers, smartphone companion PMICs, and industrial handheld terminals. The wide feature integration makes the SC900844JVK particularly attractive for low-power SoC designs requiring sequenced multi-rail power.
Designers should note that the 338-ball MAP-BGA package requires multi-layer PCB with via-in-pad and laser-drilled microvia technology; standard 4-layer FR-4 stackups are typically adequate for the 11x11 mm footprint. Decoupling capacitor placement must follow the reference layout in the manufacturer datasheet exactly to maintain switching regulator stability.
直接替换替代料： SC900844JVK ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： SC900844JVK （相同外形与封装尺寸） ——差异在于 Manufacturer, Mounting Type.
快速对比工具——选择替代料号进行并排对比：
SC900844JVK
✅ 直接替换✓ 有现货
$9.74 / 个
查看数据手册 →SC900844JVKR2
✅ 直接替换✓ 有现货
$9.25 / 个
查看数据手册 →SC900844JVK 规格参数
| Part Number | SC900844JVK |
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| 功能 | Power Management IC (PMUIC) - Integrated PMIC for Ultra-Mobile and Embedded Applications |
| 拓扑 | PMUIC: 5 switching regulators + 14 LDOs + 10 buck converters + ADC |
| 输入电压范围 | 3 V to 4.4 V |
| Package Type | 338-ball MAP-BGA (11x11 mm) |
| Pin / Terminal Count | 338 |
| Package Code | TFBGA |
| Package Shape | Square |
| 安装类型 | Surface Mount (SMT) |
| Temperature Grade | Industrial |
| Number of Switches | 5 |
| Number of LDOs | 14 |
| Number of Buck Converters | 10 |
| ADC Integration | Yes - multi-channel monitoring ADC |
| Primary Application | Ultra-Mobile and Embedded Platforms (PCs, PDAs, tablets) |
| RoHS 状态 | Compliant |
| Datasheet Document | Manufacturer datasheet (118 pages per alldatasheet index) |
SC900844JVK square 引脚配置指南
SC900844JVK（square 封装）的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据： SC900844JVK.
请参阅 数据手册 以查看完整引脚配置。
典型应用
SC900844JVK 适用于 6 应用s: Ultra-Mobile Tablet PC Power Tree, Embedded Single-Board Computer (SBC), Smartphone Companion / Peripheral PMIC, PDA / Handheld Data Terminal, Industrial IoT Gateway, Portable Medical Diagnostic Device.
Ultra-Mobile Tablet PC Power Tree
The SC900844JVK is engineered to power complete ultra-mobile tablet PC platforms from a single-cell Li-ion source. Its 3V to 4.4V input range directly accepts battery voltage, while the integrated 5 switching regulators + 14 LDOs + 10 buck converters provide sequenced multi-rail power for the application processor, memory, display, and wireless subsystems. The monitoring ADC enables software-driven DVFS (dynamic voltage and frequency scaling), critical for extending battery life during standby and active load swings typical of tablet usage. Designers pair the PMIC with the host SoC's power management firmware to coordinate sleep states and wake-up sequencing.
推荐
Embedded Single-Board Computer (SBC)
Industrial and commercial embedded SBCs based on Freescale/NXP i.MX SoCs benefit from the SC900844JVK's high regulator integration. A single chip replaces dozens of discrete regulators, shrinking PCB area by 60-70% compared to discrete power designs. The 14 LDOs supply low-noise analog rails for industrial ADC and sensor interfaces, while 10 buck converters handle core processor and DDR power with high efficiency. The industrial temperature grade supports deployment in factory automation, digital signage, and kiosk systems. The 338-ball MAP-BGA package requires a 4-layer or 6-layer PCB with controlled-impedance routing for switching node placement.
推荐
Smartphone Companion / Peripheral PMIC
When used as a companion PMIC alongside an application SoC, the SC900844JVK handles secondary subsystems such as wireless radios, audio codecs, sensors, and battery charging. The 5 switching regulators efficiently power radio PA and Wi-Fi/Bluetooth transceivers, while 14 LDOs provide clean rails for analog audio and sensor signal conditioning. The integrated ADC monitors each rail's voltage and current, allowing the host OS to profile power consumption in real time and optimize thermal performance.
推荐
PDA / Handheld Data Terminal
Traditional PDA and barcode-scanner data terminals rely on the SC900844JVK's PMUIC architecture to manage multi-rail power within tight PCB constraints. Industrial handheld designs typically integrate a 3.5"-5" LCD, scanner engine, Wi-Fi radio, and touch controller - all of which require dedicated power rails. The integrated 29 power outputs plus ADC monitoring reduce external components to a few bulk capacitors and inductors. The 3V to 4.4V input range matches single-cell Li-ion battery operation directly without boost pre-regulation.
推荐
Industrial IoT Gateway
Industrial IoT gateways aggregate sensor data from factory-floor equipment, often in space-constrained DIN-rail or panel-mount enclosures. The SC900844JVK's compact 11x11 mm MAP-BGA footprint and high integration suit the dense PCB layouts typical of IoT gateways. Buck converters power the gateway SoC and Ethernet PHYs efficiently from a 3.3V system rail; LDOs provide low-noise rails for analog sensor interfaces and isolated communication ports. The industrial temperature grade supports operation across 0C to +85C ambient ranges common in industrial enclosures.
推荐
Portable Medical Diagnostic Device
Portable medical devices such as glucose meters, pulse oximeters, and handheld ultrasound probes benefit from the SC900844JVK's multi-rail power architecture. The 5 switching regulators efficiently power digital subsystems, and 14 LDOs provide ultra-low-noise analog rails for sensor signal conditioning and ADC reference voltages. The integrated ADC channel monitors battery state and rail health, supporting reliable patient data acquisition. Although the part is industrial (not medical/AEC-Q100) grade, its high integration makes it suitable for non-life-critical portable medical devices where space and battery life dominate design priorities.
推荐
推荐产品汇总
工程参考数据： SC900844JVK ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | SC900844JVKR2 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Package | 338-MAP-BGA (11x11) | 338-MAP-BGA (11x11) - same |
| Input Voltage Range | 3 V to 4.4 V | 3 V to 4.4 V |
| Switching Regulators | 5 | 5 |
| LDO Count | 14 | 14 |
| Buck Converters | 10 | 10 |
| Integrated ADC | Yes | Yes |
| Temperature Grade | Industrial | Industrial |
| Mounting Type | Surface Mount | Surface Mount |
关键差异点
- Single-chip ultra-mobile PMIC with 29 power outputs （对比 Discrete multi-regulator designs)
- Single-cell Li-ion input range (3V to 4.4V) （对比 Wider-input discrete regulators)
- Integrated monitoring ADC for rail telemetry （对比 PMICs without ADC integration)
设计说明
The 338-ball MAP-BGA package requires via-in-pad technology with laser-drilled microvias on a 4-layer or 6-layer PCB stackup. Standard 1.0 mm ball pitch demands precise solder paste deposition via stencil apertures of 0.4 mm. Designers should follow the manufacturer reference layout exactly, including the thermal via array under the die and the keep-out zone around switching regulator balls to prevent ground-bounce coupling.
Place input bulk capacitance (typically 22 uF X5R ceramic + 100 uF polymer) within 5 mm of the input power balls. Each switching regulator output requires its own 22 uF ceramic capacitor placed within 2 mm of the SW node. Per manufacturer datasheet, LDO inputs must be fed from a pre-regulated buck output, not directly from the battery, to avoid thermal stress on the LDO pass transistors at high VIN-VOUT differentials.
Estimated: with all 29 regulators active and 500 mA total load, internal dissipation reaches approximately 1.5 W. With theta_JA around 25 C/W for the 11x11 mm MAP-BGA on a 4-layer PCB with thermal vias, junction temperature rises about 38 C above ambient - within industrial limits but requiring a minimum 100 mm^2 top-side copper pour and thermal via array for sustained reliability.
Do not exceed the 4.4 V maximum input voltage - even brief transients above 5 V can damage internal FETs. Add a TVS diode or transzorb on the input rail for surge protection. Also avoid back-driving the LDO outputs, as the integrated ADC and sequencing logic may latch into an indeterminate state. Always follow the manufacturer's power-up sequence: input voltage applied first, then EN, then regulator outputs ramp in programmed order.
合规信息
RoHS compliant per NXP/Freescale product line. Industrial temperature grade, not AEC-Q100 qualified. Halogen-free status not explicitly stated in the Verified Web Data.
