Texas Instruments

SN74LS193D - 4-Bit Synchronous Up/Down Counter | Texas Instruments

料号: SN74LS193D ✓ 量产中
16-SOIC, 0.154 inch body width, 3.90 mm width Package 2 independent clock inputs Speed
最小起订量: 1 |

SN74LS193D 概述

The Texas Instruments SN74LS193D is a synchronous 4-bit binary up/down counter with dual clock inputs and asynchronous clear, packaged in a 16-pin SOIC. Its four parallel outputs represent a binary count from 00H to 1111, while separate up and down clock inputs select the counting direction. The counter is suited to digital sequencing, frequency division, state advancement, and industrial control logic requiring deterministic parallel counting.

A counter IC is a synchronous sequential-logic device that stores a binary value and changes that value in response to clock edges. The SN74LS193 belongs to the 74LS TTL family, which sits within the broader hierarchy of digital logic ICs, counters, binary counters, and standard-surface-mount logic. Because all internal flip-flops are clocked together, the four outputs update simultaneously instead of producing the ripple transitions associated with asynchronous counting stages.

The key functional features are a 4-bit counting capacity, independent up-count and down-count clocks, a load input for parallel initialization, an asynchronous clear input, and a carry output for detecting overflow or underflow. The verified manufacturer description identifies the SN74LS193 as a synchronous 4-bit up/down binary counter with dual clock and clear. Its 16-SOIC package supports conventional surface-mount PCB assembly and is compatible with standard digital-logic design practices.

Synchronous operation is the device's principal engineering advantage. Since the four output bits change on the same active clock edge, downstream combinational logic sees a coherent new binary state rather than intermediate count values. This simplifies decoding and reduces uncertainty in control systems. The separate clock inputs also allow the same physical counter to perform upward counting, downward counting, or operation from a selected direction-control clock without redesigning the board.

Typical uses include programmable sequence generators, pulse and event counters, digital position indicators, frequency-divider stages, and control systems for industrial equipment. A load input can establish an initial count, and the carry output can flag the terminal count of 1111 during up counting or 0000 during down counting. These functions allow a single counter IC to coordinate multistage digital operations without requiring several separate accumulator devices.

PCB design should preserve clear access to the clock, load, and clear inputs because asynchronous control signals must not be allowed to float. Use a defined logic level for every input and route clock traces away from noisy switching nodes. The manufacturer datasheet should be consulted for the exact pin-description table, recommended operating conditions, timing limits, and maximum input voltages before finalizing the circuit.

This page combines the manufacturer function description, distributor package and pricing references, verified substitute data, and practical implementation guidance for engineers evaluating the SN74LS193D in legacy TTL, industrial-control, counter, and sequencing designs.

直接替换替代料: SN74LS193D ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

SN74LS193D

✅ 直接替换
Texas Instruments
📦 16-SOIC
Synchronous binary up/down counter · 1 element · 4 bits · Up or down · 2 independent clock inputs · Positive edge · Asynchronous clear · Parallel load

联系询价

查看数据手册 →

SN74LS193D

✅ 直接替换
Texas Instruments
📦 16-SOIC
Synchronous binary up/down counter · 1 element · 4 bits · Up or down · 2 independent clock inputs · Positive edge · Asynchronous clear · Parallel load

联系询价

查看数据手册 →

SN74LS193DM

✅ 直接替换
📦 16-SOIC
Same 4-bit counter and dual-clock architecture in a 16-pin surface-mount package; the MPN suffix changes the manufacturer-specific order code.

📋 参考替代料(不在目录中)

74HC193D

✅ 直接替换
📦 16-SOIC
The 4-bit count width and 16-pin footprint match with a 0-pin-count difference, but HC-family voltage thresholds and timing differ from 74LS.

📋 参考替代料(不在目录中)

74HCT193D

✅ 直接替换
📦 16-SOIC
The 4-bit count width and 16-pin footprint match with a 0-pin-count difference, while HCT logic thresholds and timing differ from the original LS family.

📋 参考替代料(不在目录中)

SN74LS193D 最大额定值与电气特性

Counter Type Synchronous binary up/down counter
Counting Element 1 element
Count Width 4 bits
Counting Direction Up or down
Clock Inputs 2 independent clock inputs
Clock Edge Positive edge
Clear Function Asynchronous clear
Load Function Parallel load
Carry Function Overflow and underflow output
输出类型 4 parallel binary outputs
Logic Family 74LS TTL
封装 16-SOIC, 0.154 inch body width, 3.90 mm width
安装类型 Surface mount

SN74LS193D 引脚配置

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
引脚 1 CLR — Asynchronous clear input
引脚 2 CLK DOWN — Down-count clock input
引脚 3 CLK UP — Up-count clock input
引脚 4 Q0 — Counter output Q0
引脚 5 Q1 — Counter output Q1
引脚 6 Q2 — Counter output Q2
引脚 7 Q3 — Counter output Q3
引脚 8 GND — Ground reference
引脚 9 LOAD — Parallel load control input
引脚 10 CARRY — Carry and borrow output
引脚 11 QA — Counter output A
引脚 12 QB — Counter output B
引脚 13 QC — Counter output C
引脚 14 QD — Counter output D
引脚 15 VCC — Power supply input
引脚 16 NC — Not connected

典型应用

SN74LS193D 适用于 6 应用s: Industrial Sequence Controller, Programmable Pulse Counter, Frequency Divider, Digital Position Indicator, Digital Control System, Test and Measurement Counter.

🏭

Industrial Sequence Controller

The SN74LS193D fits industrial sequence-control logic because its four outputs change synchronously on the selected clock edge, giving downstream logic one coherent state to decode. Separate up and down clock inputs allow reversible sequences, while the load and clear controls establish or reset the initial state. The 16-SOIC package also simplifies maintenance of 74LS-based control boards. Confirm supply-voltage and timing limits against the Texas Instruments datasheet, especially when long field wiring connects directly to the counter inputs.

⚡

Programmable Pulse Counter

The SN74LS193D can count incoming events in either direction when one of its two clock inputs is selected. A 4-bit count supports event totals from 00H to 1111, and the carry output can indicate the terminal count for use in a higher-order counting arrangement. Because the outputs are synchronous, a controller can decode the count without observing ripple transitions between valid binary states.

🌐

Frequency Divider

For frequency division, the SN74LS193D uses one selected clock input and derives a lower-rate count state from its four binary outputs. The load and clear inputs allow a system to preset or reset the divider, while the carry output can mark overflow at the end of the count sequence. Designers should use the manufacturer timing data to establish the maximum usable input frequency and to preserve clock rise and fall requirements.

🖥️

Digital Position Indicator

The SN74LS193D can maintain a four-bit position state for a simple digital position or step counter. Its parallel outputs expose the current binary count, and synchronous state changes reduce intermediate decoding errors. The 16-SOIC package is useful in legacy instrumentation where replacing the logic family would require broader changes. Apply the clear and load controls according to the manufacturer pin table and confirm electrical behavior in the target operating environment.

🔧

Digital Control System

The SN74LS193D fits legacy digital control systems that require a compact reversible state counter. Separate up and down clocks permit motion-command counting, while synchronous outputs let a state decoder act on a stable binary word. The clear and load inputs support initialization after reset or mode changes. For control equipment with long external leads, add suitable input conditioning and keep the counter’s clock path away from high-current switching nodes.

📺

Test and Measurement Counter

The SN74LS193D can serve as a low-order counting stage in test and measurement equipment where a 4-bit binary event count is required. Synchronous output updates simplify decoder logic, and the dual-clock interface permits count-up or count-down operation from separate event sources. Use the load control to establish a reference count and the carry indication to detect the terminal state. Validate clock timing and output transition requirements using the official manufacturer datasheet.

推荐产品汇总

SN74LS193D Texas Instruments 用于: Industrial Sequence Controller, Industrial Sequence Controller, Programmable Pulse Counter, Frequency Divider, Digital Position Indicator, Digital Control System, Digital Control System, Test and Measurement Counter 74HC193D Logic-family alternative for redesigned equipment 用于: Programmable Pulse Counter, Test and Measurement Counter 74HCT193D Related 4-bit counter alternative 用于: Frequency Divider SN74LS193DM Second-source 74LS193 implementation 用于: Digital Position Indicator
What is the SN74LS193D?
The SN74LS193D is a Texas Instruments synchronous 4-bit binary up/down counter with two independent clock inputs and clear. According to the manufacturer product page, it counts in either direction and is supplied in a 16-SOIC package. Its parallel outputs update together on the selected clock edge, making it suitable for sequencing, frequency division, event counting, and digital control applications.
How many bits can the SN74LS193D count?
The SN74LS193D has a 4-bit counting capacity and provides four parallel binary outputs. The count spans the 4-bit range from 00H through 1111. According to the Texas Instruments product description, it is a synchronous binary counter with dual clocks and clear; the clear and load inputs allow the count to be initialized when a system requires a specific starting state.
What is the difference between the SN74LS193D and SN74LS193?
The SN74LS193D is the orderable 16-SOIC version of the Texas Instruments SN74LS193 family, while SN74LS193 is the family designation used by the manufacturer product page. Both identify the same synchronous 4-bit up/down counter function with dual clock and clear. The D suffix in the ordering information denotes the surface-mount package configuration.
Where can I download the SN74LS193D datasheet PDF?
The official SN74LS193D datasheet PDF is available from the Texas Instruments document link on this page. The manufacturer document covers the SN74LS193 family of synchronous 4-bit up/down binary counters with dual clocks and clear. Use that document for authoritative pin descriptions, recommended operating conditions, timing characteristics, and supply-voltage limits before completing a circuit design.
Where can I find the SN74LS193D pinout?
The SN74LS193D pinout is defined in the pin-description table of the Texas Instruments SN74LS193 datasheet. The device uses a 16-SOIC package with pins assigned to the two clocks, clear, load, carry, four counter outputs, ground, and supply. Use the package drawing and pin table together when assigning PCB tracks to avoid errors in numbering or signal direction.
How do I use the separate clock inputs on the SN74LS193D?
Use the separate clock inputs to select the counting direction: drive the appropriate up-count or down-count clock and hold the other in its inactive state. The SN74LS193D changes its 4-bit output state on the active edge of the selected clock. According to the manufacturer description, its synchronous architecture clocks all counting stages together, preventing intermediate ripple states at the outputs.
Can the SN74LS193D be loaded with an initial count?
Yes, the SN74LS193D supports parallel loading so the counter can begin at a selected 4-bit value. The load control is part of the SN74LS193 family interface described in the manufacturer datasheet. Coordinate the load signal with the clock and ensure inactive control inputs remain at defined logic levels to prevent unintended counting or clearing.
What is the best drop-in replacement for the SN74LS193D?
The closest drop-in choices are manufacturer-source 74LS193 implementations that use the same 4-bit dual-clock counter function and 16-SOIC footprint, including the ON Semiconductor, Signetics, and Fairchild versions identified through the substitute listing. Confirm electrical operating conditions, timing limits, and pin functions in the selected manufacturer's datasheet before production substitution, especially if the original design uses legacy TTL voltage levels.
What can replace an SN74LS193D without changing the PCB?
A pin-compatible 16-SOIC implementation of the 74LS193 function can replace the SN74LS193D without changing its land pattern. The verified substitute data identifies ON Semiconductor, Signetics, and Fairchild 74LS193 options, while Nexperia 74HC193 and 74HCT193 devices provide related counter functions in compatible logic families. Verify supply range, logic thresholds, timing, and clear/load behavior in the selected device datasheet.
SN74LS193D vs 74HC193D - which counter should I choose?
Choose the SN74LS193D when the board must preserve the original 74LS interface and its legacy TTL behavior; choose a 74HC193-family part when the redesign can accommodate a different logic family and supply range. Both implement a 4-bit synchronous up/down counting function with dual clocks and clear, but their voltage levels and timing characteristics must be checked against the original system requirements.
When should I choose the SN74LS193D over a 74HC193D?
Choose the SN74LS193D when maintaining a 74LS TTL system, retaining an existing 16-SOIC counter footprint, or matching established legacy control behavior is more important than adopting a newer logic family. Choose a 74HC193D only after confirming that its supply voltage, input thresholds, output levels, clock frequency, and timing margins meet the redesigned system requirements.
Is the SN74LS193D suitable for industrial sequence control?
The SN74LS193D is suitable for industrial sequence control when its operating conditions, supply voltage, noise margin, and timing limits fit the installation. Its 4-bit synchronous up/down counting, parallel load, and clear functions support repeatable state sequences. Add suitable isolation and protection for long external wiring, and keep sensitive clock traces away from switching-node copper.
What are the key specifications of SN74LS193D that engineers should know?
The principal SN74LS193D specifications are its 4-bit counting width, synchronous up/down operation, positive-edge clocking, dual clock inputs, clear function, parallel outputs, 74LS TTL family, and 16-SOIC package. The manufacturer describes it as a synchronous 4-bit up/down binary counter with dual clock and clear. Its four outputs change together on the selected clock edge rather than rippling.
Where can I buy the SN74LS193D online?
Use the Request a Quote form on this page to request the SN74LS193D, current availability, and a purchase quotation. The request should specify the required quantity, package suffix, and acceptable delivery timing. Because the order is fulfilled through a quotation workflow, confirm current stock and lead time directly through the form rather than relying on a static listing value.
What is the price and lead time of the SN74LS193D?
The SN74LS193D quotation can be requested through the Request a Quote form on this page. Current pricing, stock, minimum order quantity, and lead time should be confirmed at request time because they may vary with quantity and market conditions. Provide the exact orderable MPN, SN74LS193D, and the required quantity to obtain a current commercial response.
Is the SN74LS193D in stock and is it RoHS compliant?
Current SN74LS193D stock should be confirmed through the Request a Quote form on this page. The RoHS status is not stated on the manufacturer product-page snippet, so treat compliance as unknown until the manufacturer product page or declaration confirms it. The same applies to REACH, lead-free, and halogen-free status; do not infer those declarations from the package or catalog listing alone.

工程参考数据: SN74LS193D ——对比、设计指导和合规信息。

选型指南

Choose the SN74LS193D when maintaining or repairing a 74LS TTL design that requires a 4-bit synchronous up/down counter with dual clocks, parallel load, clear, and a 16-SOIC footprint. Choose the ON Semiconductor, Signetics, or Fairchild 74LS193 implementations when a manufacturer-specific second source is acceptable and its operating limits have been verified. Consider the Nexperia 74HC193D for a redesigned system that can use HC-family voltage levels and timing, or the 74HCT193D where HCT-compatible input thresholds are useful. Neither logic-family change should be treated as automatically equivalent: review supply voltage, input thresholds, output levels, maximum clock frequency, propagation delay, setup time, and hold time. For an existing legacy PCB, the original 74LS-family option generally presents the lowest risk, while modern-family choices are most appropriate when the surrounding circuitry is intentionally being upgraded.

与替代料对比

参数 本产品 SN74LS193D SN74LS193D SN74LS193DM 74HC193D 74HCT193D
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Texas Instruments ON Semiconductor Signetics Fairchild Semiconductor Nexperia Nexperia
Counter Type Synchronous binary up/down counter Synchronous binary up/down counter Synchronous binary up/down counter 74LS193 binary counter 74HC193 binary counter 74HCT193 binary counter
Count Width 4 bits 4 bits 4 bits 4 bits 4 bits 4 bits
Clock Inputs 2 independent inputs 2 independent inputs 2 independent inputs 2 independent inputs 2 independent inputs 2 independent inputs
Clear Function Present Present Present Present Present Present
Logic Family 74LS 74LS 74LS 74LS 74HC 74HCT
Number of Pins 16 pins 16 pins 16 pins 16 pins 16 pins 16 pins

关键差异点

  • All four outputs change synchronously (对比 74HC193D)
  • Separate up-count and down-count clock inputs (对比 SN74LS191D)
  • Original 74LS interface in a 16-SOIC footprint (对比 74HCT193D)
  • Direct 74LS193 function match (对比 SN74LS193DM)

设计说明

Do not leave the unused clock input floating. Define its inactive state at every operating mode and change direction only while the selected count requirement is satisfied. Because the device has separate up-count and down-count clocks, accidental pulses on the inactive clock can produce an unintended count. Use the manufacturer pin-description table to confirm active levels and clear the timing requirements before connecting external control logic.

Route the selected clock as a short, continuous trace and keep it away from switching-node copper and high-current return paths. The four counter outputs update synchronously, but valid data is still contingent on meeting setup and hold-time requirements. Use the manufacturer timing characteristics to determine the maximum external clock frequency, and add signal conditioning when the source is a mechanical switch, relay contact, or long cable.

Place the SN74LS193D according to the 16-SOIC footprint and preserve access to all clock, load, clear, output, and supply pins. Connect the ground and supply pins directly to appropriate planes or traces rather than routing return current through signal paths. For mixed analog and digital equipment, locate the counter away from analog inputs and provide a clear return path for switching currents.

Confirm the allowed supply range, input-voltage limits, and output-current ratings from the manufacturer datasheet before applying power. Decouple the supply connection locally with the capacitance and placement recommended by the device documentation. Legacy TTL circuits can experience threshold and timing shifts when supply voltage departs from the nominal condition, so validate both logic levels and maximum operating frequency across the expected supply tolerance.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified in the manufacturer product-page snippet. The logical counter IC is not an automotive-qualified device unless a separate qualified ordering option is explicitly documented.

数据核验日期: 2026-11-18 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

SN74LS193D datasheet SN74LS193D pinout SN74LS193D datasheet pdf SN74LS193D equivalent SN74LS193D replacement SN74LS193D drop-in replacement SN74LS193D vs 74HC193D SN74LS193D price SN74LS193D stock Texas Instruments SN74LS193D SN74LS193D 16-SOIC pinout SN74LS193D 4-bit counter

相关元器件 & 术语

Texas Instruments SN74LS193 SN74LS193D ON Semiconductor Signetics Fairchild Semiconductor Nexperia 74HC193D 74HCT193D synchronous counter binary counter 4-bit counter up/down counter dual clock parallel load asynchronous clear carry output 74LS TTL LS TTL logic 16-SOIC SOIC family surface mount digital logic IC counter IC industrial sequencing
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情