Texas Instruments

SN74LS393D - Dual 4-Bit Binary Counter | Texas Instruments

料号: SN74LS393D ✓ 量产中
14-pin SOIC Package Negative edge Speed
最小起订量: 1 |

SN74LS393D 概述

The Texas Instruments SN74LS393D is a dual 4-bit binary counter containing two independent high-speed 4-stage ripple counters in a 14-pin SOIC package. Each counter provides a modulo-16 count, parallel outputs for every stage, negative-edge clock triggering, and a direct clear input, allowing one IC to implement two synchronous timing or event-counting channels.

A binary counter is a sequential logic component that records the number of clock transitions applied to its clock input. The SN74LS393 belongs to the broader hierarchy of counter ICs, digital logic ICs, and TTL-compatible semiconductors. Its four parallel output bits provide simultaneous access to divide-by-2, divide-by-4, divide-by-8, and divide-by-16 timing signals, while two counters in one package conserve board area in digital control, instrumentation, and industrial timing systems.

The key features of the SN74LS393D include two independently clocked 4-bit binary counters, direct parallel clear, and parallel counter-stage outputs. Each half uses master-slave flip-flop stages, with the last three stages operating in a ripple sequence. This architecture is appropriate when predictable count-state visibility is more important than synchronous carry propagation. The manufacturer identifies the device as a 2-element, 4-bit, negative-edge binary counter in a 14-pin SOIC package.

The SN74LS393D is part of the 74LS TTL logic family and is suited to systems using 5 V-compatible digital interfaces. Because the counters include parallel outputs from each stage, a single output can be selected as the required submultiple of the input frequency. Cascading two internal counters also provides a total divide-by-256 capability when the external connection and counting sequence are designed according to the manufacturer documentation. The clear inputs allow the counting state to be reset during initialization or controlled system events.

Typical applications include digital time-base generation, event and pulse counting, frequency division, programmable timing modules, industrial control interfaces, and test equipment. In each case, the two counters can operate independently on separate clock inputs or be cascaded when a longer count sequence is required. The parallel outputs make the device useful in systems requiring multiple derived timing signals rather than only a serial carry or terminal-count indication.

When laying out the circuit, route the clock input away from output-return paths and use a ground reference that follows the device pin assignments in the manufacturer datasheet. Keep output loads within the specified fan-out and avoid treating ripple transitions as simultaneous events. For a new board, verify that the 14-pin SOIC footprint, pin-one orientation, supply voltage, and operating limits match the intended TTL logic environment before assembly.

This page consolidates the device function, verified distributor references, source-backed specifications, drop-in sourcing information, and practical design considerations. It also distinguishes documented electrical attributes from parameters that require confirmation in the full manufacturer datasheet, helping engineers shorten component selection and PCB implementation time.

直接替换替代料: SN74LS393D ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

SN74LS393D

✅ 直接替换
Texas Instruments
📦 14-pin SOIC
Binary ripple counter · 2 counters · 4 bits · Modulo-16 binary · Negative edge · 2 independent clock inputs · 2 direct clear inputs · 4 parallel outputs per counter

联系询价

查看数据手册 →

SN74LS393D 最大额定值与电气特性

Counter Type Binary ripple counter
Number of Counters 2 counters
Bits per Counter 4 bits
Counting Sequence Modulo-16 binary
Clock Edge Negative edge
Clock Inputs 2 independent clock inputs
Clear Inputs 2 direct clear inputs
输出配置 4 parallel outputs per counter
Internal Flip-Flops 8 master-slave flip-flops
Cascade Divide Ratio Divide-by-256
Logic Family 74LS TTL
封装 14-pin SOIC
安装类型 Surface mount

SN74LS393D 14-pin soic 引脚配置指南

SN74LS393D(14-pin soic 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

SN74LS393D 的 14-pin soic 封装引脚图

暂无详细引脚数据: SN74LS393D.

请参阅 数据手册 以查看完整引脚配置。

典型应用

SN74LS393D 适用于 6 应用s: Digital Frequency Divider, Event and Pulse Counter, Programmable Time-Base Generator, Industrial Sequence Controller, Test and Measurement Instrumentation, Digital Clock and Watch Circuit.

⚡

Digital Frequency Divider

The SN74LS393D fits frequency-divider designs because each 4-bit counter exposes parallel outputs for divide-by-2, divide-by-4, divide-by-8, and divide-by-16 ratios. A designer can route the input pulse train to a clock pin and select the required stage as a stable timing reference without adding a binary decoder. The two internal counters allow two divisions to be generated independently, while the negative-edge trigger gives the circuit a defined count transition. Because the stages ripple, output changes are sequential rather than perfectly simultaneous, so the selected output must be used in a way that tolerates normal counter propagation delay.

🏭

Event and Pulse Counter

The SN74LS393D can count external events by applying each event as a clock transition to one of its two clock inputs. Its 4-bit parallel outputs make the current event count directly available to control logic, while the direct clear input allows the count to be reset after a measurement interval. Using both halves provides two independent measurement channels for line-cycle, motion, or production-event monitoring. The design must account for the negative-edge counting behavior, contact or signal conditioning at the input, and the sequential propagation between internal ripple stages when determining how quickly a decoded count may be sampled.

🖥️

Programmable Time-Base Generator

The SN74LS393D supports time-base generation by counting a periodic reference clock and selecting one of four parallel stage outputs as the derived timing signal. Two counters in the same 14-pin SOIC can produce separate base intervals or can be cascaded when a larger division is needed. The divide-by-256 capability described for the counter family is useful for slow system-timing or sequencing functions. Choose the output ratio and cascade arrangement so that ripple-stage timing remains acceptable, and provide suitable clock conditioning if the reference source can have irregular edges or excessive noise.

⚙️

Industrial Sequence Controller

The SN74LS393D can serve as a compact state-counting element in an industrial sequence controller because each half supplies four visible count states and an independent clear input. The counter output can represent a timing interval, while additional logic determines which transition advances or resets the sequence. Two counters can monitor two stages of a machine cycle without requiring separate packages. For robust industrial use, verify the device's specified supply and temperature limits, provide clean clock signals, and avoid treating simultaneously changing ripple outputs as a single zero-delay event.

📡

Test and Measurement Instrumentation

The SN74LS393D is useful in test and measurement equipment for generating selectable divided clock signals or counting repetitions of a test stimulus. Four parallel outputs from each counter provide several time-base ratios for a single input, helping reduce the number of external timing dividers required. The dual-counter organization also permits one channel to count while the other generates a related reference. Instrumentation designs should evaluate output rise and fall behavior, load capacitance, and clock jitter at the selected division ratio, since a logic divider does not improve the timing quality of its input reference.

🕰️

Digital Clock and Watch Circuit

The SN74LS393D can implement count and divide functions in a low-speed digital clock or interval timer because its four parallel outputs correspond to successive binary divisions of the input clock. One half may establish a repetitive timing interval while the other counts completed intervals for a display or control stage. The direct clear function permits initialization when timing begins. Designers should ensure that the input clock meets the device's transition and frequency requirements, and should avoid using ripple outputs without accounting for propagation delay when several bits change close together.

What is the SN74LS393D?
The SN74LS393D is a Texas Instruments dual 4-bit binary counter with two independent modulo-16 ripple counters in a 14-pin SOIC package. According to the Texas Instruments product documentation, the device contains eight master-slave flip-flops, provides parallel outputs from every counting stage, and includes a separate direct-clear input for each counter. It is intended for frequency division, event counting, timing generation, and other digital logic applications that can use the individual divide-by-2, divide-by-4, divide-by-8, and divide-by-16 outputs.
How many counters and outputs does the SN74LS393D contain?
The SN74LS393D contains two independent 4-bit counters, giving each half four parallel binary outputs. According to Texas Instruments documentation, the device uses eight master-slave flip-flops in total, with four flip-flops assigned to each counter. The parallel outputs make intermediate count states directly available, so a circuit can use the divide-by-2, divide-by-4, divide-by-8, or divide-by-16 output without adding separate binary decoder logic.
Is the SN74LS393D clocked on the rising or falling edge?
The SN74LS393D counts on the negative, or falling, edge of each clock input. The distributor product listing identifies the part as a negative-edge, 2-element, 4-bit binary counter, while the Texas Instruments documentation describes master-slave counter stages. Designers should therefore transition the clock low before the active falling edge and account for propagation delay through the ripple stages when several output bits are sampled simultaneously.
Where can I download the SN74LS393D datasheet PDF?
The official Texas Instruments datasheet can be accessed through the manufacturer link on this page, while a manufacturer-part landing page is also available for ordering and support information. The datasheet is the controlling document for pin assignments, recommended operating conditions, electrical characteristics, and application details. Use the Texas Instruments PDF for design sign-off, especially when the counter outputs drive another TTL input or when supply-voltage and temperature limits must be confirmed.
Where can I find the SN74LS393D pinout and pin-one orientation?
The SN74LS393D pinout is shown in the Texas Instruments SN74LS393 datasheet, which covers the 14-pin SOIC connection diagram and functional descriptions. The package has 14 pins and must be oriented according to the manufacturer drawing rather than by visually guessing from a board layout. When assigning PCB tracks, check the pin-one marker, supply and ground locations, both clock inputs, both clear inputs, and all eight parallel count outputs before fabrication.
Can the two counters in the SN74LS393D operate independently?
Yes, the two counters in the SN74LS393D can operate independently because each half has its own clock input, clear input, and four parallel outputs. According to the Texas Instruments product description, the package implements two individual 4-bit counters. Independent operation is useful for two separate event counters or timing channels; cascade interconnection is also possible when the application requires a combined count sequence.
What is the difference between binary and decade counting with the SN74LS393D?
Each SN74LS393D counter operates as a modulo-16 binary counter, meaning its four outputs represent count states from 0 through 15. A decade counter instead terminates after count state 9 and requires different internal decoding. The Texas Instruments SN74LS393 family documentation groups the LS393 with binary and decade counter products, but the SN74LS393D itself is specifically identified as a dual 4-bit binary counter.
When should I choose the SN74LS393D instead of a general-purpose counter IC?
Choose the SN74LS393D when the design needs two independent 4-bit modulo-16 counters, parallel access to several count stages, and direct clear control in a standard 14-pin SOIC footprint. It is especially effective in 74LS-compatible digital systems where intermediate frequency divisions must be available simultaneously. A general-purpose programmable counter may offer a wider modulus or interface, but the SN74LS393D provides a simpler fixed binary counter with direct logic outputs.
What is the best drop-in replacement for the SN74LS393D?
The closest documented drop-in sourcing option is the onsemi-manufactured SN74LS393D in the same 14-pin SOIC format. The distributor listing identifies it as a 2-element, 4-bit, negative-edge binary counter, matching the defining architecture of the Texas Instruments device. Before replacing the original part, verify pin assignments, supply limits, timing characteristics, and clear-input behavior against the full manufacturer datasheet; the on-page Request a Quote form can be used to check current sourcing.
Are SN74LS393D and onsemi SN74LS393D the same counter?
The Texas Instruments and onsemi SN74LS393D entries describe the same functional device class: a dual 4-bit negative-edge binary counter in a 14-pin SOIC package. They are separate manufacturer offerings, so formal qualification should still compare timing, electrical limits, lifecycle status, and marking requirements. For a direct PCB substitution, use the manufacturer pinout and datasheet to confirm that the footprint and every signal function agree.
SN74LS393D versus a synchronous counter: which is better for timing?
The SN74LS393D is better when simple frequency division and direct access to multiple count stages are more important than simultaneous, low-skew counting transitions. Its ripple architecture uses master-slave stages and exposes each stage through a parallel output, making it useful for frequency division and general event counting. A synchronous counter is preferable when all outputs must change predictably on a shared clock edge or when carry timing is critical.
How should ripple-counter outputs be interpreted in a design?
The SN74LS393D outputs change through successive ripple stages, so their transition times are not simultaneous. According to Texas Instruments documentation, the final three stages of each half are triggered in a ripple fashion. Use only an output whose timing requirement is compatible with the propagation delay, and avoid sampling several changing outputs without accounting for skew. This consideration is especially important when the counter output feeds control logic rather than a simple frequency divider.
How do the clear inputs affect the SN74LS393D count state?
Each SN74LS393D counter has a dedicated clear input that resets its four-bit count state for initialization or system control. According to the Texas Instruments product documentation, the two counters provide separate clear functions alongside their separate clock inputs. In a practical circuit, ensure that clear timing meets the device requirements and that the input is not driven in a way that creates unwanted clock or output transitions during normal operation.
Where can I buy SN74LS393D online and check current stock?
Use the Request a Quote form on this page to request current SN74LS393D availability, volume pricing, and lead time from XAIPART. The form is the appropriate route for a quote-based transaction and avoids static pricing or stock claims that can become outdated. Confirm the exact 14-pin SOIC ordering suffix, manufacturer preference, and required quantity when submitting the request.
What is the lead time for SN74LS393D?
The current SN74LS393D lead time depends on manufacturer inventory, order quantity, and the selected 14-pin SOIC variant. Request a current quotation through the Request a Quote form on this page and state the required quantity, delivery location, and target schedule. For production planning, include this counter in the purchasing forecast early because dual counters may be consolidated with other 74LS-family logic rather than stocked as isolated high-volume items.
What are the key specifications of SN74LS393D that engineers should know?
The SN74LS393D is a 14-pin SOIC logic IC containing two independent 4-bit modulo-16 binary counters. Its primary characteristics are negative-edge clocking, four parallel outputs per counter, separate clear inputs, eight master-slave flip-flops, and a divide-by-256 cascade capability. The Texas Instruments product documentation identifies the part as a dual 4-bit binary counter. Supply voltage, maximum frequency, temperature range, and detailed output-current limits should be confirmed in the manufacturer datasheet.
Is SN74LS393D suitable for industrial timing and control systems?
The SN74LS393D is suitable for digital timing and control subsystems when its specified supply voltage, temperature range, and output-loading limits match the equipment. It provides two counters and eight parallel count outputs in one compact 14-pin SOIC, reducing the number of discrete counter packages required. Industrial suitability depends on the qualified temperature grade and operating requirements, so confirm those limits and any applicable system compliance requirements before release.

工程参考数据: SN74LS393D ——对比、设计指导和合规信息。

选型指南

Choose the Texas Instruments SN74LS393D when your design needs two independent 4-bit modulo-16 counters in a 14-pin SOIC and you already standardize on Texas Instruments 74LS-family logic. The parallel outputs are especially useful for generating multiple frequency divisions from one clock, while the separate clear inputs simplify initialization and count reset. The onsemi SN74LS393D is the closest documented alternative when sourcing flexibility or manufacturer continuity is important; confirm its electrical characteristics, lifecycle status, and timing against the original design. Consider a ripple counter only when sequential output transitions are acceptable. If downstream logic must receive all four count bits without skew, add a register or choose a synchronous counter instead. Also avoid assuming that identical package descriptions guarantee drop-in status: the manufacturer pinout, recommended operating conditions, and absolute maximum ratings must be checked before substitution.

与替代料对比

参数 本产品 SN74LS393D
Brand Texas Instruments onsemi
Package 14-pin SOIC 14-pin SOIC - same
Counter Type Binary ripple counter Binary counter
Number of Counters 2 counters 2 counters
Counter Width 4 bits per counter 4 bits per counter
Counting Sequence Modulo-16 binary Modulo-16 binary
Clock Edge Negative edge Negative edge
Output Configuration 4 parallel outputs per counter 4 parallel outputs per counter
Clear Function Separate direct clear for each counter Separate clear for each counter

关键差异点

  • Two counters in one compact package (对比 onsemi SN74LS393D)
  • Parallel access to every binary division stage (对比 onsemi SN74LS393D)
  • Negative-edge counting with dedicated clear inputs (对比 onsemi SN74LS393D)

设计说明

Treat the SN74LS393D as a ripple counter rather than a zero-delay synchronizer. The three final stages of each half change sequentially, so the four parallel outputs can present different transition times. Sample only outputs whose timing relationship is acceptable, or add a holding register when a downstream circuit must receive a coherent binary word. Place clock traces away from output-return paths and maintain a continuous ground reference beneath the device.

Assign the PCB footprint directly from the 14-pin SOIC connection diagram in the Texas Instruments datasheet, including the pin-one marker and device orientation. Reserve every clock, clear, and parallel output route even when the initial design uses only part of the counter. The onsemi drop-in option should not be assumed compatible until its manufacturer pinout and package drawing have been compared against the target footprint.

The counter responds to the negative clock edge, so logic that assumes positive-edge counting will behave differently. Check every signal source, reset controller, and test fixture for the correct transition polarity. Also verify that clear pulses meet the manufacturer's timing requirements and do not accidentally overlap an active clock edge in a way that produces an unintended count transition.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified in the cited product and distributor pages. AEC-Q100 is not applicable to this general-purpose logic IC.

数据核验日期: 2026-11-18 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

sn74ls393 datasheet SN74LS393D datasheet SN74LS393D pinout SN74LS393D datasheet pdf Texas Instruments SN74LS393D SN74LS393D equivalent SN74LS393D replacement SN74LS393D cross reference SN74LS393D 14 pin SOIC SN74LS393D negative edge counter SN74LS393D frequency divider SN74LS393D application circuit

相关元器件 & 术语

Texas Instruments onsemi SN74LS393D SN74LS393 Dual 4-bit binary counter Logic IC TTL logic 74LS family Counter IC Ripple counter Master-slave flip-flop Negative-edge clock Modulo-16 counter Parallel outputs Divide-by-256 Direct clear input 14-pin SOIC SOIC family Surface mount SMD package Frequency divider Event counter Digital timing Industrial control Test instrumentation
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情