SN74LS624N - Dual 20MHz VCO IC | Texas Instruments | 14-PDIP
料号: SN74LS624N ✓ 量产中SN74LS624N 概述
A voltage-controlled oscillator is a frequency-generating circuit whose operating frequency is adjusted by an external control voltage. The SN74LS624N contains two VCO sections, allowing one package to support two related timing functions. This dual-channel architecture can reduce component count in circuits requiring paired modulation, clock synthesis, or fixed-offset frequency generation. Its 14-pin PDIP package also makes it practical for prototyping, educational equipment, repair work, and through-hole industrial assemblies.
According to the Texas Instruments product information, the SN74LS624 is a voltage-controlled oscillator with an operating frequency range identified as 1.1 MHz to 25 MHz in the cited technical summary. The SN74LS624N ordering designation is also described as a 20 MHz VCO in 14-pin PDIP format by distributor product records. These descriptions indicate wide-range frequency generation with externally determined timing and control characteristics.
The SN74LS624 family is associated with improved voltage-to-frequency linearity, a broad frequency range, and compensation features. Each oscillator uses external timing components in combination with voltage-sensitive frequency-control inputs, allowing the circuit designer to establish center frequency and modulation range through component selection and control-voltage design. The control input impedance, recommended external timing network, and recommended decoupling arrangement should follow the manufacturer datasheet when evaluating a specific operating point.
Typical uses include variable-frequency clock generation, tone and alarm generation, modulation circuits, frequency dividers, and phase-locked-loop signal chains. The dual oscillator sections are also useful in test equipment where two related but independently adjustable waveforms are required. Because the output frequency is influenced by component tolerances and control-voltage accuracy, stable external timing components and careful routing of the control signals are important for repeatable results.
Designers should treat the control-voltage path as a sensitive analog signal. Keep the timing components close to the device, minimize loop area around the oscillator nodes, and provide the supply and bypass decoupling specified by the Texas Instruments datasheet. Before substituting the device into an existing circuit, verify the external timing network, control-voltage range, output waveform, and package pin assignments rather than relying only on the oscillator function.
This product page combines the SN74LS624N ordering information, VCO frequency characteristics, package details, practical design guidance, and verified replacement research. It is intended to help engineers identify the correct dual voltage-controlled oscillator, locate the official datasheet, assess stock through a quotation request, and determine whether a documented same-footprint alternative is appropriate for the intended design.
直接替换替代料: SN74LS624N ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
SN74LS624NE4
✅ 直接替换📋 参考替代料(不在目录中)
SN74LS624N 规格参数
| Product Type | Dual voltage-controlled oscillator (VCO) |
| Logic Family | 74LS |
| Number of Oscillator Channels | 2 channels |
| Distributor Maximum Frequency Rating | 20 MHz |
| Technical Summary Frequency Range | 1.1 MHz to 25 MHz |
| 电源电压 | 5 V |
| Output Waveform | Square wave |
| Duty Cycle | 50% |
| Total Input Capacitance | 45 pF |
| Package Type | 14-pin PDIP |
| 安装类型 | Through-hole |
| Pitch | 7.62 mm |
| Body Width | 0.300 inch |
| Operating Voltage | 5 V |
| Control Method | External voltage control |
| Frequency Setting | External capacitor or crystal |
| 输出配置 | Dual oscillator output |
SN74LS624N 14-pin pdip 引脚配置指南
SN74LS624N(14-pin pdip 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: SN74LS624N.
请参阅 数据手册 以查看完整引脚配置。
典型应用
SN74LS624N 适用于 6 应用s: Variable-Frequency Clock Generation, Tone Generation and Alarm Systems, Phase-Locked-Loop Timing, Frequency Modulation and Sweep Control, Instrumentation and Signal Generators, Industrial Control and Legacy Equipment Repair.
Variable-Frequency Clock Generation
The SN74LS624N fits clock-generation designs requiring a square-wave output whose frequency can be varied by a control voltage. Its distributor-listed 20 MHz rating and external timing architecture allow the designer to select a capacitor or crystal network and then modulate the operating point through the control input. The dual VCO configuration can also generate two related clock signals. Confirm the timing-component range and control-voltage limits against the manufacturer characteristic curves, and route the control node away from high-current switching paths to preserve frequency stability.
推荐
Tone Generation and Alarm Systems
The SN74LS624N can generate a variable-frequency square-wave tone for alarms, test tones, and simple audio-style signaling systems. One oscillator channel may provide the tone while the second can provide a related reference or auxiliary frequency, reducing package count compared with two discrete single VCOs. Because the square-wave output is rich in harmonics, filtering may be needed for low-distortion audio. Set the timing network using the TI recommendations and validate frequency tolerance across temperature and the intended control-voltage range.
推荐
Phase-Locked-Loop Timing
The SN74LS624N is suitable for the oscillator element of a phase-locked-loop timing system where an external loop filter and phase comparator establish regulation around the VCO's control voltage. Its two oscillator sections can support a main reference loop and a secondary related frequency path. The manufacturer describes improved voltage-to-frequency linearity, range, and compensation for this oscillator family. Verify loop stability, capture range, and component tolerances in the actual PLL topology rather than relying on the oscillator's standalone frequency range alone.
推荐
Frequency Modulation and Sweep Control
The voltage-controlled input lets the SN74LS624N support frequency sweeps, modulation, and closed-loop tuning when a control system varies its input voltage. A single external timing component establishes the nominal range, while the control voltage moves the oscillator within the range supported by the manufacturer characteristic curves. Keep the modulation source impedance and leakage in view because they directly affect frequency linearity and noise. For precise results, characterize the complete control path and timing-component tolerance across the required environmental range.
推荐
Instrumentation and Signal Generators
The SN74LS624N can serve as the programmable timing source in bench instruments, function generators, and automated test equipment requiring repeatable square-wave outputs. Its dual channels allow one device to provide a stimulus and a related reference signal, while the external timing network supports application-specific frequency selection. A controlled 5 V supply and stable decoupling are important when minimizing frequency jitter. Use the manufacturer's output and control-voltage data to establish rise-time, duty-cycle, and modulation limits.
推荐
Industrial Control and Legacy Equipment Repair
The 14-pin PDIP package and through-hole construction make the SN74LS624N useful for maintaining older industrial control, test, and laboratory equipment that originally used this dual VCO. A legacy repair can retain the original board footprint and signal topology when the replacement has verified electrical and timing compatibility. Confirm the exact suffix, temperature grade, and lifecycle status before procurement. Where no documented same-footprint part is available, avoid installing CD4046 or 74HC4046 devices directly because their pin arrangements and supply requirements differ.
推荐
推荐产品汇总
工程参考数据: SN74LS624N ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | SN74LS624NE4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 14-pin PDIP | 14-pin PDIP |
| Product Type | Dual voltage-controlled oscillator | Dual voltage-controlled oscillator |
| Number of Oscillator Channels | 2 | 2 |
关键差异点
- Two VCO channels in one package (对比 CD4046)
- Established 14-pin PDIP option for legacy through-hole boards (对比 74HC4046)
- Documented same-family ordering option (对比 SN74LS624NE4)
设计说明
Place the external timing components close to their associated SN74LS624N pins and minimize the loop area around each oscillator node. Long PCB traces add parasitic capacitance that can shift the operating frequency and alter control-voltage linearity. Keep the timing network away from switching-node return currents, and follow the physical arrangement in the Texas Instruments datasheet when reproducing the manufacturer's recommended application circuit.
Do not treat CD4046, 74HC4046, NE566, or LM566 devices as direct SN74LS624N replacements. Although they implement related voltage-controlled oscillator functions, the verified material does not establish a shared 14-pin footprint or identical pin map. A new design may use one of those families after a circuit redesign, but an existing PCB should retain the Texas Instruments device unless a documented pin-to-pin cross-reference is available.
Treat the control-voltage connection as a sensitive timing signal rather than a general-purpose logic input. Keep its source impedance low, terminate it according to the oscillator control circuit, and isolate it from noisy switching paths and high-impedance leakage nodes. Recheck center frequency, modulation range, and duty cycle at the intended supply voltage and temperature because timing components and control-network error can move the oscillator away from its nominal point.
Use the supply voltage and decoupling arrangement specified by the manufacturer datasheet, and include adequate bypass capacitance at the device. Supply ripple and ground-return coupling can appear as frequency instability or jitter even when the nominal control voltage is correct. During repair or board conversion, compare the original circuit's grounding and decoupling with the TI recommended application diagram rather than copying a generic oscillator layout.
合规信息
The verified excerpts identify the Texas Instruments SN74LS624 voltage-controlled oscillator family but do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is not applicable because this is a logic and timing IC rather than an automotive-qualified power device.