SN74LS645H - Octal Bus Transceiver | Texas Instruments
料号: SN74LS645H ✓ 量产中SN74LS645H 概述
A bus transceiver is a bidirectional interface IC that combines driver and receiver functions. It allows a device to transmit logic levels onto a bus and receive logic levels from that same bus. The SN74LS645 family reduces the number of external timing requirements by coordinating bus direction and output-enable control, while the three-state outputs permit multiple devices to share common data lines without driving them simultaneously.
The SN74LS645 is one member of the SN54LS and SN74LS low-power Schottky TTL logic families. Low-power Schottky TTL combines bipolar transistor logic with Schottky-clamped input stages. This technology is associated with the 74LS family’s established logic levels, system design heritage, and broad use in legacy digital equipment. The octal organization means that one device handles eight signal lines in parallel rather than requiring eight separate single-bit interface circuits.
The H suffix identifies the orderable SN74LS645H configuration listed for the octal bus transceiver family. The manufacturer product page and supporting technical descriptions identify the device as an octal transceiver for asynchronous two-way bus communication. Detailed electrical limits, propagation timing, supply-current behavior, temperature grade, and package dimensions should be confirmed in the manufacturer datasheet before release to production.
Typical uses include bidirectional processor and peripheral buses, memory-interface buffering, data acquisition systems, test equipment, industrial control logic, and repairs of legacy TTL-based hardware. The device is especially useful where a shared bus requires controllable drive direction and a high-impedance state so that only one participant actively drives the lines during a given transaction.
Designers should verify direction and enable truth tables, propagation delay, setup and hold timing, input and output loading, and the available input-to-output voltage margin in the system. A shared bus also requires a defined arbitration method so that no two drivers enable the same line simultaneously. Decoupling and signal-return paths should follow the recommended layout in the manufacturer documentation.
This page combines the official product identity with package-oriented sourcing context, replacement guidance, application patterns, and design cautions. The comparisons emphasize electrical and functional interchangeability rather than treating every similarly named 74-series component as a safe substitute. Verify timing and logic behavior on the target board, especially when replacing a component across manufacturers or between commercial and extended-temperature variants.
直接替换替代料: SN74LS645H ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: SN74LS645H (相同外形与封装尺寸) ——差异在于 Logic Family, Output State.
SN74LS645N
✅ 直接替换联系询价
查看数据手册 →SN74LS645H 最大额定值与电气特性
| Device Type | Octal bus transceiver |
| Number of Data Channels | 8 channels |
| Bus Communication Mode | Asynchronous two-way communication |
| Logic Family | 74LS low-power Schottky TTL |
| Signal Polarity | Non-inverting |
| Output State | Three-state output |
| RoHS 状态 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
SN74LS645H standard 引脚配置指南
SN74LS645H(standard 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: SN74LS645H.
请参阅 数据手册 以查看完整引脚配置。
典型应用
SN74LS645H 适用于 6 应用s: Bidirectional Processor Bus Buffering, Shared Peripheral Data Bus, Memory Interface Buffering, Data Acquisition Backplane, Industrial Control Data Exchange, Legacy Test Equipment Interface.
Bidirectional Processor Bus Buffering
The SN74LS645H is appropriate for an eight-bit processor bus that must exchange data with slower peripheral devices. Its eight parallel channels reduce the number of interface devices required, while the three-state outputs allow the processor side to relinquish the bus when another participant transmits. The octal architecture follows the data width and control structure common in legacy TTL systems. Before implementation, verify direction and enable truth tables, propagation delay, setup and hold timing, and the capacitive and DC loading contributed by every connected device.
推荐
Shared Peripheral Data Bus
In a shared peripheral bus, several devices may communicate over the same eight conductors without driving them at the same time. The SN74LS645H supports this arrangement through three-state outputs, non-inverting data transfer, and separate control functions for bus direction and output enable. That structure lets an active transmitter drive valid levels while other participants remain isolated. A practical design should include arbitration or an enable discipline, logic-state analysis during transitions, and checks of receiver thresholds and timing margins against the slowest peripheral.
推荐
Memory Interface Buffering
The SN74LS645H can buffer asynchronous data paths between a memory device and a legacy system bus. Eight parallel channels match an eight-bit memory organization, and the high-impedance output state allows the transceiver to isolate itself when another bus master uses shared address or data routing. Because the SN74LS645 is a transceiver rather than a dedicated memory controller, the system must define read and write direction, control chip-select behavior, and bus ownership. Timing should be validated against both memory access requirements and transceiver propagation delay.
推荐
Data Acquisition Backplane
An eight-channel data-acquisition backplane can use the SN74LS645H to distribute command and return data between a controller and modular measurement circuits. The non-inverting, three-state interface keeps the logic behavior compatible with traditional TTL buses while allowing inactive modules to avoid contention. Use the device where each module has a clearly defined enable interval and the bus remains within the family’s specified loading and timing limits. For sensitive analog measurement systems, evaluate ground offsets, bus noise, and supply decoupling separately from the digital transceiver function.
推荐
Industrial Control Data Exchange
The SN74LS645H is suitable for exchanging eight-bit control and status information between legacy industrial controller cards. Its three-state outputs support shared wiring when modules enter inactive states, while non-inverting operation simplifies compatibility with existing TTL data conventions. Industrial implementation should confirm operating-temperature limits, noise margins, isolation strategy, and connector or cable loading before deployment. The bus enable logic must prevent simultaneous activation, and the controller should retain the ability to reset or disable all drivers during fault conditions.
推荐
Legacy Test Equipment Interface
The SN74LS645H can connect a controller to legacy test and measurement equipment that uses an asynchronous eight-bit bus. The transceiver provides a convenient way to place high-impedance isolation between equipment sections and to support controlled direction changes during transfers. Compatibility depends on matching voltage levels, input thresholds, output drive, propagation delay, and connector timing at the far end of the bus. Use this approach for repair and expansion of established TTL systems rather than designing new high-speed fabrics around a legacy-family device.
推荐
工程参考数据: SN74LS645H ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | SN74LS645N |
|---|---|---|
| Manufacturer | Texas Instruments | Texas Instruments |
| Device Function | Octal bus transceiver | Octal bus transceiver |
| Number of Channels | 8 channels | 8 channels |
| Signal Polarity | Non-inverting | Non-inverting |
| Output Configuration | Three-state output | Three-state output |
| Communication Mode | Asynchronous two-way communication | Asynchronous two-way communication |
关键差异点
- Matched eight-channel bidirectional interface (对比 SN74LS645N)
- Three-state output supports shared-bus isolation (对比 SN74LS645N)
- Exact H configuration for original BOM continuity (对比 SN74LS645N)
设计说明
Do not assume that every SN74LS645 orderable suffix is mechanically interchangeable. The available SN74LS645N listing identifies a 20-PDIP package, while the exact SN74LS645H package must be confirmed from the manufacturer documentation. Compare package drawing, row spacing, lead length, pin numbering, and temperature grade before substitution. A matching function name alone does not establish drop-in compatibility on an assembled legacy board.
Define the bus-enable protocol so that no two transmitters assert the same line during a transition. Use the manufacturer truth table to establish direction and output-enable priority, and include a deliberate dead time if control inputs can change asynchronously. Confirm propagation delay, setup and hold timing, input thresholds, and output-current limits against the slowest connected device and the total bus loading.
Place the transceiver close to the connector or bus-isolation boundary when long external cables are present. Keep the ground return continuous and use the package’s recommended supply and decoupling arrangement to prevent bus transients from coupling into adjacent logic. For through-hole legacy designs, inspect all pins for oxidation and verify that replacement leads do not create shorts between adjacent pads before applying power.
合规信息
The accessible product information identifies the device and function but does not provide an explicit compliance declaration for the exact SN74LS645H orderable.