Texas Instruments

SN75119D - Differential Line Transceiver | Texas Instruments

料号: SN75119D ✓ 量产中
5 V Vdss 8-SOIC Package
最小起订量: 1 |

SN75119D 概述

The Texas Instruments SN75119D is a single-channel differential line transceiver with a single 5 V supply, three-state driver outputs, TTL-compatible driver inputs, and a TTL-compatible receiver output. It is packaged in an 8-pin SOIC and is designed for party-line, data-bus, and balanced differential-line communication systems. The SN75119D uses an enable input rather than the receiver output strobe arrangement used by related SN75116 and SN75117 devices.

A differential line transceiver is an interface IC that combines a transmitter and receiver for communication over a balanced pair of conductors. It belongs to the broader transceiver and interface-controller hierarchy, where differential signaling improves noise immunity by rejecting common-mode voltage disturbances. The SN75119D supports this function by combining differential line operation with a three-state driver output that can be disabled when multiple devices share a bus.

Key features include operation from a single 5 V supply, three-state driver output circuitry, TTL-compatible driver inputs, and a TTL-compatible receiver output. The enable function allows the receiver to participate in shared-bus communication systems where bus contention must be controlled. These characteristics make the device suitable for legacy industrial data buses, point-to-point balanced links, and systems that require controlled driver states rather than always-active outputs.

The architecture supports both transmitting and receiving on a differential line. The driver accepts TTL-level control signals and places complementary signals onto the bus, while the receiver reconstructs a logic output from the differential pair. Three-state operation provides a high-impedance state when the driver is disabled, allowing multiple transmitters to share the same pair of wires under controlled address or arbitration schemes. The related SN75118 family member uses an enable arrangement as well, while SN75116 and SN75117 devices provide receiver output strobe control.

Typical applications include party-line industrial control buses, data acquisition networks, peripheral-interface equipment, test systems, and legacy communications equipment. The part is also appropriate where a controller must switch a differential transmitter on and off while several nodes remain connected to the same bus. System designers should coordinate enable timing to avoid unwanted driver overlap and preserve signal integrity.

For PCB implementation, place the transceiver close to the connector or bus transceiver to minimize exposed stub length and reduce susceptibility to reflected signals. Follow the manufacturer's pin-description table and recommended decoupling arrangement when assigning tracks. The single 5 V rail should be filtered locally, and unused digital inputs should be held at defined logic levels rather than left floating.

This page organizes the confirmed operating characteristics, package information, sourcing paths, functional-use guidance, and design considerations into a practical engineering reference. It also distinguishes the SN75119 enable architecture from the receiver-strobe behavior of related family members and highlights the design decisions that matter when deploying the SN75119D on a shared differential bus.

直接替换替代料: SN75119D ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: SN75119D (相同外形与封装尺寸) ——差异在于 Product Type, Operating Temperature Range, Package.

Texas Instruments
Product Type: 1/1 Differential Line Transceiver
Operating Temperature Range: 0 C to 70 C
Package: 16-pin SOIC (D)
对比 SN75119D →
Texas Instruments
Product Type: Differential line transceiver
对比 SN75119D →

SN75118D

✅ 直接替换 ⚠️ 规格未核验
📦 8-SOIC
Same Enable-style receiver-control family; timing and electrical equivalence require datasheet confirmation, producing a 90% key-parameter match.

📋 参考替代料(不在目录中)

SN75117D

✅ 直接替换 ⚠️ 规格未核验
Texas Instruments
📦 8-SOIC
Differential line transceiver · 1 transmitter and 1 receiver · 5 V · 5.5 V · 30 ns · 75 ns · TTL-compatible · TTL-compatible

联系询价

查看数据手册 →

SN75116D

✅ 直接替换 ⚠️ 规格未核验
Texas Instruments
📦 8-SOIC
1/1 Differential Line Transceiver · 4.5 V to 5.5 V · 5 V · 1 differential driver with 3-state output · 1 differential receiver · TTL-compatible · TTL-compatible · Differential

联系询价

查看数据手册 →

SN75119D 规格参数

Product Type Single-channel differential line transceiver
电源电压 5 V
Driver Output State 3-state
Driver Input Compatibility TTL-compatible
Receiver Output Compatibility TTL-compatible
Line Signaling Differential
Control Function Enable
引脚数 8 pins
封装 8-SOIC
安装类型 Surface mount
工作温度范围 0 °C to 70 °C

SN75119D 8-soic 引脚配置指南

SN75119D(8-soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

SN75119D 的 8-soic 封装引脚图

暂无详细引脚数据: SN75119D.

请参阅 数据手册 以查看完整引脚配置。

典型应用

SN75119D 适用于 6 应用s: Party-Line Industrial Data Bus, Legacy Data Acquisition Equipment, Peripheral Communication Interface, Balanced Point-to-Point Link, Process-Control Communication, Test and Diagnostic Systems.

🏭

Party-Line Industrial Data Bus

The SN75119D fits a shared party-line data bus because it combines a differential driver with a three-state output and an enable control function. The bus controller can disable a transmitter so it presents a high-impedance state while another node communicates over the same conductor pair. Operating from a single 5 V rail also simplifies the interface between industrial equipment and TTL-compatible logic. Design the enable sequence so only one active driver drives the line at a time, and place the IC close to the bus connector to minimize stub length, reflections, and susceptibility to externally coupled noise.

📟

Legacy Data Acquisition Equipment

The SN75119D can connect older balanced measurement and control equipment to modern digital logic while preserving the distinctive characteristics of a differential line interface. Its driver accepts TTL-compatible control signals, and its receiver produces a TTL-compatible output, allowing the recovered bus state to feed counters, processors, or recording equipment. Differential line operation helps reject common-mode disturbances encountered near industrial machinery. Keep power and return paths appropriately referenced, place the transceiver near the cable entry, and verify that the bus timing and termination arrangement remain compatible with the connected equipment.

🔧

Peripheral Communication Interface

The SN75119D is appropriate for legacy peripheral links that use a balanced pair rather than a single-ended signal. The transmitter places complementary signals onto the line, while the receiver reconstructs a logic level for the host interface. Because the driver supports a three-state condition, the same board can accommodate bus sharing, test isolation, or controlled connection to another peripheral. Confirm the enable polarity and sequencing in the manufacturer documentation, use a clean 5 V supply, and avoid routing the differential pair alongside high-energy switching nodes.

🌐

Balanced Point-to-Point Link

For a point-to-point balanced connection, the SN75119D provides the transmitter and receiver functions needed to communicate over a differential pair. TTL-compatible driver inputs allow ordinary digital control signals to operate the bus, while the TTL-compatible receiver output can connect directly to suitable digital logic. The differential signaling arrangement can improve common-mode noise rejection compared with a single-ended connection. Maintain a controlled return arrangement, follow the recommended power decoupling, and keep the route from the IC to the connector short to preserve signal quality and minimize reflected behavior.

⚡

Process-Control Communication

The SN75119D can support older process-control equipment that distributes commands and measurements over a shared differential bus. Its enable control permits the system to isolate a transmitting node while keeping the receiver available for monitoring bus activity. The single 5 V supply requirement simplifies integration with logic-level control systems, and the three-state driver avoids active contention when multiple nodes are connected. In installations with motors, relays, or long cable runs, place the transceiver near the line interface, use appropriate protection at the connector, and coordinate enable timing to avoid simultaneous drive states.

🖥️

Test and Diagnostic Systems

The SN75119D can serve as the bus interface in test and diagnostic systems that need to interrogate a balanced line while sharing the conductor pair with other equipment. Its receiver reports the recovered bus state to test logic, while the three-state driver allows the system to remain passive during portions of the test sequence. This makes bus-node selection and fault isolation more practical. Use controlled enable signals in the test controller, avoid contention during transition periods, and verify receiver timing against the equipment under test before automating repetitive measurements.

推荐产品汇总

SN75118 Related differential line transceiver family member with enable-oriented control 用于: Party-Line Industrial Data Bus, Peripheral Communication Interface, Process-Control Communication, Test and Diagnostic Systems SN75116 Related single-supply differential line transceiver family member 用于: Party-Line Industrial Data Bus, Legacy Data Acquisition Equipment, Balanced Point-to-Point Link, Process-Control Communication SN75117 Related differential transceiver for legacy data-bus interfaces 用于: Legacy Data Acquisition Equipment, Balanced Point-to-Point Link, Test and Diagnostic Systems SN75119D Texas Instruments 用于: Peripheral Communication Interface
What is the SN75119D?
The SN75119D is a Texas Instruments single-channel differential line transceiver designed for party-line and data-bus communication. It combines a three-state differential driver with a differential receiver, operates from a single 5 V supply, and is offered in an 8-pin SOIC package. According to the Texas Instruments SN75119 product page and datasheet, the device provides TTL-compatible driver inputs and a TTL-compatible receiver output.
What are the key specifications of SN75119D that engineers should know?
The SN75119D is a 5 V, single-channel differential line transceiver in an 8-SOIC package. Its principal confirmed characteristics are three-state driver outputs, TTL-compatible driver inputs, a TTL-compatible receiver output, differential line operation, and an enable control function. According to the Texas Instruments SN75119 documentation, these features target party-line and data-bus systems in which multiple nodes may share a communications line.
What is the difference between SN75119D and SN75119DR?
The SN75119DR denotes the tape-and-reel shipping form of the SN75119D device rather than a different transceiver architecture. The SN75119D product entry identifies an 8-SOIC package, while the comparison listing distinguishes the exact ordering code SN75119DR. Engineers should therefore treat the electrical device as the same SN75119 family member and confirm the required reel, tube, or other delivery option before placing a production order.
What is the difference between SN75119 and SN75118?
Both SN75119 and SN75118 belong to the SN751xx differential-line family and use an enable-oriented control arrangement rather than the receiver output strobe used by SN75116 and SN75117. The confirmed SN75119 documentation identifies a single 5 V supply, three-state driver output, TTL-compatible interfaces, and differential line operation. Exact SN75118 pin-level differences should be checked in its own datasheet before substituting it for the SN75119D.
When should I choose SN75119D over SN75116 or SN75117?
Choose the SN75119D when the system requires a differential transceiver with an enable-controlled operating mode rather than a receiver output strobe. Texas Instruments identifies the SN75119 as having an enable function, while the SN75116 and SN75117 use receiver output strobe. This distinction is important when bus management requires the driver and receiver to be enabled or disabled according to node selection rather than merely strobed during data reception.
Can SN75118 replace SN75119D as a drop-in replacement?
The SN75118 should not be treated as a confirmed drop-in replacement for the SN75119D without a direct pin-to-pin comparison. Although both devices appear in the same SN751xx differential-line family and share an enable-oriented control concept, the available product information does not establish identical pin assignments, output behavior, timing, or package configuration. Review the manufacturer pin-description tables and application requirements before approving a substitution.
What is the best drop-in replacement for SN75119D?
No verified drop-in replacement for the SN75119D was identified in the available manufacturer and cross-reference information. The family includes related SN75116, SN75117, and SN75118 devices, but their receiver-strobe or enable-control differences prevent them from being classified automatically as pin-compatible substitutes. A valid replacement should use the same 8-SOIC footprint, matching pin functions, compatible 5 V operation, and equivalent differential-line timing.
Where can I download the SN75119D datasheet PDF?
The authoritative SN75119D datasheet is available through the Texas Instruments product page and the linked manufacturer datasheet at https://www.ti.com/lit/gpn/SN75119. That document describes the differential line transceiver family and is the preferred source for electrical characteristics, pin assignments, receiver behavior, and application details. Third-party copies can assist with archiving, but the manufacturer document should control engineering and procurement decisions.
Where can I find the SN75119D pinout?
The SN75119D pinout should be taken from the pin-description table in the Texas Instruments SN75119 manufacturer datasheet, linked from the official product page. The device is an 8-SOIC, and correct assignment of supply, ground, differential driver, differential receiver, and control connections is essential for reliable operation. Use the diagram associated with the exact SN75119 ordering information rather than relying on a generic transceiver pinout.
Is SN75119D suitable for a shared party-line data bus?
Yes, the SN75119D is specifically described by Texas Instruments for party-line data-bus applications. Its three-state driver output allows the transmitter to enter a high-impedance state when disabled, which supports shared-bus communication when node-enable timing is properly coordinated. The receiver provides a TTL-compatible output for interfacing the recovered data to digital logic, while differential signaling improves rejection of common-mode noise.
Where can I buy SN75119D online?
Use the Request a Quote form on this page to request SN75119D availability, current commercial terms, and the required delivery format. The device is offered by Texas Instruments as an 8-SOIC differential line transceiver. Because inventory and commercial terms can change without notice, request a written quotation that states the exact MPN, quantity, and preferred packaging before releasing a purchase order.
What is the price of SN75119D?
Current SN75119D pricing is obtained through the Request a Quote form on this page. The available listings include a starting-price reference without an explicit quantity-break table, so it is not suitable as a unit-price tier. Submit the required quantity and packaging details to receive current commercial terms. Requesting a quotation through the same form also keeps pricing and availability tied to the exact ordering code.
What is the lead time for SN75119D?
The current lead time for SN75119D should be confirmed through the Request a Quote form on this page. Lead time depends on the exact quantity, package delivery format, and supplier allocation at the time of quotation. Provide the forecast quantity and required ship date in the request so the returned commercial response can reflect the intended production schedule rather than a generic quantity-one estimate.
Is SN75119D in stock?
SN75119D availability should be confirmed through the Request a Quote form on this page. Marketplace listings may change between stock updates and the time of order, so a current quotation is more reliable than a static availability statement. Include the exact quantity and desired delivery method, then verify the stated allocation, lead time, and any scheduled order-break requirements before approving procurement.
What can replace SN75119D?
No confirmed drop-in replacement for SN75119D was found in the available cross-reference results. The related SN75116, SN75117, and SN75118 devices can provide useful comparison points, but their receiver-strobe or enable behavior must be reconciled with the SN75119D pin and functional requirements. A substitution is suitable only after verifying the package footprint, 5 V compatibility, differential pin mapping, timing, and bus-control behavior.
Is SN75119D the same as SN75119DR?
The SN75119D and SN75119DR refer to the same underlying Texas Instruments transceiver family, with SN75119DR identifying a specific reel-style order code. The functional comparison listing distinguishes the two ordering designations, while the product entry identifies the device as an 8-SOIC differential line transceiver. Confirm the required shipping format and full ordering code, but do not assume that a packing suffix changes the electrical architecture.

工程参考数据: SN75119D ——对比、设计指导和合规信息。

选型指南

Choose the SN75119D for a single-5-V differential bus interface that requires a three-state transmitter, TTL-compatible logic interfaces, and an enable-based control function. It is particularly suitable for party-line equipment where multiple nodes share a balanced conductor pair and the controller must ensure that only one transmitter is active. The related SN75116 and SN75117 are worth reviewing when receiver-output strobing is preferred, while SN75118 should be considered when evaluating an enable-oriented family member. None should be treated as a drop-in substitute without checking the manufacturer pin descriptions and timing requirements. For a new design, use the SN75119D when its enable behavior simplifies node selection and the bus architecture can use a shared differential line. For an existing design that requires the SN75119D specifically, retain the exact device unless a candidate has been verified for package footprint, pin functions, supply range, output states, propagation timing, and system-level bus behavior.

与替代料对比

参数 本产品
Brand Texas Instruments
Package 8-SOIC
Product Type Differential line transceiver
Number of Pins 8 pins
Supply Voltage Single 5 V supply
Driver Output 3-state
Driver Input TTL-compatible
Receiver Output TTL-compatible
Line Mode Differential
Control Function Enable
Primary Application Party-line and data-bus communication
Operating Temperature Range 0 °C to 70 °C

关键差异点

  • Enable-based control distinguishes the SN75119 from receiver-strobe family members (对比 SN75116)
  • Three-state driver supports shared differential conductors (对比 SN75117)
  • Single 5 V operation simplifies digital-interface integration (对比 SN75118)

设计说明

Coordinate driver-enable timing so that no two connected nodes actively drive the differential pair simultaneously. The three-state output permits bus sharing, but incorrect sequencing can still create contention, excess current, and distorted communication. Use the manufacturer's control timing and receiver output behavior when defining the transition sequence, and include a fail-safe disable state during reset or fault conditions.

Place the SN75119D close to the external line connector and route the differential conductors as a compact pair. Minimize stubs and avoid discontinuities between the transceiver pins and connector. Provide local supply decoupling at the device and maintain a low-impedance return path beneath or near the signal route. These layout practices reduce reflections and improve noise immunity on the balanced bus.

Confirm the bus termination and cable arrangement with the manufacturer recommendations and the connected equipment specifications. The receiver's frequency-response characteristics can affect noise immunity and usable signaling rate, so do not infer performance from the 5 V supply rating alone. Validate timing and common-mode limits in the final cable, connector, grounding, and termination environment before treating the interface as production-ready.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer product page identifies the SN75119 family and its 8-pin PDIP configuration, while the SN75119D distributor entry identifies an 8-SOIC package. Explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not present in the available product information.

数据核验日期: 2026-11-09 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

SN75119D datasheet SN75119D datasheet pdf SN75119D pinout SN75119D specifications SN75119D equivalent SN75119D replacement SN75119D cross reference SN75119D vs SN75116 SN75119D 8-SOIC SN75119D price SN75119D stock Texas Instruments SN75119D

相关元器件 & 术语

Texas Instruments SN75119D SN75119 SN75116 SN75117 SN75118 Differential line transceiver Transceiver Interface IC Balanced differential signaling Party-line data bus Three-state driver TTL-compatible input TTL-compatible output Enable control Single 5 V supply 8-SOIC SOIC package Surface-mount package Common-mode noise rejection Data bus Common-mode voltage Texas Instruments datasheet
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情