STDP2600AD HDMI 1.4 Video Converter | Kinetic Technologies
料号： STDP2600AD ✓ 量产中STDP2600AD 概述
An HDMI-to-DisplayPort converter is a video interface IC within the broader display-interface hierarchy: HDMI input, active bridge conversion, DisplayPort output, and host-controlled configuration. The converter consolidates protocol translation into one device instead of requiring a separate external bridge or graphics subsystem. I2C and SPI control support give the host processor a configuration path for communicating with the converter and coordinating display functions.
The STDP2600AD supports a 21.6 Gbps interface data rate, making it appropriate for modern digital video bridges and commercial display equipment. It accepts the higher data-rate capability associated with HDMI 1.4 while providing a DisplayPort-facing output. The 81-BGA package supports dense PCB integration but requires careful ball-layout matching, escape-routing planning, and via-in-pad or via-adjacent fanout during PCB layout.
Operation from both 1.2 V and 3.3 V permits integration into systems that already maintain those rails. Designers must still confirm which voltage belongs to each power ball and follow the manufacturer's recommended decoupling network. Because the verified distributor listing does not provide a complete electrical table or exposed-pad instruction, those details must be checked against the manufacturer datasheet before schematic capture or PCB release.
Typical uses include HDMI-to-DisplayPort monitor adapters, industrial display controllers, video-format conversion in commercial displays, and embedded systems that accept HDMI but drive a DisplayPort panel. The 0°C to +70°C rating suits temperature-controlled consumer, commercial, and industrial environments but not extended-temperature automotive or outdoor installations without additional qualification.
The primary design consideration is interface integrity. Differential HDMI and DisplayPort routing requires controlled impedance, continuous reference planes, minimized stub branches, and careful BGA escape routing. Power delivery also needs local high-frequency decoupling and verification of simultaneous video activity, because converter performance can be affected by supply noise and signal-return discontinuities.
This page consolidates verified distributor specifications, sourcing links, application guidance, and engineering caveats for the STDP2600AD. It also distinguishes documented parameters from details that require confirmation in the manufacturer datasheet, helping engineers plan evaluation before committing a board layout.
直接替换替代料： STDP2600AD ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料STDP2600AD 规格参数
| Product Type | HDMI-to-DisplayPort video converter IC |
| Input Interface | HDMI 1.4 |
| Output Interface | DisplayPort |
| Control Interface | I2C and SPI |
| Maximum Data Rate | 21.6 Gbps |
| Supply Voltage Options | 1.2 V and 3.3 V |
| 工作温度范围 | 0°C to +70°C |
| 封装 | 81-BGA, 8 x 8 mm |
| 安装类型 | Surface mount |
| Device Category | Video converter IC |
| Manufacturer Description | Advanced HDMI to DisplayPort converter |
| Configuration Interface | I2C, SPI |
| HDMI Version | 1.4 |
| Package Pin Count | 81 balls |
| Package Body Dimensions | 8 x 8 mm |
| Operating Environment | Commercial temperature range |
| RoHS 状态 | RoHS |
| Datasheet Length | 4 pages |
STDP2600AD 8 x 8 mm 引脚配置指南
STDP2600AD（8 x 8 mm 封装）的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据： STDP2600AD.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STDP2600AD 适用于 6 应用s: HDMI-to-DisplayPort Monitor Adapter, Commercial Display Controller, Industrial Panel Interface, Embedded Video Conversion, Digital Signage Player, Video Format Conversion Test Equipment.
HDMI-to-DisplayPort Monitor Adapter
The STDP2600AD fits a compact active adapter that accepts an HDMI 1.4 source and drives a DisplayPort display. Its documented 21.6 Gbps maximum data rate provides the bridge bandwidth needed for modern digital video, while I2C and SPI give the host a way to configure the converter. The 81-BGA 8 x 8 mm package permits a small board, although the escape routing requires controlled impedance and careful return-path continuity.
推荐
Commercial Display Controller
The STDP2600AD can serve as the active video bridge inside a commercial display controller that receives HDMI from an external source and drives a DisplayPort panel. The converter's HDMI 1.4 input, DisplayPort output, and documented 21.6 Gbps data rate support high-speed digital video, while dual I2C and SPI options provide control flexibility. Designers should reserve local decoupling for both listed 1.2 V and 3.3 V rails.
推荐
Industrial Panel Interface
For an industrial HMI or control panel, the STDP2600AD can bridge an HDMI-equipped computer to a DisplayPort touchscreen or panel. Its 0°C to +70°C commercial rating is appropriate for controlled indoor equipment, and the surface-mount 81-BGA package supports dense integration. The main engineering constraints are high-speed BGA fanout, uninterrupted reference planes, and stable supply rails under video traffic.
推荐
Embedded Video Conversion
The STDP2600AD is appropriate when an embedded Linux or microcontroller system produces HDMI content but the connected display requires DisplayPort. Its I2C and SPI control interfaces allow configuration through a host controller, while the 21.6 Gbps data rate supports the physical bridge layer. Firmware and hardware must be validated against the manufacturer's supported timing, EDID, and configuration requirements.
推荐
Digital Signage Player
A digital-signage player can use the STDP2600AD when its media engine outputs HDMI but the selected commercial display exposes DisplayPort. The active converter avoids a separate external bridge box and consolidates the conversion into an 8 x 8 mm BGA footprint. I2C or SPI host control supports board-level configuration, while the 0°C to +70°C range suits controlled indoor signage installations.
推荐
Video Format Conversion Test Equipment
The STDP2600AD can support test equipment that generates or conditions HDMI signals for a DisplayPort sink. Its documented 21.6 Gbps interface capability is useful for validating high-speed conversion paths, and the I2C and SPI interfaces provide control for register-based setup. Bench-board implementations still require calibrated test equipment and compliance probes because the verified excerpts do not specify converter timing accuracy.
推荐
推荐产品汇总
工程参考数据： STDP2600AD ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Kinetic Technologies |
| Package | 81-BGA, 8 x 8 mm |
| Input Interface | HDMI 1.4 |
| Output Interface | DisplayPort |
| Control Interface | I2C and SPI |
| Maximum Data Rate | 21.6 Gbps |
| Supply Voltage | 1.2 V and 3.3 V |
| Operating Temperature | 0°C to +70°C |
| Mounting Type | Surface mount |
| RoHS | RoHS |
关键差异点
- Integrated active video conversion （对比 A passive HDMI-to-DisplayPort adapter)
- Multiple host-control paths （对比 A converter supporting only one control interface)
- Compact surface-mount integration （对比 A discrete or connector-based conversion solution)
- Dual supply-rail support （对比 A single-rail external bridge)
设计说明
Route the HDMI and DisplayPort differential pairs as controlled-impedance transmission lines over a continuous reference plane. The 81-BGA package requires a deliberate fanout strategy, preferably with short symmetric escapes and adequate via transitions. Avoid plane splits, test-point stubs, and unnecessary right-angle changes because return-path discontinuities can degrade signal integrity at the documented 21.6 Gbps class of operation.
Assign the 1.2 V and 3.3 V rails only after checking the manufacturer pin table and power-ball grouping. Place the recommended high-frequency decoupling capacitors directly beside the corresponding BGA power balls, with additional bulk capacitance near the regulator or supply entry point. Validate sequencing, voltage tolerance, and current consumption against the complete datasheet because these electrical details are not present in the verified excerpts.
Do not treat any public substitute as a drop-in replacement unless its ball map, exposed-pad treatment, supply pins, control pins, HDMI input, and DisplayPort output match exactly. The supplied cross-reference searches did not identify a verified 81-BGA equivalent. Functional similarity alone is insufficient because a different package or BGA ball assignment can require a complete PCB redesign.
Confirm supported resolution, refresh rate, color format, and embedded audio modes against the manufacturer datasheet before configuring the converter through I2C or SPI. Use the manufacturer reference layout and recommended device footprints, and maintain the specified host interface timing. The verified sources establish HDMI 1.4 and a 21.6 Gbps maximum data rate but do not provide the complete timing matrix.
合规信息
The verified JCPCB listing explicitly identifies the STDP2600AD as RoHS. No verified REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statements were provided. AEC-Q100 is not applicable because the verified operating range is 0°C to +70°C and no automotive qualification is stated.
