STDP2600AD HDMI 1.4 Video Converter | Kinetic Technologies
MPN: STDP2600AD ✓ فعالSTDP2600AD نمای کلی
An HDMI-to-DisplayPort converter is a video interface IC within the broader display-interface hierarchy: HDMI input, active bridge conversion, DisplayPort output, and host-controlled configuration. The converter consolidates protocol translation into one device instead of requiring a separate external bridge or graphics subsystem. I2C and SPI control support give the host processor a configuration path for communicating with the converter and coordinating display functions.
The STDP2600AD supports a 21.6 Gbps interface data rate, making it appropriate for modern digital video bridges and commercial display equipment. It accepts the higher data-rate capability associated with HDMI 1.4 while providing a DisplayPort-facing output. The 81-BGA package supports dense PCB integration but requires careful ball-layout matching, escape-routing planning, and via-in-pad or via-adjacent fanout during PCB layout.
Operation from both 1.2 V and 3.3 V permits integration into systems that already maintain those rails. Designers must still confirm which voltage belongs to each power ball and follow the manufacturer's recommended decoupling network. Because the verified distributor listing does not provide a complete electrical table or exposed-pad instruction, those details must be checked against the manufacturer datasheet before schematic capture or PCB release.
Typical uses include HDMI-to-DisplayPort monitor adapters, industrial display controllers, video-format conversion in commercial displays, and embedded systems that accept HDMI but drive a DisplayPort panel. The 0°C to +70°C rating suits temperature-controlled consumer, commercial, and industrial environments but not extended-temperature automotive or outdoor installations without additional qualification.
The primary design consideration is interface integrity. Differential HDMI and DisplayPort routing requires controlled impedance, continuous reference planes, minimized stub branches, and careful BGA escape routing. Power delivery also needs local high-frequency decoupling and verification of simultaneous video activity, because converter performance can be affected by supply noise and signal-return discontinuities.
This page consolidates verified distributor specifications, sourcing links, application guidance, and engineering caveats for the STDP2600AD. It also distinguishes documented parameters from details that require confirmation in the manufacturer datasheet, helping engineers plan evaluation before committing a board layout.
جایگزین‌های drop-in برای STDP2600AD — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینSTDP2600AD مشخصات
| Product Type | HDMI-to-DisplayPort video converter IC |
| Input Interface | HDMI 1.4 |
| Output Interface | DisplayPort |
| Control Interface | I2C and SPI |
| Maximum Data Rate | 21.6 Gbps |
| Supply Voltage Options | 1.2 V and 3.3 V |
| محدوده دمای کاری | 0°C to +70°C |
| بسته‌بندی | 81-BGA, 8 x 8 mm |
| نوع نصب | Surface mount |
| Device Category | Video converter IC |
| Manufacturer Description | Advanced HDMI to DisplayPort converter |
| Configuration Interface | I2C, SPI |
| HDMI Version | 1.4 |
| Package Pin Count | 81 balls |
| Package Body Dimensions | 8 x 8 mm |
| Operating Environment | Commercial temperature range |
| وضعیت RoHS | RoHS |
| Datasheet Length | 4 pages |
راهنمای پیکربندی پین STDP2600AD 8 x 8 mm
پیکربندی پین برای STDP2600AD (پکیج 8 x 8 mm). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.
داده پین‌آوت تفصیلی موجود نیست برای STDP2600AD.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
STDP2600AD مناسب است برای 6 کاربردs: HDMI-to-DisplayPort Monitor Adapter, Commercial Display Controller, Industrial Panel Interface, Embedded Video Conversion, Digital Signage Player, Video Format Conversion Test Equipment.
HDMI-to-DisplayPort Monitor Adapter
The STDP2600AD fits a compact active adapter that accepts an HDMI 1.4 source and drives a DisplayPort display. Its documented 21.6 Gbps maximum data rate provides the bridge bandwidth needed for modern digital video, while I2C and SPI give the host a way to configure the converter. The 81-BGA 8 x 8 mm package permits a small board, although the escape routing requires controlled impedance and careful return-path continuity.
پیشنهادی
Commercial Display Controller
The STDP2600AD can serve as the active video bridge inside a commercial display controller that receives HDMI from an external source and drives a DisplayPort panel. The converter's HDMI 1.4 input, DisplayPort output, and documented 21.6 Gbps data rate support high-speed digital video, while dual I2C and SPI options provide control flexibility. Designers should reserve local decoupling for both listed 1.2 V and 3.3 V rails.
پیشنهادی
Industrial Panel Interface
For an industrial HMI or control panel, the STDP2600AD can bridge an HDMI-equipped computer to a DisplayPort touchscreen or panel. Its 0°C to +70°C commercial rating is appropriate for controlled indoor equipment, and the surface-mount 81-BGA package supports dense integration. The main engineering constraints are high-speed BGA fanout, uninterrupted reference planes, and stable supply rails under video traffic.
پیشنهادی
Embedded Video Conversion
The STDP2600AD is appropriate when an embedded Linux or microcontroller system produces HDMI content but the connected display requires DisplayPort. Its I2C and SPI control interfaces allow configuration through a host controller, while the 21.6 Gbps data rate supports the physical bridge layer. Firmware and hardware must be validated against the manufacturer's supported timing, EDID, and configuration requirements.
پیشنهادی
Digital Signage Player
A digital-signage player can use the STDP2600AD when its media engine outputs HDMI but the selected commercial display exposes DisplayPort. The active converter avoids a separate external bridge box and consolidates the conversion into an 8 x 8 mm BGA footprint. I2C or SPI host control supports board-level configuration, while the 0°C to +70°C range suits controlled indoor signage installations.
پیشنهادی
Video Format Conversion Test Equipment
The STDP2600AD can support test equipment that generates or conditions HDMI signals for a DisplayPort sink. Its documented 21.6 Gbps interface capability is useful for validating high-speed conversion paths, and the I2C and SPI interfaces provide control for register-based setup. Bench-board implementations still require calibrated test equipment and compliance probes because the verified excerpts do not specify converter timing accuracy.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای STDP2600AD — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول |
|---|---|
| Brand | Kinetic Technologies |
| Package | 81-BGA, 8 x 8 mm |
| Input Interface | HDMI 1.4 |
| Output Interface | DisplayPort |
| Control Interface | I2C and SPI |
| Maximum Data Rate | 21.6 Gbps |
| Supply Voltage | 1.2 V and 3.3 V |
| Operating Temperature | 0°C to +70°C |
| Mounting Type | Surface mount |
| RoHS | RoHS |
تفاوت‌های کلیدی
- Integrated active video conversion (در مقابلA passive HDMI-to-DisplayPort adapter)
- Multiple host-control paths (در مقابلA converter supporting only one control interface)
- Compact surface-mount integration (در مقابلA discrete or connector-based conversion solution)
- Dual supply-rail support (در مقابلA single-rail external bridge)
یادداشت‌های طراحی
Route the HDMI and DisplayPort differential pairs as controlled-impedance transmission lines over a continuous reference plane. The 81-BGA package requires a deliberate fanout strategy, preferably with short symmetric escapes and adequate via transitions. Avoid plane splits, test-point stubs, and unnecessary right-angle changes because return-path discontinuities can degrade signal integrity at the documented 21.6 Gbps class of operation.
Assign the 1.2 V and 3.3 V rails only after checking the manufacturer pin table and power-ball grouping. Place the recommended high-frequency decoupling capacitors directly beside the corresponding BGA power balls, with additional bulk capacitance near the regulator or supply entry point. Validate sequencing, voltage tolerance, and current consumption against the complete datasheet because these electrical details are not present in the verified excerpts.
Do not treat any public substitute as a drop-in replacement unless its ball map, exposed-pad treatment, supply pins, control pins, HDMI input, and DisplayPort output match exactly. The supplied cross-reference searches did not identify a verified 81-BGA equivalent. Functional similarity alone is insufficient because a different package or BGA ball assignment can require a complete PCB redesign.
Confirm supported resolution, refresh rate, color format, and embedded audio modes against the manufacturer datasheet before configuring the converter through I2C or SPI. Use the manufacturer reference layout and recommended device footprints, and maintain the specified host interface timing. The verified sources establish HDMI 1.4 and a 21.6 Gbps maximum data rate but do not provide the complete timing matrix.
اطلاعات انطباق
The verified JCPCB listing explicitly identifies the STDP2600AD as RoHS. No verified REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statements were provided. AEC-Q100 is not applicable because the verified operating range is 0°C to +70°C and no automotive qualification is stated.
