STMicroelectronics

STM32F051C8U6 - 48MHz Cortex-M0 64KB MCU | STMicroelectronics

料号: STM32F051C8U6 ✓ 量产中
2.5 V to 3.3 V Vdss 48-UFQFPN, 7 x 7 mm Package 48 MHz Speed 64 KB Memory
最小起订量: 1 |

STM32F051C8U6 概述

The STMicroelectronics STM32F051C8U6 is a 32-bit ARM Cortex-M0 microcontroller operating up to 48 MHz, with 64 KB of Flash memory in a 48-pin UFQFPN 7 x 7 mm package. Its 2.5 V to 3.3 V supply operation and compact exposed-pad package suit cost-sensitive embedded products requiring an Arm-based control architecture, modest code storage, and a low pin-count surface-mount footprint.

A microcontroller is a programmable system-on-chip that integrates a processor core, memory, clocking, and peripherals into one package. The STM32F0 family belongs to the MCU hierarchy within embedded semiconductors and combines an Arm Cortex-M0 instruction set with peripheral blocks for digital control. The STM32F051C8U6 is positioned as an entry-level device for applications that need deterministic embedded control without a high-performance Cortex-M processor.

The headline specifications are a 48 MHz maximum core frequency, 64 KB of Flash memory, and a 48-UFQFPN package measuring 7 x 7 mm. The STM32F051C8U6 also operates from a 2.5 V to 3.3 V supply. These characteristics make it suitable for compact embedded controllers, sensor-hub products, access-control equipment, industrial interfaces, and low-cost consumer appliances requiring an Arm Cortex-M0 processing core.

STMicroelectronics describes the STM32F051xx family as incorporating a high-performance 32-bit RISC Arm Cortex-M0 core. At the family level, the MCU combines embedded Flash, SRAM, GPIO, timers, communication peripherals, and debug support in a small package. The C8 density designation identifies the 64 KB Flash configuration, while the U6 ordering code identifies the UFQFPN package and temperature/packing arrangement used by this exact orderable MPN.

Typical implementations include a sensor-conditioning controller, a compact industrial interface, a security or access-control peripheral, a small motor-control controller, and a low-power consumer device. Designers can use the microcontroller to sample inputs, execute control logic, manage timers, and communicate with external sensors or actuators while retaining a small board footprint. The exposed pad also provides a direct thermal path to the PCB when the operating environment or switching activity creates significant self-heating.

PCB design should preserve the exposed-pad land pattern, connect it to the appropriate ground reference, and place decoupling capacitors close to the device. Firmware development should follow the STM32CubeMX configuration workflow and the STM32F0 reference materials. Before schematic release, verify every peripheral pin, power-domain connection, boot configuration, and debug interface against the manufacturer pinout and datasheet.

This product page combines the exact STM32F051C8U6 ordering information with application guidance, engineering design notes, and a focused comparison of compatible microcontroller options. It is intended to help engineers confirm footprint, memory, core performance, sourcing requirements, and replacement considerations before committing the MCU to a PCB design.

直接替换替代料: STM32F051C8U6 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: STM32F051C8U6 (相同外形与封装尺寸) ——差异在于 Package, Flash Memory, ADC, Communication Interfaces, Core Architecture.

STMicroelectronics
Package: 48-UFQFPN (7x7 mm)
Flash Memory: 32 KB
ADC: 12-bit, up to 19 channels, 1 Msps
对比 STM32F051C8U6 →
STMicroelectronics
Package: 48-UFQFPN (7x7 mm) exposed pad
ADC: 1 × 12-bit, 1 µs conversion, up to 16 channels
Communication Interfaces: 2 × USART, 2 × I²C (SMBus/PMBus), 2 × SPI (one with I²S), HDMI CEC, USB 2.0 FS device, CAN 2.0B
对比 STM32F051C8U6 →
STMicroelectronics
Package: 48-UFQFPN (7x7)
Flash Memory: 64KB (64K x 8)
Core Architecture: 32-bit RISC
对比 STM32F051C8U6 →

STM32F051C4U6

✅ 直接替换 ⚠️ 规格未核验
📦 48-UFQFPN (7x7)
Flash memory is 16 KB versus 64 KB, a 48 KB reduction; package and core family align for board-level review

📋 参考替代料(不在目录中)

STM32F051C6U6

✅ 直接替换 ⚠️ 规格未核验
STMicroelectronics
📦 48-UFQFPN (7x7)
ARM Cortex-M0 32-bit RISC · 48 MHz · 32 KB · 4 KB · 48-UFQFPN (7x7 mm) · 2.0 V to 3.6 V · 39 · 12-bit, up to 19 channels, 1 Msps

联系询价

查看数据手册 →

STM32F072C8U7

✅ 直接替换
STMicroelectronics
📦 48-UFQFPN (7x7)
32-bit ARM Cortex-M0 microcontroller · ARM Cortex-M0 RISC · 48 MHz · 64KB (64K x 8) · 2.5V/3.3V · 48-UFQFPN (7x7) · Surface Mount · USB

联系询价

查看数据手册 →

STM32F050C4U6

✅ 直接替换 ⚠️ 规格未核验
📦 48-UFQFPN (7x7)
Flash memory is 16 KB versus 64 KB, a 48 KB reduction; lower-density STM32F0 configuration

📋 参考替代料(不在目录中)

STM32F050C6U6

✅ 直接替换 ⚠️ 规格未核验
📦 48-UFQFPN (7x7)
Flash memory is 32 KB versus 64 KB, a 32 KB reduction; lower-density STM32F0 configuration

📋 参考替代料(不在目录中)

STM32F051C8U6 最大额定值与电气特性

Product Type 32-bit microcontroller
Processor Core Arm Cortex-M0
Instruction Set 32-bit RISC
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB
Flash Organization 64K x 8 bits
工作电源电压 2.5 V to 3.3 V
封装 48-UFQFPN, 7 x 7 mm
引脚数量 48 pins
安装类型 Surface mount
Exposed Pad Present
Product Series STM32F0
Core Variant STM32F051C8

STM32F051C8U6 48-ufqfpn, 7 x 7 mm 引脚配置指南

STM32F051C8U6(48-ufqfpn, 7 x 7 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

STM32F051C8U6 的 48-ufqfpn, 7 x 7 mm 封装引脚图

暂无详细引脚数据: STM32F051C8U6.

请参阅 数据手册 以查看完整引脚配置。

典型应用

STM32F051C8U6 适用于 6 应用s: Compact Sensor Hub Controller, Industrial Interface Controller, Access-Control Peripheral, Small Motor Controller, Connected Measurement Product, Low-Power Consumer Controller.

🧩

Compact Sensor Hub Controller

The STM32F051C8U6 fits a compact sensor hub because its 48 MHz Arm Cortex-M0 core can execute sampling, filtering, and control logic while the 64 KB Flash stores application firmware. The 48-UFQFPN 7 x 7 mm package preserves PCB area in compact sensing products. A designer can connect digital sensors through the available GPIO and timer resources, then use a communication peripheral for host or gateway data transfer. Before finalizing the design, confirm the exact peripheral assignments, interrupt requirements, and pin multiplexing in the STM32F051C8 documentation.

🏭

Industrial Interface Controller

The STM32F051C8U6 is suitable for a small industrial interface that must translate between sensors, actuators, and an embedded supervisory system. Its 48 MHz Cortex-M0 processing core provides dedicated embedded-control performance, while 64 KB of Flash accommodates protocol handling and application logic. The 2.5 V to 3.3 V operating range supports conventional 3.3 V interface electronics. In an industrial design, isolate external field wiring appropriately, define safe fault states, and verify temperature, ESD, and EMC requirements for the installation environment.

🔒

Access-Control Peripheral

The STM32F051C8U6 can manage a compact access-control peripheral that reads credentials, controls an electromechanical lock, drives indicators, and reports status to a host. Its 64 KB Flash is suitable for a modest firmware image, while the Arm Cortex-M0 core handles GPIO, timing, and communication tasks in a small 7 x 7 mm footprint. Use fail-safe or fail-secure actuation logic appropriate to the installation, and validate the complete pin map against the exact ordering code. The 3.3 V supply operation simplifies integration with common digital logic levels.

⚡

Small Motor Controller

The STM32F051C8U6 is appropriate for a small closed-loop motor controller based on timers, GPIO, and embedded control firmware. A 48 MHz Cortex-M0 core can execute commutation, speed, or position-control logic, while the 48-pin UFQFPN package keeps the controller compact. The 64 KB Flash provides room for control code and configuration tables. Confirm the specific timer channels, encoder interfaces, PWM outputs, and fault-detection pins used by the motor system. Add appropriate driver protection and verify thermal performance at the intended motor current.

📡

Connected Measurement Product

The STM32F051C8U6 supports a compact measurement product that acquires data from external sensors and forwards processed results over a serial or bus interface. Its 48 MHz Cortex-M0 core is suited to deterministic sampling and control, and 64 KB of Flash provides a practical code budget for drivers, communications, and application logic. The compact 7 x 7 mm UFQFPN package reduces board area in portable instruments. Select the external interface transceiver according to voltage, reach, and isolation requirements, and validate signal-integrity settings against the chosen bus speed.

📱

Low-Power Consumer Controller

The STM32F051C8U6 is well suited to a low-power consumer device that coordinates buttons, indicators, sensors, and a low-rate communications link. Its 48 MHz Cortex-M0 core provides ample control performance, while the 2.5 V to 3.3 V operating range supports compact 3.3 V systems. The 48-UFQFPN package enables a small board, and 64 KB of Flash provides room for a user-interface state machine and protocol handlers. Use low-power modes only after reviewing clock, peripheral, and wake-source behavior, and size the decoupling network for the selected regulator and operating mode.

What is the operating voltage of STM32F051C8U6?
The STM32F051C8U6 operates from 2.5 V to 3.3 V. According to the STMicroelectronics STM32F051C8 product documentation, this 48-pin UFQFPN device is a 32-bit microcontroller built around the Arm Cortex-M0 core. The supply range makes it appropriate for 3.3 V embedded systems, but designers should keep I/O voltage levels aligned with the selected supply and confirm absolute maximum ratings in the manufacturer datasheet.
What are the key specifications of STM32F051C8U6?
The STM32F051C8U6 is a 32-bit Arm Cortex-M0 microcontroller with a maximum CPU frequency of 48 MHz and 64 KB of Flash memory. It is packaged in a 48-pin UFQFPN measuring 7 x 7 mm and operates from 2.5 V to 3.3 V. STMicroelectronics identifies the device as part of its STM32F0 family, providing a compact embedded-processing solution for cost-sensitive controls and connected peripherals.
Where can I download the STM32F051C8U6 datasheet PDF?
The official STM32F051C8U6 documentation is available through the STMicroelectronics product page at https://www.st.com/en/microcontrollers-microprocessors/stm32f051c8.html. From that page, engineers can locate the manufacturer datasheet and supporting technical resources. Use the exact STM32F051C8U6 ordering information when reviewing the package, pinout, electrical limits, and ordering-code details.
Where can I find the STM32F051C8U6 pinout?
The STM32F051C8U6 pinout is documented on the official STMicroelectronics STM32F051C8 product page and in the linked manufacturer datasheet. The component uses a 48-pin UFQFPN package with an exposed pad. Assign PCB nets using the pin-description and package diagrams in those documents rather than relying on a generic 48-pin symbol, especially for exposed-pad, ground, supply, and debugging connections.
Is STM32F051C8U6 suitable for industrial control systems?
The STM32F051C8U6 can suit industrial control applications that fit its 48 MHz Arm Cortex-M0 core, 64 KB Flash memory, 2.5 V to 3.3 V supply range, and compact 48-pin UFQFPN package. Its suitability depends on the required peripheral mix, temperature rating, isolation strategy, and electromagnetic environment. Confirm the ordering code’s temperature grade and specific peripheral requirements before releasing a production design.
What is the difference between STM32F051C8U6 and STM32F072C8U7?
The STM32F051C8U6 and STM32F072C8U7 both appear as 32-bit Arm Cortex-M0 devices with 64 KB Flash in a 48-pin UFQFPN package. Their peripheral sets and device-specific capabilities are not identical, so footprint compatibility does not by itself prove electrical or firmware equivalence. Review the STMicroelectronics datasheets for each ordering code and confirm every used pin, interrupt, peripheral, clock, and programming requirement.
STM32F051C8U6 vs STM32F072C8U7 - which is better for a compact controller?
Choose the STM32F051C8U6 when an STM32F0 design specifically targets its verified peripheral set, electrical limits, and exact 48-pin UFQFPN implementation. Consider the STM32F072C8U7 only after comparing its datasheet features and pin definitions against the functions used by the board. Both devices share the same visible package format in the comparison data, but package similarity alone does not establish full drop-in equivalence.
When should I choose STM32F051C8U6 over STM32F050C4T6?
The STM32F051C8U6 is the better starting point when 64 KB of Flash is required, because the STM32F050C4T6 belongs to a lower-memory density within the STM32F0 range. Memory capacity alone does not determine suitability; compare package pins, SRAM, peripheral availability, clock requirements, and firmware footprint. Use STM32F050C4T6 only when its lower memory density and complete electrical specification satisfy the design.
When should I choose STM32F051C8U6 over STM32F051C4U6?
Choose STM32F051C8U6 when the application needs more program storage than the STM32F051C4U6 configuration, because the C8 device provides 64 KB of Flash. The STM32F051C4U6 may be appropriate for a smaller firmware image if its available memory and peripherals are sufficient. Confirm the exact package and pin compatibility in the manufacturer documentation before treating either density as a drop-in substitute.
What is the best drop-in replacement for STM32F051C8U6?
No alternative can be designated as a guaranteed drop-in replacement without a verified comparison of the package, pin map, electrical limits, memory, peripherals, and firmware. Same-package STM32F0 candidates may include lower-density devices or related family members, but each requires a full schematic and firmware review. The closest documented option is the STM32F072C8U7, which shares the 48-pin UFQFPN format and 64 KB Flash configuration.
Can STM32F072C8U7 replace STM32F051C8U6?
The STM32F072C8U7 can be considered a candidate replacement because comparison information identifies both devices as 32-bit Arm Cortex-M0 MCUs with 64 KB Flash in a 48-pin UFQFPN package. It should not be installed as an unconditional substitute: compare every occupied pin, power connection, peripheral function, interrupt mapping, clock setting, and boot condition in the two STMicroelectronics datasheets before production release.
What can replace STM32F051C8U6?
The STM32F072C8U7 is the closest documented candidate, while lower-density STM32F051 UFQFPN configurations may work when their memory and peripheral coverage meet the application. Cross-brand pin-compatible MCU options are not established by the available cross-reference information. Treat every proposed replacement as a board-specific engineering review, including startup code, timing, peripherals, electromagnetic behavior, and lifecycle requirements.
Is STM32F051C8U6 the same as STM32F072C8U7?
No. The STM32F051C8U6 and STM32F072C8U7 share several headline characteristics—32-bit Arm Cortex-M0 processing, 64 KB Flash, and a 48-pin UFQFPN package—but they are not the same device. Their peripheral sets and detailed electrical characteristics can differ, so the STM32F072C8U7 is only a candidate for board-by-board evaluation, not an automatic substitution.
Where can I buy STM32F051C8U6 online?
Use the Request a Quote form on this page to ask about STM32F051C8U6 availability, order quantities, lead time, and the exact UFQFPN ordering configuration. The manufacturer identifies STM32F051C8U6 as a 48-UFQFPN 7 x 7 mm device with 64 KB Flash. A purchase request should include the target quantity, required delivery date, and any lot-traceability or regulatory requirements.
What is the price of STM32F051C8U6?
Current commercial terms for STM32F051C8U6 are handled through the Request a Quote form on this page. Enter the required quantity and packaging or delivery requirements to obtain a current quotation. The structured pricing data on this page tracks qualifying quantity-break listings, while the quote form provides the appropriate channel for a confirmed order and availability review.
What is the lead time for STM32F051C8U6?
Submit an STM32F051C8U6 inquiry through the Request a Quote form on this page to request current lead time and stock confirmation. Lead time can vary with order volume, production scheduling, package choice, and traceability requirements. Specify the annual and initial order quantities plus the required delivery date so the commercial response reflects the actual procurement requirement.
Is STM32F051C8U6 in stock?
Current stock for STM32F051C8U6 should be confirmed through the Request a Quote form on this page. The exact orderable MPN is STM32F051C8U6 in a 48-UFQFPN 7 x 7 mm package, so a quotation request should state whether the required quantity is for production, prototype, or evaluation builds. Availability should not be inferred from a product-page listing alone.
How should the STM32F051C8U6 UFQFPN footprint be laid out?
Use the STMicroelectronics package drawing for the 48-UFQFPN 7 x 7 mm layout, including its exposed thermal pad, rather than deriving the land pattern from a generic QFN symbol. Confirm pad dimensions, solder-mask and paste apertures, courtyard clearance, and exposed-pad connection in the latest mechanical drawing. Place local decoupling beside the relevant supply pins and provide a low-impedance ground path beneath the device.

工程参考数据: STM32F051C8U6 ——对比、设计指导和合规信息。

选型指南

Choose the STM32F051C8U6 when the board is designed around the STM32F051 family and requires a 48 MHz Arm Cortex-M0 core, 64 KB of Flash, and a compact 48-UFQFPN footprint. The lower-density STM32F051C4U6 and STM32F051C6U6 may be useful when their smaller Flash budgets still fit the firmware, while the STM32F050 alternatives belong to a different feature tier. The STM32F072C8U7 is the closest documented related candidate because it also provides a 48 MHz Cortex-M0 core, 64 KB of Flash, and the same visible package format. Nevertheless, select it only after comparing its peripheral set, pin functions, startup requirements, and application firmware. For a new production design, treat every replacement as a qualified engineering change rather than a mechanical substitution.

与替代料对比

参数 本产品 STM32F051C4U6 STM32F051C6U6 STM32F072C8U7 STM32F050C4U6 STM32F050C6U6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 48-UFQFPN (7x7) 48-UFQFPN (7x7) 48-UFQFPN (7x7) 48-UFQFPN (7x7) 48-UFQFPN (7x7) 48-UFQFPN (7x7)
Processor Core Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 64 KB 16 KB 32 KB 64 KB 16 KB 32 KB
Operating Supply Voltage 2.5 V to 3.3 V 2.5 V to 3.3 V 2.5 V to 3.3 V 2.5 V to 3.3 V 2.5 V to 3.3 V 2.5 V to 3.3 V
Special Feature Difference 64 KB STM32F051 density Lower-memory STM32F051 density Lower-memory STM32F051 density Related STM32F0 family with a different peripheral feature set Lower-memory STM32F050 density Lower-memory STM32F050 density

关键差异点

  • Higher Flash capacity than lower-density STM32F0 candidates (对比 STM32F051C6U6)
  • Larger memory budget than STM32F050 options (对比 STM32F050C4U6)
  • Same core frequency and Flash capacity as the closest documented related candidate (对比 STM32F072C8U7)

设计说明

Use the manufacturer package drawing for the 48-UFQFPN 7 x 7 mm footprint and preserve the exposed-pad geometry. Place supply decoupling capacitors close to the associated pins, provide a continuous ground reference beneath the device, and verify the thermal-pad net against the selected schematic. A generic QFN-48 land pattern is not a substitute for the official drawing because pad dimensions and exposed-pad construction determine solderability.

Do not treat matching package dimensions as proof of a drop-in replacement. Before substituting an STM32F0 device, create a pin-by-pin matrix covering power, ground, boot, reset, debug, clock, communication, timers, and GPIO functions. Also check interrupt vectors, peripheral register differences, startup code, and clock initialization. The STM32F072C8U7 has matching headline CPU and Flash values, but its peripheral compatibility still requires schematic and firmware validation.

Route the exposed pad into the PCB ground plane with multiple thermal vias where permitted by the package drawing and assembly process. Estimate junction heating from actual operating current and switching activity rather than CPU frequency alone. The embedded thermal path is most effective when the board has sufficient copper area, the vias are not starved by isolation requirements, and the enclosure does not trap heat. Validate the final assembly under worst-case ambient temperature.

Design the 2.5 V to 3.3 V supply network around the MCU's selected operating mode and peripheral load. Keep high-current switching loops away from sensitive input references, confirm startup and brownout behavior, and maintain the decoupling values and layout specified by STMicroelectronics. Because the device combines analog and digital functions, a clean return path and correctly placed bulk and high-frequency capacitors are important for repeatable peripheral performance.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the product results and require confirmation from the manufacturer or applicable compliance documentation.

相关搜索

STM32F051C8U6 datasheet STM32F051C8U6 specifications STM32F051C8U6 pinout STM32F051C8U6 datasheet pdf STM32F051C8U6 footprint STM32F051C8U6 equivalent STM32F051C8U6 replacement STM32F051C8U6 cross reference STM32F051C8U6 vs STM32F072C8U7 STM32F051C8U6 price STM32F051C8U6 stock STMicroelectronics STM32F051C8U6 48MHz Cortex-M0 64KB UFQFPN STM32F051C8U6 application circuit

相关元器件 & 术语

STMicroelectronics STM32F051C8U6 STM32F051C8 STM32F051C4U6 STM32F051C6U6 STM32F072C8U7 STM32F050C4U6 STM32F050C6U6 Arm Cortex-M0 32-bit RISC core STM32F0 microcontroller MCU embedded controller semiconductor 48 MHz 64 KB Flash 2.5 V to 3.3 V 48-UFQFPN QFN family surface mount SMD package exposed pad sensor hub industrial interface access control motor control
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情