STM32F051C8U6 - 48MHz Cortex-M0 64KB MCU | STMicroelectronics
MPN: STM32F051C8U6 ✓ فعالSTM32F051C8U6 نمای کلی
A microcontroller is a programmable system-on-chip that integrates a processor core, memory, clocking, and peripherals into one package. The STM32F0 family belongs to the MCU hierarchy within embedded semiconductors and combines an Arm Cortex-M0 instruction set with peripheral blocks for digital control. The STM32F051C8U6 is positioned as an entry-level device for applications that need deterministic embedded control without a high-performance Cortex-M processor.
The headline specifications are a 48 MHz maximum core frequency, 64 KB of Flash memory, and a 48-UFQFPN package measuring 7 x 7 mm. The STM32F051C8U6 also operates from a 2.5 V to 3.3 V supply. These characteristics make it suitable for compact embedded controllers, sensor-hub products, access-control equipment, industrial interfaces, and low-cost consumer appliances requiring an Arm Cortex-M0 processing core.
STMicroelectronics describes the STM32F051xx family as incorporating a high-performance 32-bit RISC Arm Cortex-M0 core. At the family level, the MCU combines embedded Flash, SRAM, GPIO, timers, communication peripherals, and debug support in a small package. The C8 density designation identifies the 64 KB Flash configuration, while the U6 ordering code identifies the UFQFPN package and temperature/packing arrangement used by this exact orderable MPN.
Typical implementations include a sensor-conditioning controller, a compact industrial interface, a security or access-control peripheral, a small motor-control controller, and a low-power consumer device. Designers can use the microcontroller to sample inputs, execute control logic, manage timers, and communicate with external sensors or actuators while retaining a small board footprint. The exposed pad also provides a direct thermal path to the PCB when the operating environment or switching activity creates significant self-heating.
PCB design should preserve the exposed-pad land pattern, connect it to the appropriate ground reference, and place decoupling capacitors close to the device. Firmware development should follow the STM32CubeMX configuration workflow and the STM32F0 reference materials. Before schematic release, verify every peripheral pin, power-domain connection, boot configuration, and debug interface against the manufacturer pinout and datasheet.
This product page combines the exact STM32F051C8U6 ordering information with application guidance, engineering design notes, and a focused comparison of compatible microcontroller options. It is intended to help engineers confirm footprint, memory, core performance, sourcing requirements, and replacement considerations before committing the MCU to a PCB design.
جایگزینهای drop-in برای STM32F051C8U6 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای STM32F051C8U6 (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Flash Memory, ADC, Communication Interfaces, Core Architecture.
STM32F051C4U6
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
STM32F051C6U6
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←STM32F072C8U7
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←STM32F050C4U6
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
STM32F050C6U6
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
STM32F051C8U6 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 32-bit microcontroller |
| Processor Core | Arm Cortex-M0 |
| Instruction Set | 32-bit RISC |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| ولتاژ تغذیه کاری | 2.5 V to 3.3 V |
| بستهبندی | 48-UFQFPN, 7 x 7 mm |
| تعداد پایه | 48 pins |
| نوع نصب | Surface mount |
| Exposed Pad | Present |
| Product Series | STM32F0 |
| Core Variant | STM32F051C8 |
راهنمای پیکربندی پین STM32F051C8U6 48-ufqfpn, 7 x 7 mm
پیکربندی پین برای STM32F051C8U6 (پکیج 48-ufqfpn, 7 x 7 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای STM32F051C8U6.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
STM32F051C8U6 مناسب است برای 6 کاربردs: Compact Sensor Hub Controller, Industrial Interface Controller, Access-Control Peripheral, Small Motor Controller, Connected Measurement Product, Low-Power Consumer Controller.
Compact Sensor Hub Controller
The STM32F051C8U6 fits a compact sensor hub because its 48 MHz Arm Cortex-M0 core can execute sampling, filtering, and control logic while the 64 KB Flash stores application firmware. The 48-UFQFPN 7 x 7 mm package preserves PCB area in compact sensing products. A designer can connect digital sensors through the available GPIO and timer resources, then use a communication peripheral for host or gateway data transfer. Before finalizing the design, confirm the exact peripheral assignments, interrupt requirements, and pin multiplexing in the STM32F051C8 documentation.
پیشنهادی
Industrial Interface Controller
The STM32F051C8U6 is suitable for a small industrial interface that must translate between sensors, actuators, and an embedded supervisory system. Its 48 MHz Cortex-M0 processing core provides dedicated embedded-control performance, while 64 KB of Flash accommodates protocol handling and application logic. The 2.5 V to 3.3 V operating range supports conventional 3.3 V interface electronics. In an industrial design, isolate external field wiring appropriately, define safe fault states, and verify temperature, ESD, and EMC requirements for the installation environment.
پیشنهادی
Access-Control Peripheral
The STM32F051C8U6 can manage a compact access-control peripheral that reads credentials, controls an electromechanical lock, drives indicators, and reports status to a host. Its 64 KB Flash is suitable for a modest firmware image, while the Arm Cortex-M0 core handles GPIO, timing, and communication tasks in a small 7 x 7 mm footprint. Use fail-safe or fail-secure actuation logic appropriate to the installation, and validate the complete pin map against the exact ordering code. The 3.3 V supply operation simplifies integration with common digital logic levels.
پیشنهادی
Small Motor Controller
The STM32F051C8U6 is appropriate for a small closed-loop motor controller based on timers, GPIO, and embedded control firmware. A 48 MHz Cortex-M0 core can execute commutation, speed, or position-control logic, while the 48-pin UFQFPN package keeps the controller compact. The 64 KB Flash provides room for control code and configuration tables. Confirm the specific timer channels, encoder interfaces, PWM outputs, and fault-detection pins used by the motor system. Add appropriate driver protection and verify thermal performance at the intended motor current.
پیشنهادی
Connected Measurement Product
The STM32F051C8U6 supports a compact measurement product that acquires data from external sensors and forwards processed results over a serial or bus interface. Its 48 MHz Cortex-M0 core is suited to deterministic sampling and control, and 64 KB of Flash provides a practical code budget for drivers, communications, and application logic. The compact 7 x 7 mm UFQFPN package reduces board area in portable instruments. Select the external interface transceiver according to voltage, reach, and isolation requirements, and validate signal-integrity settings against the chosen bus speed.
پیشنهادی
Low-Power Consumer Controller
The STM32F051C8U6 is well suited to a low-power consumer device that coordinates buttons, indicators, sensors, and a low-rate communications link. Its 48 MHz Cortex-M0 core provides ample control performance, while the 2.5 V to 3.3 V operating range supports compact 3.3 V systems. The 48-UFQFPN package enables a small board, and 64 KB of Flash provides room for a user-interface state machine and protocol handlers. Use low-power modes only after reviewing clock, peripheral, and wake-source behavior, and size the decoupling network for the selected regulator and operating mode.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای STM32F051C8U6 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | STM32F051C4U6 | STM32F051C6U6 | STM32F072C8U7 | STM32F050C4U6 | STM32F050C6U6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-UFQFPN (7x7) | 48-UFQFPN (7x7) | 48-UFQFPN (7x7) | 48-UFQFPN (7x7) | 48-UFQFPN (7x7) | 48-UFQFPN (7x7) |
| Processor Core | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 16 KB | 32 KB | 64 KB | 16 KB | 32 KB |
| Operating Supply Voltage | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V |
| Special Feature Difference | 64 KB STM32F051 density | Lower-memory STM32F051 density | Lower-memory STM32F051 density | Related STM32F0 family with a different peripheral feature set | Lower-memory STM32F050 density | Lower-memory STM32F050 density |
تفاوتهای کلیدی
- Higher Flash capacity than lower-density STM32F0 candidates (در مقابلSTM32F051C6U6)
- Larger memory budget than STM32F050 options (در مقابلSTM32F050C4U6)
- Same core frequency and Flash capacity as the closest documented related candidate (در مقابلSTM32F072C8U7)
یادداشتهای طراحی
Use the manufacturer package drawing for the 48-UFQFPN 7 x 7 mm footprint and preserve the exposed-pad geometry. Place supply decoupling capacitors close to the associated pins, provide a continuous ground reference beneath the device, and verify the thermal-pad net against the selected schematic. A generic QFN-48 land pattern is not a substitute for the official drawing because pad dimensions and exposed-pad construction determine solderability.
Do not treat matching package dimensions as proof of a drop-in replacement. Before substituting an STM32F0 device, create a pin-by-pin matrix covering power, ground, boot, reset, debug, clock, communication, timers, and GPIO functions. Also check interrupt vectors, peripheral register differences, startup code, and clock initialization. The STM32F072C8U7 has matching headline CPU and Flash values, but its peripheral compatibility still requires schematic and firmware validation.
Route the exposed pad into the PCB ground plane with multiple thermal vias where permitted by the package drawing and assembly process. Estimate junction heating from actual operating current and switching activity rather than CPU frequency alone. The embedded thermal path is most effective when the board has sufficient copper area, the vias are not starved by isolation requirements, and the enclosure does not trap heat. Validate the final assembly under worst-case ambient temperature.
Design the 2.5 V to 3.3 V supply network around the MCU's selected operating mode and peripheral load. Keep high-current switching loops away from sensitive input references, confirm startup and brownout behavior, and maintain the decoupling values and layout specified by STMicroelectronics. Because the device combines analog and digital functions, a clean return path and correctly placed bulk and high-frequency capacitors are important for repeatable peripheral performance.
اطلاعات انطباق
The exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the product results and require confirmation from the manufacturer or applicable compliance documentation.